How to determine weblogic health status column when it is in NOT OK via wlst?

Dear Legends,
Is there a command to determine weblogic managed or admin servers HEALTH COLUMN Status? Because some times in STATE Column it would be RUNNING and in HEALTH Column it would be in "NOT OK" or the OK will not be visible.
Thanks,
Karthik

Just in case others have the same question, I have determined that the CLI tools can be used to query the file services without any apparent detrimental effects while using our leopard server 10.5.3 in a workgroup configuration. Hence the names of AFP users can be determined from the command line by:
sudo serveradmin command afp:command = getConnectedUsers | grep name
and the smb users can be found with:
sudo serveradmin command smb:command = getConnectedUsers | grep name
Hope that helps
-csl

Similar Messages

How to stop the prodution order creating when the product is not valued?

Hi guyes:
How to stop the prodution order creating when the product is not valued using CO01?
I hope that when i create the production order,the system will check the product is valued or not,if not
the system will show an error or warning message!
How to config for this?
Thank you!

Dear Zhao Gang,
Check with this user Exits mentioned in this link,
Prevent Production Order from "Release" if there is no Cost Estimate
Re: User Exit at Production Order Release
Check and revert back.
Regards
Mangalraj.S

Weblogic Health status goes to "Warning"

Hello All,
I am working in a company in which we receive thousands of requests per day, when there are peek times, some of our weblogic servers reports the health status as "warning", we are using clustering and load balancing, i have searched for possible solutions on the internet but they all indicates the tuning of weblogic e.g increasing the time interval, stuck thread count etc etc.....
is there any solid solution available to this problem, means which could really solve this, i tried many of these but unable to solve the problem, every day to solve the problem i have to bounce back "restart the weblogic instance", so please help me in this problem so that i do not have to restart my weblogic server instance again and again.
your help is highly appreciated.
P.s: we are using weblogic 10.3.5
Regards.
Mansoor.

