How to Hide Tools Palette?

Hi-
I have a .vi that starts running when opened. Unfortunately, the 2 tools pallete popup when I start labiew. [ie. "labview filename.vi" and then my .vi opens, along w/ tools palletes]. Is there a way I can disable the tool palettes?
thanks
Phil

Hi Philip_B,
try this:
- Open LabView and a new VI
- Close palette
- Close LabView (current configuration (no palette) will be stored)
- Start your VI => the palette should not be visible
Thats it,
Lorand

Similar Messages

How to hide tools bar of Forms

I have an application on an intranet and i want to hide the tools bar of Forms.
null

Hi there,
If you don't use the default toolbar, you should have a canvas on which the toolbar is placed. You can hide that using set_canvas_property.
Good luck

How I do turn off the auto-select tool in the tools palette?

No matter what I do in LabVIEW 8, it keeps turning itself back on. It never used to do that in LV6.1!!!

Yes, I noticed that too... Annoying, isn't it? I haven't seen how to turn that off, as a matter of fact, I haven't seen the tools palette either..

How to move back the 'Tool Palette' to the upper corner?

Hello, I accidentally performed several mouse-clickings on the 'Tool Palette' in the Layout Editor and then the mentioned palette was placed at the left-handed bottom of my screen, which is very very inconvenient. Would anyone let me know how to restore it to the original position?
P.S. I am using the Oracle Reports 2.5 bundled with Designer/2000.
Thanks for your replies!

hai
    For this issue goto t.code MSC2N give Material,Batch and Plant.
than select Basic data1 and find batch status select unrestr-use.
      i think this is help to you.
          regards
                  m.harikrishna.

How can I display the length of the yet unfinished line that a user is drawing in the image using the line tool of the IMAQ tool palette.

Is this really not possible using standard Labview/Vision YI`s?

Herbert,
I can't find a way to extract the information you want within the program. However, this information is displayed as part of the IMAQ tool palette while the user is drawing the line. The pallette shows the anchor point, the X and Y offsets, and the line length and angle.
Bruce
Bruce Ammons
Ammons Engineering

How To Hide Adobe Tool Bar in Web Dynpro For Java.

Hi To All,
            I'm using NetWeaver 2004's. In Project i require to Hide Adobe Tool Bar.I already used Hide Reader Tool Bar Button from Standard Library for Web Dynpro.But it was not Working. I want Programatical way to Hide Adobe Tool Bar.
Can anybody Help me out.
Regards,
Roop Kumar.Annavarapu.

Hello,
this is possibble. please check the following code part:
// Get interactibe form handler. interactiveFormID is the ID of the
//interactive form assigned to the form at the designtime on the
//interactive form UI element property sheet.
IWDPDFDocumentInteractiveFormHandler iFormHandler =
   WDPDFDocumentFactory.getDocumentHandler(wdThis.wdGetAPI(),
        interactiveFormID);
// Get appearance setter.
IWDPDFDocumentAppearance appearance =
   iFormHandler.getDocumentContext().getAppearance();
// Hide tool bars.
appearance.hideToolBars(true);
I hope this helps.
Best regards,
Dezso

How do I remove colors from the Tools Palette

Hi,
I recently defined two custom colors (blue and green) that were required for our brand representation (I am using Unstructured FM 8). I used the RGB values that Marketing provided to obtain these colors. For some reason, I now have the entire RGB blue and green libraries displayed in my Set Color option of the Tools Palette.
Is there a way to remove these standard RGB libraries while keeping my custom color definitions?
Thank you,
Miruna

