How to determine T440s Synaptics Trackpad Firmware version

How do I determine the current firmware version of my touchpad?  The readme file for the firmware update does not say how to determine what version is already installed. 
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/grgy03ww.txt
.NET Software Developer
ThinkPad T440s (20AQ005TUS) | ThinkPad ThinkPad T430 (2342CTO) | Lenovo H430 (25582AU) | ThinkPad X230 (2306CTO)

I ended up soldering leads on the main board and captured the boot log. I managed to find only one other boot log to compare to (here) but comapring the two hasn't given me much insight. On the surface it seems like my issue is that the AHCI SATA loader is trying and failing to get port 0 to respond. I've posted the full boot log here, but I'll post the last bit here in hopes that someone can point me in the right direction. Thanks. Hit any key to stop autoboot: 0
init_sata:
serdes: 24Mhz ref clk
Serdes 1 : CMU OK
Serdes 1 : Lane OK
Serdes 2 : CMU OK
Serdes 2 : Lane OK
cap 0x6f26ff81 port_map 0x3 n_ports 2
P#SERR 0x4050002
IS 0x0
Port 0 control: 0x300
Port 0 status: 0x123
P#SERR 0x0
IS 0x1
Port 1 control: 0x300
Port 1 status: 0x0
GHC 0x80000000
GHC 0x80000002
ahci_init_one: SUCCESS
SATA Controller Info:
AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part
Enter start port: 0
Port 0 status: 123
cmd_slot = 0xb06000
Device not ready. BSY, DRQ or ERR in TFD!
Can not start port 0
timeout exit!
sataenv: GPT header not found
timeout exit!
sataenv: partition 7 not an environment
timeout exit!
sataenv: GPT header not found
timeout exit!
sataenv: partition 8 not an environment
timeout exit!
GPT header not found
Bad Magic Number
arg1 char: s
Barebox-C2K >/ 

Similar Messages

  • How do I find out the firmware version of my WD Black2?

    Dumb question, maybe. How can I find out what firmware version I'm currently on? Need to know this to figure out if I need to update. Thanks

    Oops, my mistake, that's the device driver in the OS. I should never post before my second cup of tea. Download and install WDC Lifeguard. Start it, right-mouse click on the drive in question, select Properties, and the firmware version will magically appear. http://support.wdc.com/product/download.asp?level1=6&lang=en

  • Lenovo Yoga - Issue Synaptics Trackpad Firmware Update (12/15/2014)

    Anyone have luck installing this trackpad firmware update? 
    It was posted today 12/15/2014:
    http://support.lenovo.com/il/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-...
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/gqgw01ww.txt
    I am seing the following error while trying to install:
    Problem signature:
      Problem Event Name: BEX
      Application Name: SynReflash.exe
      Application Version: 18.1.27.3
      Application Timestamp: 54089b3f
      Fault Module Name: SynReflash.exe
      Fault Module Version: 18.1.27.3
      Fault Module Timestamp: 54089b3f
      Exception Offset: 00045554
      Exception Code: c0000409
      Exception Data: 00000002
      OS Version: 6.3.9600.2.0.0.256.4
      Locale ID: 1033
      Additional Information 1: 3e3a
      Additional Information 2: 3e3a140e9dbdcd8b1ea2a2ea4f70ce20
      Additional Information 3: c767
      Additional Information 4: c76757f983dcfa65b0adf39c13a9aeaa
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=280262
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    thinkpadfreak wrote:
    Just an update. I formatted my laptop, and the same problem persists. So we can rule out software problems.
    Good to hear! I removed and re-installed synaptics drivers, but this doesn't help. You can't install that firmware update without drivers being installed on your system. Someone could try installing older synaptics drivers and then the firmware update. I don't have energy to do that.
    This really sucks.

  • How to determine the Plunin Bundle Patch version applied

    Working to apply the EM DB Plugin Bundle Patch 12.1.0.5.8 (Agent Monitoring).  The current Plug-in Version is 12.1.0.5.0.  How can I check or determine that the 12.1.0.5.8 Plugin Bundle Patch has been applied to a given Agent?  Bundle Patches are being released maybe every 30-days.  Would like to be able to view the Plugin Bundle patch level for a given Agent to the 5th number, "8" in this case 12.1.0.5."8" .

