FM to get work center information from routing
Hi all,
Is there any FM to get work center information from routing?
Points assured.
Thanks and regards,
Nilesh
Use This FM
CR_WORKSTATION_READ_ROUTING,ROUTING_DISPLAY
Use table CRHD ,MAPL
Please reward if useful.
Similar Messages
-
Read Routing and work center details from transfer order
Hello
I am using transaction LT31 to print a form for the transfer order.
The customer wants me to print a field that is in the work center details of the routing for this material and plant.
I can see this data with transaction CA02 where i enter material and plant,and then the work centers are beeing displayed.From here i can double click on the work center and see the field Supply area that i have to print.
My answer now is,how to read details on the work center starting from my transfer order number.Which is the table connection between transfer order table LTAK and the tables where i can find the work center details.
Thank youI have found the solution:
ltak-tanum = mseg-tbnum
read aufnr from mseg and go to afko
mseg-aufnr = afko-aufnr
read plnnr from afko and go to plpo
afko-plnnr = plpo-plnnr
from plpo read arbid and go to crhd
plpo-arbid = crhd-objid
from here,we can find the arbpl and the field that i was looking for PRVBE -
How can I get CDP neighbor information from access point reports in Cisco Prime 2.0
How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in there, however I cannot seem to find it.
Thanks in advance!Hi
You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
Regards
Rasika
**** Pls rate all useful responses **** -
Hello,
When implementing a VDI solution, I'm getting an error on our virtualization host server. The error is:
Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [VDI-PC].
Hresult 0x8000FFFF
Event ID 8467, Severity: Warning, Source: Microsoft-Windows-TerminalServices\TSV\VmHostAgent
This error happens every time a user or admin connects to a VDI desktop. This is a fresh install of Remote Desktop Services on completely fresh servers. This is in testing and we have not ever had it working before without the error.
Topolgy: Server2012 R2, Windows 7
Srv-RDCB1: Is the connection broker and Web Access server. It is Virtualized thru Hyper=V.
Srv-RDVH1: Is the virtualization host. It is a physical server. It also has a separated hyper-v role (for RDS VDI deployment).
Everything seems to be functional other than this error in the log, and I haven't found any information on what this could mean.
Any help is greatly appreciated, thanks!Hello. I have this trouble too.
All roles on one server.
Deployment type - Quick start
Deployment Scenario Virtual mashine-based desktop deplyment
Reinstall all roles 2 times
Warning TerminalServices-TSV-VmHostAgent
8467 Orchestration
Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [per-0] .
Hresult: 0x8000FFFF
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TerminalServices-TSV-VmHostAgent" Guid="{92618A87-2F6A-4B75-9AE2-E77BE7EAF43C}"
/>
<EventID>8467</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>22</Task>
<Opcode>14</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-11T13:24:45.579138000Z" />
<EventRecordID>1655</EventRecordID>
<Correlation
ActivityID="{F4200EF7-FEDD-4CAD-9F5D-6219A5F30000}" />
<Execution ProcessID="3164" ThreadID="13164" />
<Channel>Microsoft-Windows-TerminalServices-TSV-VmHostAgent/Operational</Channel>
<Computer>blade2.vzfei.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<EventXML xmlns="Event_NS">
<param1>per-0</param1>
<param2>0x8000ffff</param2>
</EventXML>
</UserData>
</Event>
In RD Gateway Manager, right-click on the RD RAP and click Properties. On Network Resources tab select
“Allow users to connect to any network resource”.
not work. -
How to get RMAN catalog information from Target database?
Hi,
How to get RMAN catalog information from Target database because i don't know about catalog database? is it possible?
ThanksIf you run RMAN backups of a target database using a Catalog schema in another database, the target is not aware of the catalog.
The RMAN backup script would have the connection identifier for the Catalog.
Hemant K Chitale -
Received new mac how do you get all your information from old mac?
Received a new mac for my daughter. How do you get all the information from old mac?
Your best bet, by far, is to use Setup Assistant when your shiny new Mac first starts up (not Migration Assistant later).
