How to fix incoming call!?

I have installed NEW V4.91 on 6233,and when I chose video(3gp or mp4) as ringtone the people who are calling me,when I answer they can`t hear me but I can hear them! Anything allse is normall. Can anybody HELP me???

OK, I managed to resolve my problem. Here is what happened:
1. My application opened a socket and spawned a thread which listened on socket. Thread was blocked in socket.receive()
2. At one point (when dialog button is pressed) I wanted to stop a thread and close the socket so I called thread.interrupt()
3. In addition I was calling socket.close(), socket.bind() and socket.connect() but no messages came out of such socket
EXPLANATION: This is wrong cause thread listening on a socket should be terminated by a simple call to socket.close(). Java documentation clearly states that. Another mistake of mine was that I closed socket and wanted to reuse it by operations socket.bind() and socket.connect(). Turns out, once socket closed it can not be bound.
I hope this post helps someone in similar situation.

Similar Messages

How to disconnect incoming call in ios7 when iPhone is locked?

How to disconnect incoming call in ios7 when iPhone is locked?

Press the Sleep/Wake button twice quickly on the top of iPhone

How to block incoming call on iphone

how to block incoming call on iphone

Contact your carrier & see if they offer call blocking...some do, some don't. There is no other way to block calls on any cell phone.

How to limit incoming call on B-ACD CME?

I have configure B-ACD on CME 4 and its working. But I have a problem with incoming call from outside (PSTN). I set queue-len for 30 queue. But on busy hour, some call hear only ring tone. No greeting tone or busy tone. When I check call session, its only 10 or 15 session.
How to limit incoming call, let say, for 10 calls only? The 11th call will receive busy tone.
Here are my config:
application
service queue flash:app-b-acd-2.1.2.2.tcl
param queue-len 30
param queue-manager-debugs 1
param number-of-hunt-grps 1
param aa-hunt2 0
service aa flash:app-b-acd-aa-2.1.2.2.tcl
paramspace english index 1
param number-of-hunt-grps 1
param handoff-string aa
param dial-by-extension-option 1
paramspace english language en
param max-time-vm-retry 1
param max-extension-length 7
param aa-pilot 2999
paramspace english location flash:
param second-greeting-time 30
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 60
param voice-mail 0
param service-name queue
FYI: I have no voice mail. 'param voice-mail 0' is to send unanswered call to my operator.
Regards,
Iwan

Hi Iwan,
To restrict the number of calls to the application you need to configure only the appropriate number (10 in your example) of dial-peers to point to the AA Pilot number. Have a look;
Set Up Incoming Dial Peers for AA Pilot Numbers
In this task, you associate dial peers for incoming calls with the AA service that you want them to use.
Cisco Unified CME B-ACD is available for outside calls through voice ports and trunks, for which dial peers must be set up. When you set up a dial peer, you use the service command to associate it with the name of the Cisco Unified CME B-ACD AA service that you want callers to that dial peer to reach.
Note You must configure a dial peer for each incoming DID voice port.
To determine how many ports or trunks you must have for your Cisco Unified CME B-ACD service, consider the following:
Total number of phones across all ephone hunt groups
Total number of slots in the queues across all queues
Total number of PSTN ports feeding into the queues
The number of simultaneous calls that Cisco Unified CME B-ACD can handle is limited by the number of PSTN ports, but these ports may not always be in use. For example, you could have three queues with ten slots per queue, but configure only 10 ports instead of 30 because you do not expect the three queues to ever be full at one time.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2305.html#wp1003323
Hope this helps!
Rob

How to handle incoming call by means j2me

Hello Everyone,
Let me kindly ask your support in such important for me question: How I can handle incoming calls by means j2me (cldc - 1.0; midp - 2.0).
Thank you in advance.

I mean what I say: you can't handle calls in j2me.

How to disconnect incomming call on iPhone 3GS with 4.3.2

I'm using iPhone 3GS but unfortunately I have no idea how to disconnect the unwanted incomming call.
Please guide me...!!

Ummmm, do not answer the call.
Or do you want to know how to block certain calls? That is a carrier function.

How to disconnect incoming call when the phone is locked...!!?

