How to do IDOC debugging for both inbound and outbound

Hi
can somebody please help me on how to debug the idoc both inbound and outbound in SAP PI.
Regards
Blue

Hi,
Yes, i have checked but did not get any satisfactory answer.
here is the solution:
Inbound:
We19, Give the idoc #,
click on the inbound functional module and select the radio button in the fore ground
check the check box call in debug mode, this will enter in the functional module debugging.
Outbound:
Check BD73, give the idoc # and execute
or
RSNASTED program and set the breakpoint there
is this correct, i have not tested/ checked yet.
Regards
Blue

Similar Messages

Creating and Setting up web services for both inbound and outbound comms

Hi
I would like to know the process of setting up inbound and outbound web services using Siebel - is there a tech note /bookshelf article that can guide me through to setting up a 'new/custom' web service.
I have read up on bookshelf that both business services and workflows can be setup/exposed as web services. Now i would like to find out how to do this.
Any help appreciated.
Regards,
TS

As you begin to experiment with web services you should take a look at SoapUI. It is a freeware program that makes it a breeze to test both inbound an outbound web service calls. The bonus is that it can also be used to trace what HTTP is going back and forth along with giving you the ability to chain calls together. That is particularly useful for example if you are learning how to do web service calls within the context of a session. http://www.soapui.com/

How to do debugging for sending inbound or outbound email via ERMS?

Hi Colleagues,
I send an email to '[email protected]' with email titile 'CIM: 318238 2013', and want to display inbound email in email assignment block within CIM Service Request 10001503 in ICX. But it fails to be displayed on Web UI. And there is no problem to browse inbound and outbound emails via t-code SCOT as below.
If I send an email to '[email protected]', there is no problem to display inbound email within one CIM Service Request in ICP as below.
One related class ZSCL_CRM_ERMS_AH_CIM_CSS=>IF_CRM_ERMS_SERVICE~EXECUTE is used to implement this function, I don't know how to do debugging when sending inbound or outbound email? Could please tell me more detailed steps?
Kind Regards
Andie

Hi Fabian,
Thanks for your reply.
How can I add this method ZSCL_CRM_ERMS_AH_CIM_CSS=>IF_CRM_ERMS_SERVICE~EXECUTE to the list in t-code SM50 for doing debugging?
And another question is that I cannot attach inbound email to CIM Request via ICX email address '[email protected]', but no problem to send inbound email using ICP email address [email protected] as below. Is there any authorization issue for this case?
Kind Regards
Andie

How to install Laserjet M1217 for both wireless and network

How to install an HP Laserjet Pro M1217nfw MFP on an XP system for both network and wireless capabilities?

Hi,
Are you talking about a mixture of wired and wireless ? If yes, please check your existing hardware and use the following manual to select one connection type then post back if having any porblem during the setup:
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

JCA for JDE-XE - Looking for more inbound and outbound service examples

Where can I find more examples using JCA for JDE-XE inbound and outbound service / events.
Edited by: Channu on Sep 23, 2011 1:37 AM
Edited by: Channu on Sep 23, 2011 1:37 AM

Hi Ralf,
Yes, if you put a deny http, it would drop all packets for destination as http port, but be mindful that when you apply an access-list on your inside interface, it automatically activates the deny ip any any right at the bottom, you would be able to see that in the ASDM. So for the users that need be allowed access to the http, needs to be explicitly allowed http access, so your correct configuration would be:
access-list inside_access_in deny tcp host 192.168.1.1 255.255.255.255 any eq http
access-list inside_access_in permit tcp any any
access-group inside_access_in interface inside
This would block 192.168.1.1 to go to internet, but allow all others.
Second question, i haven't chceked the ASDM, but just remember out of memory, that this service option should be the protocol, whether ip,tcp,udp,esp or gre etc.
Moreover always try to block connections as closed to the source as possible, this would mean, if you want to filter traffic going from inside to outside, that should be done on the inside interface not outside.
Thanks,
Varun Rao
Security Team,
Cisco TAC

How to Design a Page for Both Insertion and Updation

Hi,
I have Page where I need to populate a table from Standard PO/AP table and once the save is clicked on the table,
the data shoudl be inserted in custoim table.
Ex: Ui table wil have 3 columns and say 5 rows
- PO#
- Line#
- Amount for 'X' purpose
where PO# and Invoice# is populated and Amount is empty
User will enter value in Amount column in all 5 rows and click on Save button.
Now these 5 rows with 3 columns should be inserted into the custom table (PO#, Line# and Amount)
How Can I design Model Objects for such a requirement?
Thanks,
Kamath

You should create an EO on your custom table and a VO on your EO. As you insert records in the VO, corresponding rows are created as EO rows and when you commit (getOADBTransaction().commit()) in the AM everything would get committed to the DB.
As far as subject goes of having a common page, everytime you can execute the VO with the bind parameters and check whether a row exists. If it does exist then update the VO Row (I expect the master record to be unique row). Otherwise create a new Row for the master and then correspondingly for the details row.
Do let me know in case you need additional information.
Regards
Sumit

How to use form design for both online and Offline Scenrio!

