How to display the o/p based on i/p in mpp

Hi frnds,
IN MPP,
use 2 tables ztest1, ztest2
Input fields :repno, plant, date, material (but date is get from user others are get from ztest1 table)
in ztest1some records is their(es repno=100 etc,)
Giver the repno then press "ENTER" button display the plant , material and then modify the material with date ,
Press 'modify button' save into ztest2.
How can i archieve,help me.
Thanks in advance.

Hi kumar,
1. create 2 internal table based on u r ZTABLE. in top include. and define work area also WA.
2. create a screen like 1000 and in screen create a table grid using table wizard and refer u r internal table .
3. create a pushbutton name modify.
4. then in PAI module write following code.
CASE SY-UCOMM.
WHEN 'MODIFY''.
LOOP AT ITAB1.
MOVE-CORRESPONDING ITAB1 TO WA.
INSERT INTO ZTABLE VALUES WA.
COMMIT WORK.
ENDLOOP.
ENDCASE.
i think u get some idea using this code.
regards,
Abhilash

Similar Messages

How to display the status message based on student marks..

Hi all,
i have student table that has columns mark1,mark2,mak3...
i want to display the student name,staus as pass or fail based on the marks.. in a single query..
if the student score above 30 in all the subject i should display the status as pass other wise fail ( note:- status is not a column in the table)
Thanks

select e.student_name
      ,e.mark1
      ,e.mark2
      ,e.mark3
      ,decode(pass.flag,'Y','PASS','FAIL') status
from   exam e
       , (select e2.student_id,'Y' flag
          from   exam e2
          where e2.mark1 > 30
          and    e2.mark2 > 30
          and    e2.mark3 > 30) pass
where e.student_id = pass.student_id (+);
STUDENT_NAME      MARK1      MARK2      MARK3 STATUS
CNAME                40         50         60 PASS
DNAME                60         70         80 PASS
ANAME                20         30         40 FAIL
BNAME                30         40         50 FAIL Edited by: JamesK on May 30, 2013 12:38 PM
Edited by: JamesK on May 30, 2013 12:40 PM

How to display the results in order by based on search value

Hi All,
how to display the results in the below order.
CREATE TABLE TEST( SONGID NUMBER, TITLE   VARCHAR2(200))
INSERT INTO TEST(SONGID,TITLE) VALUES (10,'AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (11,'CICCONE, MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (12,'DALLIN, MADONNA LOUISE/STOCK');
INSERT INTO TEST(SONGID,TITLE) VALUES (13,'MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (14,'MADONNA (A)/ AHMADZAI, MIRWAIS (C)');
INSERT INTO TEST(SONGID,TITLE) VALUES (15,'MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (16,'MIRWAIS AHMADZAI, MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (17,'MIRWAIS (CA)/ MADONNA (CA),AHMADZAI');
INSERT INTO TEST(SONGID,TITLE) VALUES (18,'MADONNA (CA),CICCONE');
SELECT *FROM TEST WHERE INSTR (TITLE, 'MADONNA') > 0
output:
SONGID     TITLE
10     AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)
11     CICCONE, MADONNA (CA)
12     DALLIN, MADONNA LOUISE/STOCK
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
16     MIRWAIS AHMADZAI, MADONNA
17     MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
18     MADONNA (CA),CICCONE
Expected output :
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
18     MADONNA (CA),CICCONE
...if user searches with 'MADONNA' , I have to display the results like title starts with 'MADONNA' first then rest of the records.
Please let me know is it possible to display the results in that order.
Regards,
Rajasekhar

This may be a bit more accurate:
SQL> SELECT *
2 FROM   TEST
3 WHERE INSTR (TITLE, 'MADONNA') > 0
4 ORDER BY INSTR (TITLE, 'MADONNA')
5           ,TITLE
6 ;
              SONGID TITLE
                  13 MADONNA
                  14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
                  15 MADONNA (CA)
                  18 MADONNA (CA),CICCONE
                  12 DALLIN, MADONNA LOUISE/STOCK
                  11 CICCONE, MADONNA (CA)
                  17 MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
                  16 MIRWAIS AHMADZAI, MADONNA
                  10 AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

How to display the JSP output in the same page....

im new to JSP..... can anyone tell me how to display the output of a particular JSP page in the same page itself...... if anyone could send a small sample code it will be very useful for me....
thanks in advance
regds
Krish......

