How to create an invisible tab control

In his excellent book, The LabVIEW Style Book, Peter Blume advocates the use of an "invisible tab control". His front panel, while consisting of a large tab control with several headings that can be clicked, shows absolutely no framing around those headings or around the control as a whole. I have not been able to do it. Except: just now, while clicking around with the color tool, I did it by accident. The entire frame of a "Modern" Tab Control vanished, leaving nothing but the page titles showing! But I don't know what I did, and I cannot do it again. Please, how do you do that?

hi,
in front panel --> press "shift" and right click. and you will get color control.
Then select the last option. that is brush.
right click the object you want to make it invisible. then go to "T" in the top. then press "SPACE BAR" in your keyboard. then you can find the bottom of the pallet. there will be a big " T". Befor that there was 2. now only one. It means fore color ang back ground color. it will make the complete control. invisible.
Check it out...
<<Kudos are welcome>>
ELECTRO SAM
For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.
- John 3:16

Similar Messages

How to create a new tab in CRMD_ORDER for custom fields

Hi Expert,
I have added custom fields in crmd_customer_ i through EEWB .
Now i want to display the fields in a new tab in CRMD_ORDER.
can you please guide me how to create a new Tab step by step procedure.
Thanks & Regards,
Avi

Dear Avi,
please be aware that crmd_order is no longer supported since crm2007 (6.00). That means EEWB is not the right tool to add customer fields because only WEBUI is supported. There you can use the AET tool to create own fields or tables via configuration.
However please see note 1037748 where you get more information and help.
Best regards
Rene

How to create cost element in controlling

how to create cost element in controlling for Direct meterail.
i have to create for each materail or on rm consumption is enough
please give me replay
thanks

Hi Nagaraju,
First you create the required account as cost element through FS00 and select your gl account and edit cost element and give 1 in cost element category.
Afterwards in OKB9 You create the cost element whether it is required for Bus Area mandatory, profit centre mandatory and Valuation area is mandatory. Based on your selection you have to assign 1, 2 or 3. Ex. You have selected for consumption account profit centre is mandatory. You give 3. and you have to assign the cost centre against profit centre. Then automatically your consumption will post to the cost centre.
BSR

How to create ajax based tabs ..??

Hi all,
How to create Ajax based Tabs (or Tab like) in a JSF page..?
Any clues..?
Thanks and regards,
Jijo

You need to write your own jsf component for this.

How to create bdc with table control

hi all.
please some body tell me how to create bdc with table control
or suggest any www with screen shots
thanks in advance ,
aparna

