How to get a new fields information in a report

Hi Experts
I have added new fields as per sdn blog (/people/khalil.serrhini/blog/2010/08/06/charm--new-fields-in-crmdorder-and-crmdnomonitor-reporting-enhancement--part-a) and it's working fine for me.
Now I want the same information in the report. Please help me how i can get the information in the reports.
Thanks & Regards
Venkat

Hello Venkat,
Maybe the note "1525010 Enhance the transaction monitor in ChaRM: new date fields" can help you.
Best Regards,

Similar Messages

How to get the coloumns (fields) width in crystal report

hi,
how to get the coloumns width, date(get and set) and page size in crystal report using ras sdk .
thanks

Thanks

How to add a new field from SQL to report

Post Author: Auburn
CA Forum: .NET
The field I am wanting to add to my report is not an actual field in SQL. The field is actually a calculation done in the Select statement like this: SELECT (SUM(CASE KILSHEET.Contract WHEN 1 THEN ((TOT_CARC_WEIGHT / 100) * 1.75) ELSE 0 END)) AS LSS here is the actual full SELECT: SELECT Sum(KILSHEET.PAY) As Pay, Sum(KILSHEET.Dead_Pay) As Dead_Pay, Sum(KILSHEET.GRADE_PREM) As Grade_Prem, Sum(KILSHEET.SORT_ADJ) As Sort_Adj, Sum(KILSHEET.SLOWS_PAY) As Slows_Pay, Sum(KILSHEET.RESALES_PAY) As Resales_Pay, Sum(KILSHEET.PLANT_CHARGE) As Plant_Charge, Sum(KILSHEET.OTHER_PREM) As Other_Prem, Sum(KILSHEET.NPB) As NPB, Sum(KILSHEET.SLOW_NPB) AS Slow_NPB, Sum(KILSHEET.RESALE_NPB) AS RESALE_NPB, Sum(KILSHEET.NPPC) AS NPPC, Sum(KILSHEET.SLOW_NPPC) AS SLOW_NPPC, Sum(KILSHEET.RESALE_NPPC) AS RESALE_NPPC, Sum(KILSHEET.NUMB_HEAD) AS NUMB_HEAD, Sum(KILSHEET.WEIGHT_FEE) AS WEIGHT_FEE, Sum(KILSHEET.SLOW_WEIGHT_FEE) AS SLOW_WEIGHT_FEE, Sum(KILSHEET.RESALE_WEIGHT_FEE) AS RESALE_WEIGHT_FEE, Sum(KILSHEET.WEIGHT) AS WEIGHT, Avg(KILSHEET.PER_LEAN)AS PER_LEAN, AVG(KILSHEET.ACTUAL_YIELD_PER) AS ACTUAL_YIELD_PER, AVG(KILSHEET.AVG_BACKFAT) AS AVG_BACKFAT, Sum(KILSHEET.TOT_CARC_WEIGHT) AS TOT_CARC_WEIGHT, Sum(KILSHEET.DIY) AS DIY, Sum(KILSHEET.DEAD) AS DEAD, Sum(KILSHEET.SLOWS) AS SLOWS, Sum(KILSHEET.RESALES) AS RESALES, Sum(KILSHEET.CONDEMNED) AS CONDEMNED, Sum(KILSHEET.DEAD_WEIGHT) AS DEAD_WEIGHT, Sum(KILSHEET.CONDEMNED_WEIGHT) AS CONDEMNED_WEIGHT, Sum(KILSHEET.SLOWS_WEIGHT) AS SLOWS_WEIGHT, Sum(KILSHEET.RESALES_WEIGHT) AS RESALES_WEIGHT, SUM((Kilsheet.TOT_Carc_WEIGHT / 100) * MarketPrice.mkprice) As TotalPrice,(SUM(CASE KILSHEET.Contract WHEN 1 THEN ((TOT_CARC_WEIGHT / 100) * 1.75) ELSE 0 END)) AS LSS FROM KILSHEET LEFT OUTER JOIN marketprice ON KILSHEET.Contract = marketprice.contract AND DATEPART(week, KILSHEET.KILLDATE) = marketprice.mkweek AND DATEPART(year, KILSHEET.KILLDATE) = marketprice.mkyear " & condStr + " " + locStr The problem with this is that my report is a Summary report. It has to summarize multiple fields and the LSS calculation only needs to be calculated for certain records, hence the CASE. Is there a way to add the LSS field to the report without it being physically part of the database? I am really struggling with this and any help would be greatly appreciated. I hope I described this ok.