    From EM, go to the Agent target, on the bottom left hand side, you'll see a Configuration section, click on the Oracle Home and Patch Details link...
    This will bring up the Oracle Home for the agent, and in the middle-right section there is a TAB for Patches Applied. This will list the Patch # and the Description, which has the 5th digit...
    If you're on the agent, each plugin has it's own ORACLE_HOME.  You can find them by looking at the inventory, or run opatch from the agent...
    if agent is installed in /oracle/agent, you will have a plugins directory:
    drwxr-xr-x  8 cllamas dba 4096 Feb  4 15:03 oracle.mysql.omys.discovery.plugin_12.1.0.1.0
    drwxr-xr-x  6 cllamas dba 4096 Feb  4 15:03 oracle.sysman.db.discovery.plugin_12.1.0.7.0
    drwxr-xr-x  8 cllamas dba 4096 Feb  4 15:03 oracle.sysman.emas.discovery.plugin_12.1.0.7.0
    drwxr-xr-x 11 cllamas dba 4096 Feb  4 15:09 oracle.sysman.oh.agent.plugin_12.1.0.4.0
    drwxr-xr-x  6 cllamas dba 4096 Feb  4 15:03 oracle.sysman.oh.discovery.plugin_12.1.0.4.0
    drwxr-xr-x  7 cllamas dba 4096 Feb  4 15:03 oracle.sysman.vi.discovery.plugin_12.1.0.1.0
    drwxr-xr-x  6 cllamas dba 4096 Feb  4 15:03 oracle.sysman.xa.discovery.plugin_12.1.0.6.0
    You can run opatch lsinventory -oh /oracle/agent/plugins/oracle.sysman.oh.agent.plugin_12.1.0.4.0
    to get the version and patches applied.   I've already upgraded to DB Plugin 12.1.0.7 so i don't have an example to show at command line, but it will also list out the patch # and description which will have the 5th digit.

  • How to determine the Oracle Application server version in 11i?

    Hi Hussein:
    I just applied the CPU April 2009 for my database and I am trying to patch the Oracle application Server. I found out the Apache version
    Server version: Oracle HTTP Server Powered by Apache/1.3.19 (Unix)
    Server built: Aug 7 2003 19:01:25 (iAS 1.0.2.2.2 rollup 4)
    But I am not sure how to map the apache Version to Application Server version. With out this information I cant Locate the patch.
    I would appreciate your help.
    Regards,
    Bala

    To find Apps Version (11i/R12/12i)
    Connect to database as user apps
    SQL> select release_name from apps.fnd_product_groups;
    Web Server/Apache or Application Server in Apps 11i/R12
    Log in as Application user go to IAS_ORACLE_HOME/Apache/Apache/bin/ and run httpd -version

  • Anyone know how to revert APTV to previous firmware version

    Having all sorts of homesharing issues since I updated to latest APTV firmeware update, Need to revert to old one and get my APTV working again..
    Home sharing currently disconnecting automatically every 4 minutes.. 
    If anyone can help that would be great - thank you

    Having all sorts of homesharing issues since I updated to latest APTV firmeware update, Need to revert to old one and get my APTV working again..
    Home sharing currently disconnecting automatically every 4 minutes.. 
    If anyone can help that would be great - thank you

  • How to Determine the Oracle Identity Manager Server Version?

    Friends,
    I have two questions about the Identity Manager...?
    How to Determine the OIM 11g Server Version?
    How to Determine the OIM 9 Server Version?
    Thanks

    The bundle patches are found by build number. If you go to metalink and check the bundle patches, there is a build number associated with them, usually also contained in the xellerate/config/Version.props file. This is written to the XSD table during patching. Once installed, there is no identifier that says "BPXXX applied".
    -Kevin

  • How to revert to old firmware version

    how can i revert to old firmware version for 2700 classic. i.e from v7.80 back to v 7.15.thanks

    MY MOBILE NOKIA 2700 CLASSIC... BEST MOBILE
    my problem is very severe mate...
    1st problem) i got low phone memory peoblem...
    then i given to customer care ...he  doesn't solved & arises some more problems.
    he told me
    i just updated ur software version 7 to 9.95(2-04-10)
    but i got....
    2 problem)restarting my mobile when some body callme or lift the call
    3rd problem) when iam connected to net through mobile only it completely downloads application finally it  displays "invalid application".
    before update same application snaptu.jar file fully worked for me
    at present invalid application.
    wats the problem any body solves this ......????
    i got problem in   NOKIA PRIORTY .i ...who will be rectify this problem ????
    i din't understanding.....!!!!!
    ANY BODY PLZ HELP ME....!

  • How do you determine the firmware version for a laptop docking station?

    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin

    atenpo wrote:
    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin
    WA995AA#ABA shows to be a hard drive, not a docking station

  • How do I determine current firmware version for WRT54G

    I've been poking around the site a bit, and note that there are mandatory upgrades to various firmware versions. I'd like to upgrade if necessary, but have no idea how to determine what firmware version I have right now.Message Edited by shelmart on 12-17-200605:36 AM

    What is the excact hardware version # of your router? U can find that underneath the router itself, there's a sticker there & its just right below the Linksys Logo. If its version 5 or 6, u can go to this website: www.linksys.com/connect . Download  & save Easylink Firmware Tool & then before u run that file after saving, disable first all your internet security like firewalls & anti- virus coz it will block the connection of this software from running properly. That EFL will automatically upgrade the firmware of your router.

