How to create a 'functioning' Multi angle track? - Help Please

hi all,
i've spent almost three days working all the bugs out of a dvd with 10 multi angle tracks
(thats 10 different tracks with two different angles each).
after hours upon hours of tweaking i have it working fine in DVDSP simulator (perfect really, everything is so sweet!) only when I burn/build/format the project the multi-angle functionality is lost.
i've tried the dvds on two different players, and two different computers, even the same mac i built the DVD on and the second angle just doesn't seem to exist?
can anyone tell me if there is a setting i'm missing or... is the switching between angles something you can only do inside DVDSP simulator... some kind of bad joke on apple's part???
please please pretty please - help!!!
Message was edited by: claudia 639

claudia 639 wrote:
hi all,
i've spent almost three days working all the bugs out of a dvd with 10 multi angle tracks
(thats 10 different tracks with two different angles each).
after hours upon hours of tweaking i have it working fine in DVDSP simulator (perfect really, everything is so sweet!) only when I burn/build/format the project the multi-angle functionality is lost.
i've tried the dvds on two different players, and two different computers, even the same mac i built the DVD on and the second angle just doesn't seem to exist?
can anyone tell me if there is a setting i'm missing or... is the switching between angles something you can only do inside DVDSP simulator... some kind of bad joke on apple's part???
That's a very complex project to cut your multiangle chops on. Make a copy of the project and discard all but one of the tracks so you have something with fewer resources to juggle.
I've done dozens of multiangle projects in DVDSP over many years since the featgure became available in, I think, DVDSPv2.5 or so, maybe v3. They all have worked without any hitches so we know there's nothing wrong with the software. There are two ways you can use the option but the most reliable is to have all angles exaactly the same length, to the frame.
Assuming you have taken into account the bit rates required to hold all of your video assets on the single disk, I cannot think of anything that would disable or prevent multiangle from working since it is part of the basic DVD specification.
If the alternate angle's resources are not being burned to disk, the multiangle function will not be active. You might be able to view the processing log to see if the names of your b-roll files are being processed at all.
bogiesan

Similar Messages

How do I setup Multi Angle tracks to avoid Incompatible GOP?

I've been reading through some of the previous threads in an attempt to figure out how to set up my mult-angle tracks in FCP so I don't get the "Incompatible GOP structure" message in DVD Studio Pro. But nothing I do seems to work. Is there a way to actually do this without getting that error message?
yes, I tried making "self-contained" movie files.
My recent (partial) multi-angle project is showing the video is off by 6 frames when I line it up to the original chapter marker. I am able to slide back the multi angle tracks to line it up to the correct video frame but DVDSP will not Build the file saying that it is "missing marker for angle situation" & I cannot place a marker exactly where the encoded partial multi angle starts.

NO...Here's a rundown:
With multi-angle tracks, all streams must be the same length. With mixed-angle tracks, all alternate streams in each mixed-angle section must be the same length.
All streams must have the same resolution and frame rate.
The length and pattern of GOPs (Group of Pictures) must be the same for all streams (angles). If you are not using the integrated MPEG encoder, use an encoder that allows you to turn scene detection off.
All GOPs should be closed. You will not be able to cleanly switch between the streams if you use open GOPs.
Use a CBR encode
Have Googled all the info a read carefully?
http://www.google.com/#sclient=psy&hl=en&source=hp&q=dvd+studio+pro+multi+angles &pbx=1&oq=dvd+studio+pro+multi+angles&aq=f&aqi=g-v1&aql=&gs_sm=e&gs_upl=1380l725 8l0l7352l27l20l0l4l4l1l966l8441l0.2.0.1.2.3.6l14l0&bav=on.2,or.r_gc.r_pw.&fp=16c 82828e92b6176&biw=1024&bih=578

How to Create a Functiona Query

Dear all,
Could any body detail me how to create a functional query. Please give me step by step procedure to create a query.
I would appreciate if you can give me a material with screen shots. Your help will be highly appreciated.
Thank you
Raghu Ram

