How to do to add a specific BAPI WBS Check betteen 2 systems  via ALE

I am on the module TRAVEL MANAGEMENT (FI-TV) into the sap system DTM version ECC5 (for expenses). I wish communicate with the SAP system R/3 DGI version 4.6C via ALE and BAPI.
When I create the expense in DTM, I put a WBS and I want to do severals checks via ALE into the system DGI.
I have implemented the note 516109 into DGI to instal the bapi "BAPI_PROJECT_EXISTENCECHECK".But the link doesn't work from DTM to DGI.
Please could you help me ?
Other point : How to do to add a specific Bapi to check
WBS? I didn't found USER EXIT.
Thank in advance.
Odile Dougnac

Did you set your distribution model correctly ?
You need to add this BAPI in ALE distribution model between your two systems.
You need also to create one defaut destination for the remote logical system (this is done in SALE) because the BAPI uses RFC destination, not IDOCs

Similar Messages

  • How to call a method by specific IP address(if the system has 2 IP address)

    Hi All,
    In my project I have two N220 systems, which has two IP addresses each. Server has the following IP addresses
    172.31.128.93 This IP address connected thorugh HUB
    3.3.3.1 This IP address connected through Crossover cable
    Client has the following IP addresses
    172.31.128.94 This IP address connected thorugh HUB
    3.3.3.2 This IP address connected through Crossover cable
    In server system I bind the RMI registry in the following way
    Naming.rebind ("rmi://3.3.3.1/HeartBeat", this);
    And in Client system I lookup in the following way
    Naming.lookup("rmi://3.3.3.1:1099/HeartBeat");
    Now the problem is, the method in RMI server is not called through Crossover link it is happening through TCP/IP link. Is there any way to call the method by only using Crossover link?
    Please help me with this issue...
    Thanks in advance.

    Hi all,
    In solaris 220 machine i am facing the following problem While executing lookup method.
    If the crossover cable is properly connected lookup method is working fine.
    If the crossover cable is unplugged, lookup method is waiting indefinitely until the cable is plugged in. (Lookup method is not throwing any exception )
    Is there any way to avoid this ?
    Please help me with this issue..
    Thanks in advance...
    Message was edited by:
    rmi_rajkumar

  • HT201250 Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How

    Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How ?

    Time Machine is capable of backing up to multiple locations, and can be used to back up to both a local hard drive and a networked drive (provided that that drive is in or connected to a Time Capsule or another Mac that is sharing it over the network). The catch, though, is that you can't specify different things to back up to different destinations. Whatever you exclude from Time Machine backups is excluded from ALL backups, and whatever is included is included on all.
    So, get a large enough drive that you can back up everything you want in all locations, or use something else for maintaining the network backup.
    More information on these topics can be found here:
    How do I set up Time Machine to a shared drive on another Mac?
    How do I set up Time Machine to a Time Capsule or Airport Extreme?
    "Rotating" Time Machine backup disks

  • How to add a specific order type into any particular report

    Hi All,
    How to add a specific document type(order type) into any particular report in order to review OTD performance.
    I need to add one specific order type to existing reports which will help to check the performance of the delivery type for that particular order type to the users.
    Thanks,
    Raj

    Hi Rajesh,
    thanks for the reply when i tried as the way you said.. but the system is asking more details like varient. so if you can clearly specify the process for order type (VOV8-- table TVAK) so it will helpful for me.
    Thanks
    Raj

  • How to add a specific view to a folder in Finder?

    Hello Everyone,
    I was wondering if there is a possibillity to add a specific view to a specific folder in Finder.
    I know this sounds abstract, let me explain:
    In OS 10.5 there are now 4 views for the Finder:
    - Icons
    - List
    - Columns
    - Cover Flow
    Usually I prefer icons, but for my movies and pictures folders I prefer Cover Flow.
    It would be handy to preset Cover Flow as view for the movies and pictures folders while other folders remain unaffected and still view as icons, instead of constantly having to change the view.
    Is there any way to accomplish what I am trying to do?
    Thanks Beforehands

    Lawrence,
    What you want to do is possible.
    Open your folder (the one you want to "customize"), then choose View>Show View Options. At the top, you will see a check-box labeled "Always open in xxx view," "xxx' being whatever view is currently set for the open window. Change the view on the window, using the icon in the Toolbar, to set your desired view, then enable the checkbox in the View Options. Close the View Options, then close the window.
    Initially, changing the view on this one window will change your view globally. Not a problem; just change the global setting back to your desired view when you open the next Finder window.
    Scott

  • How can I share a project specific calendar I created on Entourage 2008 ?

