How to display icon status in table control

hi, i trying to display icon in table control its not displaying
i given below statment.
DATA: BEGIN OF WA_MARA,
        ICON1(4) TYPE C,
         END OF WA_MARA.
     INCLUDE <list>.
MOVE ICON_GREEN_LIGHT TO IT_MARA-ICON1.
APPEND IT_MARA..
when i debugging it display green icon but after run the program its display ' @08@ '   in table control.
how to display green icon in table control help me.

Hi,
check the link:
Table control in custom infotypes

Similar Messages

How to use PF status in Table Control?

I have made 1 table control. Now I need to use three buttons like SELECT, DESELECT, DELETE the rows of table control using PF STATUS. Can you plz help with the Code.

Hi.
Refer this code.
The following example processes a table control with LOOP with parallel loop using an internal table. By using function codes you can sort columns and delete rows from the internal table. The ready for input status of the table control fields is controlled using a function code.
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF flights-cols,
      lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
      TABLES demo_conn.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES lines.
flights-lines = lines.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
        ENDIF.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols
                              WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
        ENDLOOP.
      ENDIF.
ENDCASE.
ENDMODULE.
Reward all helpfull answers.
Regards.
Jay

How to display Quantity fields in Table control

Hi,
I need to display quantity fields in my table control based on the resb-meins field. i.e. I need a feature similar to qname of ALV Grid Control in Table control.
Can any body help me.
Regards,
Srinivas

hi,
use the charecter filed and convert u field in to charecter
check this link
Re: character to decimal conversion
~linganna

How to display an status Icon in Table UI web dynpro ABAP?

Hi Experts ,
How to display an status Icon ( Traffic light ) in Table UI web dynpro ABAP? can somebody tell with a coding example. also I need to update status on condition so whats the best way?
Thanks in advance.
Regards,

Hi Laeeq,
click on table cntrol n place it on the screen..
now click on the icon button n place it in the table control area.. a column of icons get created. name it (say) ICON.
in the PBO..
loop at internal table and call module in the loop (say) .
MODULE ICON_DISP.
now in the module try the foll code :
module icon_display output.
check some condition and assign the icon to the variable icon_r
icon_R = 'ICON_GREEN_LIGHT'.
CALL FUNCTION 'ICON_CREATE'
    EXPORTING
      name                        = ICON_R
    TEXT                        = ' '
    INFO                        = ' '
    ADD_STDINF                  = 'X'
   IMPORTING
     RESULT                      = ICON
EXCEPTIONS
    ICON_NOT_FOUND              = 1
    OUTPUTFIELD_TOO_SHORT       = 2
    OTHERS                      = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
where icon(35) and icon_r(35) type c .
hope this helps u..
Regards
Aparna

How to display check box in atable control

hi
here is my requirement
how can i display check box in table control and also when i check that check box it has to dispaly one pop up screen with the records of table control row
points will be rewarded
Thanks&Regards
Nagesh.Paruchuri

