How to do a time normalization on my data?

I am trying to "time normalize" my data.Labview offers a way to normalize(ie.the amplitude).But how do I time normalize?
To explain more:We have different kinds of movement(several movements inside one data file) starting and ending at different times-we would like to time normalize the data, so that each individual movement starts and ends at the same time-so we can compare it for our analysis.
Thanks,
Sujani.

Well let me say that I appreciate the life you spare to help us!
And judging by the following post, the "father of LV" appreciates it enough to thank you publicly!
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000B7D70000&USEARCHCONTEXT_CATEGORY_0=_49_%24_6_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
If you click on his link, it looks like he registered on the Dev-Exchange just to acknowledge you.
Dennis, you have now accomplished the super-human twice over!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How to calculate the Time difference between 2 dates

HI All,
I am using HR_hk_diff_btw_2_dates to calculate the employee service dates.
For that i am inputing his hire date and Term dates and Output format as '05' i am getting output perfectly....
But problem is whe i am inputting the employee hire date is Dec 1 2007 and Term date is
March 31 2009 It is coming as 1 year 3 months 31 days instead of 1 year 4 months directly .......How could we make it make last date also working day and get the O/p as 1 year 4 months ?Please Advice..
Regard
sas

1. FM for difference betwwen two times:SCOV_TIME_DIFF
Import parameters               Value
IM_DATE1                        2008-01-01
IM_DATE2                        2008-01-01
IM_TIME1                        10:00:00
IM_TIME2                        11:30:00
Export parameters               Value
EX_DAYS                         0
EX_TIME                         01:30:00
2. SD_CALC_DURATION_FROM_DATETIME : Finds the difference between two date/time and report the difference in hours
L_MC_TIME_DIFFERENCE : Finds the time difference between two date/time

How to Convert a 'Time Stamp' field to Date......?

Hello Gurus:
I am using a Generic Extractor to pull some stats data. One of the field is a Time Stamp field, which tells me the date and time of Transaction run. I only need "Date". I tried mapping the stamp field to Date info-object hoping for a automatic determination of the Date.... (like the Week, Month happens). Well, I was wrong!
I only need the Date part. How can I do this in BI? is teher a specific SAP info-object for this that could be used..? If not, what would be the routine. The Date field that comes in is a SAP format... "u201C20,070,505.0000000u201D meaning the Transaction was run
on 05/05/2007. How can I get this convertion in BI transaformation?? is there a special Routine...?
Also, we are trying to use "Time Stamp" based DELTA from a generic extraction. The field used is a System date with time stamp. Value looks like u201C20100,505,170,113.2918470u201D, u201C20100,505,170,113.4748820u201D Every record pulled has a different value... probably giving me the time at which the record was created or generated. Now, with DELTA specifid on this type of field, what will be the 'Current Status" value in Delta queue? Is it based on the last record created and will that be the highest value? For next Delta extraction, does it compare the extraction time stamp to this value and bring in those records that are greater than the 'Current Status" value? I guess with that we can have as many deltas as we want..... right?? is there any particular setting I should be doing or worried/ careful about setting etc....?
Thanks for the response in advance....
Best..... SMaa

Thanks Akshay,
Your suggestion worked right away and was probably the easiest of all. I tried the Function Module that Pravender suggested,
but it did not return me the date back.... may be because it does not need the Micro Seconds in it....? Routine as suggested by
Satyam might work too, but did not go there....!
Thanks to all of you.
Best..... SMaa

How to display the time stamp in a data log table

Hello,
I want to display data during the data acquisition process. How do I add the time stamp as one of the column in the 'Result Table' located at bottom left of the example code?
Thanks,
Ryan
Solved!
Go to Solution.
Attachments:
Cycle Analysis.vi ‏229 KB

I inserted the portion you added to my program and it worked but not exactly the way I want. It added the time and date when I start the data acquision. But I want the time stamp to be shown on every single row. Please see attached image.Thanks.
Attachments:
Result.JPG ‏54 KB

How to repair the Time Capsule without losing data?