Post Author: blairwheadon
CA Forum: .NET
This is what SQL Expressions are for. I suggest you try using those (visible in the Field Explorer) to capture custom SQL field logic.
Alterantively you could use a SQL command with your hand-written SQL.
Thanks, Blair

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

How to insert the new field to standard scheduling agreement script form.

Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:-   Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of   document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
      document date (field EKPO-AEDAT).
Thanks & Regards
chinnu

open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT&

How to get User Profile Service information on user OTHER THAN current user?

So much information on how to autopopulate information for the current user or the logged in user in InfoPath. But what about other users? What if there's a field that's 99/100 times going to be the same person, but it's not the person that's
logged in?
I would like not just to autopopulate a person field to be a specific user (which is not the current user), but I'd also like to autopopulate surrounding fields for that user's Title and Department.
For instance, consider the following 6 fields.
1. Current User Name:
2. Current User Title:
3. Current User Department:
4. Current User’s Supervisor’s Name:
5. Current User’s Supervisor’s Title:
6. Current User’s Supervisor’s Department:
I know how to get the first three; the internet is swarming with that information.
I'm struggling the last three; searching for this information is impossible without turning up information on current user instead.
The furthest I've gotten so far is to autopopulate Current User's Supervisor's Name by:
1. Show Advanced View on Fields pane
2. Expand my Field (which is really a group) called IT Manager Name
3. Expand what shows up under that which is pc:Person
4. Right click AccountId and choose Properties
5. Set Default value to [our domain]\[IT Manager's ads username]
This solves how to get that 4th field my example list above Current User's Supervisor's Name to autopopulate, but how do I then get the Title and Department from the value I set in step 5 [our domain]\[IT Manager's ads username]? Or is there a different/better
way altogether to go about getting a non-current user's info to autopopulate in InfoPath form fields?
*UPDATE*
I just want to clarify that I'm not asking if there's a way to autopopulate the current user's supervisor. I'm aware that Manager is one of the User Profile service fields. But the point is that I want to have a field in which the current
user fills in a username (different than his or her own), and to have User Profile Service called on that provided username to autopopulate Title and Department in surrounding fields. The question is about how to call information with User Profile Service
on any provided username, specifically what steps to take to set this up in InfoPath Designer.

Have a look at the REST API. You can use the /_api/sp.userprofiles.peoplemanager/getpropertiesfor endpoint to query the user profile service for user profile properties of any user.
The API is documented here: https://msdn.microsoft.com/en-us/library/office/dn790354.aspx and here https://msdn.microsoft.com/en-us/library/office/jj163800.aspx
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

How to get multiple selected fields in list

Hello all,
I am trying to get multiple selected value from a list but i dont know how to get multiple selected fields from a list though AS3.
Actually i want to pass the selected fields to php, so for that i need to get the selections and send to php.
Thankx..

i want to put the selected fields of list in an array through AS3....
actually......i figured it out how to do that...........
Its simple......use
list.selectedItems[index]
and to get the number of items selected......
list.selectedItems.length
simple.....

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to get my new in-car entertainment system to recognise my old 20g iPod by usb connection

how to get my new in-car entertainment system to recognise my old 20g ipod by usb

Hi albri51!
I have an article for you that can help you with that question. The article is about troubleshooting car stereo connections, and can be found right here:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Hope this helps. Thanks for using the Apple Support Communities!
Cheers,
Braden

I need a code for verifiing my emailadress. How do get a new one ?

Photoshop Elements 12
Share
Try to send email directly from Photoshop elements
The program ask for a code to verifiing my emailadress
I need a code for verifiing my emailadress. How do get a new one ?

Check your email. The screen capture says that they sent one to the email address listed.

How to create a new field in a PLD.