Hi,
Some of the information which i can access is given below (this task is assigned to me but i am not weblogic admin)
- we are using jrocket.
-weblogic is 32 bit.
A snapshot of server log is given below
[memory ][Mon Nov 26 14:46:12 2012][07144] Running with 32 bit heap and compressed references.
[memory ][Mon Nov 26 14:46:12 2012][07144] GC mode: Static, strategy: Generational Concurrent Mark & Sweep
[memory ][Mon Nov 26 14:46:12 2012][07144] heap size: 1536000K, maximal heap size: 1536000K, nursery size: 384000K
[memory ][Mon Nov 26 14:46:12 2012][07144] <s>-<end>: GC <before>K-><after>K (<heap>K), <pause> ms
[memory ][Mon Nov 26 14:46:12 2012][07144] <s/start> - start time of collection (seconds since jvm start)
[memory ][Mon Nov 26 14:46:12 2012][07144] <end> - end time of collection (seconds since jvm start)
[memory ][Mon Nov 26 14:46:12 2012][07144] <before> - memory used by objects before collection (KB)
[memory ][Mon Nov 26 14:46:12 2012][07144] <after> - memory used by objects after collection (KB)
[memory ][Mon Nov 26 14:46:12 2012][07144] <heap> - size of heap after collection (KB)
[memory ][Mon Nov 26 14:46:12 2012][07144] <pause> - total sum of pauses during collection (milliseconds)
[memory ][Mon Nov 26 14:46:12 2012][07144] run with -Xverbose:gcpause to see individual pauses
[JRockit] Management server started on port 57032, ssl=false, authenticate=false.
[memory ][Mon Nov 26 14:46:19 2012][07144] 6.891: parallel nursery GC 432860K->161756K (1536000K), 56.218 ms
[memory ][Mon Nov 26 14:47:14 2012][07144] 62.086: parallel nursery GC 480873K->201412K (1536000K), 35.692 ms
[memory ][Wed Nov 28 07:51:50 2012][07144] 147933.627-147938.089: GC 1281600K->1276830K (1536000K), sum of pauses 557.423 ms
[memory ][Wed Nov 28 07:51:55 2012][07144] 147938.168-147942.452: GC 1280000K->1276826K (1536000K), sum of pauses 41.780 ms
[memory ][Wed Nov 28 07:52:07 2012][07144] 147942.533-147954.871: GC 1286400K->1276836K (1536000K), sum of pauses 8197.144 ms
[memory ][Wed Nov 28 07:52:07 2012][07144] Throwing OutOfMemory: allocLargeObjectOrArray - Object size: 16777232, Num elements: 4194304
[memory ][Wed Nov 28 07:52:10 2012][07144] 147954.956-147957.579: GC 1283200K->757041K (1536000K), sum of pauses 340.881 ms
[memory ][Wed Nov 28 07:52:12 2012][07144] Changing GC strategy to Generational Concurrent Mark & Sweep
[memory ][Wed Nov 28 07:52:13 2012][07144] 147957.659-147960.479: GC 760241K->861430K (1536000K), sum of pauses 488.982 ms
[memory ][Wed Nov 28 07:52:16 2012][07144] 147960.566-147963.376: GC 863268K->761200K (1536000K), sum of pauses 366.075 ms
[memory ][Wed Nov 28 07:53:09 2012][07144] 148013.685-148016.781: GC 813168K->920501K (1536000K), sum of pauses 773.052 ms
[memory ][Wed Nov 28 08:06:33 2012][07144] 148820.343: parallel nursery GC 1168533K->1018744K (1536000K), 893.296 ms
[memory ][Wed Nov 28 08:06:34 2012][07144] 148821.616: parallel nursery GC 1377488K->1201126K (1536000K), 503.901 ms
[memory ][Wed Nov 28 08:06:35 2012][07144] 148822.326: parallel nursery GC 1489509K->1536000K (1536000K), 408.912 ms
[memory ][Wed Nov 28 08:06:38 2012][07144] Changing GC strategy to Generational Concurrent Mark, Parallel Sweep
[memory ][Wed Nov 28 08:06:39 2012][07144] 148821.258-148826.868: GC 1052344K->1281600K (1536000K), sum of pauses 1236.701 ms
[memory ][Wed Nov 28 08:06:44 2012][07144] 148826.964-148831.537: GC 1433600K->1393957K (1536000K), sum of pauses 1067.819 ms
[memory ][Wed Nov 28 08:06:48 2012][07144] 148831.627-148835.880: GC 1536000K->1483200K (1536000K), sum of pauses 819.866 ms
[memory ][Wed Nov 28 08:06:52 2012][07144] 148835.958-148840.043: GC 1502400K->1428227K (1536000K), sum of pauses 696.051 ms
[memory ][Wed Nov 28 08:06:58 2012][07144] 148840.121-148845.840: GC 1428227K->1421591K (1536000K), sum of pauses 2038.479 ms
[memory ][Wed Nov 28 08:07:12 2012][07144] 148845.919-148859.476: GC 1422400K->1297787K (1536000K), sum of pauses 9836.237 ms
[memory ][Wed Nov 28 08:07:12 2012][07144] Throwing OutOfMemory: allocLargeObjectOrArray - Object size: 353040, Num elements: 88256