Hi everyone,
I am from Vietnam. My 2TB Time Capsule is not working anymore. The LED light is not lit. Brought it for warranty claim. Apple reseller in my country agree to replace a new one for me. But the problem is I will lose all the data. I believe it's HDD still good. But they can't help me to get data. Please advise where can repair the Time capsule in which they can retain the data for me.

Before you do this be sure and let Apple know that is what you are doing so it will not void the warranty on your Time Capsule.
That will void the warranty. Generally Apple will not allow you to recover data.
The TC is basically a backup target for TM.. this is not considered valuable in and of itself. You simply buy the new TC and make a new clean backup.
If you put data on the TC, it is without any means to backup itself and nor can TM backup data on network drives.. so you are stuck. And that is why we do not recommend TC usage as a NAS.
See if the reseller is strict about the policy.. some will be prepared to help you out.
The hard disk has to be removed from the TC.. which is a sealed unit. The hard disk can then be put in a USB holder and the material on the drive copied to the new TC, or any external or network drive.
There is absolutely no way without removing the drive in a dead TC.

How to set the time difference between each data when sweeping voltage using keithley 2400

Hello friends,
I am using the sweep vi from Keithley in the SWEEP and Acquire measurement vi.I want to measure the voltage for every step and insert a delay in between every two data, so I need some delay between each I step.
I am a starter to use Labview, thanks so much for your answers.
Perry
Solved!
Go to Solution.
Attachments:
Keithley 24XX Sweep and Acquire Measurements.vi ‏26 KB

As Dennis said, if you're using the built-in sweep function, you'll have to check the manual. See Section 10-16 (That's section 10 page 16, not sections 10 though 16) of the Keithley 2400 User Manual.
The Keithley 24xx series has a measurement speed in units called PLC (Power Line Cycles). The default speed is 1PLC, meaning a measurement is taken every 1 power line cycle, or 1/60th of a second (16.67ms). 24XX's can go from 0.01 PLC (every 0.16ms) to 10 PLC (every 166.6ms). The faster you measure, the lower precision you get.
To set this value programmatically, the command is
ENSe:CURRent:NPLCycles <n>
ENSe:VOLTage:NPLCycles <n>
depending on what you're sensing and where <n> is the number of PLCs from 0.01 to 10.
Another factor that will determine the time between data points is the SDM cycle. These are more complicated, look at your Keithley user manual for more information. Look at Section 6 and Section 11 for more info.
Note:
PLC times are based on a US cycle of 60Hz.

How do I tell time machine to put data back on the disk?

xx

see "restoring data" under "learn more" near middle of page:
http://support.apple.com/kb/HT1427

Replace numbers and invert time normalizations

Good morning everyone,
I am using LabVIEW for CAD/CAM purposes, and the aim of my program is to control a trajectory along several consecutive straight lines defined by its corner points (x and y coordinates).
My program uses only mathematical equations (parametric equations) and I am using a simulate signal (time normalization) between 0 and 1. To perform the straight lines my idea is to replace the position of the points and, at the same time, invert the time (from 0 to 1 to 1 to 0) - please see the attached image - and so on.
Because I am a new Labview user, I would like to know it this point replacement is in fact possible, and also how to invert the time normalization.
Hope to have been the clearest as possible.
Thanks you very much in advance.
Attachments:
2015-04-27 11.09.37.jpg ‏1832 KB

Cheers,
The inversion of the variable t (time) is made with the purpose of having a continuous time signal and also to allow us to replace only one of the two points when a segment is finished.
Thus, I need to know how to invert these variable, and also how to replace the points, "automatically", in the block diagram window. I suppose that some loops will have to be used.
Although this is a mathematical problem, my inexperience using Labview makes me wonder how to perform such an apprach.
Perhaps, the attached note can help you understand to understand what I exactly would like to do in Labview.
Thank you very much,
Francisco
Attachments:
Note.pdf ‏234 KB

Change Time Constraint for Personal Data InfoType

Hi,
How to change the Time Constraint for Personal Data InfoType.
I tried to do it in Customisation Procedure --> Infotypes, but the option to change Time Constraint is disabled for Infotype 0002.
Thanks

