How to execute report RLBEST00
Hi All,
Can anyone please help me to execute the standard report RLBEST00. It is very urgent....
Thanks in advance.
Regards,
Akanksha
Dear Akansha,
Go to T-Code SE38. In the program type in RLBEST00. Press F8. This will ask for certain detials.Fill in the details and again press F8.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
Similar Messages
-
Kindly send anybody a ppt on how to execute reports through Browser and Ana
Hi all,
I need a PPT on how to execute reports through Browser and Analyzer in version 3.5 or older to 3.5 immediatley from end user point of view. I donot have time to prepare it and has to be sumbmitted before end of the day.
Kindly help me out by sending it [email protected] .
Thanks in Advance.
Anil Kumar Sharma .PThank you Mr. Voodi,
I will wait for your reply.
Meanwhile could anybody else ,send me PPT on it.
Thanks in Advance,
Anil Kumar
Message was edited by:
Anil Kumar Sharma -
How to execute report in Background from Dialog process?
How, or what is the best way, to lauch an executable program (report) into the background from a dialog program (dynpro)?
<b>Example:</b> The SUBMIT...AND RETURN still executes the called program before it returns control to the calling program. I just want the report to be kicked off and the dialog to continue as normal. I do not want the report execution time to affect the dialog process.
Thanks in advance for your time.Hi Nablan, I'm also trying to do parallel processing and created a function module that kicks of another report program.
However, the process doesn't seem to work. The Main program runs from start to finish but the called program in the function module doesn't seem to run. When I used the option STARTING NEW TASK task name the code ran but in the foreground. I don't want to use this option as it runs in the foreground and SAP limits one to six sessions. Is there something I'm missing in the attributes of the function module I created. Currently the attributes are: Processing type Remote enable module and it's set to start immediately. I had used Normal function module initially but this did not work with the STARTING NEW TASK task name option.
Below are the codes segements I used.
In my main program I have the following code segement
CALL FUNCTION 'Z_CA_PROG_CALL'
IN BACKGROUND TASK
EXPORTING
zprogram = 'ZCA_TEST1'
EXCEPTIONS
program_call_failed = 1
invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.
In the function module I have the following code.
FUNCTION z_ca_prog_call.
""Local interface:
*" IMPORTING
*" VALUE(ZPROGRAM) LIKE ZCA_INTERFPROG-ZPROGRAM
*" EXCEPTIONS
*" PROGRAM_CALL_FAILED
*" INVALID
SUBMIT (zprogram).
IF sy-subrc <> 0.
CASE sy-subrc.
WHEN 1.
RAISE program_call_failed.
WHEN OTHERS.
RAISE invalid.
ENDCASE.
ENDIF.
ENDFUNCTION. -
How to execute report into Bex
Hi,
I have made universe and Web I report on the top of query. Then i am asked to export the report into Bex.
Can anyone please guide me how to do it.
RomaHi Roma,
Goto start menu->SAP Front End>SAP Business Explorer-->Query designer. Open the BEX report used in universe and execute it.
If you have access to SAP systems then you can use RSRT transaction to run BEX report.
But if you are talking about running WEB I query in BEX then it is not possible. You will have to test original BEX query only.
Regards,
Durgesh. -
Dynamic CRM 2013 Online how to execute Report, generate PDF and email
Dear All,
I am using Dynamic CRM 2013 online. For quote, I have workflow and Dialogue processes for review process. On approval, I want the system to generate a PDF of quote report, attach the PDF and email it to the Customer.
Better I would like, When approver, clicks on the approve button, the system should auto generate a PDF of quote report, attach the PDF and email it to the Customer, without any further input from the user. If its not possible, I may have to put button on
quote form.
I am using the attached code, but facing various issues.