Hi AParna,
Its very Simple.
ALl you have to do is set up a counter based on the number of lines in the tabke. when the counter reaches the number of lines in the table hit the next page button which is at the top of every screen in SAP.
Please refer to the following BDC program I had developed using Table control,
this is for ME01 transaction.
LOOP AT T_EORD_HED.
    SELECT SINGLE * FROM MARA WHERE MATNR = T_EORD_HED-MATNR.
    IF SY-SUBRC = 0.
      PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0200'.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM BDC_FIELD       USING 'EORD-MATNR'
                                    T_EORD_HED-MATNR.       "'58335'.
      PERFORM BDC_FIELD       USING 'EORD-WERKS'
                                    T_EORD_HED-WERKS.       "'0253'.
      L_COUNT = 1.
      LOOP AT T_EORD WHERE MATNR = T_EORD_HED-MATNR
                       AND WERKS = T_EORD_HED-WERKS.
        SELECT SINGLE * FROM LFA1 WHERE LIFNR = T_EORD-LIFNR.
        IF SY-SUBRC = 0.
* Look into the if condition below
          IF L_COUNT = 010.
            L_COUNT = 1.
            PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'EORD-MATNR'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=NS'.
            L_COUNT = L_COUNT + 1.
          ENDIF.
          PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
          PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                        'EORD-AUTET(01)'.
          PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                        '/00'.
          CONCATENATE 'EORD-VDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE SY-DATUM TO T_EORD-VDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-VDATU.
          CONCATENATE 'EORD-BDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE T_EORD-BDATU TO V_BDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_BDATU.
          CONCATENATE 'EORD-LIFNR' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-LIFNR.
          CONCATENATE 'EORD-EKORG' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        '0001'.
          CONCATENATE 'EORD-RESWK' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-RESWK.
          WRITE T_EORD-MEINS TO V_MEINS.
          CONCATENATE 'EORD-MEINS' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_MEINS.
*          CONCATENATE 'EORD-EBELN' '(' L_COUNT ')' INTO OPR_FIELD.
*          PERFORM BDC_FIELD       USING 'OPR_FIELD'
*                                        T_EORD-EBELN.
          CONCATENATE 'EORD-EBELP' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-EBELP.
          IF T_EORD-FLIFN NE SPACE OR T_EORD-FRESW NE SPACE OR
             T_EORD-FEBEL NE SPACE.
            CONCATENATE 'RM06W-FESKZ' '(' L_COUNT ')' INTO OPR1_FIELD.
            PERFORM BDC_FIELD       USING OPR1_FIELD
                                          'X'.
          ENDIF.
          IF T_EORD-NOTKZ <> ''.
            CONCATENATE 'EORD-NOTKZ' '(' L_COUNT ')' INTO OPR_FIELD.
            PERFORM BDC_FIELD       USING OPR_FIELD
                                          'X'.
          ENDIF.
          CONCATENATE 'EORD-AUTET' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-AUTET.
          L_COUNT = L_COUNT + 1.
        ENDIF.
      ENDLOOP.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '=BU'.
      CALL TRANSACTION 'ME01' USING I_BDCDATA
                    MODE UP_MODE
*                     optIONS FROM l_opt
                    MESSAGES INTO I_BDCMSGCOLL.
      PERFORM FORMAT_OUTPUT.
    ENDIF.
ENDLOOP.

How to create Customer data TAB in PO -ME23N

Can anyone tell me how to add 'Customer data' TAB in the PO heade TABSTRIP. I have to add it in the header besides 'Status' TAB.
I know an enhancement 'MM06E005' which is used for this purpose.
Thanks
SMS

Hi
see this sample doc and do it accordingly
by creating a project in CMOD and assigning the Enhancment MM06E005 and writing the code in the respective screen
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Regards
Anji

How to create and use Webservice controls using WSDL in weblogic portal10.3

Hi All,
I have WSDL , How to create webservice controls using the WSDL in weblogic portal 10.3 and use those controls to invoke those webservice methods?
please give me the documents links for this.
Thanks
Venkata Sarvabatla

As far as I remember, Controls can be called only from Pageflows, BackingFiles, Another Control (Like control calling another control) etc. In pageflow we use annotation @Control and give control classname and a varialbe for that. I am pretty sure this annotation may not work from normal java class and in your case a JAVA JSR Class.
If you installed the samples, refer the samples from WLS: C:\beawlp103\wlserver_10.3\samples\server\examples\src\examples\webservices. They have lot of fully ready to work samples with instructions. I used clientgen ant task. But you can use standard SUN JDK Command "wsimport" also to generate the java files from the WSDL. Open any command prompt. If java is in classpath, just run wsimport and that should give an idea.
Goud

How to create an object like "Control Account" in JE? u5982u4F55u7F16u5199u63A7u5236u79D1u76EEu63A7u4EF6

I want to create a user screen like Journal Entry. How could I create an object like "Control Account" in JE?
我想编写一个象u201C日记帐分录u201D那样的屏幕，但是不知道其中u201C控制科目u201D列的控件如何编。请教各位高手。谢谢
Edited by: An Ping Zhang on Sep 15, 2009 4:57 AM

Dear An Ping Zhang,
The "Control Account" column in JE is used ChooseFromList.
You could refer to SDK sample
SDK\Samples\COM UI\VB.NET\17.ChooseFromList.
BTW: you could post your question in Chinese into SAP Business One 中文论坛
/community [original link is broken]
Best Regards
Jane Jing
SAP Business One Forums team

How to create subscreens in tabstrip control using module pool

hai experts,
can u plz give me step by step procedure to create subscreens in tabstrip control using module pool,

hi,
You can check this program
<b> DEMO_DYNPRO_TABSTRIP_LOCAL </b>
This will help you in understanding the concept and how to create subscreens.
Regards
Nishant

How to handle events for Tab Control

Hi,
I have a Tab control with 4 tabs and I would like when I go to a specific tab all the contents of that tab being updated. Could you please help me with this?
How should I set the event structure
Thanks

Tab Control->Value Change is the event you want. You can then use a case structure to do whatever you need it to based on the "New Value".
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

SAPUI5-How to create custom Split Page control

I want to create a custom split -like page control using sap.m library instead of Splitter.This page should contain two areas left and right
content with different width.How to create this type of page as a custom control?
Please help me with this.

