How to disable one Audio port on MSI MB with Realtek HD Audio

Hello MIS gurus.
I have MSI p45t-c51 MBoard with ALC889 Audio chipset. On this board i installed Win XP Pro with Realtek HD Audio Driver 5.10.0.6101.
On back audio plate i use Edifier 2.1 audio over one of the audio port's and HeadPhones over another one.
My question is: Is it possible to disable one of the ports so the sound only come from 1 of the audio devices instead of both.
At this moment, what i do is in the Realtek HD Audio Manager, i set LINE IN for the device i do not want to hear. - Advice if that is bad for the device that is plugged in at that port!
Thanks to all.
Regards.

Just disable the Onboard Audio from BIOS.

Similar Messages

  • How to disable certain form fields from a calculation with a check mark fields.

    How to disable certain form fields from a calculation with a check mark fields.
    In Canada we have to taxes
    I create a form that calculate them to a total
    I need to be able to turn off any of those to taxes to participate to the calculation and their visibile field should become 0
    I was thinking using a checkbox (when checkbox is on (Yes) the tax is calculated, Not ticked (Off) the tax is not calculated and the visible field should show 0 or nothing....
    I really need help on this one — I’m a complete newbie....
    Remark that the second tax is calculated on the sum of what the first tax add (first tax is pan-canadian tax (all provinces).
    The second tax is never use alone (Quebec only (on top of the Canadian one)
    Sometime for outside Canada sell - No tax at all is calculated....
    What should I do?

    I want to tank you to help, really appreciate —>
    This is the code and order... I just trow the checkbox in there (they have, so far, no purpose...)
    The code use is
    var a = this.getField("pricehorstx");
    event.value = Math.round (a.value * 7.25) / 100
    I guess -If the checkBox are check - The tax should be calculate — If “Off” the tax should be not calculated and PriceHST and /or PriceQST should show zero or be empty — The HST is always calculated in Canada, but the QST is added only in Quebec.
    I need to turn both to Zero for international sale.
    Message was edited by: Chacapamac

  • My sound is like echo and i can't solve the problem with realtek hd audio manager

    HP G72 notebook
    Windows 7 64 bit
    Sound is like echo and can't solve problem with Realtek HD audio manager

    It's a Qosmio X300-16M (windows 7 64bit)
    I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
    It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
    And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
    Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
    And I just want to know if it's a curent problem or not... and if someone can fix it

  • How to disable one check box when another is checked

    Hi, I'm a first time user.
    i am trying to make text fields appar and dissapaer when check boxes are ticked. but only alow one check box to be active at one time. 
    I am making a simple form in Acrobat pro 9,
    I have two check boxes Checkbox1 & Checkbox2.
    I have two text fields Textfield1 & Textfield2
    i have added actions to checkbox1 & checkbox2 to 'hide or show' the text fields.
    Action --> on focus (checkbox1) show/hide field (textfield1) is hide
    Action --> on focus (checkbox1) show/hide field (textfield2) is show
    oposite
    Action --> on focus (checkbox2) show/hide field (textfield2) is hide
    Action --> on focus (checkbox2) show/hide field (textfield1) is show
    problem 1 - how to disable checkbox1 when checkbox 2 is ticked.
    or disable checkbox2 when checkbox1 is ticked.  
    my other problem is that this action has the same effect for ticking or unticking the checkbox.
    thanks in advance to anyone who can help.
    can you please write your answer in simple terms. Basically this is the first time i have used acrobat pro so please dont assume any knowledge at all. thansk very much .

    First, I would experiment with just check boxes and learn their properties and how they can interact.
    Have you tried using the same name for 2 check boxes and assign a different "export value" to each check box.
    Have you looked at the values a check box or boxes have when checked or un-checked?
    Have you looked at how the various actions for a field work?

  • How to disable one section in my profile

    Hi,
    Is there any option to disable Total Questions from my profile,
    I try to edit in my control panel, I didnt find such option here.
    Can you share with me how to disable this option from my profile? (or) If admins has only such permissions then, Please disable it.
    SQL> revoke <total_questions> from ckpt; or column masking? ;-)
    Thanks in Advance.

    Billy  Verreynne  wrote:
    CKPT wrote:
    As for what you wrote on the Internet and did or did not do... live with it and hopefully learn from it?Yes, i learned a lot.
    So coming to my question, is it possible?What I actually meant with that is it is almost impossible to undo what one has done on the Internet. Even if the source web page (assuming a vanilla web server) is deleted, copies can remain behind in web time machines and search engine caches.
    So what one does on the net is kind of permanent. And that is something one has to live with and learn from. These days with social media it is even worse in that regard.Billy,
    Got it. Thanks for clarifying.
    I went through thread PLEASE DELETE MY POST (WHOLE THREAD)
    where there is option to edit xml code as per comments of Nicolas. So If my requested option is not available i thought its also a better option.

