How to import one project file into another project file

In previous versions I could take an 8 track project file and drag it into another project. This doesn't work in version 10. I am playing multi track stems for worship. I create each song as it's own file then drag them together to create a set. I don't mix down since I want to be able to add or subtract an instrument based on who may or may not be avaiable that day. Has this feature been taken out of Version 10? Can you do this in either Logic or Mainstage?
Thanks

<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml"/>
<xsl:template match="/">
<xsl:variable name="xml1" select="document('xml1.xml')"/>
<xsl:variable name="xml2" select="document('xml2.xml')"/>
<xsl:copy-of select="$xml1"/>
<xsl:copy-of select="$xml2"/>
</xsl:template>
</xsl:stylesheet>

Similar Messages

How can I [cmd]+A including text boxes? Or how to import one Pages document into another Pages document?

Hi there,
I am working on my thesis with several Pages documents (for the first time). And I really have searched all over the Internet to find an answer to exactly my question but I cannot find it.
First my question was: How can I import one Pages document into another one? I found the answer on that (I think) and there is nothing else than just make a new section and copy/paste it in.
But then another issue pops up: I cannot [cmd]+A my whole document including the texboxes to paste it in the other Pages document. Then the document will be paste without the textboxes (and I have quite a lot of them in that document) and the text will not be at the right place.
So please explain to me: How I can combine two Pages documents and keep them exactly the way they are? Is that even possible?
I thank you so much in advance!

Hi Fruhulda,
I have already tried to mark the textboxes in line but that did not work, and besides then the text and the boxes won't be at the rigt places either. Thank you for your reply .

Importing one Pdf document into another.

I am trying to import one Pdf-document into another using a Reference XObject. I am looking at thePDF- specification, and I thought I was doing things the right way, but its not working. The PDF-specification doesen't have an example of how to do this, only an explanation.
Below is the PDF-file I am testing with (if anyone can be bothered looking at it ). The file embeds another pdf-file, and is supposed to show a part of the embedded file at a certain position.
Again, if anyone can be bothered looking at my PDF and see if they can see what I am doing wrong here I would appreciate it.
(There is nothing wrong with the embedded file itself...)
PDF-file embedding another PDF-file and using a Reference XObject to display the embedded file:
%PDF-1.5
1 0 obj
<<
/Type /XObject
/Subtype /Form
/BBox [0 0 100 100]
/Ref <<
/F (4fa27162e72547a00771606.pdf)
/Page 1
>>
>>
endobj
2 0 obj
<<
/Type /Filespec
/F (4fa27162e72547a00771606.pdf)
/EF <</F 3 0 R>>
>>
endobj
3 0 obj
<<
/Type /EmbeddedFile
/Length 854
>>
stream
%PDF-1.5
1 0 obj
<<
/Length 334
>>
stream
q
1 0 0 1 128.10769621539 70.591821183642 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 -128.10769621539 -70.591821183642 cm
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
0 0.89 0.89 0.05 scn
0.2743205486411 w
2.743205486411 M
0 J
0 j
-1.9202438404877 -2.6517653035306 260.05588011176 146.48717297435 re
h
B
Q
endstream
endobj
2 0 obj
<<
/Type /Page
/Parent 3 0 R
/Resources <<
/Font <<>>
/XObject <<>>
>>
/MediaBox [0 0 255.11811023622 141.73228346457]
/Contents [1 0 R]
>>
endobj
3 0 obj
<<
/Type /Pages
/Kids [2 0 R]
/Count 1
>>
4 0 obj
<<
/Type /Catalog
/Pages 3 0 R
>>
endobj
xref
0 5
0000000000 65535 f
0000000010 00000 n
0000000401 00000 n
0000000568 00000 n
0000000624 00000 n
trailer
<<
/Size 5
/Root 4 0 R
>>
startxref
679
%%EOF
endstream
endobj
4 0 obj
<<
/Length 322
>>
stream
q
1 0 0 1 93.268986537973 71.826263652527 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 -93.268986537973 -71.826263652527 cm
55.961391922784 45.628651257302 74.615189230378 52.39522479045 re
W n
1 0 0 1 55.961391922784 42.062484124968 cm
74.615189230378 0 0 55.961391922784 0 0 cm
/XobjectPDF1 Do
Q
endstream
endobj
5 0 obj
<<
/Type /Page
/Parent 6 0 R
/Resources <<
/Font <<>>
/XObject << /XobjectPDF1 1 0 R >>
>>
/MediaBox [0 0 255.11811023622 141.73228346457]
/Contents [4 0 R]
>>
endobj
6 0 obj
<<
/Type /Pages
/Kids [5 0 R]
/Count 1
>>
7 0 obj
<<
/Type /Catalog
/Pages 6 0 R
>>
endobj
xref
0 8
0000000000 65535 f
0000000010 00000 n
0000000144 00000 n
0000000238 00000 n
0000001172 00000 n
0000001551 00000 n
0000001738 00000 n
0000001794 00000 n
trailer
<<
/Size 8
/Root 7 0 R
>>
startxref
1849
%%EOF

