How to display op amp as 14-pin chip rather than 4 individual amp circuits?

As the title says; can I change the way Multisim displays an op amp from 4 individual amp circuits to 1 14-pin chip?
I'm just interested in placing the chip and building my components around it.
thanks.
SCXI- 1000 Chassis w/ 1346 adapter
PCI 6281 DAQ card
SCXI- 1520 Bridge Board w/ 1314 Terminal Block (x2)
SCXI- 1180 Feedthrough Panel w/ 1302 Block
Signal Express 2014.
Win7 Enterprise

Hi there,
There are two ways to do this, one is to use the hierarachical block to represent these four Op amps, you can insert this block in another new blank sheet.
Click Place ==> Hierarchical block from file and then you can see the 14Pin clock on your sechamatic.
But I do not recommand this method, because for your future PCB design, this is gonna be hard to assign the footprint. If you are only interested in placing the chip and building the components around it, this can be a way.
Another method is to use the Componnet wizard under the Tools menu. You can sign a customized multi-sectional component with both model and footprint together. (Or just the footprint to see the layout) The following article might be helpful to design your own component.
Creating a Custom Component in NI Multisim
http://www.ni.com/white-paper/3173/en/
Attached is the hierarachical block.
Hope this helps.:-)
Regards,
Chen_T
National Instruments
Attachments:
14Pin_Chip.ms13 ‏87 KB

Similar Messages

I have created a Muse site for a client that wishes to host with Business Catalyst. How do I publish the site with their account rather than using one of my free sites?

I have created a Muse site for a client that wishes to host with Business Catalyst. How do I publish the site with their account rather than using one of my free sites? This is so I can keep my free ones for personal projects but also so they can pay for their own hosting. I am happy to set it all up for them but not sure what to do.

Hi
You can use their BC login details and use them , which on publish the site will be under their account.
Please change the BC login from Edit > Preferences > Publish > Switch Accounts , for Mac it would Adobe Muse > Preferences
Thanks,
Sanjit

I use Mail. How do I attach a file as an icon rather than showing the full text in the message?

I use Mail for my email messages. How do I attach a file as an icon rather than showing the full text in the message box?

Glad you got it working! Incidentally, if you have a relatively new Apple mouse (Magic Mouse or Mighty Mouse should work), you should be able to enable right-click, if you'd like it, by going to System Preferences - Mouse - and turning on "Secondary click". Third-party mice, like Logitech or Microsoft, should have right-click automatically.
Matt

How do I get iBook open at the bookshelf rather than one of my books?

How do I get iBook to open to the bookshelf rather than a book? I hit the iBook icon, it opens at a page in a book. How do I get to the bookshelf?

If it is opening to a book, then when you are exiting the app you are not going back to the bookshelf first. Before you click the Home button to exit the app, tap the Library button in the upper left corner of the display. That will take you back to the bookshelf so the next time you open the app it will open to the bookshelf instead of the last book you were reading.
Hope that helps!

When printing, how can I spool/process on the printer itself, rather than process the job in Illustrator?

Is this related to setting up a PPD?
We are using an HP Designjet T7100 plotter to print out large wall maps (108"x108") with incredible amounts of detail (about 30 layers, with varying transparency, and everything from mid-sized polygons and lines to thousands of points). It's an enormous job, I know, but certainly possible. The workflow involves creating EPS layers, and running them through Distiller to create PDFs which are obviously the map layers.
In the past, we have been successful in printing out high-resolution maps. We are now experiencing "Out of Memory" errors if we try to print from InDesign, and Illustrator takes well near an hour to process a map.
This morning, we printed a 42x60 map in low-res - the map printed successfully, albeit in about 20 mins. After printing, I went to the plotter, selected the job from the front panel, and re-printed it from there. It took 30 seconds to print.
Obviously, the job was already processed on the plotter and that made printing easier. My question is, is there a way to get the plotter to process jobs rather than Illustrator? How can I set spooling to be handled directly by the printer? Illustrator is using 2GB of memory just to process jobs - absolutely ridiculous.
I appreciate any feedback! Hopefully from Adobe
Thanks,
C
EDIT: I also wonder if this is a network issue?

