How to get email  as ABAP report through SAP.

hi all,
here i am getting one error. i run the program in foreground i am getting mail. but when i run the report in back ground i get mail but contents no data??
whot could be the reason??

do you use fm gui_download /-upload in your prg.?
A.

Similar Messages

  • Work schedule: Approval field for a position - How to get it in ABAP?

    Hi all,
    could you please help me to find out how to get in a ABAP report the value of field Approval
    (RHCSHORA-CPROZT) that is shown in the Work Schedule tab in OM (PPOSE tx), starting
    from a position id? E.g. 100,00 (% of Standard value)
    Thanks in advance, bye.
    Angelo

    Hi,
    Are you asking about staffing Percentage?
    Check Table HRP1001 with relation ship A008 .
    get Weighting Percentage.
    Regards,
    Manoj.

  • How to get recent 5 hours reports on dashboard

    hi folks,
    how to get recent 5 hours reports on dashboard
    if any body know pls help me
    thanks ,
    nataraj kesana

    do you have any time column in your report?
    then add a filter like time_column >= timestampadd(sql_tsi_hour,-5,current_timestamp)

  • How can get emails on all devices?

    How can get emails on all devices? When I read an email on my mac, my iphone doesn't download it. How can I change that setting?? I need to have all emails and all my devices!

    It sounds like your using a POP3 email account versus IMAP. With a POP3 account if you do not have the settings configured to leave email on the server the problem you describe will occur. With Outlook 2010 (on a PC for example) you can go into the account settings and configure to leave email on the server. That way both devices will see the email. Check help for your Mac email program for instructions...
    http://www.serverintellect.com/support/email/outlook-leave-on-server/
    A better solution is if your email provider uses IMAP. IMAP sync email folders between multiple devices. Meaning any device will receive the email, all sent email can be seen on the devices. If you delete email from one device the email is deleted from all the other devices. Check with your email provider to see if they offer IMAP services.
    If they do not your choices are to 1) configure email on the Mac as illustrated in the link above or 2) change email providers to something like Gmail or Outlook.com (as examples).
    Also see this for the iPad...
    Using a POP account with more than one device - Apple Support
    FWIW I use Cox IMAP email and fully sync email between a Win 8.1 Update 1 laptop, a Win 7 desktop, an iPad 4, an iPhone 4 and an iPhone 5S.

  • How to get the complete abap help file

    hi
    how to get the complete abap help file i mean F1 file.
    please provide some me links to download that file.