1. Under prepare the SOAP Message coding part, I am not sure what should be the below URL for CRM 2013 Online?
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
2. What should be the emailid here? Is it Recepient Contact id(Guid) ?
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
3. Using this code, not able to create Entity for "ActivityMimeAttachment", I am getting newEntity as undefined.
Below is the code I am using. Please check and help me out, where I am going wrong. Let me know if any better way to implement it. At present, I have put one button on quote form, on click event, below code will get executed.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript">
var Xrm;
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
function getReportingSession() {
var reportName = "Quotation_Report"; //set this to the report you are trying to download
var reportId = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var recordid = Xrm.Page.data.entity.getId();
// recordid = recordid.substring(1, 37); //getting rid of curly brackets
alert(recordid);
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
retrieveEntityReq.send("id=%7B" + reportId + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" + reportName + "&isScheduledReport=false");
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
function createEntity(ent, entName, upd) {
var jsonEntity = JSON.stringify(ent);
var createEntityReq = new XMLHttpRequest();
var ODataPath = Xrm.Page.context.getServerUrl() + "XRMServices/2011/OrganizationData.svc";
createEntityReq.open("POST", ODataPath + "/" + entName + "Set" + upd, false);
createEntityReq.setRequestHeader("Accept", "application/json");
createEntityReq.setRequestHeader("Content-Type", "application/json; charset=utf-8");
createEntityReq.send(jsonEntity);
var newEntity = JSON.parse(createEntityReq.responseText).d;
alert("new entity" + newEntity);
return newEntity;
function createAttachment() {
var params = getReportingSession();
var recordid = Xrm.Page.data.entity.getId();
alert("recordid " + recordid);
var orgName = Xrm.Page.context.getOrgUniqueName();
var userID = Xrm.Page.context.getUserId();
//create email record
// Prepare the SOAP message.
var xml = "<?xml version='1.0' encoding='utf-8'?>" +"<soap:Envelope xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'" +
" xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'" +
" xmlns:xsd='http://www.w3.org/2001/XMLSchema'>" +
"<soap:Header>" +
"</soap:Header>" +
"<soap:Body>" +
"<Create xmlns='http://schemas.microsoft.com/crm/2007/WebServices'>" +
"<entity xsi:type='email'>" +
"<regardingobjectid type='quote'>" + recordid + "</regardingobjectid>" +
"<subject>" + "Email with Attachment4" + "</subject>" +
"</entity>" +
"</Create>" +
"</soap:Body>" +
"</soap:Envelope>";
// Prepare the xmlHttpObject and send the request.
var xHReq = new ActiveXObject("Msxml2.XMLHTTP");
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
xHReq.setRequestHeader("SOAPAction", "http://schemas.microsoft.com/crm/2007/WebServices/Create");
xHReq.setRequestHeader("Content-Type", "text/xml; charset=utf-8");
xHReq.setRequestHeader("Content-Length", xml.length);
xHReq.send(xml);
// Capture the result
var resultXml = xHReq.responseXML;
// alert("resultXml " + resultXml);
// Check for errors.
var errorCount = resultXml.selectNodes('//error').length;
if (errorCount != 0) {
alert("ERROR");
var msg = resultXml.selectSingleNode('//description').nodeTypedValue;
alert(msg);
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
//var emailid = userID;
var post = Object();
post.Body = encodePdf(params);
var email = new Array();
email[0] =new Object();
email[0].id = emailid;
email[0].entityType ='email';
post.Subject ="File Attachment";
post.AttachmentNumber = 1;
post.FileName ="Report.pdf";
post.MimeType ="application/pdf";
post.ObjectId = Object();
post.ObjectId.LogicalName ="email";
post.ObjectId.Id = email[0].id;
post.ObjectTypeCode ="email";
alert(post.ObjectId.Id);
createEntity(post,"ActivityMimeAttachment", "");
alert("created successfully");
email.Subject = "Your Order";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: customerId, // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerId, // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity). activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] + "&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] + "&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
</SCRIPT>
<SCRIPT type=text/vbscript>
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</SCRIPT>
</head>
<body>
<input type="button" onclick="createAttachment();" value="Attach Report" />
</body>
</html>
Thanks. and waiting for your valuable comments.
- MittalHello,
Yes, I was able to make my code working as below. Tested on CRM online 2013.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date\(([-+]?\d+)\)/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('Quotation');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width, height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "Quotation"; //set this to the report you are trying to download
var reportID = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" +
reportName + "&isScheduledReport=false&p:CRMAF_Filteredquote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html>
Thank you,
Mittal. -
Execute report RMMVRZ00 with variants
Hi Experts,
Could someone explain how to execute report RMMVRZ00 with variants.
Report RMMVRZ00 is similar to transaction MM60.
I am checking how to execute this report with variants.
