How to create message based exception class?

Hi Guys,
I try to create exception class at Workbech (se24), for example ZCX_TEST. At header information everything is default, but radiobutton "Exception class" is set and checkbox "With message class" is set. After this I enter text for my exceptions, for example TEXT, I assign it to SAP message (for example, class 00, message number 002). I'm going to tabstrip "Attributes" and public constant with name "TEST" should appear with assigned associated type SOTR_CONC and initial value with ID (normal behavior), but attribute "TEST" is created without type and value. It is not possible to use such exception. Where I am wrong?
Regards,
Evgeni

Hmmm. It looks that it works fine with such definitions. Sorry for disturbs.

Similar Messages

How to use user defined exception class

Hi all
I just need som help with creating a user defined exception class.
Im writing a small/simple text editor.
My exception class looks like this:
public class myExcp extends Throwable
     private String message;
     public myExcep(String message)
          this.message = message;
     public void display()
          System.out.println(message);
I would like to use it when a user tries to open a exe-file instead of a txt file.
Here is some code from the editor:
if (e.getSource() == open)
saveOld();
if (fc.showOpenDialog(null)== JFileChooser.APPROVE_OPTION)
readFile(fc.getSelectedFile().getAbsolutePath());
saveas.setEnabled(true);
So, should I use exception here or at the readFile method?
readfile:
private void readFile(String fileName)
try
String tmp = fileName.substring(fileName.length() -4, fileName.length());
if (!tmp.equals(".exe"))
FileReader r = new FileReader(fileName);
textarea.read(r, null);
r.close();
currentFile = fileName;
label.setText(currentFile);
changed = false;
catch (IOException e)
JOptionPane.showMessageDialog (this, "Cannot find the file " + fileName);
Where and how do I use my exception class.
Do I need to create an instance? Where?
Should the exception class extend Exception instead?
Thank you in advance /

Extend Exception, not Throwable. It's a checked exception that way.
Follow the Sun coding standards and make that exception class name start with a capital letter.
When you extend Exception, override all four ctors.
What's that display method you added? Isn't getMessage() good enough?
You need to create a new instance just before you throw the exception, of course.
Sounds like a terrible design, by the way. Exceptions shouldn't be used like "go to" for app logic. They should signal unrecoverable conditions. You can easily recover from the situation you've described simply by displaying a pop-up that tells the user to open only text-readable file types. I think that's a better solution.
%

How to create Formula based value field in COPA

Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh R

The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas

How to create a model access class ???

HI,
Can somebody tell me how to create a Model Access Class. In the Application Set, i can find the Model Access folder, but it has a list of application sets which is already created and the system asks to select a Application set. I need to create a new application set. Please help.
Regards,
Shiny

Hi Shiny,
I would suggest you not to create a new application set.
If you are enhancing a standard PCUI application, i would suggest you to create new model access classes and assign them to the same application set which is assigned with the standard model access class for that application.
Creating a model access class can be done through the transaction SE24(like any other Z-class).
Go to transaction CRMC_BLUEPRINT_C and you could assign this newly created Model access class to the standard application set. This can be done under Application Element->Application Set->MOdel Access Class.
If you still feel the need to create a new application set altogether, it can be done from Trx CRMC_BLUEPRINT_C->Layout of PCUI-> Application Element->Application set.
I hope it helps.
Cheers,
Gyan.

How to create Profile Based Rule in Endeca Studio Developer

Hi,
Can anybody tell me how to create Profile based rule in the Endeca Studio Developer. and how to fecth the data in the JSP. what are the parameter required to pass in the ENEQuery
Thanks
Shailesh

I use visual studio 2012.
I dont see rule set editor which can help me create busineesss rule.
Where can I find it?
Hi Rajesh,
If you want to learn more information about RuleSet Editor in .net framework 4.5, check out https://msdn.microsoft.com/en-us/library/ee960221(v=vs.110).aspx
for more information.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create HeatMap based on Country Credit Rating?

How to create Heatmap based on Country Credit Rating i....
Credit Ratings are AAA, -AAA, +AA, AA, -AA, +A, A, -A, +BBB, BBB, -BBB, +BB....... From Green To Red
Country Credit Rating
Angola
BB-
Botswana
A-
Burkina Faso
B
Ethiopia
B-
Ghana
B
Morocco
BBB-
Nigeria
BB-
Sierra Leone
B-
South Africa
BBB
Tanzania
B
Zambia
B+
Australia
AAA
India
BBB-
Indonesia
BB+
Pakistan
B
Philippines
BBB
Thailand
BBB+
Uzbekistan
BBB
Turkey
BB+
Chile
AA-

Thanks Jim for the solution.
Also, this article should be helpful for you:
Create a Heat Map Using Excel’s Conditional Formatting -
http://peltiertech.com/heat-map-excel-conditional-formatting/
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
the accuracy of this information.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Hi Ethan, If you trying to get points i understand but please do assume that googling is done first.
If you want to get help from others, you should first be polite to those who are trying to help you, rather than "i already new the option of converting to numbers" or "If you trying to get points i understand but please do assume
that googling is done first.".
You didn't make it clear in your initial post that what you already tried, or which articles you already reviewed, how should us people know this?
I'm sorry but here all is asked politely and please, politely do not change the subject.

HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE

HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE.
Requiremenst is as follows.
Year ,Qtr columns in first prompt.Based on selection on these prompts second prompt should display corresponding prompts
Second prompt will have Month ,Week and Day columns.Second prompt should be hidden and based on first prompt selection second prompt should display with constraint based on first prompt.
Any help would be highly appriciated!!!

hi,
Using Guided navigation it is possible,
Please refer the below links.
http://gerardnico.com/wiki/dat/obiee/dashboard_prompt_1_eq_0
http://businessdecisionsystems.com/blog/?p=448
Hope this help's
Thanks,
Satya

How to create ajax based tabs ..??

Hi all,
How to create Ajax based Tabs (or Tab like) in a JSF page..?
Any clues..?
Thanks and regards,
Jijo

You need to write your own jsf component for this.

How to create messages with parameters In ADF model.

In ADF model, How to create messages with parameters?

To Create messages in message bundles with parameters, perform the steps as given below
Scenario: To Create a message as "Department Name XXXXXXX is already existing "
Step#1: For the given entity object “DepartmentEO”, Go to “overview” tab and click “Business Rules” finger tab.
Step#2: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#3: Now go to “Failure Handling” tab, and click the Magnifier Icon.
Step#4: Now in the “Display Value” field, enter the message with flower-braces as below.
Department Name {department_name} is already existing
Step#5: Also modify the Key & Description fields as needed. And click “Save and Select” button.
Step#6: Now go to “Token Message Expressions” section, double-click the Expression field corresponding to "department_name" & give the relevant Attribute names say "DepartmentName"
Step#7: Now click “OK”.

Implementing Note 836401. How to create message class 'Z'?

Hello Experts,
I'm trying to implement SAP Note 836401 -" FBCJ: Receipt print with display not allowed " In SAP ERP 6.0.    Could somebody help me please with action in this note:
"You must then adjust the error class 'Z' to your error class and replace the error number '000' with the error number of the message you created." I have some misunderstanding - What I must to do here? In SE91 i can't find message class 'Z' and I can't to create it there, because of the rule:    name of message class   must minimum 2 characters.
In correction of object :"R3TR REPS MFCJ0F01" of this note, in source code I'm facing strings:
     ID 'BEGRU' FIELD ls_tcj_c_journals-begru.
    CHECK sy-subrc NE 0.
    AUTHORITY-CHECK OBJECT 'F_FBCJ'
      ID 'ACTVT' FIELD '32'                      "Save
      ID 'BEGRU' FIELD ls_tcj_c_journals-begru.
    CHECK sy-subrc NE 0.
    ld_no_auth = 'X'.                            "no authorization
     MESSAGE ID 'Z' TYPE 'I' NUMBER 000.
*   Sie haben keine Berechtigung, Quittungen zu drucken.
ENDIF.                                         "begru initial?
ENDFORM.
How to create the error class'Z'?
How to adjust error class 'Z' to my error class?
Best regards,
Pavel Bogomolov.

Hello Pavel
The SAP note says that you should look for an appropriate Z-message class having a message (i.e. number) with the required text.
Alternatively, you may use the following approach:
    CHECK sy-subrc NE 0.
    ld_no_auth = 'X'.                            "no authorization
     MESSAGE ID '00' TYPE 'I' NUMBER 208 WITH 'Sie haben keine Berechtigung, Quittungen zu drucken'.
"     MESSAGE ID 'Z' TYPE 'I' NUMBER 000.
"*   Sie haben keine Berechtigung, Quittungen zu drucken.
ENDIF.                                         "begru initial?
ENDFORM.
Regards
Uwe

HOW TO CREATE "MESSAGE CLASS"?

HELLO EXPERTS,
 Hereby, I post my another very simple but very important query.
 I have to make "message class". But I do not know the tracsaction code, procedure and other require syntax.
 Kindly, explain me the ENTIRE PROCEDURE.
 Thanks!!

You create and edit Message Class using Transaction SE91. Once you have created a message, you can use it in the MESSAGE statement in a program.
All messages are stored in table T100.
Creating Message Classes
To create a new message class from the ABAP Editor:
 1. In the initial statement (for example, REPORT) or directly in the statement MESSAGE ID <id> enter a parameter value of up to 20 characters as a message ID, for example:
 REPORT <name> MESSAGE-ID <message class>.
 Messages are stored system-wide. The chosen message ID (message class) must not already exist in the system.
 2. Double-click the message ID.
 If you enter an ID that already exists in the system, the system calls up Message maintenance. In this case, enter a different ID. Once you have done this, the system asks you whether you want to create a new message class.
 3. Choose Yes.
 The system calls up Message maintenance.
 4. Enter a brief description of the class in Short text.
 5. Choose Save.