[memory ][Wed Nov 28 08:07:13 2012][07144] 148859.555-148861.120: GC 1302400K->665578K (1536000K), sum of pauses 226.632 ms
[memory ][Wed Nov 28 08:07:13 2012][07144] Changing GC strategy to Generational Concurrent Mark & Sweep
[memory ][Wed Nov 28 08:07:14 2012][07144] 148861.199-148861.419: GC 680200K->157010K (1536000K), sum of pauses 137.983 ms
[memory ][Wed Nov 28 12:19:20 2012][07144] 163987.323: parallel nursery GC 449982K->141655K (1536000K), 60.356 ms
[memory ][Wed Nov 28 16:17:21 2012][07144] 178268.807: parallel nursery GC 450605K->163172K (1536000K), 67.881 ms
[memory ][Wed Nov 28 19:57:51 2012][07144] 191498.731: parallel nursery GC 451275K->163737K (1536000K), 54.393 ms
A snapshot of managed server thread dump is given below
2012/11/28 05:08:49.762 INFO <(DBProcessor.java:158)> [1149165250] -
Execution Time: 4.014
2012/11/28 05:10:06.928 INFO <(ARInvoiceWebservice.java:81)> [1149165250] -
Inquiry Webservice overall request execution time: 4821.064
2012/11/28 05:10:30.652 INFO <(SOAPHandler.java:116)> [1149165250] -
******** soapMessage in fault ******** SOAPMessageImpl[SOAPPartImpl[SOAPEnvelopeImpl[nullSOAPBody[<env:Fault><faultcode>env:Server</faultcode><faultstring>Exception during processing: java.lang.OutOfMemoryError: allocLargeObjectOrArray - Object size: 65552, Num elements: 16384 (see Fault Detail for stacktrace)</faultstring><detail><bea_fault:stacktrace xmlns:bea_fault="http://www.bea.com/servers/wls70/webservice/fault/1.0.0">java.lang.OutOfMemoryError: allocLargeObjectOrArray - Object size: 65552, Num elements: 16384
     at weblogic.utils.collections.CircularQueue.expandQueue(CircularQueue.java:90)
     at weblogic.utils.collections.CircularQueue.add(CircularQueue.java:108)
     at weblogic.xml.babel.stream.XMLInputStreamBase.add(XMLInputStreamBase.java:151)
     at weblogic.xml.babel.adapters.DOMAdapter.adaptNamespace(DOMAdapter.java:107)
     at weblogic.xml.babel.adapters.DOMAdapter.adaptAttribute(DOMAdapter.java:127)
     at weblogic.xml.babel.adapters.DOMAdapter.adaptElement(DOMAdapter.java:158)
     at weblogic.xml.babel.adapters.DOMAdapter.adapt(DOMAdapter.java:71)
     at weblogic.xml.babel.adapters.DOMAdapter.recurseChildren(DOMAdapter.java:197)
     at weblogic.xml.babel.adapters.DOMAdapter.adaptElement(DOMAdapter.java:161)
     at weblogic.xml.babel.adapters.DOMAdapter.adapt(DOMAdapter.java:71)
     at weblogic.xml.babel.adapters.DOMAdapter.recurseChildren(DOMAdapter.java:197)
     at weblogic.xml.babel.adapters.DOMAdapter.adaptElement(DOMAdapter.java:161)
     at weblogic.xml.babel.adapters.DOMAdapter.adapt(DOMAdapter.java:71)
     at weblogic.xml.babel.adapters.DOMAdapter.recurseChildren(DOMAdapter.java:197)
     at weblogic.xml.babel.adapters.DOMAdapter.adaptElement(DOMAdapter.java:161)
     at weblogic.xml.babel.adapters.DOMAdapter.adapt(DOMAdapter.java:71)
     at weblogic.xml.babel.adapters.DOMAdapter.adaptDocument(DOMAdapter.java:96)
     at weblogic.xml.babel.adapters.DOMAdapter.adapt(DOMAdapter.java:64)
     at weblogic.xml.babel.stream.DOMInputStream.open(DOMInputStream.java:53)
     at weblogic.xml.babel.stream.XMLInputStreamFactoryImpl.newInputStream(XMLInputStreamFactoryImpl.java:95)
     at weblogic.xml.schema.binding.internal.builtin.DocumentCodec.serialize(DocumentCodec.java:53)
     at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:192)
     at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:178)
     at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:335)
     at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:304)
     at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.java:651)
     at weblogic.webservice.core.handler.InvokeHandler.handleRequest(InvokeHandler.java:151)
     at weblogic.webservice.core.HandlerChainImpl.handleRequest(HandlerChainImpl.java:144)
     at weblogic.webservice.core.DefaultOperation.process(DefaultOperation.java:551)
     at weblogic.webservice.server.Dispatcher.process(Dispatcher.java:204)