    How can I share a project specific calendar I created on Entourage 2008 without showing my personal calendar? I created a project specific calendar using Entourage 2008 for Mac. I want to add someone that uses Outlook from a PC. We are in the same exchange network.  I have added this person in under the sharing tab, but don't see a way to invite her to view it, and it does not appear on her Outlook list of shared calendars. I was able to invite her to view my main calendar, but not the project specific one. Any suggestions?

    http://www.microsoft.com/mac/support

  • How do I call on a specific child in a container

    I am loaded images into a container that is being displayed on a map.  I've created a string of my images names and am looping a loader to load each image and add them to the container.
    var overlays=["compsmall.png","compsmall3.png","compsmall3.png","compsmall4.png"]
    var overlay_container:MovieClip= new MovieClip();
    function calloverlays():void
    for (var i:Number = 0; i < overlays.length; i++)
    var overlay_url = overlays[i];
    var overlay_loader = new Loader();
    overlay_loader.load(new URLRequest(overlay_url));
    overlay_loader.contentLoaderInfo.addEventListener(Event.COMPLETE, overlayLoaded);
    function overlayLoaded(e:Event):void
    var my_overlay:Loader = Loader(e.target.loader);
    overlay_container.addChild(my_overlay);
    Once all of my images are loaded into the container overaly_container how can I call on a specific child of the container?  For example how can I call on compsmall2.png once its been loaded into overlay_container?
    I place these images onto a map by placing the whole container at the correct location.  I then turn layers on/off by adding and removing the children within the container.  This is why I'd like to specify a specific object in the parent.
    Thanks in advance,
    j

    Well, there are better ways given how you're loading - nesting functions is generally frowned upon... but this should get you started anyway. This is a little function that you could use to hide one of your loaded images:
    function hideLayer(image:String){
        var c:int = overlay_container.numChildren;
        for(var i:int = 0; i < c; i++){
            if(Loader(overlay_container.getChildAt(i)).contentLoaderInfo.url.indexOf(image) != -1){
                overlay_container.getChildAt(i).visible = false;
                break;
    and then use like: hideLayer("compsmall2.png");
    But like I said, there are better ways. But you'd need to restructure your code - get rid of the nested functions, and the loop... then load each image one at a time. Then you know the index in the array of the image being loaded and can match that with the index inside the container...

  • How to printing oracle report by specific printer name  on solaris?

    When running reports
    -http://host/reports/rwservlet?destype=PRINTER&desname=printername&desformat=dflt.prt&report=test.rdf&userid=test/test@TEST&MODE=CHARACTER
    report with destype=printer desname=printername, the report fails with REP-50159 Executed successfully but there were some errors when distribute the output
    if set default printer by add PRINTER=printername export PRINTER; in uiprint.txt
    it can print to printer.
    i found document id 394554.1 in metalink but it can't fix problem.
    https://metalink.oracle.com/metalink/plsql/f?p=130:14:342229662272785964::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,394554.1,1,1,1,helvetica
    To fix the problem, execute the following steps:
    1. Take a backup of opmn.xml
    2. Edit opmn.xml and include the path information of the new printer:
    For In-process report server add the path information within <OC4J_BI_Forms>
    Eg:
    <process-type id="OC4J_BI_Forms" module-id="OC4J">
    <environment>
    <variable id="DISPLAY" value="localhost:0"/>
    <variable id="LD_LIBRARY_PATH"
    value="D:\Oracle\product\FRHome_1\lib32:D:\Oracle\product\FRHome_1\lib"/>
    <variable id="PATH" value="//printserver;D:/Oracle/product/FRHome_1/bin;................./>
    </environment>
    Here //printserver is the network drive where is printer is installed.
    For standalone report server add the path information within <reportservername>
    Eg:
    <ias-component id="standalonerepsvr01" status="enabled" id-matching="false">
    <process-type id="ReportsServer" module-id="ReportsServices">
    <process-set id="standalonerepsvr01" restart-on-death="true" numprocs="1">
    <environment>
    <variable id="DISPLAY" value="localhost:0"/>
    <variable id="LD_LIBRARY_PATH"
    value="D:\Oracle\product\FRHome_1\lib32:D:\Oracle\product\FRHome_1\lib"/>
    <variable id="PATH" value="//printserver;D:/Oracle/product/FRHome_1/bin;........../>
    </environment>
    3. Reload opmn : opmnctl reload
    4. Restart opmn: opmnctl stopall , opmnctl startall
    5. Run the report with destype=printer and desname=newprintername
    my config (solaris)
    oracle application server release 2 (10.1.2.0.2)
    i used axis printserver name is SZ_R02.
    <process-type id="OC4J_BI_Forms" module-id="OC4J">
    <environment>
    <variable id="DISPLAY" value="localhost:0"/>
    <variable id="LD_LIBRARY_PATH_64" value="/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparcv9"/>
    <variable id="LD_LIBRARY_PATH" value="/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparc"/>
                        <variable id="PATH" value="/SZ_R02:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparc"/>
    </environment>
    how to print to printer by specific printer name?
    thank you very much
    khun

    if submit url with parameter
    http://hostname:7778/reports/rwservlet?destype=PRINTER&desname=lpSZ_R02_2&report=sticker.out
    error
    REP-50159: Executed successfully but there were some errors when distribute the output
    How to Solution?