See How do I set up a new Mac from my old Mac or its backups? -
Designing Work Center & Assigning in Routing For Textile Industry
Dear All
There are around 20 Looms in weaving.As per clients requirement to map indvidual Loom efficiency each loom is considered as indvidual work center.In routing its possible to assign only one work center.
Kindly suggest me how to map this scenerio.The client requires machine wise output.Should i raise 20 Production orders for indvidual Work centers.
Regards
Jayhi,
i am sending the information about
Maintaining Individual Capacities in the workcenter,
Prerequisites
Individual capacities are used in capacity planning for more detailed resource planning. For instance, you can divide a machine capacity into several individual machines and maintain an available capacity for each machine. Capacity requirements can then be distributed among the individual capacities. If you do not maintain an available capacity for an individual capacity, it is calculated from the operating time of the capacity to which the individual capacity has been assigned.
Individual capacities have the same capacity categories as the capacities to which they are assigned.
In order to be able to create individual capacities the CapCatPers indicator for the capacity category must not be set in Customizing.
Procedure
Assigning Individual Capacities
On the header screen choose Goto ® Individual capacities.
The Assignments to Individual Capacities screen appears.
Define the individual capacities.
Maintaining Available Capacities for Individual Capacities
In the Assignments to Individual Capacities screen place the cursor on the individual capacity whose available capacity you want to maintain.
If the Maintnd indicator has been set, then an available capacity has been maintained for this individual capacity.
thanks
sbabu -
Getting IP Address information from an NSNetService object
I have an NSNetService object that I received from doing a Bonjour discovery. This object represents a web server that I want to connect to.
I have the following (nasty) code for doing that:
- (void) serviceReceived:(BonjourViewController*)bvc didResolveInstance:(NSNetService*)ref;
if (ref == nil) {
// The resolve was cancelled.
return;
NSArray* addressArray = [ref addresses];
if ([addressArray count] == 0) {
return;
NSData* address = [addressArray objectAtIndex:0];
void* buffer[[address length]];
[address getBytes:buffer];
int ipAddress = (int) buffer[1];
int classA = ipAddress & 0x000000FF;
int classB = (ipAddress & 0x0000FF00) >> 8;
int classC = (ipAddress & 0x00FF0000) >> 16;
int classD = (ipAddress & 0xFF000000) >> 24;
int port = [ref port];
NSString* hostName = [NSString stringWithFormat:@"%d.%d.%d.%d:%d", classA, classB, classC, classD, port];
NSURL* url = [[NSURL alloc] initWithScheme:@"http" host:hostName path:@"/index.html"];
I can't just use the hostname because it's not a valid DNS entry, and the Bonjour name doesn't work with most of the libraries like:
NSXMLParser *parser = [[NSXMLParser alloc] initWithContentsOfURL:URL];
Oddly enough, Safari is perfectly happy with the Bonjour name "compname.local.".
There must be a better way of getting an NSString with the dotted-quad than getting the bytes and manually picking apart the IP address from them. This code breaks as soon as we all move to IPv6.
Any help would be appreciated,
-Chris.
Message was edited by: clevans
Message was edited by: clevansUse an application bean if you want to keep a list of
all the users stored on a server.
When someone logs on, grab the ip, login name, and
password. Store this in the application scope bean.
Every time a page is accessed, check the ip to see if
it has been previously stored in the bean. If so,
load the login and password and use them for logging
in to the page. If not, include another preset login
page, or lik to it with the previous page stored in a
session scope bean.
The ips, login names, and passwords should be enclosed
in a class (simple one with three fields). When
someone logs on, create a new instance and send it to
the application scope bean, where it should be stored
in a java.util.HashMap (my favorite kind, and really
quick).
There should also be a way to time-out the user after
a while of not connecting - removing their ip from the
application scope bean. Very important if you want
security.
That's all I can think of for now.
Spaceman40Close enough, however I will point out that you don't need to store the password. I am also confused why you are saying an application level bean. This needs to be a bean that can be accessed by all of our applications. If one application creates the bean all of them should be able to see it.
I was thinking of doing this: Each application gets a session bean that looks for an entity bean with the primary key of the client's IP address. If the bean is there it gets the user ID from that and logs that user into the system. If the bean isn't there, it fires off a login procedure for the client to enter their username and password. If the login is successful it creates the bean. The session bean stays around until the user logs out of the system. The last session bean linked to that entity bean destroys it.
