How to delay creation of VideoDisplay

My Flex' app reads an xml with different video-source-url's.
On the same time the VideoDisplay is created. But it does not have
the url for the VideoDisplay source property because parsing is
taking to long.
How can I delay the creation of the VideoDisplay component?

"Flextoth" <[email protected]> wrote in
message
news:glktfo$ipm$[email protected]..
> My Flex' app reads an xml with different
video-source-url's. On the same
> time
> the VideoDisplay is created. But it does not have the
url for the
> VideoDisplay
> source property because parsing is taking to long.
>
> How can I delay the creation of the VideoDisplay
component?
>
Do you actually need to delay its creation, or just delay
setting its source
property?

Similar Messages

How to avoid creation of ^M in linux scripts

Hi All
How to avoid creation of ^M in linux scripts
Regards

If you keep your scripts on linux, there will be no ^M's.
If you use FTP, set transfer type to ASCII. (ascii command)
If you have scripts that show ^M's, you can get rid of them using vi(m) command:
1,$s/ <CTRL>v <CTRL>m //
(where <CTRL>-v means holding the CTRL button and pressing the "v" button, same for "m")
!! Please mind that, whilst it doesn't give any errors most of the time, it can give very strange and unexpected errors in certain cases.
It did give errors on linux+oracle 9 listener (!!!)

How to delay the license days in XI-NW2004s?

I have successfully installed the XI-NW2004s,but only used in 30days.
I think I can adjust time back to setup day to use longer. To my disappointed, there were many j2ee service failed in Visual J2EE administrator.
How to delay the license days in J2EE service ?
Can I install a temp license in Tcode "slicense" just like Minisap developer?
Thx !
points will be award !
best regard!

Hi Raymond,
You need to make sure that the date to which you are changing should be greater then the date of installation. why don't you try this
1.Use <b>SU01</b> transaction to find the date when the user was created.
2. Now change the system date to that particular date or one day greater.
Make sure all the instances of 2004's are down before changing the system date.
once done restart the system.
That should work.....
Regards
Gopi

How to create Creation Profile

Hello all Gurus,
Can someone please tell me how to create "Creation Profile" and use them in MM scheduling agreement? I have an issue, where the user wants 2 separate creation profiles to be created so that the demands should be sent to suppliers on Thursdays and Fridays only. I maintained the creation profiles in SPRO -- MM -- Purchasing -- Scheduling Agreement -- Maintain Creation Profile for Scheduling agreement with rel. doc. But these creation profiles doesn't seems to work. What are the extra steps that we need to carry out once the creation profiles are created and then maintained in MM scheduling agreement?
If you have any knowledge on creation of CREATION PROFILES please share it with me. It will be very much helpful for me.
Thanks and Regards,
Umakanth

hi,
Go to SPRO > MM > Purchasing > Scheduling Agreement > Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
In this step, you can define the release creation profile.
The latter is an instrument for determining which criteria are used to generate releases against a scheduling agreement and transmit them to the vendor.
You assign the creation profile to the scheduling agreement item in the additional data.
The creation profile controls the creation periodicity of the releases and - starting from the current date of release creation - the way in which the quantities are aggregated.
In the release creation profile, you can define
o   General Parameters
-   Which creation strategy is the basis for JIT delivery schedules and scheduling agreements.
-   How backlog and immediate requirements are taken into account during release creation.
o   Aggregation and release horizon
-   If and how schedule lines should be aggregated during release creation.
o   Release creation periodicity
-    With which periodicity scheduling agreement releases are created
o   Tolerance profile
-    That for releases created as a result of changed schedule lines, the system performs a tolerance check
o   Internet release
-    Whether an Internet release is created during release creation

How can delayed delivery update be configured for Inbound delivery ?

Hi All,
How can delayed delivery update be configured for Inbound delivery ?
There is setting for Outbound delivery delayed delivery update but how the same functionality be used for Inbound delivery?
Regards
Jimmi

Hello Jimmi,
Unfortunately I must confirm that the Delayed delivery update is only available for outbound deliveries. Please see below note for further details
664316 Tips for the delayed delivery update for TO
I hope this information helps!
Martin

How to find creation date of a cron job in RHEL 5

We have instances having RHEL 5.10 in our setup. I wanted to know how to find the creation date of a cron job in RHEL 5. I was investigating a cron job, hence the query to know the creation date of a cron job.
I hope my question is clear.
Requesting a reply to my query.
Regards

Sorry to have upset you, but I cannot understand your accusation. Could you please explain where you see aggression in my problem evaluation or where I implied "how dare you"?
I also provided an explanation why the cronfile in /var/spool/cron is not helpful. If I'm wrong, by all means, please let me and anyone else know.
If no filesystem is specified I assume the default file system, which under OL 6 is ext4 and xfs under OL 7. Furthermore I was assuming ext3 due to other questions the OP has been asking in a similar context, which you may have not seen. For example: How to find creation date of a file in RHEL 5

How to delay stream

hi all
is there any suggestion of how to delay streaming between source and destination database
i have site A to stream it in Site B but not immediately , i want to delay it to define date time.