Hi,
you can change time constraints in general attributes of infotype attributes,this can be done through table maintenace view V_T582A.
But note that we cannot change the time contraints for mandatory infotyepe of personnel in an organization i.e -0000,0001,0002.
ex:- without personal details like names no personnel will exist in an organization.
regards,
Soori

Use Time Machine for transferring data to new drive

2008 pre-unibody 17" 250GB MacBook Pro4,1 - 2GB RAM, 10.6.8, 2.5ghz
How can I use Time Machine to transfer data to hybrid 1TB Seagate SSD?

Hi V.K., was just reading your instructions for jumper25 about transferring all info to a new HD and had a question. I am in the same situation where i have bought a new 320Gb to replace the OEM 120Gb in my MBP. Everything is very straight forward from what you have posted but i only have the original Tiger 10.4.9 install DVD and I am running Leopard 10.5.5. Will I be able to use my Tiger install disk and then use my TM back up even though it Leopard? Or will I need a Leopard install disk to complete? Also is there another way around this problem if i can not use the Tiger disk such as mirroring the 120Gb disk on to my 320Gb?
Thanks in advance for your time and expertise.
P.

How to print system-time in XML?

Hi,
Please help me how to print system-time in XML. Like we use sy-uzeit in ABAP.
Can we use anything in XML too..
Thanks & Regards,
Sai

hi movilogo
Please try this.
Create hidden item P1_DATE
Create On load process in page 1 and put this code
begin
:P1_DATE:=TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MM:SS');
end;
Open your region in Page 1 put this code in Footer area
*&P1_DATE.*
Refresh your page.
you will get the output like this.
16-SEP-2009 11:09:17
thanks
Mark Wyatt

How to populate the time component of a cube?

We have a question regarding how to populate the time component of a cube. Let me explain:
We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for every dimension (e.g., "customer" and "customer_id" for the "customer" dimension).
We understand that, in this case, "customer_id" stands for the dimension business key, so we create an arrow from the business key in the source table to the "customer_id" column in the cube operator.
So far so good. The mapping works all right, and the cube is loaded correctly.
Now we need to do the same for the time dimension. We have already created the time dimension and we have loaded it. We have also included it in the cube, so now we have two new columns in it: "time_day_code" and "time", both NUMBER data type.
We have the "sale_date" column (DATE data type), in the source system and, of course, now we want to populate the date column in the cube. We suppose that, somehow, we have to translate the "sale_date" field into the numeric column of the surrogate key of the time dimension. How should do we do this? I suppose that OWB must do the translation for us, just as it does for the other dimensions, but how? We have been looking into the manuals, and we have found no explanation on how to go about this.
Any help would be appreciated.
Best regards
Juan Algaba

Hi Juan
You are right this should have been in the manuals, checked and there is only a brief mention (Using a Time Dimension in a Cube Mapping section)
The identifier format should have been documented for each level and will involve creating the formatted attribute for input to the cube operator's time dimension reference attribute.
The time dimension business keys are stored as follows;
Day Level - YYYYMMDD
Month Level - YYYYMM
Week Level - YYYYWW
Quarter - YYYYQ
Year - YYYY
If you have a source that has a SQL date datatype for example and want to construct the key for a cube's time dimension at the day level something like the following expression can be used to construct the time reference from a SQL date...
to_number(to_char( time_key, 'YYYYMMDD'))
The result of this expression can be used as input to the cube's time dimension attribute.
Cheers
David

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help, thanks.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks

Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

How do i reset time and date on my itouch

how do I reset time and date on my itouch?

Go to Settings>General>International and make sure that Calendar is set to Gregorian.
Bext
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How to share 1 time capsule to 2 macbooks air, using Time Machine?

How to share 1 time capsule to 2 macbooks air, using time machine??

You don't need to do anything.. both computers can use the TC and will create separate backups. It is simply designed to work with Time Machine.

How to do a time normalization on my data?

Similar Messages

Maybe you are looking for