     at weblogic.webservice.server.Dispatcher.doDispatch(Dispatcher.java:175)
     at weblogic.webservice.server.Dispatcher.dispatch(Dispatcher.java:97)
     at weblogic.webservice.server.WebServiceManager.dispatch(WebServiceManager.java:102)
     at weblogic.webservice.server.servlet.WebServiceServlet.serverSideInvoke(WebServiceServlet.java:321)
     at weblogic.webservice.server.servlet.ServletBase.doPost(ServletBase.java:454)
     at weblogic.webservice.server.servlet.WebServiceServlet.doPost(WebServiceServlet.java:293)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3594)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
</bea_fault:stacktrace></detail></env:Fault>]]]]
2012/11/28 05:22:07.188 INFO <(SOAPHandler.java:116)> [2145221434] -
******** soapMessage in fault ******** SOAPMessageImpl[SOAPPartImpl[SOAPEnvelopeImpl[nullSOAPBody[<env:Fault><faultcode>env:Server</faultcode><faultstring>Exception during processing: java.lang.OutOfMemoryError: allocLargeObjectOrArray - Object size: 235368, Num elements: 58837 (see Fault Detail for stacktrace)</faultstring><detail><bea_fault:stacktrace xmlns:bea_fault="http://www.bea.com/servers/wls70/webservice/fault/1.0.0">java.lang.OutOfMemoryError: allocLargeObjectOrArray - Object size: 235368, Num elements: 58837
     at java.util.Arrays.copyOf(Arrays.java:2760)
     at java.util.Arrays.copyOf(Arrays.java:2734)
     at java.util.ArrayList.ensureCapacity(ArrayList.java:167)
     at java.util.ArrayList.add(ArrayList.java:351)
     at weblogic.xml.xmlnode.XMLNode.addChild(XMLNode.java:479)
     at weblogic.xml.xmlnode.XMLNode.addChild(XMLNode.java:435)
     at weblogic.xml.xmlnode.XMLNode.addChild(XMLNode.java:514)
     at weblogic.xml.xmlnode.XMLNodeWriter.write(XMLNodeWriter.java:55)
     at weblogic.xml.xmlnode.XMLNodeWriter.write(XMLNodeWriter.java:105)
     at weblogic.xml.babel.stream.XMLOutputStreamBase.writeXMLEvent(XMLOutputStreamBase.java:77)
     at weblogic.xml.babel.stream.XMLOutputStreamBase.write(XMLOutputStreamBase.java:99)
     at weblogic.xml.babel.stream.XMLOutputStreamBase.flush(XMLOutputStreamBase.java:208)
     at weblogic.xml.babel.stream.XMLOutputStreamBase.flush(XMLOutputStreamBase.java:215)
     at weblogic.xml.babel.stream.XMLOutputStreamBase.addXMLEvent(XMLOutputStreamBase.java:125)
     at weblogic.xml.babel.stream.XMLOutputStreamBase.add(XMLOutputStreamBase.java:173)
     at weblogic.xml.schema.binding.internal.builtin.DocumentCodec.serialize(DocumentCodec.java:71)
     at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:192)
     at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:178)
     at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:335)
     at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:304)
     at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.java:651)
     at weblogic.webservice.core.handler.InvokeHandler.handleRequest(InvokeHandler.java:151)
     at weblogic.webservice.core.HandlerChainImpl.handleRequest(HandlerChainImpl.java:144)
     at weblogic.webservice.core.DefaultOperation.process(DefaultOperation.java:551)
     at weblogic.webservice.server.Dispatcher.process(Dispatcher.java:204)
     at weblogic.webservice.server.Dispatcher.doDispatch(Dispatcher.java:175)
     at weblogic.webservice.server.Dispatcher.dispatch(Dispatcher.java:97)
     at weblogic.webservice.server.WebServiceManager.dispatch(WebServiceManager.java:102)
     at weblogic.webservice.server.servlet.WebServiceServlet.serverSideInvoke(WebServiceServlet.java:321)
     at weblogic.webservice.server.servlet.ServletBase.doPost(ServletBase.java:454)
     at weblogic.webservice.server.servlet.WebServiceServlet.doPost(WebServiceServlet.java:293)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3594)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
</bea_fault:stacktrace></detail></env:Fault>]]]]
Ps: " Do you consider that maximizing the heap space will solve the problem definetly??"
Hope you will understand and will sugest a better solution.
your help is highly appreciated.
Regards.
Mansoor.