Thank youThe following link would help in creating variants
[Creating Report Variants|http://help.sap.com/saphelp_45b/helpdata/en/73/69ee7d55bb11d189680000e829fbbd/content.htm]
If you have any specific requirement with variant, please post again -
How to execute the Portal Activity Report
Hello,
In the System Administration -> System Configuration-> Service Configuration Editor
Under Applications->com.sap.portal.activityreport.core-> Services->ActivityReport and I have configured the report.
I saved I have restarted the service to effect the changes and in Portal Catalog
Application->com.sap.portal.activityreport.core and I have administrated the changes. The Application Details Editor is displayed.
I have clicked the Restart the portal also.
I would like to know how to execute this Portal Activity Report after making this configuration.
Can anyone help me.
Thnx in advance
cheers
KrisHi Kris,
here an example with steps:
1. Navigate to Content Administration -> Portal Content
2. Step into a test folder and right click on the folder to create a new iView
2. Select the template "Portal Activity Report iView"
Name: Daily User Logins
Technical Name: DailyUserLogins
3. Open the newly created iView and define the following parameters
under "Specify report content"
Start of Reporting: Date 01.01.2005 and Time: 08:00
End of Reporting: Date 31.12.2005 and Time: 24:00
Time Unit for Reporting: Daily
under "Configure report options"
Information to Report: Number of users logged on
You have created a new reporting iView, aggregating information about the number of anonymous and authenticated users on a daily basis.
Hope this helps,
Robert -
Time out when run execute report on Webgui or transaction iView
Dear All,
We found the error as bellow when we execute report that load huge size of data so it would like many time to get it.
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu Mar 6 19:33:49 2008
Module: icxxthr_mt.c
Line: 2698
Server: irpc16_QAS_50
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Anyone please tell us about the way to edit timeout of webgui or iView.
Thank you very much,
Anek.Dear Krishna
It's helpful.
Goto rz10 transcation
Choose: Instance profile
Select: extended maintaince
Click: change
Set value for parameter 'icm/keep_alive_timeout'
If there is not parameter 'icm/keep_alive_timeout', create it.
Save it.
Restart SAP.
Please tell me how to give point for you.
Thank you for ur reply,
Anek. -
Hi Abapers,
I had a requirement to convert the smartform 'zpurchase'(customized std. PO form /SMB80/MMPO_ES), into an executable(report) program..so tat the user can execute this program by giving the Po Number in the run time and get the required form print out....
I had written a print program(zpo) for this form, but after executing i got only the layout not the values .... So guide me how to pull the values from tcode ME23N.....
REPORT ZPO.
tables: ekko,pekko,ekpo,ekpa,eket,ekkn,ekek,komk.
*parameters: iv_druvo like druvo.
parameters: iv_ekpo like ekpo-ebeln.
data : fm_name type rs38l_fnam.
data: it_ekpo like standard table of ekpo,
it_ekpa like standard table of ekpa,
it_pekpo like standard table of pekpo,
it_eket like standard table of eket,
it_tkomv like standard table of komv,
it_ekkn like standard table of ekkn,
it_ekek like standard table of ekek,
it_komk like standard table of komk.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZPURCHASE'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = fm_name
* EXCEPTIONS
* NO_FORM = 1
* NO_FUNCTION_MODULE = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.Code as follows..........
CALL FUNCTION fm_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
IS_EKKO = ekko
IS_PEKKO = pekko
* IS_NAST =
* IV_FROM_MEM =
* IV_DRUVO = druvo
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
TABLES
IT_EKPO = it_ekpo
IT_EKPA = it_ekpa
IT_PEKPO = it_pekpo
IT_EKET = it_eket
IT_TKOMV = it_tkomv
IT_EKKN = it_ekkn
IT_EKEK = it_ekek
IT_KOMK = it_komk
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to execute this SQL Query in ABAP Program.
Hi,
I have a string which is the SQL Query.
How to execute this sql Query (SQL_STR) in ABAP Program.
Code:-
DATA: SQL_STR type string.
SQL_STR = 'select * from spfli.'.
Thanks in Advance,
VinayHi Vinay
Here is a sample to dynamically generate a subroutine-pool having your SQL and calling it.
REPORT dynamic_sql_example .
DATA: BEGIN OF gt_itab OCCURS 1 ,
line(80) TYPE c ,
END OF gt_itab .
DATA gt_restab TYPE .... .
DATA gv_name(30) TYPE c .
DATA gv_err(120) TYPE c .