  • How to disable non secure port on Sun Java System Directory Server 5.2

    Hi, can someone tell me how to disable the non secure port 389 on the SJS Directory Server 5.2? I only see two options for the directory server to listen on the non secure port or both secure and non secure ports. I see that someone mentioned to change the port the loopback ip address but the gui doesn't allow that.
    Any help is appreciated.
    Thanks,
    Mike

    Yep! You can add the loopback address to the listen host attr, directly to the dse.ldif (insntace stopped of course) or ldapmodify the config entry

  • How to disable one F key without disabling the rest

    OK, this is the situation:
    I don't want to disable all the keys because i use them often.
    I've already tried FunctionFlip, but it doesn't seem to work in Final Cut Pro (and the reason I need to disable one of the keys is primarily because I need it for a FCP shortcut)
    is there another way to disable only one key?
    OR - If I were to disable all F keys, how do I reassign some of them back to their default mac function? does anyone know the names of the menu commands for Volume up and down and for mute?
    Thank you so much!

    To use the F keys as assigned in FCP....

  • How to disable one email account in iPlanet Messaging Server 4.5

    Hi,
    Any one can tell me how to disable a single user in iPlanet Messaging Server 4.5.
    Thanks
    Abid

    I wonder what product you're really talking about.
    There was never a product called, "Netscape Messaging Server 4.5". There was 4.1 and 4.15, but the next product was 5.0.
    These are all long discontinued, and nobody should be using them anymore.
    Assuming it's 4.1, check your ldap record for "inetuserstatus" and set it to "disabled", or even "deleted"

  • How to disable one single element in a 2D array?

    Hello,
    I would like to disable one element in a 2D array. its size is constant at least.
    I can change its value by using a 1D array of cluster, but I can't use the property mode easily to disable an element.
    If you have any idea, it will be great.
    Thank you for your help.
    Lolopuf

    Right click on the particular control you want to disable and change the properties on that.  To do it programmatically, create a reference for that specific control and set the Disabled property for that.
    Attachments:
    Example_VI.png ‏15 KB

  • How to disable the FULL SCREEN option in the 'Insert Video and Audio' option

    Hi,
    I've been inserting some MP3's and using an image for pupils to click on to play the sound, the images are 100 pixels by 100 pixels.
    The only issue is that I have the grey rectangle 'Full Screen' box over the picture. This is ideal when I put videos on but not necessary when you have just an MP3. Also I've noticed that the 'Styles' option is greyed out and due to that I can't change the
    colour of the play button.
    I've been inserting MP3's direct from my PC hard drive to the webpage.
    Any help'd be greatly appreciated.

    Hi,
    Per my understanding, you might want to disable the “Full Screen” button and make other customization when there is an audio file in the page.
    By default, when we insert an audio/video file into page via “Insert Video and Audio” button in the ribbon, an OOTB Media Web Part will be added into the page contains
    the file you added, the “Full Screen” button is a part of this Media Web Part.
    In consideration of you might have other requirements on designing the style, I would suggest you create a custom Media Web Part instead which will enable you customize
    the style as you want.
    About creating a custom Media Web Part, you can use the <audio> tag:
    http://www.w3schools.com/html/html5_audio.asp
    http://www.catswhocode.com/blog/mastering-the-html5-audio-property
    http://www.elated.com/articles/html5-audio/
    There are also other powerful JavaScript audio plugins:
    http://kolber.github.io/audiojs/
    http://jplayer.org/
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • How to create one file to 2 output files with a condition?

    hello friends,
    i have a scenario to split one file into two different files using a condition.
    based on the account number ( 100's of accounts) i have to split the file into two. ex: acc# 1, acc#2, acc#3 goes into one file rest of the account number records goes into another file how to build the logic.
    thanks
    sri

    Hi Sri,
    One way-
    You can achieve this with the help of Java Mapping..
    In the Java Mapping, read input, parse the input while parsing the document , group the data into 2 structures and in the Interface Mapping use this java mapping. So here you have 2 target message interfaces..
    Hope this helps,
    Regards,
    Moorthy