Hi,
I think There is no need to create Custom Page for the labels.
To create labels in SAPSCRIPT, you will have to define multiple MAIN WINDOWS in the Page Window.. try the following steps..
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
1. Create a page window and assign it to a page.
2. Choose Edit --> Main windows.
A dialog box appears.
3. Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
4. Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
5. Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
Also Check these links.
how to create labels in sap script?
labels in script
Labels in Scripts
Regards
Shiva Kumar

How to create a new tab inside a existing subtab on a page.

Hi,
How can I create a new tab inside a existing subtab on a page?
If I change directly on the page.xml it will not maintain compatibility with upgrades. Am I right?
Thanks,
Marcelo

Marcelo,
Well basically you are adding a stackLayout bean and using that adding your region. Are you able to see the changes and run the page without any error?
As you are manipulating the file manually, you can never be sure of whether its going to cause issues later on or not. And as mentioned earlier if OAF doesn't support creating the subtab using personalization, there are bound to be some limitations from the framework side. Also what personalization allows is to create items and not regions. So better stick to a rigorous testing to catch any issues early on.
--Shiv

How to create a Dashboard Tab

Hi Experts,
I want to create a DASHBORAD tab ( " Subscriber" ) like " MY Dashboard" is in the mainpage of the Presentaion tab. 2 reports should be under the tab "Subscriber". Please guide how to do this? I am not getting where to do this in Administration settings.
Regards
Jan

Go to
1. Settings / Administration / Manage Interactive Dashboards
Here you create the dashboard
2. In Answers / Manage Catalog
you create the folder
3. on the dashboard / page options / edit dashboard / dashboard properties
you organise the user rights
Turalf

How to create a profile to control the access to Query Designer 2004s

Hi all,
I saw the note Note 962530 - NW04s: How to restrict access to Query
Designer 2004s , where in alternative solution there is the approach on
how to create a database table and modify the function module to control the access.
However, we need to a security profile check that can prevent or allow
who can access 04s tools. Because this is easy to maintain and we don't need to modify the database table time to time.
Please update if it is feasible to have a check within the profile
of the users to acces 04s query desinger. This way we can control
effectively who can access new tools.
Thanks,
Dicky

I can suggest that as this is a Security you might wanna ask the Person who is handling Security in your office.
He can add different Roles which can then control their acess.
For e.g. if you want that your user should be able to run Specific Queries a,b,c,d created by you.
I will suggest interact with SEcurity Personal and ask him to create a Role X.
You can then publish your queries in Role X.
So your users will have acess and security for X and they will then run the queries from them.
Likewise, different other options are also there.
If your queries are on Planning cube then things like giving them acess to Tools should take place similarly in different fashion.
Your user can also use Query desinger and can opne queries from Roles .
Hope this helps.

How can I lock a tab control untill fuction within tab is complete?

Hi
I am a little stumpt. What I would like to do is to lock a Tab control until the fuction within the tab is complete (and have a dialogue box saying something like "fuction 1 must stop before you can run function 2").
I realise some event based programming would have been best but I wonder if there is a quicker fix as the code I produced is quite complex now.
I attach an example (tab control and two case stuctures) to clarify what I need to do.
I know there is probably a really simple answer so sorry to be so dim.
Many thanks
Ash
Attachments:
Example.vi ‏13 KB

I'm still of the opinion that you need to disable the tab control. It's quite hard to give advice without knowing the background. Ok, I know what you want to accomplish, but I don't know how it fits in the rest of your app.
Ha look at the "wizard" template which could be another solution for you.
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
LV_Wizard_Dialog.vit ‏120 KB

How to create an invisible tab control

Similar Messages

Maybe you are looking for