the »Indexed color efficiencies« came from way back when the Net was a number of very thin electronic pipes connected to each other.
You're replying to someone who recalls full page 300 dpi TIFFs taking 30 minutes just to display for text overlay in Frame 3.1.
It is a long time I heard someone complaining about image files larger than 32k. but of course, FrameMaker should handle them OK!
Frame handles large images with ease. I've generated PostScript files of 1GB. The issue is what size PDF they distill to.
We render to PDF at the same resolutions for both publishing and web (200 dpi contone, 600 bitmap). Multiple dozen large images can easily make a final document PDF that is too large for practical web use. Our general rule is that if a single image adds more than 250 KB to the final PDF, we take steps.
I often have to deal with dense vector objects that are well over 5MB as raw EPS. I routinely save a convenience browsing PDF of each image, and if it's over 250K, the image gets attention.
For B&W line art, flattening to 600 dpi dithered bitmap in Photoshop usually suffices, but rasterizing to contone does not, because our workflow passes 600 dpi "bitmap", but subsamples "color" and "gray" to 200 dpi.
I had this one vector-overload externally sourced image where I needed just a touch of one color. I was hoping that indexed color (e.g. GIF) might be the solution, but Distiller downsampled it anyway. Some of the indexed color tests, as I recall, but cannot now re-create, also polluted the color pallete.
The work-around, in case anyone else has the same requirement (hi-res bitmap with color), was:
Open the .ai file in PhotoShop, 600 dpi gray.
Convert to bitmap, 600 dpi, diffusion dither.
Save as .tif.
Open the original .ai in Illustrator.
Isolate the color elements to the top layer.
Open the .tif bitmap in Illustrator.
Copy the bitmap into a new bottom layer.
Align the bitmap with the vector B&W layers of the same content.
Turn off the vector B&W layers.
Save the .ai.
Flatten and save as .eps.
This survives distiller, and provides a bitmap with color.
Don't forget to redact the metadata. It can add MBs all by itself.

How to hide read mode navigation in acrobat xi permanantly

How to hide "Read mode navigation" . In my application i am opening pdf file in light box window where i disable right click to protect download and print pdf file( only View ). but This Read mode navigation is appearing automatically when we put curson on file even if we protect the document. I have purchased Acrobat professional xi to created protected acrobat file by disabling menu tool bar but there is no option to hide readmode navigation. Please let us know how to hide this.
Thanks,
Nagendra

If you want the form "flattened", that is all form fields converted to PDF context, you need to use some JavaScript to flatten the form fields. This will remove all form functionality. It will not prevent editing by Acrobat's text touchup or object tools.
The "submit" button is used by other users to sent the PDF form data to a central collection site or email address where the sender or provider of the form can collect the submitted data.
You could also use a digital certificate to sign the form and lock the fields. The signature will also verify that no changes have been made to the PDF since it was signed and one could also see what was changed.

Lost tools palette

The tools palette seems to have gone missing. I've tried de-selecting it then re-slecting it and looking behind the open windows, but i can't seem to see it ...is there a way of setting preferences to how hey were originally?

I thank you..like magic, it returned!

My tools palette has disappeared

To say I am a novice at InDesign would be to insult most novices. But I do put out a decent product knowing just what I need to know and bumbling my way through the rest.
So today I am working and suddenly my tools palette disappears. I closed the program, waited a bit, and then restarted it. It is still missing. I rebooted my maching (Win7). No tools palette. I went back to another project hoping I did something on this project that made it disappear and it would show up elsewhere. Nope.
I though that maybe it was just missing from my screen so I made the screen smaller (seeing lots of pages) hoping it had slid all the way to the left. Nope.
Nothing I do seems to bring it back. Of course I first went into Windows and there it was checked. I unchecked it and shut down. Started up again and it had remained unchecked. I checked it and my page shifted a bit to the right but still no tolls palette.
Can anyone help me?
Thanks,
Kathie

I might just have the solution or part of a solution. My work just upgraded to version CS4. When I opened InDesign, I had the same problem where I could not find the tools palette. I opened a file created in an older version which opened without a glitch. What I discovered is when the window for this file opened it "snapped" into a frame that covered over the palette. I kept checking and unchecking the "tools" under the Window menu to no avail until I resized my current document's window and ta-dah! There is was...
I'm curious, for those using CS4 for the first time, does opening a document hide your tools palette? After I got the palette back, I closed out of the document to check if it will hide the palette again but it didn't. I did re-size the window so it may have "remembered" what size it should be... Anyway, I hope it helps somebody....

Keeping tool palettes visible

So I am new to using Flash on a Mac. I am used to working on a PC at work and so now one of my frustrations is how the tool palettes disappear when you leave the program. For instance, part of my job is to have my actions panel open with URLs for my flash movie and compare it to links listed on a website where I have to click to see the URL. So when I go to Firefox to view the link, my tool palette disappears. Please tell me there's a way to set so the tool palettes remain even if I am not focused on Flash. I guess the same goes for all Adobe prods, but mostly for Flash for me.
oh and I am using Flash CS3 on Mac OS X.5
Thanks

Not that I ever heard of. However, Safari is still viewable, and if you have a mouse with a scroll wheel it is even scrollable, when it is in the background. So arrange things so you can see Safari and bring the other application forward. If it has the idiotic "I have all the screen when I'm forward" setting programmers have become so fond of (too much time in Windows I guess), you may be able to turn some of that off--anyway, you can in Photoshop Elements. Explore the Preferences, look for a setting involving seeing the Desktop. Otherwise the best you can do is take a screenshot of your open app, open the screenshot in Preview, size it to something that allows you to see both it and Safari, and compare the page with the screenshot.
Francine
Francine
Schwieder

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

STMS: how to hide the Import All Requests button in the import queue view?

