How to define a Rights Management process "Protect Document" with an watched folder?

Hello.
I try to build a process in Workbench 11.0, that uses the Protect Document operation of Rights Management.
The process should use a watched folder as start point.
My problem is, how to fill the operations parameters (Input Doc, Document name, Policy set name, Policy name, ...)
Jürgen

First -- by default iTunes stores its Library in "My Documents\My Music\iTunes\iTunes Library.itl", and its Music in "My Documents\My Music\iTunes\iTunes Music\".
Make sure you have a "iTunes Library.itl" after the restore -- if not, and your backup software supports it, try an older version of the file. If your backup software only keeps the last version of the file -- well, then you are SOL, and you will have to re-add the files to the Library. You will also have to rebuild your playlists, ratings, etc.
Since you have "very few files" in the iTunes Music directory -- either you weren't storing your music there, or your backup didn't work. Are you sure you weren't using a non-default location for your music files?
If you had a hardware problem then it is likely that your backup stopped working properly at some point. This is why you need a rotating backup scheme and periodic archiving of files to non-writeable media (If you have the time/money)

Similar Messages

How to connect LiveCycle Rights Management ES4

Hello,
How to connect LiveCycle Rights Management ES4 with Acrobat?
The URL of LiveCycle Rights Management ES4 is [ link removed ]
Best regards

See if this helps you...
http://blogs.msdn.com/b/ecm/archive/2010/02/13/introducing-records-management-in-sharepoint-2010.aspx
http://technet.microsoft.com/en-us/library/cc261982.aspx
http://www.cmswire.com/cms/document-management/the-scoop-sharepoint-2010-records-management-005948.php
"T" | community.zevenseas.com/Blogs/Tanmay/default.aspx

Is it possible to protect documents with 2008 \ 2012 R2 AD RMS on Workgroup Machines \ another domain machines?

Hi Experts,
I have scenario where I have TWO 2008 R2 AD forests with cross forest trust and also I have some workgroup Win7 Machines.
I wanted to deploy AD RMS in any one forest (Say Forest A), as forced by customer
Is it possible that My forest B users can protect documents with AD RMS in Forest (A)
OR
Is it possible that my workgroup computers can protect documents with AD RMS of Forest A? Can I use user credentials from forest A to protect documents on workgroup computer
OR
Lets take a scenario:
I create user in forest A with addition of email address of forest B user
I share this ID to respective forest B user, forest B user logged on to forest B computer
Now can forest B computers can protect documents with AD RMS from forest A by entering forest A user id \ password when RMS prompts for authentication?
Thanks in advance
Thanks Best Regards Mahesh

Can anybody shade some light on this please?
Thanks Best Regards Mahesh

How i do to make backups of any documents with iCloud?

How i do to make backups of any documents with iCloud? in mobile me i can do thay buy with iCloud it its not possible.
in Mobile Me i can do bachups in a destination called Mobile Me disk, in this store backup docoments world, exel, music photos, etc.
how i do this in iCloud? or of another way with apple?

This facility is not provided in iCloud: you will need to find a third-party alternative. This page examines some options:
http://rfwilmut.net/migrate3

How to define the right encoding ???

Hello!
How do I define the encoding for a custom document over generic exchange?
I get a valid file over FTP into the out-queue (ISO-8859-1). I take it and send it to a vendor. Snooping the HTTP stream, I get utf-8 characters, which I send to my vendor - besides in the header encoding = iso-8859-1 and in the out-queue it was ISO-8859-1.
Where is internally the encoding changed? Where/ How can I affect this?
Thanks for help.
Claudia

B2B typically works with UTF-8 encoding. The moment message is retrieved from the queue it is converted to UTF-8. If you have any special requirement, please send me an e-mail.
[email protected]
We will help you.