PDF is a binary format. The most important piece in a PDF file is the cross
reference table. It contains byte offsets to the different objects in a
file. If you insert just one space (which in a true ASCII file will not
change much), you are making all byte offsets after the insertion point
invalid. They now all point to something different than the start of an
object.
Because there is no standard about how line endings are encoded in text
files, every time may add (or subtract) a byte - depending on what computer
system and what editor you use to convert your PDF to fake-ASCII, and then
again what I use to try to convert it back to PDF. If you are using a
Windows system and I'm using a Mac, the cross reference table gets
corrupted. And that's even before the web server does it's magic and
potentially adds data.
If you want somebody to look at your file.
Have you looked at the post I linked to? The settings in Acrobat are
important. You need to enable Reference XObjects, AND you have to declare
the directory where your target file is stored as trusted.
From what I can see in your PDF code, you are doing a whole bunch of cm
operations. You may want to consolidate all those into one operation. I
have not done a detailed analysis, but you could potentially shift your
data off the page. Keep it simple and see if that makes a difference.
Karl Heinz Kremer
PDF Acrobatics Without a Net
[email protected]
http://www.khkonsulting.com

How to retrive one table records into another table by multiple records

how to retrive table X records into another table Y by multiple records (means at once i want display 10 records) in form 6i .
when i am written cursor it is ftching only one record.But i want to display all records at once.
Declare
Cursor cur_name is
select PROTOCOL_NO,DOCNUM,SUBSETSN,REPEATSN,AESEQ,AETERM from coding_ae WHERE PROTOCOL_NO='KP229';
Begin
open cur_name;
loop
fetch cur_name into :PROTOCOL_NO,:DOCNUM,:SUBSETSN,:REPEATSN,:AESEQ,:AETERM;
exit when cur_name%notfound;
next_record;
end loop;
close cur_name;
End;

Hi,
Make sure the cursor is in the detailed block. For that use 8GO_BLOCK* built-in. So the code will be
Declare
Cursor cur_name is
select PROTOCOL_NO,DOCNUM,SUBSETSN,REPEATSN,AESEQ,AETERM from coding_ae;
Begin
GO_BLOCK('<detailed_block_name>');
open cur_name;
loop
fetch cur_name into :PROTOCOL_NO,:DOCNUM,:SUBSETSN,:REPEATSN,:AESEQ,:AETERM;
exit when cur_name%notfound;
next_record;
end loop;
close cur_name;
End;Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly

How do I import one iPhoto library into another?

I have one iPhoto library on my iMac--family photos--and just imported another one from a Mac Mini, which I've called iPhoto (hiking), as it is photos of our hiking trip. I'd like to import everything from the latter into the former, then delete the latter. I tried just dragging the latter in, but instead of merging, it replaced the former. I've fixed that, thanks to Time Machine, but now need to merge my libraries. Any ideas?
Thanks

Well I'm not sure what you did but no one else has managed to ever import one Library to another without causing a mess as described above - in fact as you describe yourself:
It imported the photos and the thumbnails. All I had to do was delete any duplicates and orginize it.
You also lost any keywords, albums, Faces and Places along the wy. Merging two libraries will not import any thumbnails, there will be no duplicates and you'll have no organising to do.

How to add one textbox value into another textbox value every month in a list of infopath 2013

InfoPath 2013.
I have created a list in which I placed 2 textboxes.
I have one textbox named Paid Amount:
Second textbox named Invoice Amount:
I want when I add any amount in Invoice Amount textbox in every month it Add into
Paid Amount textbox
How I can do this ?
for e.g:
Paid Amount : 2
Invoice Amount: 3
Paid Amount = 5
When enter next month 6 in Invoice Amount the
Paid Amount turn into 11.

