How to create a specific calculation
Hi all
I would like to create a calculation using the sales amount as measure and the geography as dimension
The hierarchy of the geography is:
ALL
-Region
--Country
---Store
And the calculation I want is:
Sales of a Country/ SUM(sales of its Region)
using level based measures allows me to create
Sales of store / SUM(sales of Country)
Sales of store / SUM(sales of Region)
Sales of store / SUM(sales of ALL)
because the sales are aggregated at the lowest level wich is 'Store'
Any one knows how I can create this in the repository?
Regards
Hi,
I don't really see the problem, because the solution is quite easy:
1. Create one level based measure: Sales by Country
2. Create another level based measure: Sales by Region
3. Create a logical column with the calculation Sales by Country / Sales by Region based on the logical columns from 1 and 2.
Regards,
Stijn
Similar Messages
-
Can't figure out how to do a specific calculation
I have a report that is broken into columns in the detail section. From the data in that section I need to create a formula that looks something like the following:
(column A - Column B)/column A
Now because I have it formatted with multiple columns each column heading is the same field just pulling in different years.
So even though Column A is 2011 and Column B is 2010 the field is still "TaxYear" for both columns.
How can I make this calculation happen and populate in another area of the data? Now the tax year won't always be 2010 or 2011. But the columns will always be there.
I hope I am making sense and that someone can help me.
Thank you in advance,
ErinI suppose so but I won't see it until about 10 am eastern standard time. click on my name to get address to send it to.
You should know that SAP frowns using this method of solving problems though. Would be better if you post here so all can see.
Be sure to include info of field names and formulas used.
Edited by: DebiHerbert on Dec 7, 2010 12:38 AM -
How to create printer specific font.
Hi,
I want to create printer specific font to print a script(cheque) on FI02 printer.
We have some Z..printer specific fonts in SE73 but I don't
find any create button there..how to create..help me out.
Regards
SudhaUse SPAD transaction create ur own format.
other information
To upload font first locate ur file for that font in this case VERDANA,
normally u will find this file in C:\windows\font copy that file from there in
some other directory. then goto transaction code SE73 give ur font name
in SAP starting with Z and give ur font file path.
True Type-Font installiern
regard
vinod -
How to create customer specific fields within PC 10.0?
Hello,
for previous Process Controls versions 2.5 and 3.0 it was available two how-to guides to create customer specific fields. Nevertheless so far I couldn't find those versions for PC10.0.
Does anyone have them? Or know if the 3.0 version is also valid for 10.0?
Regards
Andre YujiDear Johannes,
We have a few administration transactions that you can use on back-end. For example:GRFN_STR_CHANGE -GRFN_STR_CHANGE-Change Process Control
as well as RE_RHGRENZ4 to Set a new end date to the objects.
At last case, you can run the program RHRHDL00 thru SE38 Tcode.Be carefull because this program delete the object from database.
Regards,
Karina Atonaidan -
How to create a simple calculated measure ?
Hello,
I'm having difficulties creating a very simple calculated measure within OBIEE administrator. Let's say I have a dimension "product" with attribute "product price" and a measure "sales count". I'm trying to define in the "Business Model" layer the calculated measure "total sales". In order to do that I defined it as as a Logical Column with expression "product price" * "sales count".
However OBIEE doesn't compute what I'm expecting, it does in fact a cartesian product of the products and the grand total sales, which doesn't make sense. To alleviate that I tried to define the measure as associated to the Product level, then I get the computations right but the sales by product are not summed into a grand total.
Anyway this seems like a very basic thing to do but I've not been able to find any documentation about it; the internal "Help" documentation is extremely limited. Is there another source of documentation that I'm not aware of ?
Thanks for your help,
ChrisHi there again,
I'm coming back to you regarding the calculated measure above. As advised, I defined it using physical columns and am - almost - able to get the correct results. However I notice that the measure is not correctly aggregated over the "product" dimension. More specifically what happens is that the products are organized into a level-based hierarchy; only the leaf elements have an attibute "price"; the upper nodes in the hierarchy group different products together with different prices.
The "total price" measure for such a node should be the sum of "product price" * "sales count" for all underneath nodes in the hierarchy, which is the way it is done for instance in AWM. However with the measure defined as above, I only get NULL values for upper nodes, due to the fact that "product price" is NULL for those levels and thus yields a NULL result.
I've tried to circumvent the problem by associating the measure to the leaf level of the "product" hierarchy in the Properties -> Levels tab, however this doesn't seem to do what I want, it only forces the computation to happen at the lowest level of the hierarchy. What I would like is for the measure to aggregate to upper levels just as it would were it defined directly in AWM.
