How to find deleted process chain and query

Hi All
Some body has deleted one process chain and one query from development system
how can i know who has deleted these?
is there any table where deleted process chain and queries will maintain????
Thanks & Regards,
Krishna
Edited by: krishnamurthy g on Sep 1, 2008 5:33 PM

Hi,
Usually its totally in tractable to find a deleted chain :
But you can try out with the following options:
1> T-code SLG2 .
2> T-code SLG1 - find out who was logged on to the system on that particular client at that time.
3> Try out the following tables in se16 :
RSPCLOGS --- Application Logs for the Process Chains
RSPCLOGCHAIN --- Cross-Table Log ID / Chain ID
RSPCCOMMANDLOG --- System Command Execution Logs (Process Chains) .
Hope it will be expedite.
Thax & Regards.
Vaibhave Sharma

Similar Messages

How to resume deleted process chain

HI BW gurus,
I have 1 process chain which loads data to ZFIGL_01 infocube.But by mistake the process chain got deleted from the meta chain as well as main chain.
Is there any step to recreate the process chain.And will it affect my main process chain which will run tomorrow at 3.30
Please guide.
Regards,
Shailja kaul.

You can go ahead and create the process chain and add it to your main process chain also. After you have done that. Make sure that you activate and schedule it.
After scheduling the Process chain you can go ahead and check for the scheduled job by right click on the start process.
Let me know if you face any problems
Regards,
Abhishek

Where will I specify process chain and query time statistics to be loaded .

I am on BI 7.0. I see on my system, BI Statistics Technical Content has been installed because when I run
RSDDSTAT transaction under Info Provides I see cubes such as 0TCT_C01, oTC_C02, oTCT_C03, oTCT_MC01, 0TCT_VC01..
I also see process chains installed on my system such as oTCT_C2_INIT_P01, oTCT_C2_DELTA_P01.
I see various RSDDSTAT* tables being populated on my system as well.
My questions are:
1.     How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
2.      Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
3.     Does ST03N transaction display data from 2.
THANKS A LOT.

Hi,
1.     How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
You can find the DataSource in RSA1. For example, 0TCT_C01 is updated from 0TCT_DS01. And you need to schedule process chain 0TCT_C0_DELTA_P01 for query statistics and 0TCT_C2_DELTA_P01 for data load statistics on a regular basis. Of course, as they are delta chains, you need to first run initializaiton chains for just one time before scheduling delta chains. The initialization chains are 0TCT_C0_INIT_P01 and 0TCT_C2_INIT_P01.
2.      Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
As I know, the statistics data are first stored in RSDDSTAT* tables. For example, query data are stored in RSDDSTAT_OLAP. And the data are loaded to corresponding cubes when you executing InfoPackages.
You can refer to this link and search "Recording BI Statistics" in this page:
http://help.sap.com/saphelp_nw70/helpdata/en/44/3521c7bae848a1e10000000a114a6b/content.htm
3.     Does ST03N transaction display data from 2.
Yes. If BI Statistics content are not activate you would be unable to view statistics data in ST03N.
Let us know if you have other questions.
Regards,
Frank

How to find a process chain in RSPC if u know the Chain ID?

Hi,
is there any way to know the process chain if u cud know the chainid fro the same?
i had find the option "find" that does not have the finding PC by its ID
by description it is taking ages to find one PC
Raj

Dear Raj Karan ,
Go to RSPC
Just try to widen the window ,by moving ur cursor to the part where blue screen and greyish screen meets ..
Once you widen ,you could see the
Obj name ,no and description of PC
Also you can try giving ur description in
RSPC1.
Hope it helps
Regards
Bala

How to get the process chain name if we know the data target in sap bi

Hi SAP BI Gurus,
Can any help me how to find the process chain name if we know the data target name
i mean if i know the info cube name how to find the relavant process chain which is holding that info cube
Thanks,
Joe

Hi R Kumar,
Check the table RSPCCHAIN.
I mean, Use Table RSPCCHAIN and give the local chain tech name in VARIANTE field and search, in out put you will get meta chain name under the field CHAIN_ID.
Thanks,
Sreehari.

Process Chain and Info Package Transportation?