Hi Raghu,
Go through this document it may help you,
SAP Query
Step 1: Create User Group SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Group: Initial Screen -
Enter User Group Code (self named)
Click on Create
b) In the User Group (Code): Create or Change pop-up window -
Enter the User Group Description
Click on Save
c) In the Create Object Directory Entry pop-up window -
Ö Click on Local Object button
Ö The User Group Created is saved
Step 2: Create User Group SQ02
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Infosets
a) In the Infoset: Initial screen -
Ö Enter Infoset Code (self named)
Ö Click on Create button
b) In the Infoset: Title & Database Screen -
Ö Enter Description of Infoset in the Name field
Ö In the Data Source selection: Select appropriate Data Source by clicking
the radio button
· Source the data can either be multiple tables OR single table. There are 4
options for the user to select from
Ö Click on Continue (Enter)
Ö Selected Table gets displayed in the Infoset : Initial Screen
c) In the Infoset: Initial Screen -
Ö Click on Insert Table button
d) In the Add Table Screen -
Ö Enter the Table Name that is to be inserted
Ö Click Continue (Enter)
e) In the Infoset: Initial Screen -
Ö Click on Back button
f) In the Field Group Defaults pop-up Screen -
Ö Select Appropriate Field Group Option by clicking on the radio button
· there are 3 options to select from. User can select Empty Field Group
option and then select the data fields in the steps explained further.
Alternatively, User can select an option which clubs all the data fields
From all the tables selected
Ö Click Continue (Enter)
g) In the Change Infoset Screen -
· the left side lists the Tables that the user has selected in step b, c & d
· In the right side, system creates field groups, one for each table listed in the
left part. Initially, the Field Groups are empty
Ö In the Left Side, Click on the arror next to the table name and expand and
display all the data fields in the table
Ö Select a Data Field from the expanded Table view, which is to be added to
the Field Group on the right.
Ö Select a Field Group on the right side, in which Data Field selected above
has to be added
Ö Right click on the Data Field selected and click on Add Field to Field Group
Ö The selected Data Field gets added to the selected Field Group, which is
indicated by an arrow next to the Field Group.
Ö Carry out the steps above to add the required Data Fields to the respective
Field Groups
Ö After transferring Data Fields to Field Groups click on Generate button
h) In the Create Object Directory Entry Screen -
Ö Click on Logical Object button to generate the infoset
i) In the Change Infoset Screen -
Ö Click on the Back button
j) User is taken back to the Infoset: Initial Screen which displays the
created Infoset record.
Step 3: Assigning User Group to Infoset SQ03
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > User Groups
a) In the User Groups: Initial screen -
Ö Enter the User Group for which Infoset is to be assigned
Ö Click on Assign Users & Infosets button
b) In the User Group: Assign Users Screen -
Ö Click on Assign Infosets button
c) In the next screen, select the Infoset, which needs to be attached to the
User Group selected
d) Click on the Back button
Step 4: Creating Query SQ00 & SQ01
Follow the menu path SAP Menu > Tools > ABAP Workbench > Utilities > SAP Query > Queries
a) In the Query from User Group: Initial Screen -
Ö Click on Other User Groups button
Ö In the pop-up screen, User Groups, select the User Group for which the
Query has to created. The pop-up screen closes.
Ö Enter the Query Code in the Query field
Ö Click on Create button
b) A pop-up screen Restrict Value Range shows the list of Infosets assigned to
the User Group
Ö Select the Infoset for which Query has to be created
c) In the new screen Create Query: Title, Format -
Ö Enter the Description of the Query in the Title field
Ö Click on the Next Screen button
d) In the Select Field Group screen
Ö Select the Field Groups from which Data Fields have to be selected for the
Output
Ö Click on the Next Screen button
e) In the Select Field screen -
Ö Select the Data Fields, which should appear in the output
Ö Click on the Next Screen button
f) In the Screen Selection -
Ö Select the Data Fields for the selection criteria
Ö Enter the sequence in which the selected fields would appear in the input
screen of the query.
Ö Define if the selection criteria should be Single Value or Multiple Value Range
by clicking in the appropriate check boxes
Ö Click on the Basic List button
g) In the screen Query Layout Design -
Ö Select the Output Fields from the Data Fields section by clicking the
appropriate check box
Ö Change the sequence of Data Field columns if required
Ö Click on the Test button to test the query created
h) On the Test Query screen click Continue
i) In the Query screen -
Ö Enter the selection criteria
Ö Click on Execute button
j) Save the Query created
Step 5: Running the Query SQ00
a) In the Query From User Group: Initial screen
b) Click on Other User Groups button to select the User Group
c) In the pop-up screen User Groups select the User Group
d) System lists all the queries created for the User Group
e) Select the appropriate Query
f) Click on Execute button
g) User is taken to the Selection screen
h) Enter the selection criteria and click on Execute button
i) System runs the query and gives the output
Regards,
Murali.

How to create a function with ref_cursor as parameter in OWB 10.1

Hi,
Can any one help me how to create a function with ref_cursor as parameter in OWB 10.1.?
Its urgent. Please help me.
Thanks,
Siv

Hi David,
Thanks for your reply.
Before going for this function, I need to create a package in transformation node in owb module.
My package is as follows,
Create or replace package 123
type xxx is RECORD ( parameters);
type yyy is RECORD (parameters);
type aaa is table of yyy;
type bbb is REF CURSOR return xxx;
type ccc is record (parameters);
type ddd is ref cursor return eee;
END;
How can I create the above kind of package manually in OWB 10.1 (Should not to import the package)
Please help me its urgent.
Thanks,
Siv

How to create user function in Data Functions in Query Designer?