    Hi Kiran,
       If u want complete help for particular topic ; for that SAP has provided in built Transaction for help.
    Transaction is ABAPDOCU.
    I have certain link which will help u.
    SAP, ABAP interview question and answers
    http://www.geocities.com/sap_interviewquestions/
    IMP Link for All
    http://www.geocities.com/SiliconValley/Campus/6345/abapindx.htm
    Common Links
    http://www.sappoint.com/abap.html
    http://www.sap-img.com/abap-function.htm
    http://www.easymarketplace.de/online-pdfs-q-s.php
    http://help.sap.com/
    http://sapassist.com/groups/groups.asp?v=sap-r3-dev&m=3&y=2004
    http://training.saptechies.com/sap-basis-certification-sample-questions/
    http://www.geocities.com/mpioud/Abap_programs.html
    http://cma.zdnet.com/book/abap/index.htm
    http://www.sapdevelopment.co.uk/
    http://www.sap-img.com/
    http://juliet.stfx.ca/people/fac/infosys/abap.htm
    http://help.sap.com
    http://www.sap-img.com
    http://www.thespot4sap.com
    http://www.sap-basis-abap.com/
    http://www.sapdevelopment.co.uk/
    http://www.sap-img.com/
    http://juliet.stfx.ca/people/fac/infosys/abap.htm
    http://help.sap.com/saphelp_46c/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/d6/0db357494511d182b70000e829fbfe/frameset.htm
    http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
    http://www.sapgenie.com/abap/example_code.htm
    http://www.geocities.com/SiliconValley/Campus/6345/abapindx.htm
    http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
    http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
    http://www.sap-img.com/abap-function.htm
    http://www.sapgenie.com/abap/code/abap19.htm
    http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
    http://www.planetsap.com/Tips_and_Tricks.htm
    http://help.sap.com/saphelp_40b/helpdata/ru/d6/0dc169494511d182b70000e829fbfe/applet.htm
    http://www.henrikfrank.dk/abapexamples/SapScript/symbols.htm
    http://www.henrikfrank.dk/abapexamples/index.html
    http://sap.ittoolbox.com/documents/document.asp?i=752
    http://members.aol.com/_ht_a/skarkada/sap/
    http://sappoint.com/abap/
    http://members.tripod.com/abap4/SAP_Functions.html
    http://members.ozemail.com.au/~anmari/sap/index.html
    http://www.planetsap.com/Userexit_List.htm
    http://www.planetsap.com/Tips_and_Tricks.htm
    http://www.kabai.com/abaps/q.htm
    http://www.planetsap.com/Userexit_List.htm
    http://help.sap.com/saphelp_bw21c/helpdata/en/c4/3a8090505211d189550000e829fbbd/frameset.htm
    http://www.sapgenie.com/abap/bapi/example.htm
    http://help.sap.com/saphelp_45b/helpdata/en/65/897415dc4ad111950d0060b03c6b76/content.htm
    http://www.sap-basis-abap.com/index.htm
    http://help.sap.com/saphelp_40b/helpdata/en/fc/eb2c46358411d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/aa/aeb23789e95378e10000009b38f8cf/frameset.htm
    http://www.geocities.com/ResearchTriangle/1635/system.html
    http://www.sapdesignguild.org/resources/MiniSG/3_Managing/3_Functions_Table_Control.htm
    http://help.sap.com/saphelp_45b/helpdata/en/d1/801bdf454211d189710000e8322d00/content.htm
    http://www.sapfans.com/sapfans/repos/saprep.htm
    http://www.planetsap.com/howdo_a.htm
    http://help.sap.com/saphelp_util464/helpdata/en/69/c2516e4ba111d189750000e8322d00/content.htm
    http://www.sapgenie.com/abap/smartforms_detail.htm
    http://www.sap-img.com/abap.htm
    http://help.sap.com/saphelp_46c/helpdata/en/fc/eb2d67358411d1829f0000e829fbfe/content.htm
    http://www.geocities.com/victorav15/sapr3/abap.html
    http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
    http://abap4.tripod.com/Other_Useful_Tips.html
    http://help.sap.com/saphelp_45b/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
    http://www.sap-basis-abap.com/sapmm.htm
    http://sap.ittoolbox.com/nav/t.asp?t=303&p=448&h1=303&h2=322&h3=448
    http://sapfans.com/
    http://cma.zdnet.com/book/abap/ch03/ch03.htm
    http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
    http://sappoint.com/abap/
    http://www.henrikfrank.dk/abapuk.html
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
    http://www.sapgenie.com/abap/index.htm
    http://www.sap-img.com/abap.htm
    http://www.sapdevelopment.co.uk/tips/tipshome.htm
    http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
    http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
    http://sap.ittoolbox.com/nav/t.asp?t=448&p=448&h1=448
    http://www.thespot4sap.com/
    http://www.kabai.com/abaps/q.htm
    http://www.geocities.com/mpioud/Abap_programs.html
    http://www.sapgenie.com/abap/tips_and_tricks.htm
    http://www.sapassist.com/code/d.asp?whichpage=1&pagesize=10&i=10&a=c&o=&t=&q=&qt=
    Mark Helpfull answrs
    Regards
    Manoj

  • ABAP Reports and SAP Query

    Hi Experts,
    I have question regarding ABAP Reports, SAP Query, and Transaction with variant.  How are we securing one the above reports that we assign them through pfcg.  We can secure custom program by custom transaction or define the auth group in S_PROGRAM auth object but in this case we have to assign SA38 in production. is that correct?
    Please help me understand difference between the ABAP reports and SAP query. Is the ABAP reports same as Program or they are different.
    Thanks in advance
    Faisal
    Edited by: Faisal on Jun 30, 2009 11:06 PM