  • How to determine firmware version of brick?

    Is it possible to determine the firmware version that the logic board has installed? I might be wrong about how the firmware operates, but the word 'firmware' to me usually implies flashing the BIOS. I know what version of 'firmware' the OS portion of the HDD has installed, but I'm not sure that it matches the BIOS and I'm still hoping I can revive the unit without repartitioning, etc. Background - I made the boneheaded mistake of trying to run sudo apt-get install -f <whatever> and was left with an SSH session where only bash built-ins would even run. No `ls`, no `cat`, no `sudo`. I tried to revive the system as best I could while the SSH session was still open using the errors reported and using this guide to abuse shell built-ins to recover a system in this state. But I ran out of time and had to close the connection (on a laptop). After this the system would power up but stay at white light LED indefinitely. So I popped the HDD into a spare linux machine and confirmed the drive looks fine - all data there and the OS RAID partitions were easily browsable. So I reimaged the OS RAID partition with rootfs.img from several different firmware versions (I really don't know whch one I was running as I've updated a few times but not sure when last), but still no luck. Am I wrong in assuming there's a BIOS update as well when we talk about 'firmware'? Am I missing some steps after reimaging the OS partition? Any help would be very appreciated.

    I ended up soldering leads on the main board and captured the boot log. I managed to find only one other boot log to compare to (here) but comapring the two hasn't given me much insight. On the surface it seems like my issue is that the AHCI SATA loader is trying and failing to get port 0 to respond. I've posted the full boot log here, but I'll post the last bit here in hopes that someone can point me in the right direction. Thanks. Hit any key to stop autoboot: 0
    init_sata:
    serdes: 24Mhz ref clk
    Serdes 1 : CMU OK
    Serdes 1 : Lane OK
    Serdes 2 : CMU OK
    Serdes 2 : Lane OK
    cap 0x6f26ff81 port_map 0x3 n_ports 2
    P#SERR 0x4050002
    IS 0x0
    Port 0 control: 0x300
    Port 0 status: 0x123
    P#SERR 0x0
    IS 0x1
    Port 1 control: 0x300
    Port 1 status: 0x0
    GHC 0x80000000
    GHC 0x80000002
    ahci_init_one: SUCCESS
    SATA Controller Info:
    AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    flags: ncq stag pm led clo only pmp pio slum part
    Enter start port: 0
    Port 0 status: 123
    cmd_slot = 0xb06000
    Device not ready. BSY, DRQ or ERR in TFD!
    Can not start port 0
    timeout exit!
    sataenv: GPT header not found
    timeout exit!
    sataenv: partition 7 not an environment
    timeout exit!
    sataenv: GPT header not found
    timeout exit!
    sataenv: partition 8 not an environment
    timeout exit!
    GPT header not found
    Bad Magic Number
    arg1 char: s
    Barebox-C2K >/ 

  • How to I determine the firmware version on my hp prime?

    Friends
    How to I determine the firmware version on my hp prime?
    Thanks
    Migs

    The easiest way is: Home, Help, Tree, up-cursor, Enter.
    Note: I don't work for HP.  I'm just another happy HP customer.
    -Joe-

  • ARBS: how do I determine firmware version?

    I have an AEBS with software version 5.6. How do I identify what firmware it is using? I am curious as to whether it is up to date and also curious as to what the most current firmware version is.

    5.6 is the most recent firmware version - it was supplied with the Airport 4.2 update.
    The firmware version your Base Station is running is reported by the Airport Admin Utility. From the View menu select Summary.

  • How to determine GPIB-ENET firmware version?

    I have several of the older GPIB-ENET units. I see the latest firmware binary on the FTP site is A5. I'm pretty sure our units have olders revs since they were installed several years ago. However the manual says to only update the firmware when necessary since there are a limited number of times the firmware can be updated.
    My question: Is there a way to determine the device firmware version so I'm positive I need to update?
    I notice the new EthernetConfig utility for GPIB-ENET/100 devices shows the firmware revision when you select the device. Can this utility also "see" older GPIB-ENET devices and show the firmware revision for these older devices as well?

    Hi,
    Could you email in to the technical support deparment? You can go to www.ni.com/ask. We'll try some alternatives.
    DiegoF
    National Instruments.

  • How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

    The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
    I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4).  Everytime I open the airport utility I get the following message: "
    This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
    I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
    One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
    I'm getting the exact same message on my other computer, a Mac Air.
    So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
    Thanks!

    See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Maybe you are looking for