How to create MSSQLserver source module?

hi, all
My source database is MS SQLServer2000,
how do I create SQLServer2000's source module?
I need particular process ã thank you!

Hi JP ,
Yes. I have already imported the tables into the OWB repository.
Anyway , I can deploy the mapping successfully !!! I checked a topic in this forum which is
Re: For MS Access
Nikolai Rochnik said
"However, when you register a location, the Schema value will be used by OWB to construct a schema.table@db_link in a FROM clause. You want it to be just table@db_link but OWB does allow for empty value in Schema. I will log this as a bug, but an easy workaround would be to use db_link explicitly in the mapping configuration, thus disregarding registered location. Right-click on your map -> Configure -> Source and Targets -> [your source table]. In the Database Link paste the name of the link that was created by OWB in the target schema when the Connector was deployed. It would be something like, depending on your naming, ACCESS_SID@FROM_ACCESS_TO_ORCL.
I have just tried it and it generates, deploys and executes correctly."
I followed his steps and get it work but there is a warning message.
LD-1124: Schema and/or Database link physical configuration parameters should not be set for Table1.
Is it possible to eliminate this warning message ? Anyway , Thanks for your response and help !
Daniel

Similar Messages

Create Data Source Module using OMB

I am not seeing how to create Data Source modules using OMB. I am assuming there is a property of OMBCREATE ORACLE_MODULE that I am overlooking. If anyone can provide assistance, it would be greatly appreciated.
Thanks,
craig

Hi,
Yes, there is a OMBCREATE command for creating Oracle Modules. And as per the Scripting ref Guide ( Page 4-157 owb 9i scripting guide) -
OMBCREATE ORACLE_MODULE 'src_module' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME) VALUES ('this is an Oracle module', 'source module') This will create an Oracle module named "src_module", its description is "this is an Oracle module", and business name is "source module".
HTH
Mahesh

How to change the source module version

Hi All,
In the OWB i created a source module and during those steps i clicked on version 10.1, but during deployment in the deployment managaer when i tried to register the location, its giving me an error as "Source verison 10.1 is not matching with the target version 10.2", can any one please help me or Advice me as to how to change the "source module version"?
Thanks

Hi
what i understood is that the source module is associate with the location and you have provided the 10.1 which you need to change.
so you can change that under location.
Cheers
Nawneet

How to create the funtion module with step by step

friends can u help me regarding how to create the function module very urgent,
regards
bhavani

To create a function module, you first need to create a Function Group which will keep all the function module of same functionality.
To create a Function Group, go to SE80->Click on Workbench-Edit Object->Function Group Tab->Enter Function Group name-> Click Create.
To create a Function Module:
Go to T.Code SE37->Enter the Function name->Enter Function Group name n Short Des.-> Here you need to define Import, Export parameters with the condition. Also you can write your code in source code tab.
check this link
Converting seconds values
check the FM code. if you don't have this FM code, create it in SE37 and make use of it.
FM MONI_TIME_CONVERT
FUNCTION MONI_TIME_CONVERT.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(LD_DURATION) TYPE SY-TABIX
*" EXPORTING
*" REFERENCE(LT_OUTPUT_DURATION) TYPE SWL_PM_CVH-DURATION
DATA: LD_HOUR(4) TYPE N. "
DATA: LD_MIN(4) TYPE N. "
DATA: LD_SEC(4) TYPE N. "
DATA: LD_VALUE2(2) TYPE N.
DATA: LD_VALUE3(3) TYPE N.
DATA: LD_VALUE4(4) TYPE N.
DATA: SAVE_DURATION LIKE SY-TABIX.
data: ld_minus(1).
SAVE_DURATION = LD_DURATION.
if ld_duration < 0.
save_duration = save_duration * ( -1 ).
ld_minus = true.
endif.
CLEAR LT_OUTPUT_DURATION.
IF SAVE_DURATION NE 0.
LD_HOUR = SAVE_DURATION DIV 3600.
save_duration = save_duration - ld_hour * 3600.
LD_MIN = SAVE_DURATION DIV 60.
save_duration = save_duration - ld_min * 60.
LD_SEC = SAVE_DURATION.
IF LD_HOUR LE 100.
LD_VALUE2 = LD_HOUR.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+3(2).
ELSEIF LD_HOUR LE 1000.
LD_VALUE3 = LD_HOUR.
WRITE LD_VALUE3 TO LT_OUTPUT_DURATION+2(3).
ELSE.
LD_VALUE4 = LD_HOUR.
WRITE LD_VALUE4 TO LT_OUTPUT_DURATION(4).
ENDIF.
WRITE ':' TO LT_OUTPUT_DURATION+5.
LD_VALUE2 = LD_MIN.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+6(2).
WRITE ':' TO LT_OUTPUT_DURATION+8.
LD_VALUE2 = LD_SEC.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+9(2).
LT_OUTPUT_DURATION = LT_OUTPUT_DURATION+1.
if ld_minus = true.
write '-' to lt_output_duration+1(1).
endif.
ELSE.
job running or aborted
ENDIF.
ENDFUNCTION.
Eg:2
Use the following procedure to create a function module
1.From the ABAP/4 Development Workbench screen, press the Function Library button on the Application toolbar.
2.Type the name of your function module in the Function Module field. The name must begin with Y_ or Z_.
3.Press the Create button. The Function Module Create: Administration screen is shown
4.Type the name of a function group in the Function Group field. The function group name must be four characters long and must begin with Y or Z.
5.Type an S in the Application field. This field is used to indicate which function area uses the function module. Our functionality is not used by any functional area, it is simply an example, so any choice will do. (S indicates that the function module contains functionality needed by Basis.)
6.Type a description of the function module in the Short Text field. The contents of this field are seen when displaying a list of function modules.
Press the Save button on the Application toolbar.
7.If the function group does not already exist, a pop-up informs you of that fact and asks you if you want to create it. Press the Yes button to create the function group. The Create Function Group dialog box appears. Type a description in the Short Text field and press the Save button. The Create Object Catalog Entry screen appears. Press the Local Object button. You are returned to the Function Module Change: Administration screen.
8.Press the Source Code button on the Application toolbar. The Function Module Edit screen is displayed.
9.Type the source code for your function module. Do not change the system-generated comment lines under any circumstances! Your function module might fail to operate if you do.
10.Press the Save button on the Application toolbar. The message Program xxxxx saved appears in the status bar at the bottom of the window.
11.Press the Back button on the Application toolbar. You are returned to the Function Library Initial screen.
12.If you want to define import or export parameters, select the Import/Export Parameter Interface radio button. Press the Change pushbutton. You are shown the Import/Export Parameters screen (refer to Figure 19.6). Type the names of your parameters in the first column and enter any other desired characteristics for each parameter. When you are finished, press the Save button and then the Back button.
13.Finally, to activate your function module, press the Activate button on the Application toolbar of the Function Library Initial Screen.
http://www.erpgenie.com/abap/bapi/example.htm