Hello there! Welcome to the forums @kmmo
I read your post about how you are trying to cancel a print job from the printer. I would like to know if you see an "X" on the printer display screen while the print job is in progress, and if so, try pressing the "X" and that should cancel the job.
Let me know your findings
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I get an app icon to show rather than have a black icon showing?

One icon on my iPad is black. I know the icon for this app is not all black. How can I get it to appear as the actual icon rather than all black.

Is it A App from the Apps store if it is Delete then go to Apps store &put back on again
If it,s one that was on ipad at set up try holding power button down & menu button
Until Apple Logo come on let go and wait do not move red slider
No data will be lost.
BSYDD uk

Adobe Captivate 4 - How do I include the playbar in the movie, rather than below it?

Hi,
As the title says, how can I have the playbar displayed inside the movie window rather than as a seperate entity below it?
We used Captivate 1 up until recently to make our training videos. We would use the playbar "PresenterSilver" and then insert text boxes into the slides as a sort of guide as to what section the user was currently viewing. We would also use this to show the author and the date. A static image was used as a background also (this was created in Fireworks to look the same as the PresenterSilver background).
This setup worked fine for all our movies. However when we upgraded to Captivate 4 the PresenterSilver skin is no longer there. The playbar is also no longer part of the movie but is below the window.
I was wondering if it possible to include the playbar the way it used to be. If not, then can someone suggest a work-around? I was looking at it earlier and I see that you can use image files as backgrounds around the player. This is not ideal as I think that the images remain static for the entire movie. And we could not have a set image (e.g. Part 1 for slides 1-3, Part 2 for 4-6 etc.) for different slides, it would have to be the same the entire way through. If I am mistaken please let me know.
Thanks for your help,
Eoin.

Hi there
Unfortunately Adobe changed the playing field with version 4. You are no longer able to have the playbar occupy part of the main movie.
Please report this as a bug to the development team. The link is in my sig.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Displaying specified colors on the pie chart rather than default colors

Any ideas on how I can display my own colors on the pie charts rather than displaying default colors?

Hi,
You can specify your own colours by changing the default CSS styles.
Go to the Chart Attributes for the pie chart, and in the CSS section select Yes in the "Use Custom CSS" option. You can now edit the CSS for the chart.
At the bottom of the "Custom CSS, inline" setting, you need to add in two lines for each possible segment of the chart. Something like:
rect.data1{stroke:#FFFFFF;stroke-width:0.5;fill:green;}
path.data1{stroke:#FFFFFF;stroke-width:0.5;fill:green;}
rect.data2{stroke:#FFFFFF;stroke-width:0.5;fill:yellow;}
path.data2{stroke:#FFFFFF;stroke-width:0.5;fill:yellow;}
rect.data3{stroke:#FFFFFF;stroke-width:0.5;fill:red;}
path.data3{stroke:#FFFFFF;stroke-width:0.5;fill:red;}
This will set the colours of the first three segments to green, yellow and red respectively. Add in more rect.datan and path.datan entries until you have accounted for the maximum number of segments that your chart may contain.
Regards
Andy

How can I convert an iphoto to a file rather than a picture?

I have several friends who would rather get my email with a file attached rather than photos? How can I do this with Iphoto?

Try this: in Mail's Composing preference pane set the format of the emails to plain text. Then once the photos are in the email Control-click on them and select "Show as icon" in the contextual menu.
That might let them see the photos as icons/attachments rather the view the photos. A lot depends on how they have their email client setup.
The sure fire way is to zip/compress the photos and adding the zipped file to the email.
The recipient will have to unzip the file at the other end to get the image files.
OT

How do I see the charts for all countries rather than just my own country simultaneously in iTunes? The album chart...