Hi All,
I have created the forms using WebDynpro context with ZCI layout for Online scenario.
There are some fields which need to be prefilled and are read only.. Header fields.
There is no interface structures created seperately but the interface is constructed through webdynpro context.
Now that I have to use the same for offline scenario, I don't see layout in SFP of form. I can create a structure for Importing fields but there is no Layout for mapping?
Do I need create seperate forms for this as I have some prefilled hedaer fields which I can't pass using download beacause there is no context design available for this?
Regards,
Srinivas

you could either create a separate form for your offline form using Data Dictionary interface or use the Data Dictionary interface for both of your forms.
You do have the option of creating your own XML file for your offline form - you may be able to copy the XML code out of your online interface, save it to a file and use that for your offline interface - i'm not 100% sure on this as I've never done that.

MM06E001 User exits for EDI inbound and outbound purchasing documents

Hi
I am using enhancement MM06E001 to transfer PO data
via idoc type      ORDERS05.
I am creating PO via transaction ME21N.When ever i save the PO the data should go via this IDOC type
When we create PO the Standard long text data maintained at header level is tranferred via Segment E1EDKT1 and E1EDKT2.
The issue is that at header level i have created new PO header text.
This new PO header text data is not identified in this enhancement
thats why i am not able to send this data via
idoc using enhancement MM06E001.
Kindly help me on how to pass the text data using Idoc
via enhancement MM06E001.
Thanks & Regards,
Chetan

Hello,
         I believe you are writing the Code in the Exit EXIT_SAPLEINM_002 in which you are manually populating the Header Text while it is not required for the Standard Segments like E1EDKT1 & E1EDKT2. If there is any Text maintained in the PO, it will be automatically populated in the Header Segment E1EDKT1 & E1EDKT2.
        Put a Break Point in this Customer Function and check if the Data is already being filled into these Segments in the Table INT_EDIDD.
Thanks and Regards,
Venkat Phani Prasad Konduri

External mail routing not working both inbound and outbound

Hello there,
I installed AD 2008 R2 including the Exchange 2010 in my lab. I also use the DNS on the same server. I am able to send emails internally via OWA with other users, but I cannot send email externally nor receive one. When I tried to send email from my external
account it says no MX or A record, but when I use the nslookup tool it finds the mx record. I have my send connectors ok and also I created accepted domain. the smtp domain I am using is corp.contoso.net. I am new to Exchange and configuring mail routing.
I am sure I probably just mis-configured the server. I also use the mxtool and of course it did say no mx or A record exists. Any ideas that you can toss around is greatly appreciated please.
thanks
Lotusmail1
Franz Garcia

Do you have A record and MX record created in your external DNS?
Without MX record you won't be able to receive external emails.
Make sure "Anonymous Users" ticked in the default receive connector properties.
Check this
If send connector created please make sure it has internet and tick "use the external dns lookup settings on the transport server" and add external DNS IP in your transport server properties using this command .
Set-TransportServer Hub01 -ExternalDNSAdapterEnabled $false -ExternalDNSServers {192.168.1.1, 192.168.1.2}
Check this for details
MAS

Can we define users for both studio and integrator server

Can someone please let me know how can we define users for both studio and integrator server so that the user can be used to view UI page but not modify it.I want to define user in studio which will access the Page but not modify it. And the user in integrator server should be able to view scheduled jobs.
Thanks a lot.
Regards,
Amrit

Amrit,
Both Studio and Integrator Server support LDAP. See http://docs.oracle.com/cd/E35976_01/studio.240/eid_studio_users/toc.htm#Integrating%20with%20an%20LDAP%20System%20to%20Manage%20Users for details about implementing LDAP in Studio. For Integrator Server, see "LDAP Authentication", p. 38 (document pagination; p. 44 pdf file pagination) in the Integrator Server Guide (http://docs.oracle.com/cd/E35976_01/integrator.240/DataIntegratorServer.pdf).
RLJII

Puprose of inbound and outbound idocs

plz help me
what is inbound and outbound idoc ? its purpose
inbound and outbound idoc steps
thnaks

Hi Mahesh,
Please check this link
what is the need of ALE/ IDOC
what is idoc.
IDOC creation
inbound idoc creation
Best regards,
raam

Single Function module to create inbound and outbound delivery

Dear Frens,
   I would like to know how VL10A is creating a deliverty document in background mode.
   otherwise can anyone help me with a single function module or BAPI or BADI which creates both
   inbound and outbound delivery.
Regards
Priya

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

SAP inbound and outbound delivey in single shipment document

Hi
We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO 2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
Please advice ow this can be achieved in SAP.
Best Regards
Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AM

It is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM

When To Use Inbound and Outbound Interfaces?

I use an Inbound message type when i am receiving some data and outbound message type when i push data out of the XI box??Is this correct..
And how to decide when to use a Inbound and Outbound Interface?

Hi Barik,
<b>I use an Inbound message type when i am receiving some data and outbound message type when i push data out of the XI box??Is this correct..</b>
WRONG!!!
outbound message->XI->Inbound message...
(sender system)->XI->(reciever system)
remeber: when u r sending some data to XI u send it using outbound interface.
and when u r sending some data from Xi to other system u use inbound interface...
Hope ur doubt is clear!!
regards
BILL
Use a Good Subject Line, One Question Per Posting - Award Points

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

How to do IDOC debugging for both inbound and outbound

Similar Messages

Maybe you are looking for