Could someone tell me how to create user function in Data Functions in Query Designer?
I mean function like "NDIV0" in Data Functions.
SAP BW 3.x.
Query Designer (SAP BW 3.x)

Hi check the following URL, it gives how to add in Formulas in formula Builder, not in DataFunctions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f095592f-42f7-2a10-6ab1-c836a559b48f
Thanks
Reddy

How to create search function (af:query) using method in java

hi All..:)
i got problem with search custom (af:query), how to create search function/ af:query using method in java class?
anyone help me....
thx
agungdmt

Hi,
download the ADF Faces component demo sources from here: http://www.oracle.com/technetwork/testcontent/adf-faces-rc-demo-083799.html It also has an example for creating a custom af:query model
Frank

How to create a function group (step by step)?

I would like to know how to create a function group, step by step.
step 1 do....
step 2 do ...

also,
Go to SE80 for creating a function group.
Also have a look at below link.
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ef5454211d189710000e8322d00/frameset.htm
i.e.
TCODE - SE80
Choose - Function Group ,it wil ask to create..
Create and then activate..give a name starting with Z .
Other way is go to tcode SE37.
In the menu,there is a option in sub menu for creating function group.
Just create it by clicking that and give names starting with z or y.

Pls give some ideas? how to create a function.

Make an MS-Access form to accomplish:
Use a list box to display part-time employees and their assignments (SSN, Hours, FullName). Include only those who currently work a total of less than 40 hours/week.
SSN , Hours and FullName are stored in 2 different table.
I have no idea how to implement this function. How to create this function to get SSN, Hours and LastName and FirstName (RecordSet which will be used in application)?
Thanks alot!

I'm afraid this is an Oracle forum, not an MS-Access forum.
;)

How to create menu function for link to open file

Hi,
I need help how to create menu function for link to access file and allow user to save the file when click on it.
The file will keep inside server.
Thank you.
Regards,
Wilson

I need help how to create menu function for link to access file and allow user to save the file when click on it.
The file will keep inside server.AFAIK, you have to write a custom code to achieve this and Oracle does not provide this functionality.
If you want to store the file as an attachment, please see (How to Store Image/PDF Attachments on the File System in 11i and R12 (like Attachment File Directory) [ID 294525.1]).
Thanks,
Hussein

How to Create the Function Module Exit

Hi,
How to Create the Function Module Exit. Please tell me the step by step procedure.

Hi,
Check this link for how to create the function module exit..
http://sap.niraj.tripod.com/id62.html
Thanks
naren

How to create charasteristic value variable step by step please?

How to create charasteristic value variable step by step please?
I searched the previous threads it is not listed.
I will assing points to only valuable information.
York

Hi Les,
http://help.sap.com/saphelp_nw04/helpdata/en/ac/789b3c4d4d8d15e10000000a114084/content.htm
In the left hand side of the query designer, find your char and under than there will be a button with text called Characteristic Value Variables. Right click this and choose New Variable. This will open the variable wizard. You need to follow the screen to define a technical name and description, the processing type, the user entry options and if the variable will accept single or multiple values, and also if you want to set a default value.
Hope this helps...

I Connected My IPad 1st Generation To The Computed To Have It updated And I Lost All of My Pictures, How Do I Get Them Back?? Help, Please!

I Connected My IPad 1st Generation To The Computed To Have It updated And I Lost All of My Pictures, How Do I Get Them Back?? Help, Please!

Did you backup the iPad first? If you did - restore from the backup in order to restore the photos in the Saved Album on your iPad. If the photos were synced to the iPad, then sync them back again via iTunes.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
If you did backup first, you will be restoring your most recent backup and you should be OK. But know that when you restore from a backup, you restore everything that is in that backup onto the iPad .... All documents, device settings, all data and so on. You cannot just select photos to restore to the iPad. It's all or nothing.

Hi - I'm trying to sync iBooks on my Macbook Pro with iBooks running on my iPad. I have some pdf's download from the net I want to share between devices and I can't work out how to sync the two devices. Any help please?

Hi - I'm trying to sync iBooks on my Macbook Pro with iBooks running on my iPad. I have some pdf's download from the net I want to share between devices and I can't work out how to sync the two devices. Any help please? I'm running Mavericks

Thanks for your help Brij011 - much appreciated. Apologies as I'm a newbie but I've looked at the info for synching and I appear to have all the switches flicked on my iPad. Does the iPad and iBooks only sync in iCloud for purchases as I appear to be doing something wrong. I could sync ok when books was in iTunes but since migrating to Mavericks I think I'm doing something wrong!!

I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

How to Create a Function module z_create and to track the error records?

I want to create a function module z_create which will insert the data from the internal tables gt_model_master and gt_model into the corresponding database custom tables y_model_master.
Secondly if any error is encountered during the above updation, then how to track those error records ?

HI,
check the sy-subrc ,if it is zero the insertion is success,otherwise use
message class.
if sy-subrc ne 0.
message e052(zmessage).
endif.
Edited by: rakesh dhudipala on Feb 12, 2008 2:33 PM
Edited by: rakesh dhudipala on Feb 12, 2008 2:33 PM

How to create a 'functioning' Multi angle track? - Help Please

Similar Messages

Maybe you are looking for