How do you use the status column to show progress of a step in an OI?

Hi everyone,
I was just doing a little browsing and noticed the picture at the top of the http://www.ni.com/teststand/ web page. It shows a progress bar in the status column of a step being executed.
I have several applications where this would be a very useful addition. I use the progress bar at the bottom of the OI and sequence editor regularly, but would very much like to show progress of an individual step in the status column. It would be particularly useful where you turn the tracing off into a sequence but want to see that progress is being made through the steps within it...
Anyone know how to do this? I have been unsuccessful in trying to find examples....
Cheers,
Barry

James,
I believe your answer to Bazza's question also applies to my situation, but I wasn't sure so I thought I would ask. I am working on a custom TestStand operator interface in LabVIEW using the UI controls. I would like it to behave as closely as possible to the old Test Executive. Specifically, I would like the operator to be able to see the contents of the sequence file, interact with them, and see the execution results all in the same view. Is that possible? In other words, can I display and interact with a sequence file (display the sequence steps, run selected steps, loop selected steps, etc.) and display the sequence's execution results (including tracing) in the same SequenceView control or do I have to use 2 of them?
Thanks,
Ryan Wright

How to set a user status (complete) when ever system status is set complete

Experts,
We have configured status profile and few user status (say open, pre-release, complete) and assigned the status profile to the item category(zxxx).
The problem we have is if we have a service order that is created with the item (item category zxxx) -- Say the header status is open and the item status is pre-release. Now end user comes and sets the header status to completed - then the item status is still set pre-release. It is not changing to complete as expected.
Yes, the Item system status is set to completed but not the user status. How do I configure to set a complete user status when the header and item system status are set to completed.
Thank you
Edited by: ram on May 4, 2010 8:51 PM

I am not sure if this can be "reverse engineered" in Status profile.
But here is some hint. You can use the BAdI CRM_ORDER_STATUS mehtod AFTER_CHANGE and actually break when the Header status is changed, and set the item status as desired.

How can we access workflow status column out of the box (OOTB).

I have a problem that few of the workflows in production are failed at last stage have status set to "Workflow Errored". Someway I have fixed issue with workflow but I need to modify this status.
I tried adding a custom column and access workflow status column so that I can modify custom column as I want, and show this in views.
But I can't access this without using code, anybody has any idea?
My task is to modify workflow status which are errored out.

You can rerun the workflow once you've fixed it up. This'll change the status to something more successful.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How do I keep my status bar at the top and not moving from side to side and bottom of phone

how do I keep my status bar at the top of my phone? I let my grandsn play a game on my phone and after he gave it back I noticed my status bar would move from the top to the side or bottom etc

Reset, hold both home and power buttons until the iPhone begins to restart itself, ignore the slide to power off slider. Let the iPhone restart itself. Usually takes about 10 seconds of holding both buttons.
Probably do not need this, but Portrait Lock can be set by, pressing home button twice quickly, slide bottom row of icons to the right one time, tap the Portrait Lock icon.

How to reduce the transmission of data when the phone is not used?

When my iPhone is not used the transmission of data is ongoing and I will not stop the 3G, what should I do?

Priya:
It is likely that the BLOB content defined in your table is being stored 'Out-of-Line'. This means that the LOB columns are stored in segments of their own. These then are the segments that may need shrinking.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14249/adlob_tables.htm#i1006363
Varad

How to show a value in column when condition is true?

Assume I have the following simplified SELECT statement:
SELECT a, b, ???
FROM tab;
In the third column a value of "yes" should appear when the following condition is true:
tab.c = tab.d
Otherwise the value should be "no" (or even blank).
How can I achieve this?
The solution should be more general for situation if many tabs are involved,....
Peter

How can I achieve this?
The solution should be more general for situation if many tabs are involved,....So do you expect a generalized SQL statement that handles are arbitrary number of tables with arbitrary column names?
It would be helpful if you provided DDL (CREATE TABLE ...) for tables involved.
It would be helpful if you provided DML (INSERT INTO ...) for test data.
It would be helpful if you provided expected/desired results & a detailed explanation how & why the test data gets transformed or organized.

How to determine the exact key pressed when numlock disabled?

Hi there,
I am trying track the keyboardevent that triggered by pressing numpad keys as hotkey, but when the numlock is disabled, the same keycode, same keylocation was gotten as pressing in the standard keyboard. how can I determine if the numpad was pressed or the other control keys were pressed?
Thank you!
Andy

Hi there,
I am trying track the keyboardevent that triggered by pressing numpad keys as hotkey, but when the numlock is disabled, the same keycode, same keylocation was gotten as pressing in the standard keyboard. how can I determine if the numpad was pressed or the other control keys were pressed?
Thank you!
Andy

IWork Numbers -- how to determine the current selected column/row?

