How to install SCCM at Azure?

Hi,
I am using SCCM 2012 R2.
The main problem is Temporary Storage partition at Azure VMs. SCCM use this partition and I get problems with Reporting Point (https://social.technet.microsoft.com/Forums/en-US/41482001-c51b-4380-8d26-9b5d56969b3f/reporting-point-role-autoinstall-several-times).
A partial solution is: NO_SMS_ON_DRIVE.SMS file (http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx)
But the Temporary Storage partition flush at restart.
The questions are:
Does Azure officially supports SCCM?
What would be the procedure to install SCCM at Azure?
Better not install SCCM at Azure?
Thanks in advance!

Hi,
I do belive it is supported,
http://blogs.technet.com/b/configmgrteam/archive/2013/10/23/configmgr-and-endpoint-protection-support-for-windows-azure-vms.aspx
Never tried it though.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec
Thanks.
But the following not states SCCM is installed at Azure, the following states the manage of Azure VMs by SCCM:
Today, we’re happy to announce that we are enabling
support for managing Windows Azure Virtual Machines using System Center 2012 Configuration Manager SP1 or later and, System Center 2012 Endpoint Protection SP1 or later. That means, using the same products and skills you
use for your on-premises datacenters, you can continue to manage your servers in the cloud

Similar Messages

How to install sccm client on bulk collections using push installation

Unfortunately I did something and received the following description:-
How to know/reproduce the following scenario by installing sccm client on bulk collections in SCCM 2012R2?
"User ***** requested that the CCRs will be generated for collection “All Windows Client Systems (P0100015), The SMS Provider did not generate CCRs for all the system resources in this collection.
Possible cause: some system resources are not assigned to the current site, and you chose to insta
Il clients only on system resources that are
assigned to current site.
Another possible cause: Some system resources do not have Microsoft Windows NT operating system
or above installed.
Message ID: 30110"

Ok. Some of your clients are not covered under any site assignment boundary, hence you are getting that error. Would recommend you to select "Install the client from a specified site" and select the Primary site. If your boundary groups for content
are configured fine then the client will be installed from the appropriate site for each machine you are pushing the client to.
-RG

How to install SCCM client in native mode on kiosks machine

Please share the whole process of sccm client installation and server configuration for kiosks machine

https://www.dropbox.com/s/xcf57h95j1b90am/SC2012_ConfigMgr_DocDownload.docx
Hope this link help you
DushYant'

How to Install Azure SDK on Azure automation

i have a powershell script that connect to storage table and read the data from a Table. which works fine on the local where Azure SDK 2.1 is installed.
While i add it as part of Azure automation i get an error as not able to resolve "Microsoft.WindowsAzure" this is because we donot have Azure SDK on the machine where this
runbook of azure automation is running.
IS there any option to enable/install Azure SDK on the machine where runbook executes?
Is there any alternate option to upload required assemblies as part of setting so that runbook could use while executing.
below is the sample power shell script to connect to storage table.
[string]$storageAccountName ='xxxxx'
[string]$storageAccountKey =’xxxxxxx'
$accountCredentials = New-Object Microsoft.WindowsAzure.Storage.Auth.StorageCredentials $storageAccountName, #Create instance of CloudStorageAccount object
$storageAccount = New-Object "Microsoft.WindowsAzure.Storage.CloudStorageAccount" $accountCredentials, $true
#Create table client
$tableClient = $storageAccount.CreateCloudTableClient()

This is not a scripting question. You need to ask this in the Azure forum.
Jut adding a bit of script to your question does not make it a script issue. Yu need to as the Azure techs how to install and manage the Azure platform. They will give you links to the docs you need to learn how to deploy Azure.
The SDK can be downloaded from Microsoft.
¯\_(ツ)_/¯

SQL server 2014 cloud adapter (Azure) how to install manually?

The SQL Server Cloud Adapter is installed when you use a pre-configured Azure VM for SQL Server:
http://msdn.microsoft.com/en-us/library/dn169301(v=sql.120).aspx
How do you install this if you do your own manual SQL Server install on an Azure VM?
If it is not installed, can you still use the Deploy to Azure wizard in Management Studio?
Tim

Hello,
To deploy a SQL Server database to a Windows Azure vitual machine the cloud adapter is required.
You can download and install it from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=42295
(ENU\x64\SqlCloudAdapter.msi)
The following article may help you configure this adapter:
http://msdn.microsoft.com/en-us/library/dn169301(v=sql.120).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to install BITS after SCCM 2012 has already been installed?

Hello,
I inherited an SCCM 2012 server that someone else on our team installed. I noticed after looking at his screenshots that BITS did not get selected to be installed. Can someone tell me how to install this on the SCCM server? Is it a matter
of going back to the iso or is there another better way? Please let me know. Thanks for any help.