How to implement Digital Rights Management (DRM) on a document library in share point 2010

Helloo,
Does any one has an idea about DRM (Digital Rights Management) and how to implement it in share point 2010.
I have a requirement to secure some excel and pdf files using DRM in sharepoint 2010. Can anyone help me here..
Thanks
Razi

See if this helps you...
http://blogs.msdn.com/b/ecm/archive/2010/02/13/introducing-records-management-in-sharepoint-2010.aspx
http://technet.microsoft.com/en-us/library/cc261982.aspx
http://www.cmswire.com/cms/document-management/the-scoop-sharepoint-2010-records-management-005948.php
"T" | community.zevenseas.com/Blogs/Tanmay/default.aspx

Livecycle ES3 - Opening and edit rights managed MS office document in SharePoint

As stated in the release note of LiveCycle Rights Management 9.5 Extension for Microsoft Office:
"After opening the protected document: When you open a protected document from SharePoint Server, all permissions on the document are disabled, regardless of the policy that was applied."
Current LC ES2/ ES2.5 does not cater the direct edit of MS office documents in SharePoint.
Is there any news that LC ES3 will resolve this to allow direct edit on the document?
Thanks.

Excellent!
Worked for me.
I am currently using Windows 8.1 Pro and Office365 ProPlus.
I got the same issue as stated by "Aki from Finland" after and decided to follow the steps outlined by "TylorWang". There were a few things I did differently due to the difference in product versions. Instead of going to the \14.0 folders,
I went to the \15.0 folders (both in the registry and under the \AppData folder).
I used PowerShell, running in Admin mode of course, to stop the MYOSYNC
process with:
kill -name msosync
Once I was done with the three steps, I restarted my computer. Once I logged in into my account, the usual Office Upload Center cache error did not occur and my files are now syncing without any problems.
Thank you very much "TylorWang" for your clear and precise solution and thank you TechNet for your continued support!
Taylor.
Edit: I also run Lync 2013 on my system.

VSTO: Word Automation how to Protect Document with Restricted Access

hi all:
As the title, how to achieve this in VSTO?
Could you show some Word API for this requirement?
Really thanks,
Best regards,
Riquel
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Actually I just want to use Automation/VSTO to implement "Restrict permission to content in files". Any idea?
https://support.office.com/en-nz/article/Information-Rights-Management-in-Office-2010-c7a70797-6b1e-493f-acf7-92a39b85e30c?ui=en-US&rs=en-NZ&ad=NZ
Thanks!
Best regards,
Riquel
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Returns Process - Billing Document with reference to delivery

Dear All,
In standard returns process we are creating billing document with reference to sales order.
How can we make the billing dcoument to be created with refernce to delivery as the business wants the invoice document to be created only when the delivery is posted.
Kinldy advise what are the configuration settings required.
With Regards
Mohammed Raees
Edited by: Raeesuddin Mohammed on Aug 30, 2011 7:25 PM

Hi Raees,
Isnt your process flow like this: Sales Order>Delivery>Billing>Return Order>Return Delivery-->Billing?
In general, to ensure that you're creating the invoice always w/ref to a delivery document pls do the following:
1) In VOV8, where you cnofigure your sales doc type remove the order related billing i.e. keep it blank.
2) In VOV8, put the billing doc in delivery relevant doc.
3) In VOV8, in shipping section put the delivery doc type.
4) Create copy controls between the delivery doc type and billing in VTFL at header and item levels.
5) In the item category for this order type+ item cat grp ensure the billing relevance is either B, C or F.
6) Maintain no copy controls between sales order and the billing in VTFA.
I hope this helps.
Regards,
Raghu.

How do I determine the name of a file from a watched folder

I would like to generate a log to track the names and outcomes of files processed from a watched folder. I don't see a way to access the name of the file from within the process. I have a variable "inPDF" which is data type "document" and "outResult" which is type "xml" but I don't see a way to access the file name (or path) of the "inPDF" "document" object. Is there a way to access the file name and path?