Has anyone seen this before? Is there a design pattern for a last one out turn off the light in EJB? -
Work Center Hierarchy and Routing
Hi,
I would like to know what exactly Work Center hierarchy mean?. Where is it used. In Routing, we maintain Sequence of operation along with workcenter where this operations are performed . Would like to know does work center hierarchy is linked to sequence maintained in Routing?. ThanksHi,
Any one can explain me the use of Workcenter Hierarchy?. In Routing, we maintain the sequence of operations. Does Routing and Workcenter Hierarchy has relation?. If Yes, what is the relation between these 2.
Thanks in advance -
My ipod only works 1meter away from router
My ipod touch only works 1meter away from my BT Hub, how far should the wifi signal reach? my PC works at least14meters away, please help!
Does it perform the same with other networks?
1 meter is too short . Is the PC 4 or 14 meters? 4 meters is too short too
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem with all networks then make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Hi All,
I am creating r actual and planned renue report for service orders ( CS ) .
Problem :
I have a service order number , But i am unable get the workcenter of the order.
Please guide me how to get the workcenter based on service order.
Thanks in advance
Regards
SudhakarDear Sudhakar,
Try using this FM: CR_WORKSTATION_READ
Field: GEWRK (Object ID of the Work Center)
View: VIAUFKST
Regards
s@k
Edited by: siemens.a.k on Feb 11, 2010 10:18 AM -
FM / TABLES TO GET WORK CENTER DETAILS
hi friends,
can any1 suggest me functional module or tables where i can fetch work center details like we get in CA03Use This FM
CR_WORKSTATION_READ_ROUTING,ROUTING_DISPLAY
Use table CRHD ,MAPL
Please reward if useful. -
I just pressed the wrong button to erase of my iMac, how can i get back all information ?
Possibly through a data rescue service (can cost a four-figure amount) if you didn't have an external backup.
But you must stop using that Mac immediately, or your data will be over-written. -
IPhone SDK: UIWebView - How to get the anchor information from URLRequs
I was planning to use the UIWebView but i am stumped now.
When the user clicks on a hyperlink, the web view delegate shouldStartLoadWithRequest is called and it does not contain the anchor information.
For e.g. if the href is say #01_02. This to a normal browser is a local anchor. The URL in the NSURLRequest contains just the file name information not the anchor.
In my particular case a anchor can be some other view of the topic which i will generate and keep it ready for the browser at this point. But since i don't get the anchor information it just shows the current page.
Is there a way to get the original value encoded in the HREF?
Thanks in advance,
-TRSI may not have understood your question but if you want to pull out the anchor information out of a request, have you tried the fragment property of the NSURL object?
// request is type (NSURLRequest *); within shouldStartLoadWithRequest
NSString *fragment = \[\[request URL\] fragment\];
Usually this will have the anchor without the #, in your case 01_02. -
Bapi for getting work center using receiving order and operation.
Hi Abapers,
could you tell me the name of bapi which takes receiving order , operation
and giving back work center
Thanks in Advance.Hi,
Try this one Data_Sales upload
Bye
Maybe you are looking for
-
How may I open Pages '08 docs in Pages for Mac? Requires saving to Pages '09 which I don't have.
-
Geforce 8800GT AND Geforce 7300GT in the Mac Pro?
I used the search feature: http://discussions.apple.com/thread.jspa?threadID=1288408 That's the only useful thread I could find that has to do with 2 cards in the Mac Pro at the same time. So basically I'm wondering, has anyone tried this with the sa
-
Is it possible to download multiple files from FTP
Hi, Is it possible to download the multiple zip files from FTP.I need to download multiple files from FTP into temporary folder in my local machine. Please help me. Regards, ahamad
-
When should i opt for an interface in OOPs ABAP?
How to make the best use of interface ? what are its advantages ?...
-
Function module for finding differens in date
HI, Friends can any one help me in finding out difference in date in select option . i having problem when difference became negative .My requirement is to find out monthly report for a material . so i need to find out difference of date and need to