How to create file based on date value

Hi
Hope you'll help me. I can't find right way to tackle the problem. I need to read a file which name is created based on month and years' value. File name format is as follows: INMMYY.log. So to read it I must create File object using this file name format. I tried to use Calendar class get necessary information using get() method. Unfortunatelly returned month's value is always 2,3,4 and so on..(I need 02,03). There is problem with year's value als. It's returned in form YYYY but I need YY.
Does anybody have any idea how to create string INMMYY in the easiest way ??
Thanks in advance :)

Use java.text.SimpleDateFormat.

How to create Form based on a table to display multiple record

Hello All,
Would somebody please tell me how to create a Form based on a single table ,
to view and insert multi record based on a single table.In other words I would like
to have a form as shown below ,where the users can Insert,update,delete,query and so on
Item Id PArt Number List Price
100 Item-1 $120.oo
200 Item-2 $150.00
300 Item-3 $50.00
I know I can do it as Single Record block using Tabular Format,but multiple record ?????
Thanks in Anticipation
Babu

Try this method,
1. Creat a Master Detail Form (Custom Layout and not tabular)
and in the master block select one field.
2. In the HTML layout for master remove the reference for
that field(so that nothing will appear in the master block
of the form).
3. Before the update (in the Pl/SQL event handler select the 'Save' event and write the following code to avoid updating master block).
p_session.set_value(p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'MASTER_ACTION',
p_value => 'None');
doSave;
For eg, let's say
Master is from 'Dept' table and Detail is from 'Emp' table(with join condition Dept.dept_id = Emp.dept_id). In the master remove everything except dept_id field and in the HTML layout for master remove the reference of the dept_id field(you cannot remove this field physically from the master layout). Now the form will look like multirow form rather than master detail form but only problem with this workaround is 'Detail Action' will be present in the detail block.
I hope this will help you.
Thanks
-Krishnamurthy

Newbie - How to create XML based on given schema

Hello,
We have a requirement to create an XML message from our system (Oracle 9iR2 with Oracle Apps 11.5.10). The XML is generated from a query in our HR tables, and must be in a specific format (schema and example XML has been provided to us).
Newbie question is this: What is the best way to create this XML message (dynamic data coming from a SQL select) while ensuring that it matches the given schema? Most of our developers are strong PL/SQL with limited Java experience.
Thanks,
-- John

I've updated the FAQ with an answer and example for this question...
Please see the following thread
How to create XML from relational tables based on an XML Schema ?

How to create message at the end of the process chain

Hi friends,
I have created process chains. It's working fine. But I wanted to create message to give alert if process failure.
My requirement is if any process failure due to any reason message has to receive to the responsible person. I'm not sure how to do this.
Can anybody suggest how to do this if possible step by step.
Thanks & Regards
Siri

Hi,
Genarally, you can create a message, by right click and create message then give email ids in Maintain Recipent list (Recipt type = via internet) and then give message that you want to send in Edit Document.
Check whether the email address is maintained in SU01 in address tab.
Configure SMTP server is set up properly ( SCOT). Ask basis team to do it.
There is also other option to send the mail through program, for this you need to trigger any event or you can insert this program at teh end of the process chain.
*& Report ZTEST_FM_MAIL
REPORT ztest_fm_mail.
DATA : is_doc_chng TYPE sodocchgi1,
it_objtxt TYPE STANDARD TABLE OF solisti1,
is_objtxt TYPE solisti1,
it_objpack TYPE STANDARD TABLE OF sopcklsti1,
is_objpack TYPE sopcklsti1,
it_objbin TYPE STANDARD TABLE OF solisti1,
is_objbin TYPE solisti1,
it_reclist TYPE STANDARD TABLE OF somlreci1,
is_reclist TYPE somlreci1,
w_lines_tx TYPE i.
Create Message Body
Title and Description
*is_doc_chng-obj_name = 'MAIL'.
is_doc_chng-obj_descr = 'Auto genareted Mail'.
main text
is_objtxt-line = 'This is an automatically generated mail. Please do not reply to it.'(028).
APPEND is_objtxt TO it_objtxt.
is_objtxt-line = space.
APPEND is_objtxt TO it_objtxt.
write packing list (main)
DESCRIBE TABLE it_objtxt LINES w_lines_tx.
READ TABLE it_objtxt INTO is_objtxt INDEX w_lines_tx.
is_doc_chng-doc_size = ( w_lines_tx - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num = 0.
is_objpack-body_start = 1.
is_objpack-body_num = w_lines_tx.
is_objpack-doc_type = 'RAW'.
APPEND is_objpack TO it_objpack.
is_reclist-receiver = 'your email id'.
is_reclist-rec_type = 'U'.
APPEND is_reclist TO it_reclist.
CLEAR is_reclist.
*This is for SAP system mail box
*is_reclist-receiver = 'your system login ID'.
*is_reclist-rec_type = 'B'.
*APPEND is_reclist TO it_reclist.
*CLEAR is_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = is_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_objpack
contents_txt = it_objtxt
receivers = it_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks
Reddy
Edited by: Surendra Reddy on Nov 18, 2008 5:36 AM

How to create message based exception class?

Similar Messages

Maybe you are looking for