Do you know how to do that ?
Thanks for your help!
Chris -
How to create a specific property node w/ VI script
I am writing a VI script to work with some multi column listboxes. I need it to create a property node that gets a reference to the ItemNames field. I see that I can create a property node via the invoke node method Create.Property Node, but how to get the ItemNames field specifically I so far can't figure out. Can anyone help?
To be clear, I am writing code that looks like this:
...and when I run the script, I want it to produce this:
Right now it produces the MCL as expected, via the New VI Object node...but I don't know how to get the ItemNames created automatcially. I thought it might be in the PropItems array but so far no luck.
thank you
Solved!
Go to Solution.The output of "PropItems[]" will be a one element array. Index that element and wire the reference to an invoke node. Select the method "SetProperty".
-
How to create a specific audio track in arrange
There's gotta be something simple I'm missing. In Logic 7 you could create an audio track in the arrange and then click to open a drop-down menu to select any audio track number you wanted to assign it to.
I don't see how to do that in 8.
All I'm trying to do is create an audio track of audio 9 in the arrange. Currently, 4, 6, 7 and 11 are in the arrange. I can go to number 7 and hit "new track with next channel strip" until 9 shows up and delete the rest (it starts by adding 1, which currently isn't used, etc., 'til it gets up to 9) but that can't be the only way to do it.
Can someone give me a tip?
Thanks!!Desha Dunnahoe wrote:
There's gotta be something simple I'm missing. In Logic 7 you could create an audio track in the arrange and then click to open a drop-down menu to select any audio track number you wanted to assign it to.
I don't see how to do that in 8.
Simply create the new audio track, and the control/right click on that track
You'll see "Reassign Track Object" > Mixer > Audio >
and from there you can select specifically what audio track you want that new track to be. -
How to Create Interface specific Monitoring Node in RZ20
Is it possible to create Interface/namepsace specific Monitoring node in CCMS RZ20. If yes, then how??? I need to have this node in ECC system.
Thanks and Regards,
Pallavi SinghHi,
It is possible to achieve this using the MTE class SXMB - this will allow thr highlight of errors within the local IE.
Is this what you need ??
Kind regards
Colin. -
How to create vendor specific GL acc.
Dear Guru,
Upon GR the GL acc. picked based on valuation class that set in material master. That valuation class has been tag with GL acc. in OBYC. I attached herewith the scenario upon GR
3210000800 89 STK - FINISHED GOODS 8,396.27250 MYR GR
3330001001 96 OPGG - ACRL PUR (new 8,396.27250- MYR GR-2077
2320111000 40 PUR FG LE 8,396.27250 MYR GR-2077
2360111600 50 PUR OFFSET 8,396.27250- MYR GR-2077
May I know how we may create different GL acc. for specific vendor without touch existing GL acc. Or is that possible to create additional accounting such as below to offset the above clearance.
2320121200 DT PUR FG LI - EM
2320111000 CT PUR FG LE
By doing this I believe this may go to vendor specific GL acc. (This is Inter company Purchasing so we wanted to change according to company GL acc.)
Please advice.
rgds,
nanthaHi
Vendor cannot be linked to a special GL account except Reconcialation account.
Thanks -
How to create customer specific InfoTypes in CRM?
Hi folks,
we want to distribute customer specific InfoTypes from HR to CRM. Thus we have to create these InfoTypes in CRM. Does anyone know how to do so? In HR this is done with TA PM01 which does not exist in CRM.
Thanks!
MartinMartin,
Yes I think just using a BADI and storing in custom tables is the easiest approach in your case. However if these infotypes are employee data contained in personnel administration, then you should consider extending the Business Partner via the eewb. You would still then enhance the IDOC and then extend the data transfer to the new attributes in CRM.
If it is just organizational data attributes, then you can either do custom tables, or try to create new infotypes via manual configuration in the CRM system.
Take care,
Stephen -
How to create a specific value in applescript
Hello guys,
My question goes as follows:
i want to create a value that is : 2001-12-01
--script on--
set days1 to 01
set months to 12
set years1 to 2001
set specialvalue to years1 & "-" & months1 & "-" & days1
--specialvalue should be 2001-12-01
--but in fact it returns a weird value in which - is still between apostrophes
--how do i get specialvalue? because it is used as a repeat function and i need them in that order
--script off--
thanks in advanceHello guys,
My question goes as follows:
i want to create a value that is : 2001-12-01
--script on--
set days1 to 01
set months to 12
set years1 to 2001
set specialvalue to years1 & "-" & months1 & "-" & days1
--specialvalue should be 2001-12-01
--but in fact it returns a weird value in which - is still between apostrophes
--how do i get specialvalue? because it is used as a repeat function and i need them in that order
--script off--
thanks in advance -
How to create a specific master detail
hi,
my problem is that i have 3 tables(tab1,tab2,tab3);
tab1 is master of tab2.
tab 2 is master of tab3.
i would like to make a master detail page between tab1 and tab3 without using tab2.
i am using jdev10.1.3.2 and ADF BC Swing.
can you help me.
