How to create a button on a form that automatically creates a new page or form with pre-filled field

I'm trying to create an advanced workorder for my company. In short, I need to have a summary page that includes pertinent contact and matter information but then have the users have the ability to essentially click a button and have it auto-generate and populate certain information in a new form (or page). In this instance, it's trying to take summary form and then allow it to expand to an additional 5 forms, but not necessarily always have all the unecessary details or modules if not applicable for that job.
Any suggestions would be appreciated.

Thank for reply.
The computers are in different locations, but yes it's possible, the users in this enviroment are all local administrator of the machines, and we can distribute the script centrally from the DC automatically
Acrobat use Java, right? I'm not so expert in java, but something about it could not be so difficult to manage.
Do you know some place where i can get some info about JS and acrobat?

Similar Messages

How to create a new page as a hyperlink to an external one?

I've been trying to solve this for like 2 hours and still haven't found the way!
When you create a new page in iWeb, it automatically adds its name into the navbar and creates a new page and folder with its content. Well, I want to create a new page that is a link to an outside webpage opening in a new tab. How do i do this? Editing the new page .html? I've tried that, but what should I write?
Anyway, hope somebody can give me a hand...
Thanx!

This may be what you're looking for:
http://discussions.apple.com/message.jspa?messageID=9105295#9105295

How to create a new page in SRM5.0 and return data

Hi,Everyone,
    I want to create a new page,for example:
     when user select a po item,and then we want to create a custom button at po item basic data screen,when user click the custom button,
    we want to pop up a new page for our custom logic.at the pop up page,when user complete some data selection, and then the data should return or refresh to po item.
   And now,I have a question for that:
    How can i return or refresh data(for example,the price) to po item. I have create a bsp page for our pop-up page.
Thanks.
andy

HI,Masa,
   Thanks for your reply. and it's a very useful ways.and i will consider for that way.
   But i think if there have any other way ?
   for example: i create a bsp page for our new page,and through the custom button of po basic item page. and that can realize.but how can i return data to the select item.
Thanks.
Regards,
Andy

Excel import to create forms with pre-populated fileds

Can/how do I create forms with pre-populated fields from an external data source like Excel? Example: I would like to create 100 forms with pre-populated name fields from an Excel document containing 100 names.

Hi,
Sorry, we don't currently support creating forms with pre-filled data.
Regards,
Brian

Is it possible to create a single texbox? and how to delete a button on a form? please asap, badly n

Is it possible to create a single texbox? and how to delete a button on a form? please asap, badly needed it right now. thx -regards gustavo

Hello Gustavo,
You can create a single textbox using the textbox option here (This is for you to enter text - not for the visitor): http://jingsite.businesscatalyst.com/jing/2013-09-30_2212.png
If you want to create a textbox for the visitors to enter text, then you need to enter a form, and you can delete the "message" field from the "simple contact" form, but not the name and the email fields (those are mandatory and can't be deleted).
You may want to check external forms in case you want to have the form rather customized, to check if you can have forms with single textbox. An example would be "Jotform".
Hope this helps.
Cheers
Parikshit

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this?

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review

I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O.

How to create a new row for a VO based on values from another VO?

Hi, experts.
in jdev 11.1.2.3,
How to create a new row for VO1 based on values from another VO2 in the same page?
and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
How-to declaratively create new table rows based on existing row content (20-NOV-2008)
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
I have tried:
1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
3.add: Create insertinside Createwithparams->Nameddata(amount),
4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
java.lang.NumberFormatException: For input string: "Amount"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
Can anyone give some suggestions?
Thanks in advance.
bao
Edited by: user6715237 on 2013-4-19 下午9:29

Hi,CM,
I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
My principal requirement is as follows:
1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
--so it's better to implement it in UI rather than in EO.
2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
--little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
In order to get full information for the requirements of my use case, can take a check at:
How to set default value for a VO query bind variable in a jspx page?
(the end half of the thread: I have a more realworld requirement similar to the above requirement is:
Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
Regards
bao
Edited by: user6715237 on 2013-4-19 下午11:18
JAVE->JAVA

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create a new repository in EP 6

I was wondering how to create a new repository in EP 6 SP2 CM. I am farmiliar with using repository managers, but I just want to create a new repository similar to the dfaul repositories that are provided by sap, such as "discussions or documents". The reason is that I want to be able to report "only on the size of this repository"
Thanks
Jeremy

Jeremy -
You can create a CM repository using the following path:
System Administration -> System Configuration -> Knowledge Management -> Configuration -> Content Management -> Repository Managers -> CM Repository
Click on the New button.
Enjoy!
Kyle

How to create a new folder in my iPad hotmail?

How toI create a new folder in my iPad hotmail?