You can apply formula using a rule by creating a hidden field and calculate the values. Refer to the following posts for more information
http://office.microsoft.com/en-in/infopath-help/add-subtract-multiply-and-divide-values-HP001096532.aspx
https://support.office.com/en-us/article/Add-rules-for-performing-other-actions-5322d726-b787-4e5f-8d37-ba6db68b451d?ui=en-US&rs=en-US&ad=US
and for complex calculations using code, refer to the following posts
http://www.infopathdev.com/forums/p/21500/74297.aspx
http://drekendrop.blogspot.in/2011/03/infopath-2010-get-and-set-value-of.html
Cheers,

How to copy one account preferences into another account on the same mac?

I would like to open a new account (on the same mac) but would like to copy some preferences including software from the existing account. How can I do that?
Thanks

To copy files from Account A to Account B:
1. Log in as A.
2. Find the files you wish to copy.
3. Move them to /Users/A/Public. Don't move your actual Documents, Pictures, Library etc folders. Just move their contents.
4. Log in as B.
5. Navigate with Finder to /Users/A/Public.
6. Drag the files to the desktop to make new copies of them.
7. Put the files away in the appropriate places in B's home folder.
8. Log back in as A and move the files in /Users/A/Public back to their original locations.

How to insert one XML document into another

Hi,
I've been working on a simple CMS.
There is a main template that is just a HTML page. The main template has a few extra 'module' tags that indicates places where individual modules have to be placed.
main template: template.xml
<html>
<body>
<div>
<module id="centre"/>
</div>
</body>
</html>module template: module_centre.xml
<div>
<a>This is a MODULE and it may be much more complex</a>
<div>My application has to detect every 'module' tag from the template.xml and insert there XML content from a proper module template.
The result file has to be generated dynamically on a request. The structures of 'modules' can be only defined in module_*.xml files.
The expected result
<html>
<body>
    <div>
        <div>
            <a>This is a MODULE and it may be much more complex</a>
        <div>
    </div>
</body>
</html>What's the best practice do solve this case?
Pawel

I think I've came up with a better solution.
SRC file
<?xml version="1.0" encoding="utf-8"?>
<html>
<head>
    <title></title>
    <style type="text/css">
div.c4 {background-color:pink;width:400px;height:50px}
div.c3 {background-color:green}
div.c2 {background-color:blue;width:400px;height:299px}
div.c1 {background-color:red}
</style>
</head>
<body>
<module id="XXX"/>
    <div id="main" class="c3">
      <div id="top" class="c1"><module id="menu_test"/></div>
      <div id="bottom" class="c2"><module id="menu_test2"/></div>
    </div>
    <div id="footer_container" class="c4">    <module id="menu_footer"/></div>
</body>
</html>MODULE src file
<?xml version="1.0" encoding="UTF-8"?>
<div id="admin_panel_module" style="background-color:orange;width:200px;height:50px">
    <p>Control Panel TEST</p>
</div> @param source - NODES from MODULE document
*@param target - TEMPLATE document where MODULES are going to be inserted*
@throws Exception
public static void insertModules(Node source, Document target) throws Exception {
Node importedNodes = target.importNode(source, true);
// Use XPath to find all 'module' nodes in ''
XPath xpath = XPathFactory.newInstance().newXPath();
NodeList nodes = (NodeList) xpath.evaluate("//module", target, XPathConstants.NODESET);
// Remove MODULE node and insert there an XML content from MODULE template
for (int idx = 0; idx < nodes.getLength(); idx++) {
Node editedModuleElement = nodes.item(idx);
// parent of module mode
Node parentNode = editedModuleElement.getParentNode();
// replace <module/> node with imported nodes from 'module' XML document
parentNode.replaceChild(importedNodes, editedModuleElement);
// nodes.item(idx).appendChild(node);
importedNodes = target.importNode(source, true);
}Edited by: maestr0 on May 24, 2010 12:44 AM

HT4007 I have multiple libraries. I would like to import one project into another library. How?

I have multiple libraries. I would like to import one project into another library. How?