Hi,
See this code for how to display check box in atable control
*---- Table declaration.
TABLES: KNA1.
CONTROLS TC1 TYPE TABLEVIEW USING SCREEN 200.
CONTROLS TC2 TYPE TABLEVIEW USING SCREEN 300.
*---- Data declaration.
DATA:OKCODE LIKE SY-UCOMM.
DATA:V_KNA1 LIKE KNA1.
*DATA:ERROR TYPE C.
*---- Internal Table declaration.
DATA:BEGIN OF IT_TAB OCCURS 0,
      CHK,
      VBELN TYPE VBELN_VA,
      KUNNR TYPE KUNAG,
      ERDAT TYPE ERDAT,
      AUDAT TYPE AUDAT,
      VBTYP TYPE VBTYP,
     END OF IT_TAB.
DATA:BEGIN OF IT_TAB1 OCCURS 0,
      VBELN TYPE VBELN_VA,
      POSNR TYPE POSNR_VA,
      MATNR TYPE MATNR,
      MATWA TYPE MATWA,
      PMATN TYPE PMATN,
     END OF IT_TAB1.
*&      Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OKCODE = SY-UCOMM.
CASE OKCODE.
    WHEN 'DISP' OR SPACE.
      SELECT *
         FROM VBAK
         INTO CORRESPONDING FIELDS OF TABLE IT_TAB
         WHERE KUNNR = KNA1-KUNNR.
      IF SY-SUBRC <> 0.
        MESSAGE 'No sales document exists'(001) TYPE 'I'.
      ENDIF.
      LEAVE TO SCREEN 200.
      CLEAR OKCODE.
*--- To leave Transaction
    WHEN 'BACK' .
      LEAVE PROGRAM.
      CLEAR OKCODE.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module validate_kunnr INPUT
MODULE VALIDATE_KUNNR INPUT.
V_KNA1 = KNA1.
SELECT SINGLE *
    FROM KNA1
   WHERE KUNNR = KNA1-KUNNR.
*-----Process error condition
IF SY-SUBRC <> 0.
    CLEAR KNA1.
    KNA1-KUNNR = V_KNA1-KUNNR.
    CASE OKCODE..
      WHEN 'BACK' OR 'EXIT' .
        LEAVE PROGRAM.
    ENDCASE.
    MESSAGE 'Customer Does Not Exist'(002) TYPE 'I'.
    LEAVE TO SCREEN 100.
ENDIF.
ENDMODULE.                 " validate_kunnr INPUT
*&      Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'PF'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
MODULE USER_COMMAND_0200 INPUT.
CASE OKCODE.
    WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
      LEAVE TO SCREEN 100.
      CLEAR OKCODE.
      CLEAR IT_TAB1.
    WHEN 'DISP' .
      CLEAR OKCODE.
      READ TABLE IT_TAB WITH KEY CHK = 'X'.
   IF SY-SUBRC = 0.
        SELECT VBELN   POSNR MATNR MATWA PMATN
     FROM VBAP
     INTO TABLE IT_TAB1
     WHERE VBELN = IT_TAB-VBELN.
        IF SY-SUBRC = 0.
          SORT IT_TAB.
          DESCRIBE TABLE IT_TAB LINES TC1-LINES.
          LEAVE TO SCREEN 300.
        ELSE.
          MESSAGE E016(YBHV).
        ENDIF.
      ELSE.
        MESSAGE 'Please select one record' TYPE 'I'.
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Module STATUS_0200 OUTPUT
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'PF3'.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_C.OMMAND_0300 INPUT
      text
MODULE USER_COMMAND_0300 INPUT.
SET PF-STATUS 'PF3'.
CASE OKCODE.
    WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
      CLEAR OKCODE.
      LEAVE TO SCREEN 200.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0300 INPUT
*&      Module modify INPUT
MODULE MODIFY INPUT.
MODIFY IT_TAB INDEX TC1-CURRENT_LINE.
ENDMODULE.                 " modify INPUT
*&      Module okcode OUTPUT
      text
MODULE OKCODE OUTPUT.
CLEAR OKCODE.
ENDMODULE.                 " okcode OUTPUT
Reward Pointsa If usefull
Regards
Fareedas

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

Add change Icon in the Table Control tool bar.

Hi Abapers,
I need to add "change" icon in the table control. I added it but when I click on it is not working.
My requirement is that when I run my custom report, all the fields should be shown is in display mode. Then when I click on the "change" icon, all fields should be enabled for change.
I have already referred to the standard progs BCALV_* but it does not have the "change" icon.
plz give me any reference prg or sample code.
Thanks
Nani.

Hi Nani,
Track the function code of change icon in user command. if it is clicked then put a flag eq X.
check that flag in PBO, if it is eq X then screen-input = 1 or vice versa.
try this code:
in PBO:
LOOP AT SCREEN
IF WS_EDIT = 'X'
SCREEN-INPUT = 1
ELSE
SCREEN-INPUT = 0
ENDIF
MODIFY SCREEN
ENDLOOP
Hope it will work fine
Regards
Krishnendu

Problem in displaying o/p in Table Control

Hi ,
while displaying in table control.
its is displaying line twice.
I have some contains in iti itab.
which i am displaying itf itab through table control..
i have coded like this...
PROCESS BEFORE OUTPUT.
MODULE STATUS_0112.
LOOP at itf   WITH CONTROL TC CURSOR tc-current_line.
    MODULE FILL_TABLE_CONTROL.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP at itf.
    module read_table_INPUT.
ENDLOOP.
MODULE USER_COMMAND_0112.
*&      Module STATUS_0112 OUTPUT
      text
MODULE STATUS_0112 OUTPUT.
SET PF-STATUS 'ZTC'.
SET TITLEBAR 'xxx'.
DESCRIBE TABLE iti LINES tc-lines.
ENDMODULE.                 " STATUS_0112 OUTPUT
MODULE fill_table_control OUTPUT
MODULE fill_table_control OUTPUT.
loop at iti   .
READ TABLE itf with key ingr_code = iti-ingr_code
                           ingr_desc = iti-ingr_desc.
        MOVE iti-INGR_CODE TO ITF-INGR_CODE.
        MOVE iti-INGR_DESC TO ITF-INGR_DESC.
        MOVE iti-CONC TO ITF-CONC.
        MOVE iti-QUANTITY TO ITF-QUANTITY.
        MOVE iti-UOM TO ITF-UOM.
        append ITF ."index tc-current_line.
        endloop.
ENDMODULE.                    "fill_table_control OUTPUT
can any one help me