How to create a funtion module as i need.

How to create a funtion module, that which should retrive mutiple data with out using data structure.
i.e..using internal table i need to get only some data.
Example:
 1) Using MARC table, i need to get fields only with data (werks, matnr, mmsta, pstat).
i.e importing : werks.
 exporting: werks,
 matnr,
 mmsta,
 pstat.
 2) Also i need coding to get data by without using internal table with the only fields i want.

Hi,
You can only create function modules and function groups using the Function Builder in the ABAP Workbench. For further information, refer to Creating New Function Modules. This section uses an example to illustrate how a function module is created from the point of view of ABAP programming.
Function Groups and Function Modules:
Firstly, we create a new function group DEMO_SPFLI to hold the function module. Then, we can create the new function module.
Parameter Interface:
You can specify the types of interface parameters in function modules in the
same way as the parameter interfaces of subroutines. Since function
modules can be used anywhere in the system, their interfaces can only contain
references to data types that are declared systemwide. These are the elementary
ABAP data types, the systemwide generic types, such as ANY TABLE, and types
defined in the ABAP Dictionary. You cannot use LIKE to refer to data types
declared in the main program.
Exceptions:
Our function module needs an exception that it can trigger if there are no entries
in table SPFLI that meet the selection criterion. The exception NOT_FOUND
serves this function.
Source Code:
Having defined the parameter interface and exceptions, we can now write the
source code of our function module. To do this, choose Source code in the
Function Builder. This opens the ABAP Editor for the include program
L<fgrp>U<xx> (see Function Groups). This is the include that will
hold the program code for the function module;
Data in Function Modules
You can use the TYPES and DATA statements to create local data types and
objects. The interface parameters also behave like local data objects. In
addition, you can access all of the global data of the main program. This data is
defined in the include program L<fgrp>TOP. To open this include, choose Goto
Global data. The global data behaves like the instance attributes of a class.
The first time you call a function module in a particular function group, the data is
loaded into memory. It can then be accessed and changed by all of the function
modules in the group. The system retains the values until the next time a function
module is called.
Calling Subroutines
You use subroutines for local modularization. Function modules can
also use this technique. The function module that they call are defined in the
corresponding main program.
If you only want to call a subroutine from a single function module, it is best to
define them in the same include program as the function module itself, directly
after the ENDFUNCTION statement. These subroutines can be called from all
function modules in the function group, but for clarity, they should only be called
from the function module that precedes them.
If you want to define a subroutine that will be called from several different function
modules, you can define a special include program for it with the name
L<fgrp>F<xx>.
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in
function modules:
RAISE <except>.
and
MESSAGE..... RAISING <except>.
The effect of these statements depends on whether the calling program handles
the exception or not. If the name <except> of the exception or OTHERS occurs
in the EXCEPTIONS addition of the CALL FUNCTION statement, the exception is
handled by the calling program.
If the calling program does not handle the exception
The RAISE statement terminates the program and switches to debugging mode.
The MESSAGE ..... RAISING statement display the specified message. How the
processing continues depends on the message type.
If the calling program handles the exception, both statements return control to the
program. No values are transferred. The MESSAGE ..... RAISING statement
does not display a message. Instead, it fills the system fields SY-MSGID, SYMSGTY,
SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION READ_SPFLI_INTO_TABLE.
""Local interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM SPFLI INTO TABLE ITAB WHERE CARRID = ID.
IF SY-SUBRC NE 0.
MESSAGE E007(AT) RAISING NOT_FOUND.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where
the key field CARRID is equal to the import parameter ID and places the entries
that it finds into the internal table SPFLI_TAB. If it cannot find any entries, the
exception NOT_FOUND is triggered using MESSAGE...RAISING. Otherwise, the
table is passed to the caller as an exporting parameter.
Regards,
Bhaskar