Hi All,
I'd like to know how to hide the "Import all requests" button in the import queue view.
Thanks a lot for your answers.
G.

Hi,
about hiding i have a doubt but u can inactivate by following procedure,
As referred in a thread:
On the domain controller, in STMS>overview>systems>(double click the one you want to change)>Select Transport Tool tab and click on change. Add Import_single_only value 1, import_single_strategy value 1 and no_import_all value 1. Save distribute and activate.
or
Refer to OSS NOTE 194000.
Thanks & regards.

How to hide rows?

Hello folks,
I just would like to know that how to hide rows except dbms_rls package? I mean, it has been said that I can hide rows to create views but lets said that I have got 200 students and each student can see only their rows in students table, in that scenerio I have to create 200 views, isn't it? I just would like to learn that how to hide rows with using views? Do you have any ideas?
Note: I know dbms_rls package, except this solution I am tryin to find onather solution.
Thanks a lot.

Hi,
Polat wrote:
Hello folks,
I just would like to know that how to hide rows except dbms_rls package? I mean, it has been said that I can hide rows to create views but lets said that I have got 200 students and each student can see only their rows in students table, in that scenerio I have to create 200 views, isn't it? No! As you realized, that's not practical.
If every student is a separate Oracle user, the USER fucntion will return the name of the current user. A view definition can reference that function, like this:
CREATE OR REPLACE VIEW view_x
AS
SELECT   *
FROM    table_x
WHERE   student_account = USER;If you logged in to Oracle as POLAT, then the view will contain only rows where student_account='POLAT'.
If you logged in to Oracle as SYSTEM, then the view will contain only rows where student_account='SYSTEM'.
If students do not have thier own Oracle accounts, then they are probably authenitcated by some procedure in your package. That procedure can set a SYS_CONTEXT variable, or write data to a global temporary table, which you can then use instead of the USER function in view definitions.
Note: I know dbms_rls package, except this solution I am tryin to find onather solution.Why can't you use dbms_rls, or why don't you want to use it? It's a very powerful tool, and not vey hard to use.
I'm not saying there's never a good reason not to use dbms_rls; I'm just asking if you have one.
I hope this answers your question.
If not, give a specific example of what you want. Post CREATE TABLE and INSERT statements for some sample data for all tables involved. Identify 2 or 3 different students, and show what the contents of the view should be for each student, given the same sample data. If students do not log in to Oracle with their own usernames, then explain how you know which student is currently logged in.

How to use the palette or drag and drop functions in netbean?

Is there anyone who can help me out on using drag and drop function in netbean to design GUI inteface..??
Is palette is the tool that can be used to drag and drop.??
thank you in advance.

I actually really like the GUI builder in netbeans. I used to be a big eclipse user so I am very familiar with coding GUIs by hand, and most of what I do involves GUI's or at least swing.
At first I hated netbeans, I hated that I couldn't edit the code most. Then I decided to take a deep breath and really examine the issue. What I discovered is that most of the edits I wanted to make but couldn't really weren't the right way to be doing it in the first place, for the rest the code is actually really easy to change you just have to know how.
Now my palette is huge, probably about 250 objects in it organized into sections that work for me. Basically if I want a object to do something that is not already in the palette I simply write a new object and add it to the palette. I started small like with rounded buttons/progress bars, and as I got comfortable I now have some fairly advanced objects like grids, isometric grids, alpha composits, an animated hourglass countdown timer, and an animated "loading/activity" indicator that is not tied to a progress indicator.
The main reason I stuck with the netbeans drag and drop GUI builder is it's layout manager is really a very nice layout manager, you couldn't pay me enough to go back to eclipse or codeing GUIs by hand, as I can now do in one day what used to take me several weeks.
So what I am saying is stick with netbeans and the drag and drop, it sucks at first, but once you get to a point where you are comfortable with it and adding to the palette it will become a great tool.
JSG

How to Hide Tools Palette?

Similar Messages

Maybe you are looking for