How to know SP level

Hi people,
I´m confused and I want to know how to get the SP level on R3 4.7 Enterprise 110.Which component I look?
Thanks.

Yes, I see. But there is some level in particular that I have to fix? If I'm going to service.sap.com in SP I have to indicate a source SP and SP TARGET, which I look?
You won't find reference for the stack level in SAP. Basically you'll need to compare your current SP level with the stack information at SAP Marketplace in order to find out which stack are you currently on... after that you can select the target stack to take the system to the latest appove stack. (then write it down so you won't forget the next time )
Regards
Juan

Similar Messages

How to know what level of optimization to use / which symbols to remove

I probably should have asked this question along time ago, but how do you know what level of optimization to use and what symbols you can safely remove when compiling

EDLundquist wrote:
I probably should have asked this question along time ago, but how do you know what level of optimization to use and what symbols you can safely remove when compiling
I have no direct experience with development for Macs, but based on my experience on other platforms, I'd use lower optimization and symbol removal early in the debugging process, increasing those as the program becomes more stable.

How to know Optimizer level patch

Hi people,
I want to know what level patch has my optimizer. How do I know?
More thanks.

Hi
Goto /Usr/sap/sid/sys/exe/run then right click any one of the optimizer exe file (for example VSROPSCR.EXE ) and go to properties->version-> Right side Click on Version.you can able to see.
All the Best
Suresh Goli
Sap Netweaver Consultant

How to know querry level fields from which tables in the source system

Hi Experts,
let's say we've two fields in the querry e.g: Actual GI Quantity, Actual Value of GI
This fields from PP Querris level how would i know from which table we're getting data is there any easy process to find out please drop your suggestions..
Next doubt is when generate querry e.g. PM Module we don't know exatly what're the available tables & fields technical names but in my currently project using SAP Delivered Infocubes & Querries at the moment & generating querries but when we test in the Portal it's shows some fields '0', X. I've to check in source system weather it's having any values or not.
Can anybody drops your valuable words
Cheers
Suresh

Hi all,
I'm a colleague of Maarten, and I think maybe we didn't explain well enough what we want. So let me try to elaborate:
We want to obtain the reference (within the SOAP-Body of the XI-message) to the attachment which contains the main payload (at least, in XI itself). This reference seems to have gone missing, once our adapter module (after having gone through XI) is entered (and, by the way, before we enter the SOAP-receiver-adapter).
The JAVA-representation of the XI-message seems to hide the fact that in XI itself, the main payload is an attachment, referenced from within the SOAP-Body.
Nevertheless, we would like to obtain/retain(?) that reference, in order to put it in our own to-be-created-additional-attachment, which would go (via the PayloadSwapBean-module of SAP) into the SOAP-body of the final SOAP-call, and should then reference the 'new attachment' (which was (in XI itself) the main payload).
So, I think both answers (up to now) don't help us much (however: thanks for your reaction anyway of course).
So, maybe someone has another idea?
Regards, Fred

How to know Packing should be at Delivery level or shipment level?

Hello Experts,
As per my knowledge Packing can be done at delivery level and Shipment level but how to know at material should be packed at what level?
Thanks

Hi Prashant,
Normally we update Matl Grp Pack.Matls field in BASIC DATA 1 of Material Master in Packaging Material Data section.
Based on that details, you can get to know that if this needs to be Packed in What type of Material.
Depending upon your design of Packing you can get to know when should you do the packing.
Regards,
MJ.

How to know whether the Content Type at Library level is Inheriting Parent Content type or not Using Powershell?

Hi,
How to know whether the Content Type at Library level is Inheriting Parent Content type or not using Powershell?
Is there any property for that? Or Do I need to compare the Content type Id's at Site collection level and Library level?
Any help would be greatly appreciated.
Thank you,
AA.