How to create a login module

Hi Everyone.
How to create a login module which like www.sdn.sap.com
the module is on the top left corner

http://help.sap.com/saphelp_nwce10/helpdata/en/46/3ce9402f3f8031e10000000a1550b0/frameset.htm

How to Create the Function Module Exit

Hi,
How to Create the Function Module Exit. Please tell me the step by step procedure.

Hi,
Check this link for how to create the function module exit..
http://sap.niraj.tripod.com/id62.html
Thanks
naren

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

HOW TO CREATE DATA SOURCE FOR MAXDB

hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
Guru

The following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm

How to create Data source in BI7( r/3 extraction)

Hi,
I have created the data source(z_emp_data) at r/3 side and transported in rsa6.
could any one let me know how to create the data source at Bi 7 end? should i create the same data source(z_emp_data) at BI 7 end? i have created the table at r/3 from which i want to load data.....please give step step details..its very urgent....
Thanks
Manjula

Activate it, Create a transformation to the target infoprovider, Create a DTP to schedule the transformation.
You will also have to create an infopackage to get the data from the source system into the BI system.
There are a lot of "stuff" to do with datasources!

How two create UPDATE FUNCTION MODULE

Hi,
I have 2 tables to update one after the other...
I have geard it is advisable to use update function module for this..
can any1 tell me how to create and work with update function modules...
Answers will be rewarded....

Abhay,
How an update function module works is, the execution of the FM is delayed to until when a COMMIT WORK statement is executed.
Hence if you have the data available for updating the two DB tables at the time of calling the FM, you can pass the tables to the same FM and program the DB update for both in the same FM.
However the COMMIT WORK should be outside the FM further down in the calling program.
This link is very good and easy to follow
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/7af4daa79e11d1950f0000e82de14a/frameset.htm
Hope it helps
Aditya[url=http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/7af4daa79e11d1950f0000e82de14a/frameset.htm]
Message was edited by:
Aditya

How to create Jaas Login module !! Urgent

Hi developers
I want to make some changes in logon messages. Right now we are getting only error user authentication failed on the portal even if user is locked or some other reason is there for failed authentiaction. I want proper message should be displaying based on user input. For it I hope its good to create Jaas logon module so that i can modify it accordingly .
kindly if any one can give me way out , its urgent.
how to create it step by step. it would be highly appriciable.
any inputs are appriciated .
Thanks in advance
Abhay

Hi Abhay,
1.) Every question is "urgent"... Please read https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement - section "Use a Good Subject Line"
2.) For JAAS Login Modules examples, see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4d65ed90-0201-0010-3aba-9209836e8242
Hope it helps
Detlev

How to create WebService Source System?

Hi,
I am trying to integrate XI and BI. How do I create a webservice source system? When I create the webservice source system in RSA1, it asks for a logical system name. Do I need to create a RFC destination for this logical system? What other steps should be done here?
Thanks,
Deepthi

Thank you. I am actually referring to step 5 in the below how-to-guide.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
The step 5 says "create webservice source system". But, it does not give details as to what steps should be taken to actually create this. Anyone, used this approach?
Thanks,
Deepthi

How to creat Data source from Multiple Tables in   SAP BI ?

Hi Experts,
1. For Finance & Payments MIS   tables are u2013   BSEG, BSIS,BSAS,PYAR ,BKPF
2. For Inventory tables are           :           MSEG MKPF.
3. For Invoices MIS   tables are -          RBKP & RSEG.
4. For Taxation MIS tables are u2013           J_1IEXCHDR, J_1IEXCDTL, J_1IPART2, J_1IPART1
5. For Master data tables are   -    :         MARA, MAKT, LFA1, J_1IMTCHID
How to creat   individual Datasource for   1.Finance & Payemnt Mis , 2. Inventory, 3. Invoices, 4. Taxation , 5. Mater data. ?

Hi,
Go for the generic data sources.
1. first create the view on all the tables.
        You can only use join conditions but not Union.
        you can specify one table as primary table based on your requirement.
2. build the data source based on the view.
Regards,
Siva
Edited by: sivaramakrishna on Feb 2, 2012 3:54 PM

How to create MSSQLserver source module?

Similar Messages

Maybe you are looking for