Thank you, this sounds promising.
Where can I find documentation describing the attributes that can be retrieved using the getDocumentAttribute function? Also, where can I find a complete reference on the Document object?
Best Regards,
Noam

How to define a report manager ?

Hello Friends,
I'm a newbie to Oracle Apps R12. I have created a user TEST and have assigned responsibilities : General Ledger User, General Ledger Super User, Financial Management, Report Manager, Report Manager Public Reports.
But when i try to run the report 'Chart of Accounts - Account Hierarchy', i get the following error.
Phase : Inactive
Status : No Manager
Request ID : 4348352
Diagnostics : This request will not be processed because there are currently no managers running that can process it. This is an error condition. There are one or more managers defined that can process this request that should be running at this time, but do not appear to be running. Contact your system administrator and/or check the manager log files for errors.
I guess i need to have a report manager. And i read the following somewhere,
" The Report Manager seeded functions need to be assigned manually by the System administrators to appropriate responsibilities based on the types of reports a user submits and publishes in their job. For example, a system administrator might assign the Financial Report Template Editor and Financial Report Submission functions to an existing General Ledger responsibility already used for submitting Financial Reports by General Ledger users."
But my question is how do i add functions to a existing responsibility.
For starters, i need to be able to run an existing report.
Pls guide me.
Thanks,
Amol
Message was edited by:
OraMol

The Standard manager and the Conflict Resolution manager and most of other managers have now started. It was only that the Node value was not defined for these managers. I updated it and they were activated.
Please excuse me as being a beginner, my questions may seem silly.
Now, how do i view a report output after submitting a report request ?
Will the output appear as a link and where? If i can specify it, where do i specify it ?
What Responsibility do i need to assign to the user to be able to view the output?
I am reading the Oracle Report Managers User Guide, its just that i'm not being able to map the theory and practical that accurately (lack of screenshots in the docs). So, a few practical operational tips will surely help me a lot in this regard.
In the documentation its said that "The system administrator assigns Report Manager menu items to various responsibilities. Following are the available menu items:
• Financial Report Submission... etc "
But i could not assign the Financial Report Submission responsibility to my Test user in Sysadmin login. The said Report Manager responsibilities were not available in the LOV.
Thanks.
Message was edited by:
OraMol

How to define a asynchron/synchron Process in ccBPM

Hello,
the scenario:
Outbound:
Channel: JDBC
Message Interface: SOURCE.OA (outbound/asynchron)
Message Interface: SOURCE.AA (abstract/asynchron)
Messagetyp: MT.SOURCE
Inbound:
Channel: Proxy
Message Interface: DEST.IS (inbound/synchron)
Message Interface: DEST.AS (abstract/synchron)
Messagetyp: MT.DEST
Message Mapping: SOURCE_TO_DEST
Interface Mapping: ???
ccBPM:
ReceiveStep_1
Message: SOURCE (container variable linked with abstract interface DEST.AA)
Processstart: YES
Mode: asychron
TransformationStep_2
SendStep_3:
Mode: synchron
synchronous interface: DEST.IS
Request Message: as defined
Response Message: as defined
My Question is:
1. How and where has the Transformation Step to be defined, in order to use the Mapping?
2. What type of Message-Mappings and Interface Mappings do i need, since i cannot directly map an asynchronous message interface to an synchrounous message interface?
Regards
Gunnar

hi,
to implement Asynch-synch bridge using BPM, Plz refer to the below mentioned link:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
[reward if helpful]
regards,
latika.

How to input the right path that i need in miscellaneous files folder

i have this sample code
public class image extends JFrame
private JLabel statusBar = new JLabel();
private JMenuItem menuFileExit = new JMenuItem();
private JMenu menuFile = new JMenu();
private JMenuBar menuBar = new JMenuBar();
private ImageIcon imagedoc = new ImageIcon(button.class.getResource("help.gif"));
private JButton buttondoc = new JButton();
private JPanel jPanel1 = new JPanel();
it works but i used the pictures in the file that is already with the jframe.
i want to add other image, i've already add them on my project but my problem is it is located to another folder. the miscelleanous files folder. if i used the same code, there are errors.
i want to know the right path in how i can use those images in that folder.
thanks in advance
pls reply as soon as possible... i really need this one.