You can only do it with IMAP email account; to do this:
1. Go to your email account in the Mail app and look at the window where your Inbox, Trash folder and Sent folder are.
2. Tap the Edit button
3. Tap Add Mailbox (bottom)
Note: If there is no Edit button, your email account is not a IMAP account

How to create a new line in label in Xcode

How to create a new line in label. for example I have two buttons & one label. when i press first button, l want to change the label text to "Hello World". then when I press the second button, on the same label I need to display"Good Bye" on the next line in xcode 5?
I want to display the lablel like below:
Hello World
Good Bye

I am using Xcode to develop an app for iOS.
I tried using multi-line label & belwo is my code.
- (IBAction)change:(UIButton *)sender {
self.Screen.text = @"\nHello World";
- (IBAction)newChange:(UIButton *)sender {
self.Screen.text = @"\nGood bye";
everytime when i pressed the button, it replacing the whold lable text instead of adding the second line.

How do I set up a .pdf form to save filled data without having to print the form?

How do I set up a .pdf form to save filled data without having to print the form? I have provided my clients a lifecycle .pdf form they can use to record data for unique client meetings. They want the ability to save their completed data whenever they use the form under a unique file name. I've told them the only way I know how to do this is to print the completed form as a .pdf document and then save it.
Is their a way to save the data to a unique file name without printing the filled form?
Is there a way to reset the form with blank fields after saving? or to add a clear fields button?
Thanks.

If you reader extend a pdf using livecycle reader extensions then you can save the filled in data - this is true if you are using Adobe reader to view the PDF's. If you open it in Acrobat then the functionality is already there.

Best Solution for Creating an Onlne Purchase order form with multiple calculation fields

I am a bit confused. Our school has a Forms Central account which works great for our registration forms but I need to find a solution for creating an online purchase form with multiple calculation fields - I know that forms central does not support calculation fields (too bad) but I know that Acrobat Pro does... soooo...
Can you create the forms in Acrobat and then somehow integrate the advanced features into forms central? Do they talk to each other? Is this easy to do? .... I guess another way to putting it is can you create the forms in Acrobat including all of the advanced features for payment calculation and then host it online using Forms Central to manage and collect the data? (I guess that really is my question)
Thanks (how does this compare to a solution like Formstack?)

Hi, thanks.
The naming convention was the consistant up until a point when I read that you need a '.' syntax (?!) - does anyone know if this is true?
Attached is a version with Bernd Alheit's suggestion and with all the naming of the fields being consistant. It's still not working for me though after doing this and I'm stuck as to why, because I think it should work. I've also tried writing the calcualting line of code in the same manner that Bernd Alheit suggests before I came on here, and it wouldn't work then.
As with any coding, it must be something to which I have done, but I can't see it anywhere
Any ideas? Thanks for helping me
Cheers

How to create a new user over HTTPS

Hi. I have set up conf.xml and web.xml so that when the user accesses a page in the secure area of the website, then they are taken to a login page where they enter their username and password and the form calls j_security_check on the server. All this happens over SSL as the transport garauntee is CONFIDENTIAL. But how to create a new user over HTTPS? If I have a create new account pages in the secure area of the website, then the only way the user can access these pages is by logging in, but they don't have a login as yet.

An update. It looks that if the auth-constraint section (which lists the roles that can access this area) is missing, then everyone can access the region and it is over HTTPS. So far, the following seems to be working
   <security-constraint>
      <display-name>View My Account</display-name>
      <web-resource-collection>
         <web-resource-name>My Account Area</web-resource-name>
         <url-pattern>/myaccount/*</url-pattern>
      </web-resource-collection>
      <auth-constraint>
         <role-name>myrole</role-name>
      </auth-constraint>
      <user-data-constraint>
         <transport-guarantee>CONFIDENTIAL</transport-guarantee>
      </user-data-constraint>
   </security-constraint>
   <login-config>
      <auth-method>FORM</auth-method>
      <realm-name>Form-Based Authentication Area</realm-name>
      <form-login-config>
         <form-login-page>/newaccount/login.html</form-login-page>
         <form-error-page>/newaccount/loginerr.html</form-error-page>
      </form-login-config>
   </login-config>
   <security-role>
      <role-name>myrole</role-name>
   </security-role>
   <security-constraint>
      <display-name>Create New Account</display-name>
      <web-resource-collection>
         <web-resource-name>New Account Area</web-resource-name>
         <url-pattern>/newaccount/*</url-pattern>
      </web-resource-collection>
      <user-data-constraint>
         <transport-guarantee>CONFIDENTIAL</transport-guarantee>
      </user-data-constraint>
   </security-constraint>

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

How to create a button on a form that automatically creates a new page or form with pre-filled field

Similar Messages

Maybe you are looking for