START-OF-SELECTION .
gt_itab-line = 'REPORT generated_sql .' .
APPEND gt_itab .
gt_itab-line = 'FORM exec_sql CHANGING et_table . ' .
APPEND gt_itab .
gt_itab-line = SQL_STR .
APPEND gt_itab .
gt_itab-line = 'ENDFORM.' .
APPEND gt_itab .
GENERATE SUBROUTINE POOL gt_itab NAME gv_name MESSAGE gv_err .
PERFORM exec_sql IN PROGRAM (gv_name) CHANGING gt_restab
IF FOUND .
WRITE:/ gv_err .
LOOP AT gt_result .
WRITE:/ .... .
ENDLOOP .
*--Serdar -
How to generate report with dynamic variable number of columns?
How to generate report with dynamic variable number of columns?
I need to generate a report with varying column names (state names) as follows:
SELECT AK, AL, AR,... FROM States ;
I get these column names from the result of another query.
In order to clarify my question, Please consider following table:
CREATE TABLE TIME_PERIODS (
PERIOD VARCHAR2 (50) PRIMARY KEY
CREATE TABLE STATE_INCOME (
NAME VARCHAR2 (2),
PERIOD VARCHAR2 (50) REFERENCES TIME_PERIODS (PERIOD) ,
INCOME NUMBER (12, 2)
I like to generate a report as follows:
AK CA DE FL ...
PERIOD1 1222.23 2423.20 232.33 345.21
PERIOD2
PERIOD3
Total 433242.23 56744.34 8872.21 2324.23 ...
The TIME_PERIODS.Period and State.Name could change dynamically.
So I can't specify the state name in Select query like
SELECT AK, AL, AR,... FROM
What is the best way to generate this report?SQL> -- test tables and test data:
SQL> CREATE TABLE states
2 (state VARCHAR2 (2))
3 /
Table created.
SQL> INSERT INTO states
2 VALUES ('AK')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('AL')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('AR')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('CA')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('DE')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('FL')
3 /
1 row created.
SQL> CREATE TABLE TIME_PERIODS
2 (PERIOD VARCHAR2 (50) PRIMARY KEY)
3 /
Table created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD1')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD2')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD3')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD4')
3 /
1 row created.
SQL> CREATE TABLE STATE_INCOME
2 (NAME VARCHAR2 (2),
3 PERIOD VARCHAR2 (50) REFERENCES TIME_PERIODS (PERIOD),
4 INCOME NUMBER (12, 2))
5 /
Table created.
SQL> INSERT INTO state_income
2 VALUES ('AK', 'PERIOD1', 1222.23)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('CA', 'PERIOD1', 2423.20)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('DE', 'PERIOD1', 232.33)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('FL', 'PERIOD1', 345.21)
3 /
1 row created.
SQL> -- the basic query:
SQL> SELECT SUBSTR (time_periods.period, 1, 10) period,
2 SUM (DECODE (name, 'AK', income)) "AK",
3 SUM (DECODE (name, 'CA', income)) "CA",
4 SUM (DECODE (name, 'DE', income)) "DE",
5 SUM (DECODE (name, 'FL', income)) "FL"
6 FROM state_income, time_periods
7 WHERE time_periods.period = state_income.period (+)
8 AND time_periods.period IN ('PERIOD1','PERIOD2','PERIOD3')
9 GROUP BY ROLLUP (time_periods.period)
10 /
PERIOD AK CA DE FL
PERIOD1 1222.23 2423.2 232.33 345.21
PERIOD2
PERIOD3
1222.23 2423.2 232.33 345.21
SQL> -- package that dynamically executes the query
SQL> -- given variable numbers and values
SQL> -- of states and periods:
SQL> CREATE OR REPLACE PACKAGE package_name
2 AS
3 TYPE cursor_type IS REF CURSOR;
4 PROCEDURE procedure_name
5 (p_periods IN VARCHAR2,
6 p_states IN VARCHAR2,
7 cursor_name IN OUT cursor_type);
8 END package_name;
9 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY package_name
2 AS
3 PROCEDURE procedure_name
4 (p_periods IN VARCHAR2,
5 p_states IN VARCHAR2,
6 cursor_name IN OUT cursor_type)
7 IS
8 v_periods VARCHAR2 (1000);
9 v_sql VARCHAR2 (4000);
10 v_states VARCHAR2 (1000) := p_states;
11 BEGIN
12 v_periods := REPLACE (p_periods, ',', ''',''');
13 v_sql := 'SELECT SUBSTR(time_periods.period,1,10) period';
14 WHILE LENGTH (v_states) > 1
15 LOOP
16 v_sql := v_sql
17 || ',SUM(DECODE(name,'''
18 || SUBSTR (v_states,1,2) || ''',income)) "' || SUBSTR (v_states,1,2)
19 || '"';
20 v_states := LTRIM (SUBSTR (v_states, 3), ',');
21 END LOOP;
22 v_sql := v_sql
23 || 'FROM state_income, time_periods
24 WHERE time_periods.period = state_income.period (+)
25 AND time_periods.period IN (''' || v_periods || ''')
26 GROUP BY ROLLUP (time_periods.period)';
27 OPEN cursor_name FOR v_sql;
28 END procedure_name;
29 END package_name;
30 /
Package body created.