I feel that the major bug in iOS 7 is, we cannot disconnect the incoming call when the phone is locked. I dont understand whats the reason behind not fixing this issue...! My iphone lock/unlock button is getting spoiled day by day as am using that button evert time to disconnect the incoming call when the phone is locked.
Apple, please give me the genune reason for not fixing this issue, else fix this ASAP.
Thanks.

https://discussions.apple.com/message/23151421#23151421

How to get incoming call number in j2me

hi all,
Is there any way to get incoming call number in j2me???
thanks in advance
mraj

You can't get this number at least till MIDP 2.0 devices.. you only have a interrupt events which call showNodify and hideNotify, pauseApp or start methods. Once can neither know if this interrupt is due to phone call, user switching to menu or sms etc..
Regards,
Raja Nagendra Kumar

HT5957 How to reject incoming call.?

In os6XXX it was enough to slide up and reject button was appear. In os7 is only green button for receiving incomming call but there is no possibility to slide in order to get the button for reject incomming call. Why???

The call can be rejected by tapping the On/Off button, or double tapping to send immediately to VoiceMail.
As to why Apple removed that useful feature ?????

How to fordware incoming calls at determinate hours

I have configured a time period at no officce hours. After that, I assigned it to a time shedule. Then I assigned it to a partition and the partition to a calling search space.
Now, I want a dial number of my net to be fordwared to another phone number out of my AVVID net at the no office hours that I have configured in the time period.
I don't know if this is the right way to do it.
Could you help me?.

If you want to send all incoming calls to voice mail or another ext on non-business-hours please follow this procedure:
Lets assume that you want the phone to ring from 9 to 5:15 and the rest of the day and during the weekend it should go to voice mail or another extension, and that you have a range of extensions that you want to apply this configuration for, (3xxx).
1) configure time periods.
a) configure a time period, (ring hrs) from 9 to 5:15 from Monday to Friday.
b) configure a time period, (after hrs), from 5:15 to 00:00 from Monday to Friday.
c) configure a time period, (before hrs), from 00:00 to 8:00 from Monday to Friday.
d) configure a time period, (weekends), from 00:00 to 24:00 from Saturday to Sunday.
2) configure a time schedules.
a) configure a time schedule, (ring), and add the "ring hrs" time period.
b) configure a time schedule, (no ring), and add the "after hrs", the "before hrs" and the "weekends" time periods.
3) configure partitions.
a) configure a partition, (RingHrs), and add the time schedule "ring" to this new partition.
b) configure a partition, (NoRingHrs), and add the time schedule "no ring" to this new partition.
c) configure a partition, (PhoneTOD)
d) configure a partition, (CTI_TOD)
4) configure calling search spaces
a) add the partition "RingHrs" to the calling search spaces that would be able to reach the phone by checking the TOD, (you must apply this to the CSS of the GW if the TOD would apply for incoming calls, if the TOD would also apply for internal calls you must apply this to the CSS of the internal phones also)
b) add the partition "NoRingHrs" to the calling search spaces that would be able to reach the phone by checking the TOD, (you must apply this to the CSS of the GW if the TOD would apply for incoming calls, if the TOD would also apply for internal calls you must apply this to the CSS of the internal phones also)
c) add the partition "PhoneTOD" to the calling search spaces that would be able to reach the phone directly, without checking the TOD.
5) configure CTI
a) configure a CTI port or route point with an extension 3XXX, (or the extension itself, if this is for only 1 phone) and use the partition "CTI_TOD", configure the line as call forward all to the number you want to, (or check the CFA to voice mail checkbox)
6) configure translation patterns
a) configure a translation pattern, (3XXX), use the partition "RingHrs", and use a calling search space that has the partition "PhoneTOD" in it, (this would be the translation pattern that would be able to reach the phone).
b) configure a translation pattern, (3XXX), use the partition "NoRingHrs", and use a calling search space that has the partition "CTI_TOD" in it, (this would be the translation pattern that would NOT be able to reach the phone).
c) if you want to configure a 'bypass' for the TOD add a translation pattern, (1.3XXX), use partition none or another partition that can be reach by the user of this bypass, and use a calling search space that can reach the "PhoneTOD" partition.