Select the project in the Library Inspector and export the project as library. Then import this library into your other Aperture library.
File > Export > Project as New Library
File > Import > Library
Regards
Léonie

Is it possible to import slides from one Keynote presentation into another. If so how do I do it on iPad 2?

Is it possible to import slides from one Keynote presentation into another. If so how do I do it on iPad 2?

You do it sort of like the way you arrange your apps on the iPad and how you drag apps into groups. You do the same technic with your Keynote slides.
Look here......http://support.apple.com/kb/PH1360

How do I import one xml file into 3 separate tables in db?

I need to utilize xslt to import one xml file into 3 separate tables: account, accountAddress, streetAddress
*Notice the missing values in middleName, accountType
sample xml
<account>
<firstName>Joe</firstName>
<middleName></middleName>
<lastName>Torre</lastName>
<accountAddress>
<streetAddress>
<addressLine>myAddressLine1</addressLine>
<addressLine>myAddressLine2</addressLine>
</streetAddress>
<city>myCity</city>
<state>myState</state>
<postalCode>mypostalCode</postalCode>
</accountAddress>
<accountId>A001</accountId>
<accountType></accountType>
<account>
I need the following 3 results in 3 separate xml files in order for me to upload into my 3 tables.
Result #1
<rowset>
<row>
<firstName>Joe</firstName>
<lastName>Torre</lastName>
<accountId>A001</accountId>
<row>
<rowset>
Result #2
<rowset>
<row>
<addressId>1</address>
<city>myCity</city>
<state>myState</state>
<postalCode>myPostalCode</postalCode>
<row>
<rowset>
Result #3
<rowset>
<row>
<addressId>1</addressId>
<addressLineSeq>1</addressLineSeq>
<addressLine>myAddressLine1</addressLine>
<row>
<row>
<addressId>1</addressId>
<addressLineSeq>2</addressLineSeq>
<addressLine>myAddressLine2</addressLine>
<row>
<rowset>

Use XSU to store in multiple tables.
"XSU can only store data in a single table. You can store XML across tables, however, by using the Oracle XSLT processor to transform a document into multiple documents and inserting them separately. You can also define views over multiple tables and perform insertions into the views. If a view is non-updatable (because of complex joins), then you can use INSTEAD OF triggers over the views to perform the inserts."
http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#i1007013

How to import a XML file into the document?

Hai,
i had created a table using xml file....
Now i want to import that xml file tabel into the document...
Can any one tell me how to import the xml file into the document?
thanks
senthil

Hai...
this is senthil...
i'm beginner for creating adobe indesign plugins..
i want to import a html file in the document...
i want to create a table by using html tags and
that table will be imported into the document..
How shall i do it?
can any one plzz explain me?

How to import a PSD file into Indesign WITH layers so it can be edited/saved as an InDesign file?

How to import a Photoshop file into Indesign CS6 so that it's layers show in InDesign and it can then be edited/saved as an InDesign file?

MyTienN wrote:
Someone had mentioned the possibility of saving each individual layer in Photoshop as a png file and importing into Indesign and adjusting it in there
What do you mean by "adjust"? Editing of Photoshop images should be done in Photoshop.
Sure, it's possible to save individual layers from an image in Photoshop as inidvidual files in a variety of formats, but what's the point? You could just as easily import the layered file, then copy/paste it into a new layer for each layer in the image and use layer visibility to control which ones show. I don't think that will do you a lot of good, though, if you use adjustment layers or opacity controls on the layer in Photoshop.

How to import maven projects into jdev

Hi.
i have maven project created in other than jdev IDE.i am trying to import maven project into jdev.
i configured maven in jdeveloper 11.1.1.4 with help manu check for updates.
i am follwoing the [how to import maven project into jdev|http://www.oracle.com/technetwork/developer-tools/jdev/maven11g-090173.html#4]
after updating my jdev with maven extensions,i could not see maven project in file|import project menu.
why maven project is not appearing in jdev 11.1.1.4. file|import project menu ?
please help appriciate your help

Though it's not clear in that link, I believe those instructions to be for JDev 11.1.2.1.0, not 11.1.1.4.0. However somebody may correct me.
CM.

How to use one report column into the another report in obiee

How to use one report column into the another report in obiee

i dont want to use column as a filter for another report it should be report column for another report
Thanks,
Vivek

How to import one project file into another project file

Similar Messages

Maybe you are looking for