    Hi,
    1) End user security (role matrix coordinate with process team)
    This role Matrix design is most important where we can put restrictions and use SoD.
    2) Secure Table (by auth group)
    Table TDDAT and use of transaction se54 for security tables to right auth Groups. Secure s_tabu_dis, s_tabu_cli.
    3) Secure program (as you said ABAP reports are referred to Program)
    Use of table TPGP and program RSCSAUTH for assignment of groups to Program. SA38 Running of SA38 requires a minimum SUBMIT in user Action. A user having SA38 is dangerous as he/she is now enabled to run any report. Hence protection in Auth Group is needed. Verify each and every program is having authority check statement and Auth Group or not before assigning sa38. As you mentioned its best to avoid SA38 and create CUSTOM TXN for each report.
    (We should also SECURE S_DEVELOP in Production properly along with ur points. Please Note).
    4) Secure some batch jobs roles for batch job
    Secure by s_btch* objects and less access to se36.
    5) Create support roles for cutover activity during Go-live
    That is always needed. Go ahead.
    6) Emergency roles & IT roles for support
    This is very much needed as a role of Mitigation and Fire Fighting for Temporary access. Ensure to enable ur audit parameters in RZ10 (rsau* sm20,RSLG* for sm21). Give emergency access but enable audit via sm19 and get audit reports from sm20 and sm21 immediately after the use of emergency access.
    There are also other auth objects we need to be care ful which is a long list and hope every body ensures that (s_cts,a_admi,s_trans, tables ssm_cust, prgn,t000) etc and a host of others. Besh wishes. Let us know if any issue.
    Regards
    Aveek.

  • Update ABAP Report in SAP R/3 with data from xMII

    Hi Experts,
    How do we update some PP reports in SAP R/3 from xMII .
    We have sucessfully got all the data from the historians in the plant and also established connection between SAP R/3 and xMII.
    1. We also need to store the data passed in SAP R/3 in a Z-table and fetch data from there.
    2. How the BLS in xMII can be called from SAP R/3 to update the table.
    Thanks in advance.
    Regards,
    [Vivek K|https://forums.sdn.sap.com/profile.jspa?userID=2097685]

    Vivek,
    You can very well do this using a remote enabled function module.  For this,
    1) Write a function module which takes input (tag name & value) and inserts in z table.
    2) Set it remote enabled.
    3) Define your SAP server under data services - > SAP Server Configurations.
    3) Write a BLS transaction which calls this RFC using SAP JCO action. Here you can use the configuration that you defined in earlier step. Set the input parameters.
    4) Execute the transaction and you can put an external breakpoint in your RFC for debugging.
    I think when you said you are getting data xacute query, even that will execute such kind of BLS transaction.
    Mike.

  • Need knowledge on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

    please give me some ideas and useful links on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

    Hi Jaya,
    Not very clear with your question.
    Are you looking for changes in areas od ABAP reports & SAP query when we upgrade SAP from 4.7 to ECC 6.0 ??
    If the response is YES, then please refer to SAP solution browser www.sapsolutionbrowser.com
    Define source release and target release .
    You will get module wise details on new features for target release.
    Hope this helps.
    Regards,
    Deepak Kori

  • How to manage pulp and paper  processing through SAP

    Hi...
    please let me know how to manage pulp and paper  processing through SAP-PP in details......
    or please provide sum links where i can get the solution....
    regards,
    sandeep.

