How to get WAN DNS when set up Airport Extreme on Windows

I am trying to set up my home network by using Airport Extreme Base to connect DSL via PPPoE. Here's what I did:
1. Update firmware to latest version: V5.7;
2. Install Airport Setup 4.2;
3. Run Setup Assistant, enter the right DSL account and password by using PPPoE, also setup base name, network name and base password, and DSL service provider's DNS ip, backup DNS ip;
4. Everything gets updated into base station, restarted, local wireless network set up successfully, but can not connect to WAN;
5. Tried ipconfig/all, find DNS is 192.168.1.1;
6. Tried to dial DSL from computer via PPPoE directly, validated account and password is ok, and it is working well to get me to internet.
Can someone here help me solve my issue?
Dell D600 Windows XP Pro

I figure out answer by myself now. I would like to share it with you all here: firmware V5.7 has some major bug causes the problem. When I update my base station with firmware V5.5.1, it works right away.

Similar Messages

Issue with WAN Miniport when setting up VPN server in Windows 7

I tried making my computer a VPN server by setting up a "New incoming connection" under network connections within Network and sharing center. Originally, it did complete but did not show any WAN Miniport connections. I could not connect to this VPN
with my other computer.
What I've done so far:
I "updated" all the WAN Miniports in Device Manager to "MAC Bridge Miniport" driver (since I could not uninstall them as they were) and then proceeded to uninstall all the WAN miniports. I rebooted my computer and then the device
drivers tried to install automatically but only a few installed successfully.
I then downloaded the latest WDK (8.1) and tried re-installing all the WAN Miniports via devcon.exe with the command "devcon.exe install c:\windows\inf\netrasa.inf MS_PptpMiniport". It said that the node was created but it failed to install the
drivers. I rebooted my computer but some of these mini ports appeared as "Unknown" in Device Manager while others appeared with their names but with numbers attached since I've attempted this a few times, Ex: "WAN Miniport (IP) #3".
from my understanding, I need at least WAN Miniport pptp to be working for VPN to work. I don't know what to do at this point. Any help is greatly appreciated. Thanks in advance.
Gateway DX4822-01 Desktop PC
Windows 7 64-bit, SP1

Hi,
Please try to use Incoming connection troubleshooter to fix this problem for test. If it identify any problem that couldn't fix this problem, please provide the error message here.
Control Panel\All Control Panel Items\Troubleshooting\All Categories
Roger Lu
TechNet Community Support

How to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar?

I was wondering how to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar? If I change a location in mavericaks it is updated in my iOS 7 calendar, but if I add travel time to an appointment, that does not show up on my iphone. This seems like a big miss for apple if this is the case. I could maybe understand not adding the ability to add travel time in iOS 7, but not being able to see the travel times you set up seems very incomplete. Any ideas or insight?

Hello Cheer,
I don't believe the table changed when migrating from Access. I had two tables before the migration, one was for the SwitchBoard Manager and the other table was for the database table. I used the Switchboard to navigate to different menus, such
as the Main Form, Power Form, Server Form, etc. Let me know if I can provide any other information to help you narrow this down for me.
Thank you for your assistance.
Thai

Xml: how to get node value when pasing node name as a parameter

Hi,
I've got some xml:
var xmlData:XML =
<1stNode>
    <buttonID>first child node value</buttonID>
    <imageID>second child node value</imageID>
    <labelID>third child node value</labelID>
</1stNode>
Then I want to read specific node value based on a value passed to a function. .
var buttonID = new Button;
var imageID = new Image;
var labelID = new Label;
getNodeValue(buttonID); //the value here is set dynamically
private function getNodeValue (nodeName:String):void {
trace (xmlData.nodeName)                      //doesn't work
var str:String = "xmlData." + nodeName;
var xml:XMLList = str as XMLList             //doesn't work
I'm don't know how to get the value when node name is dynamically changed.

use:
getNodeValue(buttonID); //the value here is set dynamically
private function getNodeValue (nodeName:String):void {
trace (xmlData[nodeName])

My time machine backup external hard drive has failed. I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it?