SQL> -- sample executions from SQL:
SQL> VARIABLE g_ref REFCURSOR
SQL> EXEC package_name.procedure_name ('PERIOD1,PERIOD2,PERIOD3','AK,CA,DE,FL', :g_ref)
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD AK CA DE FL
PERIOD1 1222.23 2423.2 232.33 345.21
PERIOD2
PERIOD3
1222.23 2423.2 232.33 345.21
SQL> EXEC package_name.procedure_name ('PERIOD1,PERIOD2','AK,AL,AR', :g_ref)
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD AK AL AR
PERIOD1 1222.23
PERIOD2
1222.23
SQL> -- sample execution from PL/SQL block
SQL> -- using parameters derived from processing
SQL> -- cursors containing results of other queries:
SQL> DECLARE
2 CURSOR c_period
3 IS
4 SELECT period
5 FROM time_periods;
6 v_periods VARCHAR2 (1000);
7 v_delimiter VARCHAR2 (1) := NULL;
8 CURSOR c_states
9 IS
10 SELECT state
11 FROM states;
12 v_states VARCHAR2 (1000);
13 BEGIN
14 FOR r_period IN c_period
15 LOOP
16 v_periods := v_periods || v_delimiter || r_period.period;
17 v_delimiter := ',';
18 END LOOP;
19 v_delimiter := NULL;
20 FOR r_states IN c_states
21 LOOP
22 v_states := v_states || v_delimiter || r_states.state;
23 v_delimiter := ',';
24 END LOOP;
25 package_name.procedure_name (v_periods, v_states, :g_ref);
26 END;
27 /
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD AK AL AR CA DE FL
PERIOD1 1222.23 2423.2 232.33 345.21
PERIOD2
PERIOD3
PERIOD4
1222.23 2423.2 232.33 345.21 -
How to execute the content of varchar variable like a simple query
Hi everyone!
I did a PL/SQL region in apex, in this region I did the query which is storaged in a variable; it was did it concatenate several times,
in the procedure I have several sentences.
I thought that the command 'execute immediate' would get a good result but it do not print the result.
declare
variable varchar2(1000);
begin
--sentences
--execute inmmediate( variable );
--return variable
end;
I only want to how to execute the content of varchar variable.
For example, suppose that the result of this procedure is
'SELECT SYSDATE FROM DUAL'
How and what do I must do for this query execute like a normal query that is in apex?
I expect your prompt reply.
Thank you for your help.
Best regardsLet us say your table containing SQL is
t_sql_table
and has two columns
primary_key
and
sql_query.
You would need to do the following:
1. Create a Report of type "Function returning SQL Query"
2. Put the following there:
DECLARE
v_query VARCHAR2 (4000);
BEGIN
SELECT sql_query
INTO v_query
FROM t_sql_table
WHERE primary_key = 1;
RETURN v_query;
END;Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Hi, experts,
I try to use Tcode: Rsrt to analysis the difference if report use aggregates or not.
under the "Execute + Debug" button, I select the option "Display Statistics Data". but in output text interface, I can not found any information for query performance ( for example: run time, how much rows readed, how many transfer to OLAP processor, etc )
thanks in advance.hi,
hope SAP Note Number: 130696 -Performance trace in BW-
helps
Symptom
How can you monitor the performance of a query in BW?