Hi,
We are trying to add some new fields in the collection report PLD.
How can we add a new field called "Customer/ Vendor Ref No." in the repetitive area of the PLD.
We need to mention all the PO numbers of the customer when sending the ageing report to them.
Please advice.
Regards,
Jyoti

Hi Jyothi,
I believe you want to create a new database field for one of the SAP's Standard report PLD. If so you can go to that reports PLD and create a new field but you can't display the value as PLD works on the basis of Active Screen, meaning it will only display values which are there in the Active Screen.
So i would suggest you to go for Query and create a print layout for that, or XL Reporter or using Crystal Reports also it is possible.
regards,
Shreyas

How to get the health , performance information and about the services run on devices that have connected to the system center?

Hi All,
I want to know how to get the health , performance information and about the services run on devices that have connected to the system center to my c# application. Also I need to know about the information of databases that have connected to system center.
I will appreciate your feedback
Thank you

Hi,
You can configure service monitor for the required service on the server
refer below link for how to configure service monitoring
http://www.bictt.com/blogs/bictt.php/2011/03/17/scom-monitoring-a-service-part3
You can use SCOM SDK to connect to the scom server using c# and get required information
http://msdn.microsoft.com/en-us/library/hh329086.aspx
you can find the database in below registry path on management server
HKLM:\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Setup\DatabaseName
Regards
sridhar v

How Do I add new fields to Repeating Frames in existing Report

Hi,
How do I add new fields to Repeating Frames in existing Report. The Report has 2 GRPFR, 1 HDR and 2 Repeating Frames. I would like to add a new field(column) to inner most repeating frame. I added the new golumn to QUERY and GROUPs in Data Model. After adding the new column to inner most Repeating Frame in Layout Model, the Layout model is losing all other frame and it is showing only the modified one.
How do I add new column to repeating frames without disturbeing other frames.
Any hellp will be appreciated!!!!!!!!!!!.
I am using Oracle Reports 6i.
Thanks,
Ravi.

you must work in your layour editor
expand your repeating frames do it more big
for add your new items or field. after you inserted or add, can you put more little your repeating.
too can you to do one copy of one field in your repeating frame and assign it in his source your new item in your data model.
normally i begin with the principal frame and go one by one internally.

How to get u00BBshort descriptionu00AB field in structure u00BBBAPIDFKKCLu00AB in local la

Hello
I wander how to get »short description« field in structure »BAPIDFKKCL« in local language »SK«(Slovakia).
In SMLT transaction I tried several combination of supplementing Language »SK« (with »EN«) none with success.
What do you propose? Which combination of parameters in SMLT for substitution do you propose?

Hi jan Bo ,
Did you check the option expert mode:
If you want to supplement a more precise selection of tables, application tables, for example, use the expert mode of the language supplementation program.
Proceed as follows:
1. Choose the following for the language that you want to supplement: Language u2192 Special Actions u2192 Supplementation (Expert).
2. On the next screen, enter a description of your supplementation. This helps you to recognize the supplementation you have started in the transaction SMLT overview.
3. In the center of the dialog box, you can specify conditions for selecting the tables you want to supplement. These fields are set with SAP defaults, however, you can change them by choosing Change. The default is set so that if you are logged on to client 000, all cross-client and client-specific tables are supplemented in client 000. In other clients, only the client-specific tables in the logon client are selected for supplementation.
4. The tables that you want to supplement appear at the bottom of the screen, according to the selection you made by choosing Select. Each table is shown with its table class, a description, the supplementation mode, and the client in which the table will be supplemented. You can use the appropriate pushbuttons to change this list, however, we recommend this for experienced users only.
You can find this with link :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ac5b5193-0701-0010-45a7-98dd573a6785
under section :
6.2 Language Supplementation................................................................14
6.2.1 Starting Language Supplementation..........................................................................15
6.2.2 Language Supplementation (Expert Mode)................................................................17
Could you please also check the the below post :
Re: Complete Language Supplementation ?
chek the below link for search.... it would also help you for next search
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=supplementingLanguage&adv=true&sdn_author_name=&sdn_updated_on_comparator=GE&sdn_updated_on=&start=11
i also suggest you to check with target client on which you installed language at last.
Regards,
S.Manu.

How to get a new fields information in a report

Similar Messages

Maybe you are looking for