How to delegate tasks to specified roles?

Hi all,
I want to know if it's possible to delegate a task to the users which belongs to a specified role.
At the moment, when you click the "Delegate" button, you can actually search for all the users. Is it possible to filter the search result against a specified role. Also limit a delegated task, so that only user belongs to the role can claim the task.
Thanks in advance.

Hi erv2,
The current concept forsees that you could delegate the task to any user in the organization except the ones that are explicitly listed as excluded owners. These users are not allowed to process the task.
Hope that helps,
Martin

Similar Messages

How do I add a feature/role to an offline .vhdx file?

Hello to Anyone that can help with this frustrating task that should be easy,
Ok I looked at Example 3 here:
http://technet.microsoft.com/en-us/library/jj205467.aspx
and tried to use that format to install features and files to a .vhdx file. I tried different syntax but no luck. I don't know what i typed wrong or what i should type? If i wanted to install dns to an offline .vhdx file and that file is in
my c drive, how would i type the syntax? I have tried and failed over and over again. Here are some of the syntax i have tried in powershell:
install-windowsfeature dns -vhdx c:\
install-windowsfeature dns -vhdx c:\VM TEST.vhdx
install-windowsfeature -dns -vhdx c:\
install-windowsfeature -dns -vhdx c:\VM TEST.vhdx
install-windowsfeature -name dns -vhdx c:\
install-windowsfeature -name dns -vhdx c:\VM TEST.vhdx
All these syntax are wrong and am frustrated. btw, the file i want to add dns to is "VM TEST.vhdx"
I have researched and found this video:
http://www.youtube.com/watch?v=r30BxBawNOE
but the guy doesn't give a specific example for me to follow in regards to location of his vhd file and I am using a .vhdx. Again all i would like to learn is how to add features and/or roles to an offline .vhdx file and i am trying with "dns"
since it is so easy to type. What would be the proper syntax? If anyone can chime in that would be great for this seems to be a simple 101 type of question especially for mcsa or mcse certified people out there. I am totally new to this and
can't do this one simple task. Help please.

Hi,
You install a feature/role to a VHD with the -Switch VHD (even if it is a .vhdx you are pointing at...)
See my example below, that installs the DNS server on a vhdx. The switch -IncludeManagementTools do also give you the management Tools for DNS (both Powershell and MMC...)
Add-WindowsFeature -Vhd "C:\SERVER.vhdx" -Name DNS -IncludeManagementTools
MCT | MCSE: Private Cloud/Server, Desktop Infrastructure

How can I know the security role of the logged in user

When you design an enterprise bean or Web component, you should always think about the kinds of users who will access the component. For example, an Account enterprise bean might be accessed by customers, bank tellers, and branch managers. Each of these user categories is called a security role, an abstract logical grouping of users that is defined by the person who assembles the application. When an application is deployed, the deployer will map the roles to security identities in the operational environment.
But wondering when I log into my application with some user name and password (specified in my Oracle database),wondering how this works with the security role I created .How does J2EE know the security role of the logged in user.
Thanks
Manohar

shet wrote:
role at run time.
When I login say as "manju" and password as "money" then how does it know that this user belongs to this security role.Is that the j2ee administrator has to say that user manju has this this security role.Programmitically how does it really work.I am confusedThe j2ee implementation assigns the roles using the JAAS module you have configured for your application on your application server. different JAAS modules get roles in different ways. many allow a single static role to be assigned using a config file. if using a database, often there will be configuration to specify additional database fields which specify the role for a given username.
At runtime, a developer can test roles using methods like EJBContext.isCallerInRole().

Notification Task needs UME role and other value

Hi Experts,
I have a BPM notification task which needs to go to two UME roles (always same) and a UME user (dynamic selection).
This UME user is already stored in my context data.
However, when I configure the "To" tab of the notification task, how do I achive this.
If I select "Choose one or more UME principles" - I can assign the 2 UME roles. But then how do I get that UME user?
Please help.
Thanks,
Rahim.