Other terms
Performance, tracing, BW, query, report, time
Solution
1) Activate the saving of statistical data for each InfoCube
-> BW Admin Workbench - Tools -> BW Statistics for Infoproviders ->
Select the "OLAP" field for the InfoCube.
3) Execute report/query
2) Analyze the RSDDSTAT table using Transaction SE16
Access, for example, using the InfoCube name or the user name or the
timestamp
1. Times that are saved:
QTIMEOLAPINIT
Time of the initialization of the query (for example, loading query in OLAP, compiling if required)
QTIMEOLAP
Time that the OLAP processor required
QTIMEDB
Time the database + network required to select the transaction data. The time is measured from when the SQL command is send to the database, and it is stopped when the requested data reaches the application server. This time therefore includes the transport on the network and the selection on the database.
QTIMEVARDP
Time the user required to enter the variables
QTIMEUSER
Time the user required between the navigation steps
QTIMECLIENT
Time of data formatting in the frontend
The time measurment starts when the OLAP processor has completed the data formatting. The data is then sent to the frontend (EXCEL). The time is stopped when the frontend (BW add-in in EXCEL) has inserted all data in the worksheets (writing the contents and formatting cell, if required). The time therefore includes the transport on the network with the RFC connection and the output in the frontend.
TIMECHAVLREAD
Time required to read master data
TIMEAUTHCHECK
Runtime of the authorization check.
TIMEREST
Time that could not be assigned in more detail (should be equal to 0; if this is not the case, something in the internal processing of the OLAP processor occured differently than expected.)
QRUNTIMECATEGORY
Time of a navigation step (QTIMEOLAPINIT + QTIMEOLAP + QTIMEDB + QTIMEEXCEL + QTIMECHAVLREAD) rounded to the next higher scaling (1,10,100,1000 ... seconds). As of 1.2B, this is rounded to 1,2,3, ... 10,20,30,...100,200,300,... seconds.
1. Data regarding the size of the query:
QDBSEL
Number of the records that had to be read on the database
QDBTRANS
Number of records that the database transferred to the server
QNUMCELLS
Number of cells that were transferred to the frontend
QNUMRANGES
Number of formattings that were transferred to the frontend
RECCHAVLREAD
Number of master data records to be read
1. In addition, the following is saved:
QAGGRUSED
Name of the aggregate used
QNACHLESEN
Indicator: Query reads during each navigation step
1. Administrative information
STATUID
Key of the table; link in view RSDDSTAT_V
QSESSION
All data for a call of the frontend (between start and end of the frontend) is compounded with this unique GUID.
QNAVSTEP
The navigation steps of a QSESSION are numbered in ascending order
QNUMOLAPREADS
Number of read operations OLAP processor for each navigation step
HANDLE
In the frontend, each embedded query has a separate, sequential number (handle)
If you want to analyze a certain query, start it and filter the values from the table afterwards: Selection options: infocube, user name, queryid (can be determined in the report monitor (Transaction RSRT)-> Technical information). The STARTTIME (UTC time) tells you whether you have found the correct session.
You can recognize a session because the QSESSION is always assigned the same ID. The sequence of the navigation steps is saved in QNAVSTEP. However, you can also determine it using the STARTTIME. -
Pl/sql function overload package program and how to execute
--creation overload package
create or replace package pkg_overload is
procedure get_emp(p_empid in number,p_empsal out number);
procedure get_emp(p_ename in varchar2, p_empsal out number);
end;
-- define its body
create or replace package body pkg_overload is
procedure get_emp(p_empid in number,p_empsal out number) is
begin
select sal
into p_empsal
from emp
where empno=p_empid;
end;
procedure get_emp (p_ename in varchar2,p_empsal out number) is
begin
select sal
into p_empsal
from emp
where ename=p_ename;
end;
end pkg_overload;
/* output of this :PACKAGE pkg_overload compiled
Warning: execution completed with warning
-- My question is about the warning and how to execute it
--I tried that way to execute that program
/*variable g_sal number;
execute pkg_overload.get_emp(77934,:g_sal);
RESULT
Error starting at line 911 in command:
execute pkg_overload.get_emp(77934,:g_sal)
Error report:
ORA-06550: line 1, column 7:
PLS-00905: object SUBHAJIT.PKG_OVERLOAD is invalid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