Hi Robert -
When you say you are writing a template-based Renderer, do you mean that you are creating a custom look and feel and replacing the header Renderer? If so, I'd recommend instead simply creating your own template (not template-based Renderer), and reference your template directly from your uiXML pages where you want to insert the timestamp.
You'll probably want to write a method data provider which calls System.currentTime(), convert the result to a date, and then use Java's date formatting capabilities (see java.text.format.DateFormat) to produce a user presentable String that you can return from your data provider.
For more info (and samples) on templates and data binding, see the "Templates and Data Binding" section of the "Includes and Templating in ADF UIX" help topic:
http://tinyurl.com/5b7bf
Andy

How to display the the tablix column lines upto footer in rdlc report

How to display the the column lines upto footer in rdlc report.If data are less it should go upto bottom (footer) based on data.
For Example.I have 2 items.it should display 2 items and lines should continue upto footer.
| S.No| Name | Qty | Active | UNIT | Amount |
| 1 | A | 1 | 4 | 34 | 43 |
| 2 | B | 6 | 3 | 23 | 45 |
| | | | | |
|
| | | | | |
|
| | | | | |
|
| | | | | |
|
Footer
If I have 5 items.it should display 5 items and lines should continue upto footer.
| S.No| Name | Qty | Active | UNIT | Amount |
| 1 | A | 1 | 4 | 34 | 43 |
| 2 | B | 6 | 3 | 23 | 45 |
| 3 | C | | 4 | 47 | 56 |
| 4 | D | 3 | | 56 | 47 |
| 5 | E | 4 | 4 | 45 | 45 |
| | | | | |
|
| | | | | |
|
Footer
like that it should be adjust based on data length.
please help me how to do it in RDLC (asp.net and c#).....
Your help would be highly appreciated!
Thank you very much in advance!

Hi M.S.GopalKrish,
According to your description, it seems that you want to make the tablix rows to fill page size? We can configure the text box height size to work around the issue.
Use this method, we need to calculate the average height size of the text box in the tablix. For more details, please see:
We can use
RowNumber() function to calculate the row number of the tablix.
Calculate the page height size of the tablix in Property windows.
Use the page height size divided by row number. We can get the average height size of the text box.
Hope this helps.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to display the contents of the database values which are retrived.

how to display the contents of the database values which are retrived in servlets and i am able to display the contents in the servlets and if forward to jsp using requestdespatcher,the values are to be shown in jsp one below the other.please suggest me in these........the servlet code is as shown
while(rs.next()){
                    buffer.append(rs.getString(1));
                    buffer.append(rs.getString(2));
                    buffer.append(rs.getString(3));
                    buffer.append(rs.getString(4));
                    buffer.append(rs.getString(5));
                    buffer.append(rs.getString(6));
                    buffer.append(rs.getString(7));
                    buffer.append(rs.getString(8));
                    buffer.append(rs.getString(9));
                    buffer.append(rs.getString(10));
                    request.setAttribute("result1",buffer);
                    RequestDispatcher rq=request.getRequestDispatcher("/results.jsp");
                    rq.forward(request,response);
in jsp iam using the getAttribute to retrieve the values as shown
<% StringBuffer sb=(StringBuffer)request.getAttribute("result1"); %>
<%= sb %>
but getting the results in the stretch,i need to display the result one below the other.

if you load it all into the buffer that is going to be very difficult. I would suggest loading it into some sort of collection. I like using an ArrayList.
Then pass the arraylist.
you will then on the jsp iterate through the arrayList using what every you want.. el, logic tags, scriplets.
so something like
ArrayList arrayList = new ArrayList();
while(rs.next()){
arrayList.append(rs.getString(1));
//or possibly an arrayList of String arrays
//maybe using nested for loops. Inner for loop adds result to string[] then //outer adds string[] to arrayList.
//can be done any number of ways based on your expected result set.