  • Having issues with Realtek HD Audio Manager, need help

    Sorry if I am in the wrong section for this,
    I just got a Z87-G45 MB (v1.10) latest is: 1.30 which has the Realtek HD Audio onboard, now to the problem:
    I have the Logitech Z906 speakers which is a 5.1 setup and I have them plugged through the Digital S-PDIF/out on the back panel (Green) but the problem is, the computer isn't detecting the speakers and since it doesn't detect them, I don't have the option tab to manage the audio settings in the Realtek HD Audio Manager Control Panel so that I can set it to 5.1/2.1/quad, etc. Even when I disconnect/connet the digital cable, it doesn't detect that it's been disconnected/connected and the speakers appear as "Ready" in the Playback Devices menu .
    Another problem I have is that there's audio, but the audio level is way too low, even at 100% and I think this has to do with me not being able to set up Realtek to 5.1.
    When I plugged my headphones through the front panel, everything worked fine and the option to set up the audio for stereo, etc. appeared.
    I did a rollback on the Realtek HD Audio Drivers
    Current: 6.0.1.6873
    Latest: 6.0.1.6959
    Things I've done:
    1.Re-install Realtek drivers from motherboard CD
    2.Update drivers
    3.Disconnect/connect the cable to see if the computer would recognize it
    4.Check the Playback Devices, choose Digital SPDIF green as default
    5.Turned off all enhancements
    6.Set the Realtek Digital Audio level to 100% in the properties tab
    I'll provide some screenshots of what I see:
    What I should be able to see:
    Also:

    Try this.  Right click on the Audio icon in the tray.  Then, click  Properties.  This opens the 'Sounds and Audio Devices Properties'.  Check all of the settings to assure they are correct.  You may have to change the settings one at a time to see if one of them does the trick.  When I have had a problem with the speakers not being recognized, it was incorrect speakers chosen.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • AppleTV audio out to old amp with only analog audio

    I'm thinking about getting the Apple TV for both video and for playing my music on my home stereo system. I currently have an old amp with only analog audio capabilities, but the new ATV looks like it only supports digital optical out, and the digital to analog converters I've looked for seem pretty expensive. How can I get the audio from my music collection (iTunes) to play wirelessly through ATV through my amp?
    I currently also have an Airport Express which I use for audio, but I was thinking of selling that and just using the ATV since the ATV can essentially do the same thing as the AX with added video benefit. I've seen some threads on streaming audio from the ATV to the AX, but do I really need both? Seems like there should be another way.
    I was thinking of connecting the ATV to my TV via HDMI cable for audio, and then using an analog audio out from the TV to my amp. But, if I'm correct, that would only provide me with sound coming from the TV. It wouldn't give sound out from iTunes, for example. Is that right?
    Are there any other options?

    Followings are my observations in audio streaming with Apple TV 3 and Airport Express through AirPlay protocol:
    -- Apple TV 3 come with only digital audio outputs through HDMI and optical SPDIF outputs. If you connect optical link from the optical output to optical input of any DAC and HDMI cable from the HDMI output to HDMI input on TV set, audio output will be transmitted through both digital outputs. Thus is is not necessary to turn on TV set unless visual feedback is required. There is no audio analog line output for Apple TV 3.
    -- AirportExpress come with single combo mini jack (digital + analog) for audio output regardless of old/new models. You can connect either digital optical link (with Mini/Toslink adaptor) to digital input of DAC or analog line cable (inferior) to analog line input of amplifier. When analog line is used, digital-to-analog conversion is done by DAC built into AirportExpress for which do not expect quality is as good as most external DAC models. What do you expect from a single-chip DAC implementation vs standalone DAC models cost few thousand dollars ? Moreover analog line is susceptible to interference more than digital line.
    So the decision to use Apple TV or AirportExpress, analog or digital transmission for audio streaming depends on whether you need WiFi base station features of AirportExpress to establish wireless network and quality of your audio system to justify all-digital audio transmission. Followings are what I use in audio streaming from iMac/iPad mini /iPhone 5 to audio system in living room. Quality of audio output is comparable with Sonos Zone Player as audio source.
    Apple AirPort Extreme wireless base station (802.11n, 5GHz)
    Apple TV 3 (firmware 5.1.1, Xtreme HD Toslink optical cable)
    Antelope Audio Zodiac DAC
    Bel Canto power amplifier
    Bowers &amp; Wilkins 683 speakers
    Yamaha YST-SW215 subwoofer

  • How to specify one ethernet port for network home directories (other for normal filesharing)?