I produced a song on Lecrae's new album, Gravity, "Higher" f/Tenth Ave North, which is #1 in the US today upon its release. But I've heard that it also topped charts in other countries as well, and do not know how to adjust the Top Album Charts view to show me the top 10 albums in each country rather than just in the US. I've done it before, but over a year ago when Rehab: The Overdose dropped, but can't recall how I did it. Please help! Thanks and God bless...

I agree that this does work. Thanks.
However, I now have the issue that I scroll the whole screen down to show the shows at the bottom. When I highlight the last show, the 10 shows are not visibile as they are at the top of the screen. I have to scroll the whole screen back up to the top to see episodes.
This is not the most elegant solution but at least with lots of double scrolling, it is possible.

Pre-order shipment for new IPhone 5 pushed back to 10/5. How can I go to store and pick up rather than wait?

I pre-ordered shipment of the IPhone 5's 9/14 like many others, and now it pushed back to 10/5. How can I go to store and pick up at upgrade rate rather than paying full price?

Thanks for the thought... ordered direct from Apple. I'm on AT&T, so I called them to work through their network. They said they couldn't help me until I cancelled my orders through Apple. Talked to an Apple store rep, and they said they had a customer that tried that - cancelled orders, then drove to store only to find they were not eligible for an upgrade. She called AT&T, and they had no solution, and said that sometimes it takes 48 to 72 hours for the system to reinstate upgrade eligibility.....I would have originally ordered from AT&T, but couldn't get into their website, so ordered through Apple - mistake.

How do I get javadoc to open in window rather than tab?

Hi,
Does anyone know how to get javadoc to open in a new window rather than a tab?
Thanks,
Will
Message was edited by:
decuser

At this time that feature is not available. If you are trying to view Javadoc and Code at the same time you can try a split pane view that places both documents side-by-side.
--RiC

How to tell AE CS6 to use bundled Mocha rather than Pro?

I recently upgraded my bundled Mocha from AE CS6 to Mocha Pro 4, but for some unknown reason, it won't let me export shape data in Mocha. There seems to be no data at all, as even trying to paste in Notepad results in nothing. Tracking data, however, works fine (both in AE and Notepad).
Since I cannot figure out any solution in Mocha, the only thing I can do is use bundled Mocha rather than Pro... but I do not know how to tell AE to use bundled Mocha rather than Pro when I click 'Track In Mocha' (...a setting which was changed when Pro was installed).
Does anyone know where/how I can switch it to Mocha bundled when you click on Track In Mocha? (or, does anyone have any idea why Pro would not export shape data, whereas the same project in bundled Mocha did?)
If anyone has any answers or theories, please let me know ASAP, as I have a project I'm trying to complete, and (as luck always has it) the weekend is now upon us, and support is closed over the weekend.

I tried connecting MBP and TC via Ethernet - after verifying the settings that you suggested - and it does not work: if I turn Airport off, Time Machine says it can't find the TC
Any other sugestions?
Ok, then ethernet is not getting an ip address from the TC and is plugged in wrongly..
You still didn't give me any idea of what actual model the linksys is.. and why is it in the network.. Is it a modem router?? If you have cable internet just throw it away and use the TC.
If you have the linksys as modem, then bridge it.. turn off wireless and run pppoe client on the TC.
If the ISP does not allow pppoe client mode then simply use the TC in bridge. Turn off all wireless in the linksys and just use the TC.
Still need info on how everything is setup to analyse the problem.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How can I display a compilation album as one album rather than as separate songs? (each different artist shows with the same album art)

I want a compilation album, consisting of different artists, to all be included within the one album folder. Currently when scrolling through my ipod classic each artist has its own album folder, even though they originate from the same album e.g. "The Best Rock 'n' Roll Album in the World Ever" consists of two discs (50 songs). Each artist's song shows as a 'separate album' of one song, each with the same album artwork. I want all of those on Disc 1 to be under one album cover and similarly for those on Disc 2.

Select all the tracks on disc 1 and via Get Info, change the Album Artist to Various Artists and turn on the compilation flag. This is iTunes 12:
Then repeat for disc 2.

How to display op amp as 14-pin chip rather than 4 individual amp circuits?

Similar Messages

Maybe you are looking for