7rouzi've the same kind of treatement in my application.
i did it this way.
i created a view object based on entity tab1.
i created a view object based on a join of entities tab2 and tab3
(don't forget to create associations between your 3 entites first)
i then created a viewlink between these two views.
In the application module, i added the first view and then the second view via the first view.
You can then use this to created your master/detail relation from the data control palette.
hope it helps.
J. -
How to create a specific title template?
Hi!
So I'm creating a video containing multiple interviews. During the interview, I want to create some text boxes next to the person being interviewed, which contain some of the keywords from the spoken text.
I'm trying to get the following result:
As for now, i'm constantly manually creating rectangles which I have to scale to the text to fit as a proper background. Is there any way to create a title template so that the background scales automatically to the text? So if I would add a line at the bottom, the background/rectangle/... would expand to the correct size?
Hope you can help me, because that could save me hours of work!
NicholasSee "Create a title based on the current title"
http://helpx.adobe.com/premiere-pro/using/creating-editing-titles.html
and then right click on the title on the timeline which is in the proper position, click "copy", right click on the new title(s) on the timeline and click "paste attributes." -
How to create customer specific BEx3.5 workbook using BEx7.00??
Dear guys,
we are faced with the following situation:
Customer uses MS Office2003 and BI-AddOn7.x (Patch 3). We have to provide him workbooks but we use Office 2010 and BI-AddOn7.x (Patch 3). If we now provide the workbook our customer cannot open the workbook.
Trying to save the workbook locally as XLS-file works but to open it on customer side fails.
Although the general workbook setting "use XLS format" was activated there seems to be a check what Office-version was used to create the workbook.
Is there any trick?
Regards,
PeterHi Frederic
yes indeed I tried this option. But w/o any effect. We committed that creation of workbook would better be done in his own environment saving time.
Thanks for your help.
Regards,
Peter -
How to create platform specific Menus
Hi Folks,
I am new to the Air SDK, and having a problem adding menu items. On a Mac platform I would like to add a new menu item
to the existing applications menu. I have tried various example code, but they all produce basically the same error.
I am currently working on OSX Mountain Lion and am using feature detection, which works fine, i.e.
if (NativeWindow.supportsMenu) {
nativeWindow.menu = new air.NativeMenu();
else if (air.NativeApplication.supportsMenu) {
air.NativeApplication.nativeApplication.menu = root;
except that I get the error: ReferenceError: Can't find variable: NativeApplication
Any help would be greatly appreciated.
Thanks,
DarylCheck the uberlink and MacFly tutorials at PVII
http://www.projectseven.com/)
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/)
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp)
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"aekp" <[email protected]> wrote in message
news:en12bl$25c$[email protected]..
>I want to know how to make the drop down menus for my
navigation bar. I
>really
> want the menus to pop out to the right. Do I have to buy
a java script to
> do
> this. I am a relativly new developer. I know some HTML
and am just
> learning
> CSS. I am using Dreamweaver to construct my pages. I
dont know java
> scripting and dont know how hard it is to do so don't
know if this is
> something
> I can make on my own or if I can copy one from a free
source or buy one.
> Thanks for any help. aekp
>
Maybe you are looking for
-
I had booted the system many times., tried option command P R buttons at the same time. No luck. If the Imac is connected to internet by ethernet port, sometimes the screen is just black and blank to which i had to remove internet port after which if
-
How to transfer files from nano to a pc?
how to transfer files from nano to a pc?
-
Microsoft office report package
Hi Guys, Im new to LabeVIEW but a colleague and I are working on an automated monitoring project with our company. We have the Microsoft office report package however I am looking for a few simple examples or tutorials explaining their use. I seen th
-
Added webutil object group with JDAPI - adjust the webutil block sequence ?
Hi all, I'm using the JDAPI to subclass in the webutil object group into Forms in an application. Annoyingly, the webutil block becomes the first block on the Form - which means on some Forms it displays on startup. Is there anyway (programmatically
-
a conundrum for you: My iWeb site works perfectly on Firefox but on Safari, the photo detail pages freeze up completely. I tried re-uploading the relevant pages via FTP but no dice. I reset Safari, ditto.