emp table code
-- File created - Thursday-April-12-2012
-- DDL for Table EMP
CREATE TABLE "SUBHAJIT"."EMP"
( "EMPNO" NUMBER(4,0),
"ENAME" VARCHAR2(10 BYTE),
"JOB" VARCHAR2(9 BYTE),
"MGR" NUMBER(4,0),
"HIREDATE" DATE,
"SAL" NUMBER(7,2),
"COMM" NUMBER(7,2),
"DEPTNO" NUMBER(2,0)
) SEGMENT CREATION IMMEDIATE
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "USERS" ;
REM INSERTING into SUBHAJIT.EMP
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7369,'SMITH','CLERK',7902,to_date('17-DEC-80','DD-MON-RR'),800,null,20);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7499,'ALLEN','SALESMAN',7698,to_date('20-FEB-81','DD-MON-RR'),1600,300,30);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7521,'WARD','SALESMAN',7698,to_date('22-FEB-81','DD-MON-RR'),1250,500,30);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7566,'JONES','MANAGER',7839,to_date('02-APR-81','DD-MON-RR'),2975,null,20);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7654,'MARTIN','SALESMAN',7698,to_date('28-SEP-81','DD-MON-RR'),1250,1400,30);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7698,'BLAKE','MANAGER',7839,to_date('01-MAY-81','DD-MON-RR'),2850,null,30);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7782,'CLARK','MANAGER',7839,to_date('09-JUN-81','DD-MON-RR'),2450,null,10);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7788,'SCOTT','ANALYST',7566,to_date('09-DEC-82','DD-MON-RR'),3000,null,20);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7839,'KING','PRESIDENT',null,to_date('17-NOV-81','DD-MON-RR'),5000,null,10);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7844,'TURNER','SALESMAN',7698,to_date('08-SEP-81','DD-MON-RR'),1500,0,30);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7876,'ADAMS','CLERK',7788,to_date('12-JAN-83','DD-MON-RR'),1100,null,20);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7900,'JAMES','CLERK',7698,to_date('03-DEC-81','DD-MON-RR'),950,null,30);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7902,'FORD','ANALYST',7566,to_date('03-DEC-81','DD-MON-RR'),3000,null,20);
Insert into SUBHAJIT.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) values (7934,'MILLER','CLERK',7782,to_date('23-JAN-82','DD-MON-RR'),1300,null,10);
-- Constraints for Table EMP
ALTER TABLE "SUBHAJIT"."EMP" MODIFY ("EMPNO" NOT NULL ENABLE);
Edited by: 923746 on Apr 12, 2012 1:18 PM>
Warning: execution completed with warning
>
The package compiled with warnings. Post the exact error message.
The code compiled with no errors for me in the SCOTT schema using that EMP table. -
How to use report designer using bex analyser give screenshots details
how to use report designer using bex analyser give screenshots details
Hi,
As per my understanding you want to see Query Designer when you execute the query in BEx Analyzer.
When you launch BEx analyzer,you should be able to see new tab of "Business Explorer" in your Toolbar.
So,when you execute the query in BEx analyzer,in order to goto query designer screen,click on Tab "Business Explorer",select option "Change Query" and then select the option "ChangeQuery (Global Definition)".
It will open the query designer in which you can modify the query and save it.
Regards,
Nilima
Maybe you are looking for
-
Photoshop CC: program error occures when working with videos
Whenever I'm trying to trim a video in Photoshop CC I'm running into this error: "Could not complete your request because of a program error" I can't close it by clicking "okay", so I have to close photoshop via task manager. - I also came across thi
-
New HP color laserjet pro mfp supply low
I just setup a new HP color laserjet pro mfp and it says the cartridge supply is low and won't print.
-
Problems extracting tar.gz and zip
Hi ^^ So, I'm running Arch and Openbox and I was going to install GTK2 themes when I noticed my tar.gz file wouldn't open - then I remembered I hadn't installed p7zip and so I did - still no luck... I even rebooted the computer, but still no luck...
-
Dear Aperture Community, I recently purchased a new iMac and used a time machine backup of my old iMac to move my files over to the new Mac. All seemed to work well, and I have been using my new iMac happily for a couple of weeks. I have Aperture 3.4
-
Hi there. I have recently erased my HD on mac book pro and reinstalled osx. Since then when I start the mac up when I come to log on I have my normal ID profile and one next to it that says Disk Password. Doesn't matter which one I click it takes me