Hi Rahim,
You want to use an expression and one of the getPrincipal built-in mapping functions.
How are your user id and role names formatted? If you have the full UME name you can use getPrincipal or getPrincipals (for a list of values).
If you only have the name itself then you use getPrincipalByUniqueName - the identityType parameter is 1, 2 or 3 indicating whether its a user, group or role respectively. That only returns a single value ... so if you need to process multiple values then suggest you create a EJB-based mapping function using the UMFactory API to do something similar.
Regards,
Jocelyn

How to move pics from camera role to photo stream?

How to move pics from camera role to photo stream?

before you fiddle with it you may want to back up your photos on your PC. This is how to move them from phone to PC.
How to Transfer photos from HTC memory to PC
1) From the phone: select: Menu>settings>connect to pc>as disk
2) Attach phone to pc with usb cable
3) From pc open: Computer>removable disk F>dcim>100media
Note: you can also pull the mini sd card out of you phone and plug that directly into your computer. just make sure to unmount the disk through your settings options before you remove it from the phone.

How to get the list of roles assigned to a user in all the child systems

how to get the list of roles assigned to a user in all the child systems from CUA SYSTEM

Try transaction SUIM in your CUA system. Go to user, cross-system information, users by roles. If you run it wide open, you'll get all users and all roles assigned for all systems managed in your CUA.
Krysta

How to attach Task List in Notification

Hi all
How to attach Task List in Notification?
Thanks.

List item is forms is generally used when you have pre-defined set of values. you can define them property of list item.
It seems you have dynamic list of values to be displayed on your form, instead go for a text item with a LOV. You can define your logic to get list of values in record group.
Thanks
Rishi

How to trigger tasks which created during Event was inactive in WORKFLOW

Hello Experts
We have a custom application with L+1 approval required for approval using workflow.
There was a publish for a nomination for team , Team has logged in registered for the published training.
Unfortunately, all my team mebers 5 of 7 were already applied for nomination.
The team was waiting for my approval, Finally we discovered - The tasks got deactivated;
We discovered that The Triggering Events that are deactivated
Txn --> PFTC_DIS
...............Task Type : Selected ( Workflow Template)
...............Task : 9N000NNN
...............Click : Display
...............Click : TAB : Triggering Events
..........................Found here ...The Tasks are deactivated ....................
To activate "deactivated Events
Txn --> SE37
.................Function Module : SWE_EVENT_REC_TYPE_ENABLE
................Hit : Execute
Filled in Screen   ; CLINET : NNN
                               OBHTYPE : ABCD ( What i have seen in Triggering Events Tab)
                               RECTYPE : WS9N000NNN
                               EVENT : EVENTNAME ( What i have seen in Triggering Events Tab)
................Hit : Execute
Once i do & if i check again in PFTC_DIS it is showing green & Event got activated
after event is active
The other 2 Members later raised & had come approval.
...as it is custom application we are storing who registered for it.
Now I see the other 5 members entries in my table
How can create Tasks to flow these workflow task for my approval which were created during event was inactive
may slightly confusing, I am also early bird on WORKFLOW.
if any one give a clue will be greatful
Rgds
PR

Hello Srinivas !
         You've stated as follows :
How can create Tasks to flow these workflow task for my approval which were created during event was inactive.
Hope you wanted to state that users have registered nomination when the event was inactive( and thus workflow didn't get triggered) and now you want those nominations should be routed via workflow.
The solution is to use SWUE transaction and re-create the event.In doing so, please be noted that the time at when nomination was registered(when the event was inactive) and time at when workflow triggered from SWUE would be too different.So, discuss with your team before doing so.
Regards,
S.Suresh.

How to delegate the work flow process.

hi
i was wondering if someone has taken a leave and he is replaced by an employee x,the work flow approval should be directly move to the employee x.
but its not the case.as when someone is one leave,the workflow does not go to his replacement to approve
Is there a way how to delegate the workflow process?"
Thank you

Hi,
By identify the replacement in leave process, workflow process doesn't route to that person. I guess that replacement field is just for data capturing only. The approver should use delegate functionality available on notification responsibility to identify which process route to which person in a given time period.
Thanks

How many DAQ tasks per loop?