Hello,
I think the way to make your images/icons work in your jclient app,
is to use such a code (test it):
Class c = Class.forName("YourList.YourListWindowFrame");
java.net.URL testt = c.getResource("create.gif");
ImageIcon imageCreate = new ImageIcon(testt);
if ( imageCreate != null)
buttonCreate.setIcon(imageCreate);
But this only works if you copy your icon (create.gif ) into your class directory
YourList/classes/YourList. This is if your output directory in your project Settings
is set to YourList/classes and the package is YourList.
Even if your additional class path is set to YourList/classes and you try to set
your additional class path to YourList/icons, your icons are not found.
It looks like JDeveloper is only looking in your output sub directories.
When you build your application, your gif files are "copied" to your output directory:
YourList/classes.
So, you will have to manually put the icons in your class/packages to make this work.
The idea is that the image files need to be in the same dir as the Java
class file that loads them. Therefore, the best way to do that is to have
an ImageLoader class that is in the same folder as the images one:
public class ImageLoader
public ImageLoader()
public ImageIcon getImageIcon(String name)
return new ImageIcon(getClass().getResource(name + ".gif"));
and would be called like this:
mButtonButton.setIcon(imgl.getImageIcon("JButton"));
http://otn.oracle.com/sample_code/products/jdev/jclient/jclient_binding_demo.html
There you will find a jClient Component Demo that has this code you can use.
(its a pretty cool and extensive demo ... he can look at files ImageLoader.java
and StartFrame.java to see how that particular coding is done.)
Reference:
I don't how much help that can be for you, but here is an interesting Metalink note :
Note 130302.1
"Sample JSP Code: Directory and File Browser Implemented with Custom Tag Library"
Regards,
Steff

How do I associate my Apple Care Protection Plan with my iPod Touch

I just bought a new iPod Touch and an Apple Care Protection Plan. The box indicates 'Auto Enroll' and there is no Applecare Agreement Number anywhere in the box (or on it as far as I can tell). I have tried every number I find on the box in that field when trying to register my AppleCare Agreement online and all of them are rejected. Can someone explain to me how 'Auto Enroll' is supposed to work and how I can register my AppleCare Protection Plan for my new iPod Touch? Thanks!

According to Apple Care, 'Auto Enroll' means that since I bought the iPod Touch and the Protection Plan at the same time at an Apple Store, that they are are already associated and that I didn't have to do anything to tie them together. Sure would have been nice if the Sales person mentioned that at the store so I didn't have to spend so much time trying to figure it out only to find out I didn't need to do anything.

How to attach a word or a pdf document with a workitem.

Hi,
I have a doubt regarding the workflows.
The scenario is when a manager gets a workitem, he has attach a document in the workitem and then approve or reject it.
Actually, before approving or rejecting, the manager has to get email from other approvers who dont have access to SAP or Portal. So, once he gets approval on email then he would take a screen shot of the email and paste in a word document and attach it in the workitem and then approve/reject the workitem. is it possible. This workitem should be visible to the admin people or anybody who checks that workflow instance in the log.
Hope the requirement is clear.
Please suggest whether this is possible and how.

HI,
This is quite possible.
Actually, before approving or rejecting, the manager has to get email from other approvers who dont have access to SAP or Portal.
How these approvers are notified about workitem?
However, you can make use of decision step to approve or reject.
When Manager will open the work item ,SAP standard functionality can be used to attach file , here manager can select word file format and attach the required file. then he can approve or reject it.
This file would be saved as instance of SOFM object and a background method would be required if you want to read the contents.
Regards,
Sangvir Singh

How to define a Rights Management process "Protect Document" with an watched folder?

Similar Messages

Maybe you are looking for