    So I'm trying to get Home Directories up and running on a 10.6.8 Xserve (waiting until I get my NFS sharepoints migrated to a Linux server [for other reasons] before moving up to 10.7 Server). But posting here since that will be happening in the next few weeks, and it might be applicable now (so I can at least get that resolved ahead of time).
    I have a different DNS entry for each ethernet port: server.office.domain.com at 192.168.0.11 for the first, and homes.services.internal at 192.168.0.10 for the second. DNS lookups for both resolve correctly (as does the reverse lookup).
    If I use the Server Admin to pick a sharepoint as an automount for Home Directories, everything is fine, but it picks the server.office.domain.com hostname. Picking that works just fine, but that is also the connection that feeds the filesharing. I'd prefer to split that home directory traffic out onto the second ethernet port. So I tried just duplicating the initial connection (since it can't be edited directly in Workgroup Manager) and changing the hostname to the internal one, but I get an error when attempting to log in (the client login screen gives a very helpful "Couldn't login because of an error" error message) and don't see anything in the server logs.
    The client machine shows the following line:
    Code:
    10/20/12 5:27:42.688 PM authorizationhost: ERROR | -[HomeDirMounter mountNetworkHomeWithURL:attributes:dirPath:username:] |
         PremountHomeDirectoryWithAuthentication( url=afp://homes.services.internal/Users,
         homedir=/Network/Servers/homes.services.internal/Volumes/HomeDirectories/Users/ user123, name=user123 ) returned 45
    (added line breaks so it didn't extend off the page)
    So it looks like this is failing because the automount isn't in place, but I'm not sure how to work that out either (i.e. how do I add that making sure it uses the internal hostname?).
    Any suggestions on getting this to work?
    I realize one solution is just to LACP the two ports, but that is a different ball of wax (I may do that later if I get a 4 port ethernet card and performance limitations demand it).

    A possible solution might be this.
    On ADSLBOX and CABLEBOX configure different subnets for the LAN, e.g.
    ADSLBOX:    192.168.1.0/24
    CABLEBOX: 192.168.2.0/24
    The MEDIABOX gets these static IPs:
    ADSL-LAN: 192.168.1.2
    CABLE-LAN: 192.168.2.2
    On the MEDIABOX, configure the two network interfaces using two routing tables.
    The ADSL-LAN routing table
    ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2 table 1
    ip route add default via 192.168.1.1 table 1
    The CABLE-LAN routing table
    ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2 table 2
    ip route add default via 192.168.2.1 table 2
    The main routing table
    ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2
    ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2
    # use the CABLE-LAN gateway as default, so general internet traffic from MEDIABOX runs over CABLEBOX
    ip route add default via 192.168.2.1
    define the lookup rules
    ip rule add from 192.168.1.2 table 1
    ip rule add from 192.168.2.2 table 2
    To test the setup:
    ip route show
    ip route show table 1
    ip route show table 2
    I don't know how to persist something like this in ArchLinux using netctl. Might require to write a special systemd unit for it. Above is a working example from a RedHat box at my company.
    Last edited by teekay (2013-12-04 07:42:22)

  • How to disable one of my two ATI graphic cards on my Arch?

    Hello.
    I have two graphic cards ATI Radeon on my laptop, one is a Radeon 4200 and other is Radeon 6370, and I want to remove one of them. I looked for disable the module, but is it the same module that load both cards. I'm using the driver xf86-video-ati and is 'radeon' the module that works. I'm not intersting play games, I only want a system to work. With both cards actived, the cooler is always on, warming so much the computer. And, when is working in the battery, I can't lower the power below 30 Watts.
    Here is the part of my lspci -k command about the cards:
    01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]
        Subsystem: Hewlett-Packard Company Device 1445
        Kernel driver in use: radeon
        Kernel modules: radeon
    02:00.0 VGA compatible controller: ATI Technologies Inc Robson CE [AMD Radeon HD 6300 Series]
        Subsystem: Hewlett-Packard Company Device 1445
        Kernel driver in use: radeon
        Kernel modules: radeon
    Is there any way to me disable the Radeon 6300?
    Thanks.

    witor.eel wrote:Yes, I tried. But without sucess. And when I tried, something wird happens: I executed the command with sudo, and I had no permission to write the configuration. Even in the console tty1, with gdm stoped I hadn't permission.
    Sudo only applies to the command, not the redirection.  You would need to use
    echo low | sudo tee /sys/class/drm/cardX/device/power_profile >/dev/null
    Last edited by alphaniner (2011-10-06 14:17:24)

Maybe you are looking for