Hi to everybody, I hope anybody can help me with the next case:
I am working on a system in which I have to read signals of 5 different sensors which have different ways to communicate (4 - 20 mA, voltage, RS-232, ModBUS, etc.) with the DAQ Device (cDAQ in my case), at same time when I am reading the variables I must check for the state of several digital inputs to verify connections and if any is interrupt I must stop the Data Acquisition.
My question is if is recommendable to put all the tasks in a single loop with the logic shown in the attached image.
Or if I should divide the tasks in a multiple loop architecture.
If the answer is the second, my next question is: How many DAQ tasks per loop is OK?, my doubt is based on the number of variables that I am going to read
and the different ways to get the measures, specially which are by protocols (ModBUS, RS-232), all this by the response time.
Thanks in advance, all suggestions are welcome!

I would recommend using a loop just for control and UI events. It should only have an event structure. Don't use the timeout case, since that just turns the system into a polling. Use Queues to send data from the controller loop to your other loops and User Events to send data back to the controller looop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Why do we need to specify Role baseprovider and membership provider in Central Admin and security config files?

Hi,
why do we need to specify role base provider and membership provider files in central admin and securiy config files.
thanks,
gaurav

We use 3 settings in Forms based auth:
1 Membership = This contains Users and groups information. (This table also has username and password)
2 ConnectionString = Connetion details to connect to database is stored here(servername, databasename, username, password, port )
3 Role = This table contains all the Roles (Admin, contibutor, etc of the data source)

How to assign task to others with an attachment?

Hi All,
How to assign task to other with an attachment and field values in the actual InfoPath form?
In detail, If a InfoPath form has submitted then task should be assigned to a person with an attachment and some field values which are present in InfoPath form.
How to achieve this scenario?
Thanks in advance!

What you describe is a simple approval workflow. SharePoint comes with approval workflows out of the box.
When a task is created to approve an item, it does not need to have the attachment that is already in the item. The task will contain a link to the item that needs to be approved, so there is no need to duplicate the file attachment.
You may want to read a bit more about the out of the box approval workflows in SharePoint. Start here:
Understand approval workflows in SharePoint 2010
cheers, teylyn

How do I see the users/roles which have quota access to a Tablespace?

How do I see the users/roles which have quota access to a Tablespace?
Thanks

Thank you very much.
select username from dba_ts_quotas where tablespace_name='&tablespacename';
did the job!
regards

How to allow only the specified users/groups to open my pdf files...

Hi there,
I'm looking for resources/documents describing how to allow only the specified users/groups to open my pdf files by the Java API...
I've found a sample code creating a policy in the following document.
http://livedocs.adobe.com/livecycle/es/sdkHelp/programmer/sdkHelp/wwhelp/wwhimpl/js/html/w whelp.htm?context=sdkHelp&topic=learn_lc_sdk_invokeremoting
( API Quick Starts (Code Examples) > Rights Management Service API Quick Starts > Quick Start: Creating a new policy using the Java API )
But the sample code doesn't set recepients( users/groups ) who can open the pdf file.
How can I make it ?
Any samples ? or Does anybody can tell me which Java classes/methods I should use ??
Policy#addPolicyEntry(PolicyEntry policyEntry) ??
PolicyEntry#setPrincipal(Principal principal) ??
or none of them ?
Any hints are appreciated !
Thanks.

I'm not exactly sure what you are tying to do here, but typical approach when issuing one PDF par user/groups scenario goes like:
1. Create policy for specific purpose and add principal (user/group)
2. Apply policy on server side
3. Deliver the file (via email etc...)
If you are looking for sample codes, try quick start.
http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?&accessible=true
If you go "API Quick Start/Rights Management Service API Quick Starts", you might find something useful. I think you need "Creating Policies" or "Modifying Policies" for step 1 above, and "Applying Policies to PDF Documents" for step 2.
Hope this helps.

How to check granted privileges on role.

Hi,
Can any one explain how to check granted privileges on role.
I have created one role called ALL_SYSPRIVS
but I forgot what privileges granted to this role
Thank you...

Hi Vijay,
Last week i saw the following thread:
Finding the privileges assigned to a user
Re: Finding the privileges assigned to a user
From there, you'll be able to find a few scripts that will provide you with an overview of grants assigned to user, or role....
HTH,
Thierry

How to delegate tasks to specified roles?

Similar Messages

Maybe you are looking for