How to display incoming caller numbers from india

I live in US. When some one calls from india, No caller ID is displayed on iphone. How to see the number. I already verified that the callers did not blocked their numbers from being visible.

I am using att. The number gets displayed on other att phones but not on iphone. This makes me believe that it should be problem with iphone.!

How to fix incoming server for gmail

how do i configure gmail on iphone 4s. it states INCOMING SERVER error and does not allow my gmail access as in past.

Setup Gmail on iOS
Setup Gmail as Exchange on iOS

HT3302 How to fix low call volum

Call volume very low

Hi Fantasiadunlap,
If you are having receiver or call volume issues with your iPhone, you may find the following article helpful:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Regards,
- Brenden

How to fix low in call volume

How to fix in call low volume ?

Hi Fantasiadunlap,
If you are having receiver or call volume issues with your iPhone, you may find the following article helpful:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Regards,
- Brenden

Need help Creating a translation pattern that adds dial out digits to incoming calls

I came across an article yesterday and it showed the steps how to fix Missed Call/Received Call numbers so that you can dial them from the menu correctly (auto-add a 9, etc.)?
I tried it this morning and came up with this translation pattern:
voice translation-rule 6
rule 1 /^201\(.*\)/ /8\1/
rule 2 /\(..........\)/ /81\1/
voice translation-profile filter_Incoming
translate calling 6
This translation pattern rule 1 adds the dial out character 8 and strips 201 for local calls. Rule 2 adds dial out character 8 and adds 1 for long distance. The purpose of this translation rule is when the ephone receives the phone call the characters 8 and 1 are added so when you quickly need to redial you do not have to edit the number and add 8 for each call.
I tested the translation-rule:
ROUTER-2911#test voice translation-rule 6 9082121231
Matched with rule 2
Original number: 9082121231     Translated number: 819082121231
Original number type: none      Translated number type: none
Original number plan: none      Translated number plan: none
ROUTER-2911#test voice translation-rule 6 2019121231
Matched with rule 1
Original number: 2019121231     Translated number: 89121231
Original number type: none      Translated number type: none
Original number plan: none      Translated number plan: none
ROUTER-2911#
Issue is I am not sure with my inbound call leg if it can even work. We dial out through the SIP Trunk and the incoming is translated to the AutoAttendant on Cisco Unity Express.
voice translation-rule 1
rule 1 /2015552100/ /2003/
voice translation-profile CUE_Voicemail/AutoAttendant
translate called 1
dial-peer voice 9 voip
description **Incoming Call from SIP Trunk**
translation-profile incoming CUE_Voicemail/AutoAttendant
call-block translation-profile incoming BLOCKED-INCOMING
call-block disconnect-cause incoming call-reject
session protocol sipv2
session target dns:nd01-04.fs.SIPPROVIDER.net
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
Can what I am trying to do be done with my current setup?

Hi patldmart012,
The dial-peer 9 that you have attached will not be affected by following config
voice translation-rule 6
rule 1 /^201\(.*\)/ /8\1/
rule 2 /\(..........\)/ /81\1/
voice translation-profile filter_Incoming
translate calling 6
Because you have not applied the translation profile "filter_incoming" on the dial-peer.
Could you please provide the exact call flow?
Along with that, If you are facing issue with calls on SIP Trunk, please collect following debugs in a logging buffer and attach the file. I will analyse it and will get back to you.
debug voip ccapi inout
debug ccsip message
debug voice translation
Debug h225 asn1 (If H323 involved)
Debug h245 asn1 (If H323 involved)
Debug MGCP Packets (If MGCP involved)
Also provide the running config of the GW.
These are verbose debugs, so please collect them in the following manner:
Router(config)# service sequence
Router(config)# service timestamps debug datetime msec
Router(config)# logging buffered 30000000 7
Router(config)# no logging con
Router(config)# no logging mon
Router# Clear log
Router# term no mon
<Enable debugs, then wait for issue to occur.>
Router# term len 0
<Enable session capture to txt file in terminal program.>
Router# Undebug all
Router# sh log
Once i have the logs, i will analyse it and will get back to you.
Regards,
Mudit Mathur

How to fix incoming call!?

Similar Messages

Maybe you are looking for