I am trying to write a script that grabs some text from a Numbers spreadsheet based on the selected field. I just can't figure how to actually get the column and row in a way I can use. Here's my start:
tell application "Numbers"
tell document 1
-- DETERMINE THE CURRENT SHEET
set currentsheetindex to 0
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of (tables whose selection range is not missing value)
end tell
if x is not 0 then
set the currentsheetindex to i
exit repeat
end if
end repeat
if the currentsheetindex is 0 then error "No sheet has a selected table."
-- GET THE VALUES OF THE SELECTED CELLS
tell sheet currentsheetindex
set the current_table to the first table whose selection range is not missing value
tell the current_table
set the range_values to the value of every cell of the selection range
set therange to every cell of the selection range
set thecol to column of first item of therange
set therow to row of first item of therange
end tell
end tell
end tell
end tell
It gives me a result like
row "30" of table "table" of sheet "sheet 1" of document "Scheduler.numbers" of application "Numbers"
but what I need is just "30" so I can use it for my scripts. I can't figure how to convert this to a string or some other useful format.
Can anyone help? I like Numbers but I always run into little problems like this, something I can't figure how to do, compared with other scriptable programs.

Search forGetSelParams or better for get_SelParams in the existing threads.
I posted this handler more than 30 times !
Yvan KOENIG (VALLAURIS, France) vendredi 18 mars 2011 17:03:05

How to create primary on a column when redundant data is present

I am interested to add primary key constraint on a column where repeated data is there without affecting the date how can I immplement this.
Can any one help me in this regard.
Thanks
Sanjay

If you have duplicated data and going to specify the primary key constraint on that data it's quite against RDBMS concepts and can't be considered as a relevant idea. Nevertheless Oracle provides you with such tricky method, but once again, it's NOT good idea, change your mind:
SQL> create table t (x int);
Table created.
SQL> insert into t values(1);
1 row created.
SQL> insert into t values(1);
1 row created.
SQL> commit;
Commit complete.
SQL> select * from t;
         X
         1
         1
SQL> create index t_x on t(x);
Index created.
SQL> alter table t add primary key (x) novalidate;
Table altered.
SQL> insert into t values(1);
insert into t values(1)
ERROR at line 1:
ORA-00001: unique constraint (ORACLE_OCM.SYS_C006647) violated
SQL> insert into t values(2);
1 row created.
SQL> select * from t;
         X
         1
         1
         2In this case you have PK constraint and it affects all new DMLs, but
in fact you can't rely on PK.
Rgds.

How can I include "sort name" column when burning a playlist to disc?

I noticed the "sort name" info is missing in the burnt disc. How can I preserve the info? I spent some times in correcting some sorting order in my library and I want that info to be in my backup too.

The sort fields should be getting stored in the files' tags, assuming they have tags. When buring an audio disc this information will be lost. It ought to be preserved when using the iTunes backup function, however you may be better off using a 3rd party backup tool to backup the entire iTunes folder.
N.b. You've posted in the Using iTunes for Windows forum but your sig says you're a Mac User, otherwise I'd recommned SyncToy 2.0 for your backup. I'm not familiar enough with Mac to suggest a suitable replacement.
tt2

How to determine layer 2 status

i need to know how to find wether a NIC has layer 2 connectivity. the command 'ndd -get <driver> link_status' only gives this info if the interface is up but layer 2 connectivity exists wether the interface is up or not.

hI
Purchasing Group responsibility
by default responsible purchasers will come in sc. do one thing - click the detail button right hand side in purchase grp ( basic data) . you can see all responsible purchasers name.
regards
muthu

How to find the payment status for check is bounce or not?

hi all,
i am looking for scenario like how to find check is bounce or not from system.
please help in this, like any tables or function modules for checking the status for check bounce or check cleared in the payment.

Hi,
Normally rejected payments (including cheques) must be processed as IS-U "Returns".
Therefore the returns history report RFKKRF02 (transaction FPM3) will provide you the history of the rejected payment/s.
I hope this gives you what you are looking for.
Regards,
Ivor Martin

How to determine weblogic health status column when it is in NOT OK via wlst?

Similar Messages

Maybe you are looking for