  • How do I bookmark to a specific page in a another document

    How do I bookmark to a specific page in another document

    When you add a bookmark, it defaults to the current page and view (zoom, scroll). If you want it to link to a location in a different document, after you create the bookmark, select it, right-click, and select Properties and then select the Actions tab. Delete the default action and add a new one of the type "Go to a page view". When you're prompted with the "Create Go to View" dialog, open the other document and go to the page and set the view (zoom, scroll) that you want, and then click the "Set Link" button. When distributing the files, make sure they retain the same folder structure. This is easiest done if all of the PDFs are in the same folder.

  • How to autoupdate firefox from a specific share folder insted of going directly to FF website

    How to autoupdate firefox from a specific share folder insted of going directly to FF website

    You can ''auto-update'' Mozilla Firefox from '''Menu button''' > '''Help''' > '''About Firefox'''.
    There,Firefox will download a package with the '''latest version'''.After downloading you must '''Restart''' the browser to configure the installation.
    Some of '''Add-ons''' can be ''incompatible'' with the '''latest version''' of Firefox if these aren't '''updated''' or '''recent updated'''.

  • How to ID specific printer drivers installed with system?

    Good evening.
    How can I find out what specific printer drivers are installed with my current OS 10.4.11 software?
    It has been updated by the "software update" route since original install by Apple at factory.
    I would like to use my old but bulletproof Epson Color Stylus 600 printer. The Apple support site says that support should be there.
    Thanks for your time.

    Just add the printer. If you did not install printer drivers you can do so from the Optional Installer on the Tiger DVD.

  • HT1711 With the new version of iTunes, how do I manually add or remove music to my iPhone? I don't see my playlist anymore on the left...

    With the new version of iTunes, how do I manually add or remove music to my iPhone? I don't see my playlist anymore on the left...

    App asserts I must have iTunes ver. 9.1 or later.
    Where are you seeing this?
    The app is not telling you that you need 9.1 on your iPad.
    It does not use iTunes on the iPad for anything.
    I'm trying to figure the version on my iPad.
    It is the version that comes with your specific iOS firmware version.
    But again, it is irrelevant to the app.
    If you just got the iPad, it (the iPad) requires iTunes 10.4 on your computer.

  • How to change or add new ext for video?, How to change or add new ext for video?

    How to change or add new extensions for video player???

    Hi,
    Please try to  use Explicit Commit work to save the changes.
    check if there in any BAPI FM related to this.
    Please check the structure you have passed for these fields.
    check the Item category for BOM items - POSTP in table T418. if the entry exists then try to add the values again.
    Thanks & Regards,
    Chandralekha.

  • If I can always use a passcode instead of Touch ID, how does Touch ID add security?

    Am I missing something?  Even if I have Touch ID enabled, I can always use my passcode instead of Touch ID.  So, how does Touch ID *ADD* security?
    I can understand always requiring passcode IN ADDITION to Touch ID at particularly sensitive moments (e.g. changing security), but by allwoing passcode to bypass Touch ID, it seems to me that Touch ID adds convenience but not security.
    What am I missing?

    harolde1 wrote:
    Does anyone know if Apple (or any of the iPhone vendors, such as Verizon, whom I have used) has claimed that Touch ID ADDS security? If so, can someone explain to me why this is not mis-represenation?  I don't mean to be inflammatory, but the dictionary definition of misrepresentation is "the action or offence of giving a false or misleading account of the nature of something" (from Google).
    This is a user-to-user technical support forum. Answering questions about what companies have or have not said and the legality of those statements is way outside the purview of this forum. Additionally, speculating on Apple's policies is specifically a violation of the Terms of Use of this forum.
    However, I think the first paragraph of this overview from Apple gives a good idea of way "convenience" is nothing to belittle. If it encourages people to use passwords who would not otherwise do so, those people's phones are certainly more secure.
    http://support.apple.com/kb/ht5949
    Best of luck.

  • How can i open period for specific user in OB52.

    Hi Expert,
    How can i open period for specific user in OB52.  As 'Authorisation Group' field is there in OB52, how can i use this field to restrict the specific user to post for particular period.  How can i creat authorisation group and where can i assign it to the particular user...
    Please let me know?
    Thanks and regards,
    Sam.

    Hi,
    Here is the detailed process as outlined in SAP help.
    Procedure
    If only a limited set of users is to be able to post in a particular posting period, proceed as follows:
    Add the posting period authorization (authorization object F_BKPF_BUP) to the authorizations of the selected users. Assign an authorization group (e.g. '0001').
    Enter the account type '+' for the posting period variant to which the restriction is to apply. Enter the period(s) whose use is to be restricted in the first period, those which are available to all users in the second period, and the authorization group (e.g. '0001') in the last column.
    Examples
    A posting period can be successively restricted. If, e.g. 10 users have the posting period authorization with authorization group '0001', and 3 of these 10 users also with authorization group '0002'.
    If the period is only to be accessible to the 10 selected users the authorization group '0001' is entered in the posting period variant. Access can later be restricted to the remaining 3 users by entering '0002'.
    Thanks
    Venkata Ganesh Perumalla

Maybe you are looking for