Hello All
Case 1
How to transport a Process chain and a Info Package Individually?(first time from DEV to QA)
Case 2
I have 9(IP1 to IP9)infopackages and 3(P1 to P3) Process chains and in each Process chain I have 3 Info packages like IP1,IP2,IP3 in P1 and so on.,
Now is it necessary to transport Infopackages and Process chains individually or is it enough to transport Process chains only(If v transport Process chains will the Infopackages will also transport)then how to assign a request to each one?
What I mean is,all Infopackages are in $TMP(Package),and Process chain is also $TMP,Now is it necessary to change the package for Infopackages as well as Process chain and Tranport only PC,Iam confused here,can anyone help me out?
Many thanks
balaji

Hi Balaji,
If you have created new infopackages then you have to transport them. It is not necssary to transport the info-packages if you have them in the process chain but have not changed them.
Also you cannot transport any BW object with $ tmp package. Assign a package and then transport the objects.
The best way to transport the process chain is from the RSPC screen. Click the transport button there and collect all the objects and transport them.
Bye
Dinesh

How can we transport process chains

HI,
Can anybody explain me the procedure to transport the objects between servers.
rajini

Hi Rajini,
Goto -> RSA1 -> Transport connection ->SAP Transport ->Click on Object types.
You will get all Object types in the next tab. Select the process chain object type and find your process chain and transfer.
Selected process chain will be appear in right side tab. Check the Objects and transport them.
regards,
anil

H how to find if the psa table is included in psa deletion process chain

Hi all
can anybody tell me .
I have a psa table it's technical name is /BIC/B*
h how to find the above psa table is included in psa deletion process chain or not
please help me

Hi
Ope the PC in RSPC1 -->go to planning view of process chain
in left side you will find different types of process types.
under other BW process types folder -->you will find process type "Delete request from PSA"
drag this into your process chain planning view and customize it based on your requirements.
check the below article for step by step procedure
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Regards,
Venkatesh

How to collect and move the deleted process chain to Prod.

Hi,
I have a process chain (BI 7)that is already in D,Q and P and now I want to delete a Process Chain under "Display Component" and my question is how to collect the deleted process chain to move all the way to Q and P.
Waiting for your response
Regards,
Sunil

Hi Srinivas,
Thank You ,I was scared that i dont get any request to collect and my problem is resolved.
Regards,
Sunil

How to know the process chain start time and end time

Hi Experts,
How to know the process chain start time and end time .
Thanks in advance
Regards
Gutti
Edited by: guttireddy on Feb 23, 2012 11:30 PM

Hi Reddy,
You may find the run time of a PC using below steps.
1. Call SE38 > /SSA/BWT > Execute > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
Hope this helps.
Regards
Sai

How to find the processing time of any query?

im using oracle express edition, can anyone help me, how to find the processing time of any query?

Trace the query and tkprof the generated trace file.
http://download.oracle.com/docs/cd/E11882_01/server.112/e16638/sqltrace.htm#PFGRF01010

How to delete Process Chain Variant

Hi all~
I'd like to delete Process Chain Variant .
But I can't find delete menu from RSPC.
It could be easy, but... I can't find it~ ^^;;
Thank you in advance~ ^^;;

Hello,
1. Select the necessary process type from the menu.
2. Type in the technical name of the variant and click change button.
3. When maintenance screen is opened you can delete the variant by clicking delete button.
or
chk the tables for your variants :
RSPCVARIANTATTR
RSPCVARIANT
RSPCVARIANTT
RSPCTRIGGER
Or you can go to maintain variant for any existing variant and choose your variant form the list, delete it.
Regards,

How to create process chains,and how to use process like and or xor

Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.

Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik

How to delete Process Chains

Hi Experts,
I created Process chain for Deliveries in D sys and transported to P sys. Here we have six source systems so first we created 6 process chains for each source systems. Later we decide to add all those variants in one Process chain and we deleted individual process chain and transported to P sys.
So Process chains are deleted in D system and P system but changes are not effected in P system. Process Chains are not invisible both D & P systems.
But when we run the Deliveries Process chain, deleted Process chains are also running. And getting Error due to both are scheduled at same time. Because deleted Process chains are still showing in where used list....
Can any one help me guys!!!!
Thank you,
Suresh

Hi Suresh,
Can you please let us know what type of scheduling option you have used in the start variant.
Also please have a check if the start variant in all the chains are the same?
As per my understanding unless the start variant is triggered the chains will not get scheduled.
Also there is a bug in Bi7.0, that once the process chain transport has been completed to other environemt its starts getting executed if the start variant hold tha option as Direct scheduling - > Immediate.
Prathish

How to reuse the process chain which has been deleted?

hi
guys
how to reuse the process chain which has been deleted?
your regards
suresh

if you want to "recover" the deleted process chain, try to check DEV / QAS / PRD. Maybe there is a copy still available
Or check the following tables in SE11: RSPCCHAIN / RSPCCHAINATTR
Good luck !

How to find deleted process chain and query

Similar Messages

Maybe you are looking for