    Hi Ema,
    you need to ensure in your BAdi implementation that the records do not overlap. Ideally (for performance reasons) you also keep the number of records in RPM_BUPA_AVL low
    i.e. one record for 01.Jan to 05 Jan with 8 hours is better compared to 5 records with 8 hours each.
    Best regards
    Thorsten

  • Sending email with HTML report through a button

    Hi,
    I've noticed in APEX 4 there is a default option (through Action Menu -> Download Formats: email) to send an email with report in HTML format...
    may I know how to accomplish it using a Button... seems like APEX is using javascript:gReport.email.show(); function to accomplish it but I don't know how to implement it...
    Please advice
    Thanks in advance

    qwe12654 wrote:
    GokhanAtil,
    I've posted a sample on APEX.ORACLE.COM... LOGIN DETAILS ARE SAME AS ABOVE...
    ON the page now I have both the SQL based report and interactive report...
    On the top right you may see 2 icons.. one for downloading report in PDF (using SQL Report as the source) and the second for sending email (using interactive report, similar logic as what you've recommended)...
    Is there a way I may be able to send report via email, using SQL report as the source (rather than interactive report)...?
    You can always use APEX_MAIL to send emails.
    http://download.oracle.com/docs/cd/E10513_01/doc/apirefs.310/e12855/apex_mail.htm
    or the alternative option would be:
    to convert all my SQL reports into interactive, would require a bit of efforts (I'll go with it if the above option is not available)... but would need to know how to download INTERACTIVE reports in PDF, excel and CSV formats using a button ... similar logic to what you've done for sending emails
    Thanks again for all your assistanceIt's very easy to make buttons for downloading the interactive reports in HTML, CSV or PDF.
    I have created a PDF button and put the link:
    http://apex.oracle.com/pls/apex/f?p=40418:11:1316531694094700:PDF
    "1316531694094700" is the value of p_instance. You can find it from HTML codes of your page:
    <input type="hidden" name="p_instance" value="1316531694094700" id="pInstance">
    You can change PDF to CSV or HTMLD (so your visitor download the report in CSV or HTML)
    Best Regards,
    Gokhan
    If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

  • Generate email from ABAP report.

    Hi Folks,
    I would like to know if it is possible to send email from to an external mail id from an ABAP report.
    If it is possible then what are detailed steps that needs to be taken in order to achive it. Also let me know how to attach files to the created email.
    Thanks,
    Imran

    FAQ, please search the forums before posting, do not ask the same question once again.
    Thread locked.
    Thomas

  • Can't get emails,but can send through Mail

    I just got Roadrunner and I cannot get emails in the Mail program. RR says it is a Mac Mail problem. I can send emails through Mail. I do get emails through Webmail but really want to use the Mail program. It worked with my Earthlink account. I have rebuilt the account and have the settings in Mail correct. Are there other settings I need to set on the Mac?
    Thank you for any help.

    No, a combination of letters and numbers. I just noticed that the email address for me on webmail is @adelphia.net, [email protected] That is not how Mail is set up nor is that the email address I was given. I was never with any Adelphia internet service. It is strange.

  • How to get parameter value from report in event of value-request?

    Hi everyone,
    The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
    many thanks!
    Jack