Hi Ashok,
For a content type, there is an attribute called Inherits, the value of this attribute determines whether the content type inherits fields from its parent content type when it is created.
If Inherits is TRUE, the child content type inherits all fields that are in the parent, including fields that users have added.
If Inherits is FALSE or absent and the parent content type is a built-in type, the child content type inherits only the fields that were in the parent content type when SharePoint Foundation was
installed. The child content type does not have any fields that users have added to the parent content type.
More information, please refer to the link:
https://msdn.microsoft.com/en-us/library/office/aa544268.aspx?f=255&MSPPError=-2147217396
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to know whether database(oracle) is up and running at OS level

how to know whether database(oracle) is up and running at OS level...!!!

depends on the O/S you are using, Unix or Windows? I would use Korn shell script to monitor the Oracle background process and scripts to check of Oracle is accepting connections.
This UNIX command will show the number of processes for your instance:
ps -ef|grep $ORACLE_SID|grep -v grep|grep -v ora_|wc u2013l
In Windows I would look into services.msc

How to know the parent material in BOM if we know the last level material

Dear all,
We have around 40000 material codes with 18 digits. We can't remember all these. If we know the material code, we can easily find out sublevel or downlevel material by CS03,CS11 ,.....
But if we know the material code , how to find upper level material code in BOM ?
How to know the parent material in BOM if we know the last level material ?
Pl' answer.

Hi Kishore,
Have u tried with report CS15. Give last Level Material ->goto nect Screen->select "Multi level " check box then excute.
it will give All Parent material of Last material, u can indentify with BOM level NO.
regards
pradeep

How to get first level BOM material if I know 4th level material code only?

Dear all,
I have 4th level BOM material only. How to find first level ( finish material) BOM material ?
We can find bottom level material easily through CS11 if we know top level material.
But how to find top material if we don't know ? we know only bottom most material.........
Thanks....

Kishore,
Multiple runs of "CS15" will help you.
Regards,
Prasobh

How do I know the level when I click an item in the tree?

Hi,
 When I click a tree node in tree component, how do I know the level of this item?
 E.g., if I click the root node, then I get the level number 1, if I click second level node, I get the number 2 etc.
 Thanks!

Hi,
You can get to know the level of a tree by the ID of its node.
Like,what i did was,In the layout,
<htmlb:treeNode id = "root"
 text = "MRF LIST"
 isOpen = "true">
 <htmlb:treeNode id = "node1"
 text = "MRF's To Be Processed"
 isOpen = "true"
 tooltip = "MRF's to do"
 toggle = "X">
<%data :tab_0 type ZDI_MRF.%>
 <%loop at tab_mrf_0 into tab_0.%>
 <htmlb:treeNode id = "node1<%=sy-tabix%>"
 text = "<%=tab_0-MRF_NUM%>"
 image = "@02@"
 onNodeClick="show">
 </htmlb:treeNode>
 <% endloop.%>
By this,on node click in onInputProcessing,we can process it as
if event->id = 'myTree1' and event->event_type = 'click'.
 data : t_event type ref to cl_htmlb_event_tree.
 t_event ?= event.
 temp = t_event->node.
 if strlen( temp ) ge '6'. 
 data : x type string ,
 tab type zdi_mrf.
 if temp ca 'node1%'. 
 split temp at '1' into x node1.
 endif.
By this you can get the length of the ID and hence get the level,say id strlen( temp ) = 4 ,then node = root ,if strlen( temp ) = 5 ,then level 1.
Maybe you can do something similar.
Hope this helps,
Regards,
Siddhartha

