How to GR with VL32N to capture excise tax?

HI All,
Currently when I tested the Goods received with Inbound delivery and post Goods received with T-code u201CVL32Nu201D the system is not possible to capture excise tax. But if I post Goods received with t-code u201CMIGOu201D with reference to inbound delivery the excise tax is possible to capture automatically.
However, we need to use VL32N to GR in system.
who can advise it is possible to capture excise tax information during GR with VL32N?

all good insights...
this screencap was done this way because it was a "live - get it now or never" deal
in this case the extra wide interface that was screencapped has different sections that will have to be keyed and then run simultaneous - floated over a bg or video AND pan / scanned depending
i actually used to do scan conversion and used to shoot the screen....which worked OK...but when I stared doing all progressive stuff and wanting the options to key out various parts of an interface, I started going more with the screencap.
it worked very well on SD projects but now that we are in HD and mixed format video land the computer is maxing out.
the jpeg timeline might be a way forward (work in jpeg with scratch talking head tracks > render to primary vid format > ...
i keep thinking there has to be a new piece of hardware or something that will make all this easier but I might end up going the routes you guys are suggesting bcuz the hardware is not really there (Premiere now says CS5 will "work wonders" - but even if true, it would likely choke on this stuff.

Similar Messages

How to capture excise on base value in miro

hi masters,
I am using batch management so in one batch purity defined 90%, when I am capturing excise in MIGO there is no problem its calculated on basis of base value but when i am doing MIRO there is calculating excise on amount of MIRO instead of PO value(base value).
pl. guide me how to capture excise in MIRO according to MIGO.
if I am using MRP indicater in migo there is no effect is coming in MIRO.
Regards,
Anurag

Your excise dept. is asking for incorrect process.
Today you have a material with concentration 90% and hence you wish to value material based on concentration, you will make payment to supplier based on concentration, your entire valuation is based on concentration, but when it comes to excise you want to take credit for overall qty.
Think of the scenario if this is allowed, and once concentration is 10%, the value as per qty is 1000, excise will be let us say 100, but you wish to make payment to supplier of 100 and also take credit of 100. how can you do this?
No doubt with some technical development you can achieve this, but process point of view its not correct. If this is allowed than every company will do this and input cost of each company would be as equal to credit of cenvat availed as possible. If you map this as per me you are not mapping correct process.
Regards,
Dakshesh

How to re-capture excise duty which is issue aginst subcontract PO

Hi,
I have made a Subcontract PO with item category as L, with full payment of excise duty in subcontract there are two BOM component, then i have done MB1B ref. to MB1B document number excise invoice created with J1IS for the raw materials which we have supplied, as in case of subcontract with full payment of excise duty there is no need to create subcontract challn now I have made the GR for finish product, now how to capture the excise duty back when I ma trying to J1IEX capture excise inovice ref. to GR or PO it is showing me only finish material in the J1IEX not the RM, as the excise duty is on the RM only not on Finish product in vendor PO tax is as labour chagres only.
regards,
zafar

Hi
I wan to put some basic things here
1) when you send material to vendor with excise duty ,then vendor will take credit of that material ( your child material)
2) After processing your child material vendor will send final material only not child material
so how you will capture incoming excise for component which already consume by vendor?
second thing if you received excise invoice from your vendor for final product then check that invoice you will get only Final material name and qty, there not child material with excise if am not wrong
Regards
kailas Ugale

How can we captured Excise Duty Payable at the time of billing

Hi,
i have created billing at that time i did not take excise duty payable and i have made the document and my question is and how can we captured excise payable with out reverse or manual JV,and i heard that we can do through excise table can any body tell me the procedure
Regards,
Harish

Dear,
have you created Excise Invoice? If not then you can create through J1IIN.
Br,Vivek

How to scan with capture image and save 10.6.8

how to scan with capture image and save 10.6.8 ?

Instructions for using Image Capture for this available via the 2nd section.
http://support.apple.com/kb/HT2502

To Capture Excise Duties for Customer Material

Dear All,
Issue is regarding to capture excise invoice
for Customer Material.
1.
one of our client receives Customer material which
should not be reflected in
stock.
2. Excise should be captured which
receiving
3. Now
when this Customer material is returned back to
customer along with
the assembly (i.e. the material received from
customer is fixed
in Assembly and sent back to
customer),
4. Now
the excise
captured should be transfered back to customer's A/c.
I tried
doing by creating a material type as customer material, where in
Stock will be reflected but value will not be reflected, where exactly
we
can capture the excise details for this scenario.
How
to
proceed further to complete his scenario.
Consider this
issue
to be on high priority & i/p will be of great help.