In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS

HI,
   HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?

in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back

How to display the Buyer's signature in PO BI Publisher Report

Hi,
How to display the Buyer's signature dynamically in XMLP Purchase Order Report.
Please anybody help on this.Your help greatly appriciated.

Hi All once again
I was able to display the signature on XMLP AP Check Print Report by went through the follwoing Tim's blog http://blogs.oracle.com/xmlpublisher/2006/04/13#a12
But in Purchase Order report requirement is different. We need to display the Buyer's signature on XMLP PO Report. So, where is the best place to store the buyers signatures.(For example if we have 10 buyers with 10 signatures respectively then after approving the PO, we should display that particular buyer's signature in PO XML Publisher report).We observed that in byuers & User's form there is no attachment feature enabled.
This is an urgent requiremnt. Please help/guide/suggest to resolve this issue.
Thanks in advance.

How to display the fields in ALV Output without using Field catalog?

How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.

Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_grid_title            = 'REPORTING'
            is_layout              = gt_layout
            it_fieldcat             = lt_fieldcat[]
       tables
            t_outtab                = itab.

How to display the proxy settings for a specific group of servers in an OU ?

Hi,
Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
$Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
ForEach ($Computer in $Computers) {
| Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
I've done similar script for some other task but not sure how to do this for Proxy setting.
Thanks.
/* Server Support Specialist */

Proxy settings are not set in Active Directory
The below code works for 2003 servers and Win XP
$colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
-computername $env:computername
foreach ($objItem in $colItems) {
write-host "Caption: " $objItem.Caption
write-host "Description: " $objItem.Description
write-host "Proxy Port Number: " $objItem.ProxyPortNumber
write-host "Proxy Server: " $objItem.ProxyServer
write-host "Server Name: " $objItem.ServerName
write-host "Setting ID: " $objItem.SettingID
write-host
You can try checking the registry values- Works in 2008 + and Windows 7
Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
or use netsh
netsh winhttp show proxy -r <remotemachinename>
Regards Chen V [MCTS SharePoint 2010]

How to display the text as a Bold in the Text Element of a Smart Form

Hi,
I created one Smart Form.
In that i created the Text element.
I provide some data also in that.
It is coming as a MS WORD.
I executed my smart form.
Customer Number: &WA_KNA1-KUNNR&
it display the data of the particular customer.
But i need to display the Customer Number as BOLD or else Increase the Size.
For this also I created one SMARTSTYLE.
In that I created the Paragraph and Character Formats also.
Now i assignee that SMARTSTYLE in the Output Option Tab of the Text Element also.
But i unable to get the CUSTOMER NUMBER in Bold.
In MS WORD we have BOLD button.
I selected the Text and Press the BOLD button. At that time it is Highlighted.
Whenever i press the SAVE Button.
Then it is not saved with BOLD.
It is coming in Normal Format.
In the ECC 6.0. I am unable to get the Text as a BOLD.
This text Element is like a MS WORD.
Can you please tell me how to display the Data with BOLD. please tell me. I am unable to get that one.
Thank You.
Regards,
B. Krishna.

Hi,
Check where u have given BOLD. In character Format or in Paragraph format.
In SMART FORM,
1. Change to OLD EDITOR if u are confused with the new one.
        (This can be done by clicking the button left to new editor ).
2. If it is PARAGRAPH FORMAT,
           Give the name of paragraph format in the editor.
            P1         &WA_KNA1-KUNNR&
    If it is CHARACTER FORMAT,
                         <C1> &WA_KNA1-KUNNR&
Thanks,
Nithya.

How to display the o/p based on i/p in mpp

Similar Messages

Maybe you are looking for