My time machine backup external hard drive has failed. I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it

http://pondini.org/TM/21.html

How to get the path when i select a directory or a file in a JTree

How to get the path when i select a directory or a file in a JTree

import java.lang.*;
import java.io.*;
import javax.swing.*;
import javax.swing.tree.*;
import java.awt.HeadlessException;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.util.Iterator;
* @author Frederic FOURGEOT
* @version 1.0
public class JTreeFolder extends JPanel {
protected DefaultMutableTreeNode racine;
JTree tree;
protected JScrollPane scrollpane;
final static int MAX_LEVEL = 1; // niveau max de descente "direct" dans l'arborescence
* Sous-classe FSNode
* @author Frederic FOURGEOT
* @version 1.0
private class FSNode extends DefaultMutableTreeNode {
File file; // contient le fichier li� au noeud
* Constructeur non visible
private FSNode() {
super();
* Constructeur par initialisation
* @param userObject Object
FSNode(Object userObject) {
super(userObject);
* Constructeur par initialisation
* @param userObject Object
* @param newFile File
FSNode(Object userObject, File newFile) {
super(userObject);
file = newFile;
* Definit le fichier lie au noeud
* @param newFile File
public void setFile(File newFile) {
file = newFile;
* Renvoi le fichier lie au noeud
* @return File
public File getFile() {
return file;
public JTree getJTree(){
     return tree ;
* Constructeur
* @throws HeadlessException
public JTreeFolder() throws HeadlessException {
File[] drive;
tree = new JTree();
// cr�ation du noeud sup�rieur
racine = new DefaultMutableTreeNode("Poste de travail");
// cr�ation d'un noeud pour chaque lecteur
drive = File.listRoots();
for (int i = 0 ; i < drive.length ; i++) {
FSNode node = new FSNode(drive, drive[i]);
addFolder(drive[i], node); // on descend dans l'arborescence du lecteur jusqu'� MAX_LEVEL
racine.add(node);
// Gestion d'evenement sur JTree (on �coute les evenements TreeExpansion)
tree.addTreeExpansionListener(new TreeExpansionListener() {
public void treeExpanded(TreeExpansionEvent e) {
// lorsqu'un noeud est ouvert
// on descend dans l'arborescence du noeud jusqu'� MAX_LEVEL
TreePath path = e.getPath();
FSNode node = (FSNode)path.getLastPathComponent();
addFolder(node);
((DefaultTreeModel)tree.getModel()).reload(node); // on recharche uniquement le noeud
public void treeCollapsed(TreeExpansionEvent e) {
// lorsqu'un noeud est referm�
//RIEN
// alimentation du JTree
DefaultTreeModel model = new DefaultTreeModel(racine);
tree.setModel(model);
     setLayout(null);
// ajout du JTree au formulaire
tree.setBounds(0, 0, 240, 290);
scrollpane = new JScrollPane(tree);
     add(scrollpane);
     scrollpane.setBounds(0, 0, 240, 290);
* Recuperation des sous-elements d'un repertoire
* @param driveOrDir
* @param node
public void addFolder(File driveOrDir, DefaultMutableTreeNode node) {
setCursor(new Cursor(3)); // WAIT_CURSOR est DEPRECATED
addFolder(driveOrDir, node, 0);
setCursor(new Cursor(0)); // DEFAULT_CURSOR est DEPRECATED
* Recuperation des sous-elements d'un repertoire
* (avec niveau pour r�cursivit� et arr�t sur MAX_LEVEL)
* @param driveOrDir File
* @param node DefaultMutableTreeNode
* @param level int
private void addFolder(File driveOrDir, DefaultMutableTreeNode node, int level) {
File[] fileList;
fileList = driveOrDir.listFiles();
if (fileList != null) {
sortFiles(fileList); // on tri les elements
// on ne cherche pas plus loin que le niveau maximal d�finit
if (level > MAX_LEVEL - 1) {return;}
// pour chaque �l�ment
try {
for (int i = 0; i < fileList.length; i++) {
// en fonction du type d'�l�ment
if (fileList[i].isDirectory()) {
// si c'est un r�pertoire on cr�� un nouveau noeud
FSNode dir = new FSNode(fileList[i].getName(), fileList[i]);
node.add(dir);
// on recherche les �l�ments (r�cursivit�)
addFolder(fileList[i], dir, ++level);
if (fileList[i].isFile()) {
// si c'est un fichier on ajoute l'�l�ment au noeud
node.add(new FSNode(fileList[i].getName(), fileList[i]));
catch (NullPointerException e) {
// rien
* Recuperation des sous-elements d'un noeud
* @param node
public void addFolder(FSNode node) {
setCursor(new Cursor(3)); // WAIT_CURSOR est DEPRECATED
for (int i = 0 ; i < node.getChildCount() ; i++) {
addFolder(((FSNode)node.getChildAt(i)).getFile(), (FSNode)node.getChildAt(i));
setCursor(new Cursor(0)); // DEFAULT_CURSOR est DEPRECATED
* Tri une liste de fichier
* @param listFile
public void sortFiles(File[] listFile) {
triRapide(listFile, 0, listFile.length - 1);
* QuickSort : Partition
* @param listFile
* @param deb
* @param fin
* @return
private int partition(File[] listFile, int deb, int fin) {
int compt = deb;
File pivot = listFile[deb];
int i = deb - 1;
int j = fin + 1;
while (true) {
do {
j--;
} while (listFile[j].getName().compareToIgnoreCase(pivot.getName()) > 0);
do {
i++;
} while (listFile[i].getName().compareToIgnoreCase(pivot.getName()) < 0);
if (i < j) {
echanger(listFile, i, j);
} else {
return j;
* Tri rapide : quick sort
* @param listFile
* @param deb
* @param fin
private void triRapide(File[] listFile, int deb, int fin) {
if (deb < fin) {
int positionPivot = partition(listFile, deb, fin);
triRapide(listFile, deb, positionPivot);
triRapide(listFile, positionPivot + 1, fin);
* QuickSort : echanger
* @param listFile
* @param posa
* @param posb
private void echanger(File[] listFile, int posa, int posb) {
File tmpFile = listFile[posa];
listFile[posa] = listFile[posb];
listFile[posb] = tmpFile;