loop at iti .
READ TABLE itf with key ingr_code = iti-ingr_code
ingr_desc = iti-ingr_desc.
MOVE iti-INGR_CODE TO ITF-INGR_CODE.
MOVE iti-INGR_DESC TO ITF-INGR_DESC.
MOVE iti-CONC TO ITF-CONC.
MOVE iti-QUANTITY TO ITF-QUANTITY.
MOVE iti-UOM TO ITF-UOM.
append ITF ."index tc-current_line.
endloop
You dont need to append the data , you have to Modify the data.
Problem is with the above code.
Correct to this...
MODULE fill_table_control OUTPUT.
READ TABLE itf index tc-current_line.
MOVE iti-INGR_CODE TO ITF-INGR_CODE.
MOVE iti-INGR_DESC TO ITF-INGR_DESC.
MOVE iti-CONC TO ITF-CONC.
MOVE iti-QUANTITY TO ITF-QUANTITY.
MOVE iti-UOM TO ITF-UOM.
endloop.
ENDMODULE. "fill_table_control OUTPUT
Regards
Vijay Babu Dudla

How to Display multiple records in Table in VC without using BAPI.

Hi All,
I am working on Visual composer (NW2004s SP10). I am trying to display Poitems from BAPI_PO_GETDETAIL. I am creating my front end using VC. I have created one form and one Table where I want to display POItems. I am writing my logic of retrieving data from BAPI in CAF.I am connecting them in Guided procedures.When I run my process in Guided Procedures I am getting single row displayed in table. Can Anyone help me how to display multiple rows in table.
Regards,
Sheetal

Hi Sheetal,
if the BAPI returns a table, then you get multiple rows. From which system is the BAPI, so that I can check the BAPI to give you further information.
Best Regards,
marcel

How to add a column in table control

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.

Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards

How to display the status of a SubVI on the front panel?

Hi,
I am writing a program to control an instrument through a serial communication port. The control and communication functions are integrated in a SubVI and they work fine.
In the front panel of the main VI, I want to add some indicators to display the status of those controls in real time, such as using some LEDs to show whether the program is running in some loops of the SubVI, or use some indicators to show some variables in the SubVI.
I tried using global variables, but I can't make them work in real time (or maybe I didn't do it right). The values of the global variables are actually changing on the fly, but the indicators on the front panel wouldn't reflect those changes until the program return
ed from the SubVI.
Is there a way to do this in Labview 6.0.2?
Your earlist help is very much appreciated.
Best regards,
Hua

Hua,
I have attached an example in which a front panel boolean indicator is toggled in the subvi. Also, a front panel stop button is used to stop the loop execution in the subvi. References are passed to the subvi instead of the actual control values.
Without seeing your code I'm not sure what was going on with the globals, but you had to have a data dependency somewhere which was keeping the code from running until after the execution of the subvi. The code must be totally independent of the subvi in order to run. Also, in order for the update to work it would have to be operating in a loop.
Attachments:
Main.vi ‏13 KB
subvi.vi ‏20 KB

How to create vertical Scrollbar in table control?

Dear All,
How to create vertical scrollbar in table controll.?
regards,
Dharmesh

Hi
It should be created automatically, if you can't see it, try to set the field lines of table control
PROCESS PBO
MODULE SET_ATTR_TC.
LOOP AT ITAB WITH .....
ENDLOOP.
MODULE SET_ATTR_TC.
DESCRIBE TABLE ITAB LINES SY-TABIX.
<TABLE CONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max

How can I work lsmw with table control using mm01 appl?

Hi
How can I work lsmw with table control using mm01 appl?
Is it difefrent the way we handle table control in BDC?
Thank You

Hi
How can I work lsmw with table control using mm01 appl?
Is it difefrent the way we handle table control in BDC?
Thank You

How to display icon symbols for a field in se38 program

HI
IAM VIJAY. PLS GIVE ME THE SOLUTION .
how to display icon symbols for a field in se38 program.
WITH REGARDS.
VIJAY.

Hi
you cab use INCLUDE <ICON> and use standard icons provided by sap.
Sample code:
WRITE /20(2) ICON_DATE AS ICON.
WRITE /20(2) ICON_TIME AS ICON.
WRITE /20(2) ICON_ADDRESS AS ICON.
Thanks!!

How to get value on the table control in infotyp e0008

Dear Freinds
I have written a user exit ZXPADU02 for my requirement
as per the requirement in i have calculated wa-poo8-bet01 = wa_p0008-ansal/12 and i have passed on to the INNNN structure .
Nowe when do a Create or Copy for a rcord in infotype 0008 iam not
getting value on Q0008-betrg field on the SCREEN , since it is table control how to get data on the table Control Cell .
Please let me knlow
regards

Hi Syamala,
The try to find the name of the table control and pass the values to it.
Of course you have to loop and endloop, the table control and mofidy it from the work area.
Message was edited by:
Sera

How to display icon status in table control

Similar Messages

Maybe you are looking for