    You probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
    Jonathan
    report zlocal_jc_sdn_f4_value_read.
    parameters:
      p_field(10)           type c obligatory,  "field with F4
      p_desc(40)            type c lower case.
    at selection-screen output.
      perform lock_p_desc_field.
    at selection-screen on value-request for p_field.
      perform f4_field.
    *&      Form  f4_field
    form f4_field.
    *" Quick demo custom pick list...
      data:
        l_desc             like p_desc,
        l_dyname           like d020s-prog,
        l_dynumb           like d020s-dnum,
        ls_dynpfields      like dynpread,
        lt_dynpfields      like dynpread occurs 10.
      l_dynumb = sy-dynnr.
      l_dyname = sy-repid.
    *" Read screen value of P_FIELD
      ls_dynpfields-fieldname  = 'P_FIELD'.
      append ls_dynpfields to lt_dynpfields.
      call function 'DYNP_VALUES_READ'
        exporting
          dyname     = l_dyname
          dynumb     = l_dynumb
        tables
          dynpfields = lt_dynpfields
        exceptions
          others     = 1.
      check sy-subrc is initial.
    *" See what user typed in P_FIELD:
      read table lt_dynpfields into ls_dynpfields
        with key fieldname = 'P_FIELD'.
    *" normally you would then build your own search list
    *" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
    *" but this is just a demo of writing back to the screen...
    *" so just put the value from p_field into P_DESC plus some text...
      concatenate 'This is a description for' ls_dynpfields-fieldvalue
        into l_desc separated by space.
    *" Pop a variable value back into screen
      clear: ls_dynpfields.
      ls_dynpfields-fieldname  = 'P_DESC'.
      ls_dynpfields-fieldvalue = l_desc.
      append ls_dynpfields to lt_dynpfields.
      call function 'DYNP_VALUES_UPDATE'
        exporting
          dyname     = l_dyname
          dynumb     = l_dynumb
        tables
          dynpfields = lt_dynpfields
        exceptions
          others     = 0.
    endform.                                                    "f4_field
    *&      Form  lock_p_desc_field
    form lock_p_desc_field.
    *" Make P_DESC into a display field
      loop at screen.
        if screen-name = 'P_DESC'.
          screen-input = '0'.
          modify screen.
          exit.
        endif.
      endloop.
    endform.                    "lock_p_desc_field

  • How to get total in ALV report in same Internal table?

    Data : Begin of it_data,
            kunnr type kunnr,
            name1 type name1,
            amt1  type btrt01, " CURR 15,2
           end of it_data.
    loop at it_data into wa_data
    endloop.      
    Hello friends,
    I am developing one ALV report with 20 rows.
    I have filled one internal table with some fileds like amount.
    I want to get total of all amount1 in AMT1 field.
    So, How to get total of amount in same internal table in ALV report ?
    It is ok if i get duplicate rows in internal table.
    Points 'll be awarded soon.
    Regards,
    NVM

    Hi Ronny,
    the alv output will display the sum at the last row.
    for this functionality u have do this logic.
    data: lw_fcat type slis_fieldcat_alv.
    data: lt_fcat type slis_t_fieldcat_alv/
    wa_fcat-fieldname = 'AMT1'.
    wa_fcat-tabname = 'ITAB'.
    wa_fcat-do_sum = 'X'.
    append wa_fcat to lt_fcat.
    and then pass it to reuse_alv_grid_display function,
    regards,
    Santosh Thorat

  • How to show Headers in ABAP report

    hii folks,
    plz try to solve my quesions:
    hw to show  two Headers in ABAP report output, like
    eg:
    for first two fields(vendor  A/C no. vendor name ) i have to shw header name like VENDOR  PR. DETAILS & for the nxt following fields(vendor city, state, country)i have to shw VENDOR ADDRESS.(plz gv a exaple)
    2Q) A  INISILIZATION event in report hw many times it triggers.
    3Q) In a ALV report once i double click on a selected record it has to shw its corresponing details.for(DOUBLE CLICK what we use & where i have to defind it)
    thanking u
    sweta.

    1. Please let me know whether it is for Classic list report or ALV.
    2. Initilization is triggered only once when the report is loaded to memmory.
    3.
    3.1.) Declare user_command in events:
    DATA: ls_event type slis_alv_event.
    move 'USER_COMMAND' to ls_event-form.
    append ls_event to gt_events.
    3.2.) Getting cell value ." within the form USER_COMMAND:
    FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
    RS_SELFIELD TYPE SLIS_SELFIELD.
    Check function code
    CASE R_UCOMM.
    WHEN '&IC1'. "--> check your own sy-ucomm once you double click the line item
    Check field clicked on within ALVgrid report
    IF RS_SELFIELD-FIELDNAME = 'EBELN'.
    Read data table, using index of row user clicked on
    READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
    ENDIF.
    ENDCASE.
    ENDFORM.
    For More details, please refer to following threads.
    Re: Drill down report
    double click on cell in alv report
    Regards,
    Lijo Joseph
    *reward if useful

Maybe you are looking for