Use the add windows feature from the windows control panel.
Or use PowerShell:
Add-WindowsFeature BITS
Here is a list over all the prereqs you need to install:
http://ccmexec.com/2013/01/powershell-script-to-install-configmgr-2012-sp1-prereqs-on-server-2012/
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

How to install Flashplayer 16 ActiveX-Plugin on Windows Server 2008R2 Terminalserver via SCCM

Hi there,
How to install the Plugin on Terminal Servers in generell. I tried it with the msi, which doesn't work for All Use.
System:
Windows Server 2008 R2 with Internet Explorer 11 - Terminal Services enabled.
Is there any advise, how to do it on Terminal Servers for All Users?
Thanks in advance
Regards Oliver

Hi there,
How to install the Plugin on Terminal Servers in generell. I tried it with the msi, which doesn't work for All Use.
System:
Windows Server 2008 R2 with Internet Explorer 11 - Terminal Services enabled.
Is there any advise, how to do it on Terminal Servers for All Users?
Thanks in advance
Regards Oliver

How To: Install a Client Agent link broken

I wanted to know if there was a new version of the agent and found the link broken
[Quote]
When you select an agent from the table of sync groups and sync agents on the SQL Data Sync landing page, you go to the sync agent page.
SQL Data Sync Client Agent
When you select a client agent from the SQL Data Sync landing page, three buttons appear at the bottom of the page.
REFRESH
MANAGE KEY
Create a new agent key. After you create an agent key, launch the agent and submit the new key value.
DELETE
Delete the selected client agent.
For more information on Client Agents, see the topics
How To: Install a Client Agent,
How To: Register a SQL Server database with a Client Agent, and
How To: Change an Agent's Key on MSDN.
[/Quote]
I keep getting redirected to http://www.microsoft.com/fr-fr/default.aspx

Hi,
Thank you for the feedback. I will have the relevant team notified.
You can have a check on the below link for SQL Data Sync (Preview) Client Agent.
http://msdn.microsoft.com/en-us/library/azure/jj823137.aspx
Regards,
Mekh.

How to install System Centre Service Manager Console on any PC

Hi, I'm new to the forum, and am trying to get SCSM installed into the organisation for Servicedesk purposes.
According to several pieces of documentation, I should be able to "manually install the Service Manager console as a stand-alone piece on a computer". However, I am unable to find any documentation or instructions on how to install a fat console on a PC.
Can someone help me with the instructions.
I understand that future versions could well include an Analyst Webportal, which hopefully will mature the Analyst environment significantly (currently with CR support on portal only, and having to use console is far from ideal.)

We had created a SCCM package to deploy SCSM 2010 SP1 console to user's PC. I also found someone post the following URL for SCSM 2012:
Service Manager Console Installation via Configuration Manager
http://blogs.technet.com/b/servicemanager/archive/2012/04/05/service-manager-console-installation-via-configuration-manager.aspx

Install SCCM Client Post Install via MDT 2013

I want to know best practice on how to install the SCCM client via MDT 2013 as a post install task sequence? Im deploying a lot of machines via MDT offline USB....
Is it grabbing the ccmsetup folder and using the following command line?
ccmsetup.exe /noservice /MP:<insert> SMSSITECODE=<insert> smscachesize=10000

There's no such thing as a "best practice" for most real-world tasks; real-world is different for everyone which means you need to know the details and choose the right things for your environment.
You need to run the command-line that is appropriate for your environment just like you would for any manual install.
Without knowing any details about your environment, I would add the SMSMP and FSP properties to the above command-line. If this is truly an offline install, you shouldn't use /mp though, you should use /source and point it at the client directory.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
I now am very confused, how will I open it? I do not have adobe bridge! After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
My question is, do you still need adobe bridge installed in order to use camera raw?
If yes, how does it work? How am I suppose to open camera raw?
If no, how am I going to open camera raw without bridge?
And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
I badly need help!

WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

mini graphics to vga adapter for macbook how to install in windows 7.
i have macbook with windows 7 operating system.

Can you be more specific?
What are you trying to do?

How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 4   Checksum: 03    Passed
        MBR Sector 3 Index: 5   Checksum: FD    Passed
        MBR Sector 4 Index: 6   Checksum: 58    Passed
        MBR Sector 5 Index: 7   Checksum: 96    Passed
        MBR Sector 6 Index: 8   Checksum: 7F    Passed
        Data Sector Index: 3   Checksum: F1    Passed
        Original MBR Index: 2   Checksum: BD    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
        Boot Config: 2 (Service Partition containing two Service OS's)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   239 255 255           63    301296177
1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
2   0x00   0x00      0   0   0     0   0   0            0            0
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...

Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 11 Checksum: 03    Passed
        MBR Sector 3 Index: 12 Checksum: FD    Passed
        MBR Sector 4 Index: 13 Checksum: 58    Passed
        MBR Sector 5 Index: 14 Checksum: 96    Passed
        MBR Sector 6 Index: 15 Checksum: 7F    Passed
        Data Sector Index: 10 Checksum: 01    Passed
        Original MBR Index: 9   Checksum: 12    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
        Boot Config: 0 (Service Partition containing one Service OS)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

How to install SCCM at Azure?

Similar Messages

Maybe you are looking for