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
 O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
 /↑\ Fks
 O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
 ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
 child.constraint_name fk,
 child.table_name child,
 child.r_constraint_name pk,
 father.table_name father
 from all_constraints father, all_constraints child
 where child.r_owner = father.owner
 and child.r_constraint_name = father.constraint_name
 and father.constraint_type in ('P', 'U')
 and child.constraint_type = 'R'
 and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
 and child.table_name = aux.child
 and father.constraint_name = aux.pk
 and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, IN RED):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
 identified by philips';
select granted_role bulk collect
 into cRoles
 from user_role_privs
 where username = user;
for i in cRoles.first .. cRoles.count loop
 execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
 constraint root1_id_pk primary key(root1_id)
 enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
 before delete or insert or update on philips.root1
 begin
 null;
 end;
create table philips.root2(root2_id number,
 constraint root2_id_pk primary key(root2_id)
 enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
 before delete or insert or update on philips.root2
 begin
 null;
 end;
create table philips.node1(node1_id number,
 root1_id number,
 node2_id number,
 node4_id number,
 constraint node1_id_pk primary key(node1_id)
 enable,
 constraint n1_r1_id_fk foreign key(root1_id)
 references philips.root1(root1_id) enable,
 constraint n1_n2_id_fk foreign key(node2_id)
 references philips.node2(node2_id) enable,
 constraint n1_n4_id_fk foreign key(node4_id)
 references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
 before delete or insert or update on philips.node1
 begin
 null;
 end;
create table philips.node2(node2_id number,
 root1_id number,
 node3_id number,
 constraint node2_id_pk primary key(node2_id)
 enable,
 constraint n2_r1_id_fk foreign key(root1_id)
 references philips.root1(root1_id) enable,
 constraint n2_n3_id_fk foreign key(node3_id)
 references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
 before delete or insert or update on philips.node2
 begin
 null;
 end;
create table philips.node3(node3_id number,
 root2_id number,
 constraint node3_id_pk primary key(node3_id)
 enable,
 constraint n3_r2_id_fk foreign key(root2_id)
 references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
 before delete or insert or update on philips.node3
 begin
 null;
 end;
create table philips.node4(node4_id number,
 node2_id number,
 constraint node4_id_pk primary key(node4_id)
 enable,
 constraint n4_n2_id_fk foreign key(node2_id)
 references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
 before delete or insert or update on philips.node4
 begin
 null;
 end;
-- out of the relational model
create table philips.node5(node5_id number,
 constraint node5_id_pk primary key(node5_id)
 enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
 before delete or insert or update on philips.node5
 begin
 null;
 end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
 aExportTablesPhilips utl_file.file_type := null; -- file to write DDL of tables
 aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
 aExportIndexesPhilips utl_file.file_type := null; -- file to write DDL of indexes
 aExportGrantsPhilips utl_file.file_type := null; -- file to write DDL of grants
 aExportTriggersPhilips utl_file.file_type := null; -- file to write DDL of triggers
 sDirectory varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
 cTables udt_tables; -- collection to store table names for the relational depth
begin
 -- omits all referential constraints:
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
 -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
 -- append a SQL terminator (; or /) to each DDL statement:
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
 -- create/open files for export DDL:
 aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
 aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
 aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
 aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
 aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
 select d.table_name bulk collect
 into cTables -- collection with the names of tables in the schema philips
 from all_tables t, philips.dictionary d
 where owner = 'PHILIPS'
 and t.table_name = d.table_name;
 -- execution
 sp_seeks_ddl(aExportTablesPhilips,
 aExportReferencesPhilips,
 aExportIndexesPhilips,
 aExportGrantsPhilips,
 aExportTriggersPhilips,
 cTables);
 -- closes all files
 utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips in utl_file.file_type,
 aExportReferencesPhilips in utl_file.file_type,
 aExportIndexesPhilips in utl_file.file_type,
 aExportGrantsPhilips in utl_file.file_type,
 aExportTriggersPhilips in utl_file.file_type,
 cTables in out nocopy udt_tables) is
 cDDL clob := null; -- colletion to save DDL
 plIndex pls_integer := null;
 sTableName varchar(30) := null;
begin
 for i in cTables.first .. cTables.count loop
 plIndex := i;
 sTableName := cTables(plIndex);
 * Retrieves the DDL and the dependent DDL into cDDL clob *
 * for the selected table in the collection, and writes to file.*
 begin
 cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportTablesPHILIPS, cDDL);
 exception
 when dbms_metadata.object_not_found then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportReferencesPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportIndexesPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportGrantsPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportTriggersPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
 cDDL in out nocopy clob) is
 pLengthDDL pls_integer := length(cDDL);
 plQuotient pls_integer := null;
 plRemainder pls_integer := null;
begin
 * Register variables to control the amount of lines needed *
 * for each DDL and the remaining characters to the last row. *
 select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
 into plQuotient, plRemainder
 from dual;
 * Join DDL in the export file. *
 * ps. 32766 characters + 1 character for each line break. *
 -- if the size of the DDL is greater than or equal to limit the line ...
 if plQuotient >= 1 then
 -- loops for substring (lines of 32766 characters + 1 break character):
 for i in 1 .. plQuotient loop
 utl_file.put_line(aExport, substr(cDDL, 1, 32766));
 -- removes the last line, of clob, recorded in the buffer:
 cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
 end loop;
 end if;
 * If any remains or the number of characters is less than the threshold (quotient = 0), *
 * no need to substring. *
 if plRemainder > 0 then
 utl_file.put_line(aExport, cDDL);
 end if;
 -- record DDL buffered in the export file:
 utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?