Dear Vijayashree
From your comments what I understood is that for a particular FERT, you are procuring one component from the buyer, assembling it and invoicing to the same customer.
If this is the scenario, I dont know how you can invoice without maintaining BOM for that.
If the client dont want to maintain BOM for the same, the only option is as follows to my knowledge.
Whenever the client receives the component, take credit of the duty amount by updating <b>J1IH</b>. While doing PGI, since you have not maintained this component in BOM, stock will <i>ONLY</i> reduce for other components. So no-where, your client can track the customers component.
Parallelly, apart from selling price, to the extent of excise duty value, one more condition (say ABCD, to be maintained. So in your pricing procedure, the assessable value should be PR00 + ABCD for which, the excise duty should be captured so that the client can recover the duty amount from customer.
Finally, for this practice, the client should maintain datas (how many procured and how many invoiced) manually to convince the government officials but then, I am not sure, how far this will be accepted by the officials.
Thanks
G. Lakshmipathi

Capture Excise Invoice w.r.t Stock Transfer Order

Hi all,
Can anyone explain me how to Capture Excise Invoice W.r.t Stock Transfer Orders.
right Now i'm follwing below Steps
1. Create STO in Issuing (sending ) plant with duty and CVD conditions.
2. Issue Material to Receiving PLant using 351 Movement.
3. Book the CVD Condition thru MIRO Transaction
4. Capturing Excise Invoice w.r.t Stock Transfer Order.
5. Receive the material in Plant( 101 Mvmt).
I had Few Query at step 3 and 4.
Q1. While capturing Excise Invoice w.rt STO system is not taking CVD number as reference in Commercial Invoice Field.
Q2. It gave me the Msg Like Excise Invoice XXX does not Exist in PLant B2B ( B2B is my sending Plant).
does that mean i have to first create the excise invoice in sending plant?
if yes, how can i create pls provide step for this.
this excise invoice need to be created in reference to STO or In refernce to 351 mvmt document.
Regards,
Sheo Anand Singh

Hi Anand,
Commercial Invoice number is the invoice number u have created in your Step-3, not the CVD number.
Hope this clarifies.
Thanks,
Viswanath

Capturing Excise Invoice (EI) at depot

Hi gurus
I am facing an issue while capturing Excise Invoice (EI) at depot.
If non-batch material and batch material are combined into one material document which is generated after post goods issue (PGI) to create EI, two separate Excise Invoices are getting generated automatically.
But while capturing Excise Invoice for both materials at depot, I am NOT able to capture in T-code J1IG by Goods receipt material documents.
How to handle such case? Could you give us some suggestion?
With Regards
baalakrushnan.da

Hi Ashok,
After MB1C, when we are trying to execute J1IG with the material document number and then click "Details" button, the new screen asks for internal document number. We click on "More Documents" and manually enter the excise values along with excise invoice details and save.
This reflects the values in the RG23D and displays in J1IDEPOTSTOCK1 report also.
But when we try to sell from the Depot and create J1IJ, the uploaded invoice is not getting displayed when we are trying to select it to pass excise value.
How can this invoice be selected in J1IJ, if we follow this route.
Is this the correct process or I am making some mistake in the J1IG step.
Regards,
Debarshi

Problem in capturing excise invoice

Dear Experts,
I am facing problem at the time of capturing excise invoice in J1IEX.
A message always displays is "Excise Details are not maintanied for Vendor 9000232"
Message no. 8I565
When i am entering excise invoice with reference to PO, without PO or even the Goods Receipt.
Can anybody tell me how to overcome this error.
Thanks & Regards
Prasant Sekhar

hi,
In J1id maintain vendors excise details
Regards
Kedar

Capturing excise invoice after MIGO

Hi All,
How can we capture and post excise invoice when GR already done for the PO., (material missed in J1ID and no condition records maintained while raising the PO), I have done the following, but I am unable to post part2:
1) Maintained the material in J1ID
2) Maintained the excise condition records
3) Captured the Excise invoice(J1IEX) with reference to GR document
4) Tried to post the Excise invoice thru J1IEX, but getting message"No Part I exists for availing credit in excise invoice"
Your prompt response is highly appreciated
Regards,
Sattuj

Hi
You have captured excise invoice w.r.t GR document. But at time of MIGO, you should select "part 1 entry only" in excise tab and thus create a GR document. At this time, part 1 entry would be made. Then you can capture and post excise invoice with ref to GR document.
Please note that without part 1 entry, part2 (posting of excise invoice) is not allowed legally and SAPically.

At time of return depot invoice creation , not capture Excise Condition Value

Hi,
my queastion is that
In retun process from Customer to Depot,
when user create return Depot invoice through t-code VF01 then Not capture Excise Condition Value ( JEXP - Basic Excise Duty , JCEP- Edu. Cess Duty and JA1X - Additional tax. ) at time of Depot. Invoice Creation.
we can also check Table J_1IRG23D, in this table have value of these Excise Cond. Value.
But Delivery No. is not update in table J_1IRG23D.
and I applied condition formula 356 in Procedure ZDOM02 ( Traders Pricing Procedure).
How can capture condition value of JEXP, JCEP and JA1X at time of Retrun Depot Invoice Creation ?
Guide me .....