Try changing the codec it might be quicker to encode video using a different format, I'm not a massive fan of wmv tbh.
http://www.linux.org/docs/ldp/howto/Vid … /x988.html
For more information.

How to delay stock confirmation during sales order creation

We have following requirement -
Whenever an order is created, even though stock exists, it should not confirm it right away. We need the delivery date to be current date + 7 days.
This will help us avoid new orders consuming the stock.
For example:
Order 1 created; There was no stock; Hence no confirmation
Order 2 created; There was no stock; Hence no confirmation
Order 3 created; There is stock; At this stage, the order quantity should not be confirmed even though there is stock since there are 2 old orders waiting.
Therefore whenever an order created, delivery date should be in future so that older orders get first preference when stock is available. This is material specific i.e., for some it might be 7 days and for few it might be 10 days.
We either want the delivery date to be a future date or the order quantity should not be confirmed even though there is stock.
We saw that there is lead time in the sales order type customizing, but this will be applicable to all the materials which is not what we want.
Is there any way we can achieve this by just customization and not use user exits.

Hi Kantur Shekar madhuri,
Would you confirm the whether in your schedule line category is activated for "Product Allocation" or not.
if not please activate and re run your scenario.
Regards
Arun

How to delay printing with print-on-release ?

Hello friends,
I have enabled WM transactions, as well as Printing, upon Release of Production Order. My print program takes the WM Transfer Order details and prints it on Pick List. However, about 50% of the time, printing starts before TO creation is complete - so the printout does not contain the TO details.
I need your help to solve the above situation - how can we delay the printing so that TO creation gets sufficient time to complete - or to do something that printing does not starts until TO creation is complete.
- Chetan

Hi,
To my knowledge, In standard SAP, I don't think we can control the timing when you have settings for print-on-release.
But this can be acheived through work around.
In the print program (that you have assigned in OPK8) make changes in the coding by adding conditons as per your requirement and to trigger the print only if your conditions are met. However, this will happen only upon release. Try this with you help from ABAP.

Strategy 82----How to stop creation of New Production Order

Hi All,
My client is facing problem with the material which having Strategy 82- Assembly to Order, As when they make a sales order , w,.r.t that a Production order is made automatically by system,. User complete the production process and deliver this material , now when ever the Sales user change "Credit Block: in that particular sales order again a New production order created to this sales order, How to control his creation of new Production order? As if new production Order create it brakes the link between Sales order and the previous Production order which is already in delivered status.
Your Prompt response will be appreciated.

HI ,
I am closing this thread , as I know how to got a control on trhis, As of behaviour, startegy 82 says every time u change in sales order it will create a new Production order during saving, if the previous order is not been in ONLY REL status. So the only option to control this is in S.O ,change the Item category to "CN" i.e NO MRP when if required there has been any modification to S .O. In std SAP system item catageory has to be congiured , in SPRO SALES we can do the necessary settings.

How to prevent creation of billing docs for Zero Quantities

Hello everyone,
Could someone please help me with this.
We have some invoices created with 'zero' quantities. We need to stop prining invoices for the invoices with zero quantities. Can we stop creating invoice for zero quantities. if yes , please let me know how. Any help is very much appreciated.
many thanks
Edited by: Simsasha on Jan 30, 2009 2:31 AM

Dear Simsasha,
Could you please breif whether:
1. Its Order-related-Billing, OR
2. Delivery-Related Billing
If, Its Order-related-Billing, You need to work-around Copy-Control Setting in VTFA; and if,
Its Delivery Related-Billing, You need to work-around Copy Control settings in VTFL.
You need to write Code to check Quantity = 0, and attach the same within Field: Data VBRK/VBRP; to check and avoid Invoice creation, if Invoice-item has billed quantity as 0.
You may work with Program RV60AFZC USEREXIT_FILL_VBRK_VBRP
Best Regards,
Amit
Note: You may take help from the discussion from following thread:
[Billing with Zero Quantity, not allowed|Re: Billing for zero quantity is being allowed]
I hope, this would definitely help you, some extent.

How to prevent creation of view object rows when using browser refresh butt

HI i have the following problem:
I have a creation form using a partial submition. The problem is that if i have entered some value by using autosubmit , this value will be setted as attribute in the ViewObject . After that if i click refresh button of the browser then the new Row of the view object will be created and i will have a pending row with setted attribute. So if execute commit then the both rows will be tried to commit. How can i prevent this?
Krasi

Hi,
If i've understood you have a invokeAction that create a new row, right? If yes put on condition that it invokeAction won't invoke if is a postback.
Let me know if i miss understand your doubt.
Best Regards