I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks

I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks

You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
Best of luck.

How to get a confirmation when your email is delivered or read ?

With Mail app ,How to get a confirmation when your email is delivered or read?

When I send mail with Mail app , there is flying letter pops up. But now I could not see anymore. Do you know how can I active that animation ?
Thanks for your help

How to get the tab when is it pressed?

I have the following situation:
I have an array of JTextField inside a scroollpane. The size of my array is nine or ten depends on some rules. But my window show just four JTextField. So I would like to know how to get the event when I press "tab", just to show the others JTextField while I'm pressing "tab". Because I need this event to scrooll down or scrooll up.
I tried the keylistener, but when I press "tab" any method(keypressed, keyreleased, keytyped) is called.
I also tried the focuslistener. If this event I could scrooll down or scrooll up, but I couldn't do both!!
Can somebody help me??
Thanks anyway!!
Gin

JTextField implements Scrollable interface, which provides information to the enclosing container such as JScrollPane.
Hence when the tab event is fired, you can compute the Rectangle area that should be visible and then call the 'scrollRectToVisible()' method in JTextField. This will inform the JScrollPane to scroll to the rectangle that you mention.
HTH

Can anyone tell me how to remove the owner when setting the location

Hello,
Can anyone tell me how to remove the owner when setting the location?
Properties
   Table Name: (Table Name)
   Table Type:   Tables
   Owner:           Public
   Overridden Qualified Table Name: (Table Name - same as above)
Any help would be appreciated.
Thanks
Ann

Hi Ann,
please check this document to determine the correct space for your question:
Find Topic Spaces on SCN (Forums)
If you need help moving it, let me know!
Thanks,
Kristen

How to get an email when data got inserted

Hi All,
Could you please let me know how to get an email when data got inserted into table by using sql/plsql
Thanks in adavance

Could you please let me know how to get an email when data got inserted into table by using sql/plsql
Well that seems pretty straightforward - write some pl/sql to send you an email when that pl/sql inserts data into a table.
See this Oracle-base article for an example of sending mail.
http://www.oracle-base.com/articles/misc/email-from-oracle-plsql.php
Post what you have tried so far. What part of what you have tried doesn't seem to be working?

How do you set up a password for a wireless network when using an Airport Extreme?

How do you set up a password for a wireless network when using an Airport Extreme wireless router?

Thanks for the updated information.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Manual Setup
Click the Wireless tab below the row of icons
Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
Enter a Wireless Password and Verify Password
Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to set up airport extreme with TPG ADSL2 ?

How to set up airport extreme with TPG ADSL2 ?

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to get the absolute path of logicalhost server domain on Windows?

My logicalhost server domain behaves strangely. I am reading a file from collaboration definiton, that is located in the logicalhost/is/domains/domain1/config folder. I thought, that this folder is used as an application root folder so I can read files like ./file from there. And it worked.
But then I've installed the domain as a Windows service, restarted the PC. When the domain1 gets started, I get exceptions saying that the file can't be found. Then I restart the domain (in domainmgr.bat) and it works again.
I am pretty sure that using the absolute path will solve this issue, so my first question is: How to get the absolute path of logicalhost server domain on Windows?
And my second question is: Why does this happen?

The default folder for a Windows Service is the system32 folder contrary to the instance root folder when starting it as a normal process.
That's the why, haven't tried the how, but you should be able to get the value by calling System.getProperty("com.sun.aas.instanceRoot").
Hope this helps
Paul

How to get WAN DNS when set up Airport Extreme on Windows

Similar Messages

Maybe you are looking for