Hi,
I have flow your define step:
Returns from Customer to Depot
1     Create a return order in Depot
2     Key in the invoice number and execute
3     Assign Order Reason and save
4     Create a return delivery and do PGR. Maintain storage location 1030
5     Create Transfer posting in MB1B with movement type 453, storage location 1030 and save
6     Note down the material document reference
7     Go to J1IG to reverse excise issue posting
8     Click "Capture"
9     Key in the material document number and series group
10     Click "Details". Now select the line item and again click "More documents"
11     Key in the original excise invoice reference created at supplying plant
12     Skip all warning message and go back
13     Maintain the internal number and the year.
14     With this, entry from RG23D will be reversed
But still the excise condition values are not being captured during invoice VF01 and std depot routing 356 is being used.
Program name of depot routing is FV64A356.
we can also check Table J_1IRG23D, in this table have value of these Excise Cond. Value.
But Delivery No. is not update in table J_1IRG23D.
Guide me.........

Subcontract with full payment of excise duty

hi gurus
Can any one provide me itutor link of subcontract with full payment of excise duty,import cycle,import under custom bonded ware house
Thanks in advance
Roc

hi
This is a subcontracting under full payment of duty scenario.
Refer this link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Subcontracting Under Full Payment of Duty
Purpose
This procedure illustrates how you use the system to send materials to your subcontractors for processing using normal excise invoices.
Prerequisites
You have created a condition type for manually entering excise duty in the subcontract order. In the standard system, you can use condition type JEXC, maintain in pricing procedure.
Process Flow...
1. Create a
tract order for the subcontractoru2019s services.Enter excise manually in the condition type JEXC & take a tax code for VAT calculation.
2. Do the transfer posting for the materials that you want to send to the subcontractor.
3. Create an outgoing excise invoice for the materials by J1IS & J1IV.
4. You send the materials to the subcontractor, together with the excise invoice.
5. The subcontractor processes the materials and returns them to you, together with another excise invoice.
6. Captures the subcontractoru2019s excise invoice, using the purchase order as the reference document.
7. Do the goods receipt & refer excise invoice in excsie tab.
8. Posts excise invoice.
9. The accounts payable clerk posts the subcontractoru2019s invoice.
for imports
Import scenario
To map Import procedure into SAP , follow the following steps :
1.Create material master of import goods.
2.Create vendor master record of import vendor and Customs clearing vendor.
3.Maintain CIN settings.
4.Maintain J1id.
5.Maintain Pricing procedure SAP standard JIMPOR..,maintain required conditions..JCDB,JCV1...
6.Assign the schema to respective import vendor in Purchasing view of VMR.
7.Create import PO ,check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned..This can be done by In condition tab select condtion then click on display,then enter.
Save the PO.
8.MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
9.Capture Excisse invoice--j1iex.
10.MIGO.
12.Post Excise Invoice.
13.MIRO...Payment to vendor(import vendor)
http://help.sap.com/erp2005_ehp_01/helpdata/en/95/3ca40a110511d4b5ae006094b9ec21/frameset.htm
regards
kunal
award if helpful

Reg j1iex capturing excise

Hello All,
While capturing excise for a particular chapter id if a mention some amount in duty rates>specfic tab>field BED(basic excise duty) then its taking double of this amount in duty values section.
for eg if i mention amount 500 in bed field in specific tab (below in j1iex screen) thn in duty values tab its showing 1000 which is double of the amount specified.
Pls let me knw how to go abt it.
Thanks,
Sunny

hi,
see if any other taxes are getting added with the BED.
Also check in SPRO, FI , whether there are any calcultaions being done.
Also try to debug and find out where exactly the value is getting doubled. that might give you an idea, where exactly the problem lies.
Regards,
Narayani

Capturing Excise values while using BAPI_GOODSMVT_CREATE

Hi,
I am able to successfully create the GR using BAPI_GOODSMVT_CREATE taking PO as the reference but unable to capture the excise values.
I am trying to use BAPI_EXCINV_CREATE_FROMDATA to capture excise values but without success.
I have already checked the forum but have not found any suitable answer.
pls guide me through this....
murali.c
Edited by: murali ch on Nov 25, 2009 4:24 AM

Hi Murali,
Could you Let me know how you sort out this issue. I am facing a similar problem.
I created the Goods movement for MIGO with 101 and I am trying to post excise details with the bapi
BAPI_EXCINV_CREATE_FROMDATA,
The Return messsage are zero but its actually not posting to excise tables.
Regards
Aromal R

Settings for capture excise invoice in MIGO and other settings

Hi,
For excise invoice capture and post procedure which we are following is as follow
1 : For Local Excise invoice
     After receving goods from Vendor first we are Doing J1IEX Part 1, Capture excise invoice after saving this we are getting part 1 number, then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality afetr that we are doing J1IEX poat PART 2 here we are getting part 2 number then invoice verification,
2 : For import PO
      First MIRO for custom delivery cost we are getting MIRO number, then J1IEX part 1 ref. to MIRO number and year then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
regards,
zafar

hi
>is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
yes u can use both simultniously
but in MIGO if u capture, the step of updation J1i5 will be ommited (it will take palce automatically)
like currently ur doing capture >update >post
in migo only capture and then post
>second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
You can do capture and post simultaniously in migo only
the separate transaction is given as persons or users may be diffrent for GR and excise
if the same user want to do the GR and cap and posting then yes he can
for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
regards
kunal

How to GR with VL32N to capture excise tax?

Similar Messages

Maybe you are looking for