How to automate creation of MS Access databases/tables/records

Can someone point me to some examples that automate the creation of MSAccess database files and tables?
Can I do this with a bat file? If not, a ps1 file?
I bing searched and could not find an example.
I want to test the existence of a mdb (or accdb) file and if it does not exist, create it.
Then I want to see if that mdb (or accdb) file contains a table named "parts".
If it does not contain that table named "parts", create the table.
If that table does not contain any records, than add some sample data, presumably with some SQL "INSERT" statements.
What is the preferred API for this? I was thinking we should use the ADO.NET/OleDB API. I did find a few examples of queries of MSAccess databases with the old ADO API.
ADOX seems very old for creating databases. Is there any thing more modern?
Is powershell the easiest scripting language to do this?
Thanks
Siegfried
siegfried heintze

This blog post should have most (if not all) of what you need:
http://blogs.technet.com/b/heyscriptingguy/archive/2009/02/16/how-can-i-use-windows-powershell-to-create-an-office-access-database.aspx
One thing to watch out for is the db provider for the connection string. The "Jet Engine" has been superseded by
ACE.

How to approve creation of new identities

Hi,
I have created an approval process for the creation of new identities based on the how-to-guide for role approvals.
My idea is to determine all approvers in a script which gets the entry reference as parameter from ToIdentityStore pass.
However, for some reason, the entry reference is empty.
Any ideas what am I doing wrong?
Here is the script:
function nsn_getNSNApproversFromCompanyAddress(Par){
var entryReference = Par;
uErrMsg(1, "entry reference: " + entryReference);
var idStore = uGetIDStore();
var companyAddress = uIS_GetValue(entryReference, idStore, "MXREF_MX_COMPANY_ADDRESS");
uErrMsg(1, "company address: " + companyAddress);
var nsnApprovers = uIS_nGetValues(companyAddress, "MX_APPROVERS");
if (nsnApprovers.indexOf("!ERROR")>= 0)
     uErrMsg(1, "ERROR: " + nsnApprovers);
return nsnApprovers;
uErrMsg(1, "entry reference: " + entryReference) does not print out any value for entry reference
And here is the destination tab content of the ToIdentityStorePass:
MSKEYVALUE     %MSKEYVALUE%
MX_APPROVERS     $FUNCTION.nsn_getNSNApproversFromCompanyAddress(%MX_ENTRY_REFERENCE%)$$
Thanks in advance for your help,
Elmar

Hm, from what the error output message tells me it looks like MX_ENTRY_REFERENCE does not contain ANY value.
uErrMsg(1, "entry reference: " + entryReference); generates this output: 'entry reference: '
May this be due to the fact that this is a creation process and the identity to be created is not yet stored anywhere? If so, what would be the correct way to implement an approval process for identity creation?
In the destination tab, MX_PENDING_VALUE is defined, as in the how-to-guide manager approval example.
Thanks & Br,
Elmar

How to avoid creation of _(file.*), coping from tiger to pc?

how to avoid the creation of this file for ever on a pc environment??
I explain: as i copy any image file, it goes to a spooler directory and that begins instantly to process the file to an OPI server, separating CMYK channels, converting it to high and low resolution...
but as this _(file) is created (same name and extension, but 0Kb and with this _ underscore in the beggining of it name), it begins to process it, and as it really does not exists as an image itself, it crashes the OPI server, forcing us to restart it...
and then, you can imagine the mess, because we're a newspaper, with more than 100 machines logged in two cities simultaneously...
thanks for those who replied last topic I posted about some softwares to delete it! it really worked!!
but now, can anyone have a clue how to DON'T create this file?
thanks in advance!
alex borba
[email protected]

I believe that command is supposed to stop the creation .DS_Store files on servers. Also, I think the plist file gets written to the user ~/Library/Pref, it probably ought to exist both there and in the /Library/Pref folder to really work.
I didn't think the Save for Web option would work for your purposes. I don't believe anything will work except to strip the resource fork off the files before you send them. There is an Applescript that will do it, using a UNIX command in the script. You select a folder, run the Applescript, and it strips the resource fork off all files in the folder and creates a sub-folder called Stripped with resourceless copies of the files in the original:
-- Strip resource fork and metadata in Tiger for one file.
-- If a folder is selected creates an unresourced subfolder of the selected folder
tell application "Finder"
     try
          set aFile to the selection as alias
          set aFolder to the container of aFile
     on error
          display dialog "Select a file"
          return
     end try
     set aFile to the quoted form of POSIX path of aFile
     do shell script "rsync -a " & aFile & " " & aFile & "Stripped; mv " & aFile & "Stripped " & aFile
     update aFolder
end tell
The "do shell script" line must be all a single line in Script Editor. It might wrap funny in the browser. Anyway, copy it, paste into Script Editor, hit compile, and save it as an application. I've only fooled with it a little tiny bit, so I'm not sure whether the rsync process would have any strange effects on complex Photoshop and EPS files or not.
As far as I know the only way to send Mac files without resource forks to a server is to strip them from the files.
Francine

How to delay creation of VideoDisplay

Similar Messages

Maybe you are looking for