How to know whether any item value got changed

How to know in Apex whether any form item got changed. That will help me to know when the user will be pressing the "Apply Changes" button and I will popuplate the "User Modifed" and "Date Modifed" column values in the table. For now, I dont want to write database triggers, but to implement it at application level.

Hi Deb
For a really good explanation of the naming /numbering of tabular form items see Patrick Wolf's blog on the matter.
http://www.inside-oracle-apex.com/which-tabular-form-column-is-mapped-to-which-apex_applicationg_fxx-array/
He also gives a simple example of using check-boxes in tabular forms here
http://www.inside-oracle-apex.com/checkboxes-in-tabular-forms-the-easy-way/
You will notice in his example, that the apex_application.g_f40 is specifically named as 40 - a high number assuming that you don't have more than 39 editable columns in you tabular form - shown in the name="f40" code.
<input type="checkbox" #ADMIN_USER_CHECKBOX# value="#ROWNUM#" name="f40" id="f40_#ROWNUM#"/>#ADMIN_USER_CHECKBOX#
In essence the columns are numbered (only the editable ones) in the order in which they appear in the select statement - so the first editable column will be f(01), next f(02) etc - except where the column is specifically named - in this case f(40).
I had a situation where I wanted to programatically stamp the user's name into a column depending on whether the user checked a check-box in each row.
But if the column is editable and visible, then the user is free to type into this cell - this I wanted to avoid.
Something that took me a while to work out is that you can hide an editable column - so it can updated by your procedure code - not by the user!
The way to solve this is to have the sql statement select the relevant column twice - the first one is the editable one and hidden, and the second copy is a normal report column - displayed but not editable.
I used Patrick's example in the link above to set up my tabular form with the first column as a check-box.
The user then marks the desired rows by clicking in the check-box and submits / saves.
The procedure then detects which rows have been checked - updates the editable (but hidden) database column, and then re-displays the result - with the second copy of the same column now showing the updated value!
I hope this helps.
Look at Patrick's other postings - they are so helpful.
Mike

How to know when the PRICE AFTER DISCOUNT changed and get the value

Hi,
Everything I do to see if a value changed in the grid works except for PRICE AFTER DISCOUNT
which seems to be inaccessible.
Any idea how to know when exactly this value changed and do actions accordinly ?
Also I always get 0.00 if I try to get the value of it
This works to get in the condition of a vlaue changing but I always get 0.00 as the value of the column
if (pVal.ItemUID == "38" && pVal.ColUID == COL_DISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_DISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
    catch (Exception ex)
        SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");
And this do not even get into the condition even tought I SEE the column PRICE AFTER DISCOUNT:
if (pVal.ItemUID == "38" && pVal.ColUID == COL_PRICEAFTERDISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_PRICEAFTERDISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Price after discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
     catch (Exception ex)
         SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");

just idea, maybe it will works
Create one udf in row level and set there FS based on changes on price after discount and fill value what is in price after discount. Then the validation make on this field instead of standard SAP field.

How to use "Adjustment Level " in automatic adjustments rule

Now we are setting up BPC for legal consolidation.
we use BPC 7.0MS SP4 Version.
I want to use some result of automatic adjustment rules for source data, so I tried to use adjustment level in automatic adjustments rules.
I was setting up A rule's (to use source data) adjustment level is 0 and B rule's level is 1,
the result of SPRUNCONSO were "Error" CSD-150 and CSD-160.
Please let me know how to use adjustment level option.
Thanks.
Edited by: tae-youn.kim on Dec 14, 2009 3:20 AM

Hello :
CSD-150
Check the method between METHOD Table and your ownership Cube. Check your Rules between the RULES Table and The ELIM Table. Check The INTCo.
Regards,
SANJAY

From report server database how to know reporting services server

from report server database how to know reporting services server
Thanks

Hi Ajay,
If I understand correctly, you want to know
Reporting Services server name based on report server database. Based on my research, I find that the Reporting Services server name is the computer name which install the report server. So we can try to click Start button, right-clicking Computer,
and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
Besides, the report server database is a SQL Server database that stores the following content:
Items, Subscription and schedule definitions, Report snapshots and report history, System properties and system-level security settings, Report execution log data, Symmetric keys and encrypted connection and credentials for report data sources.
For more information about report
server database, please refer to the following link:
http://technet.microsoft.com/en-us/library/ms156016.aspx
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support

How to know SP level

Similar Messages

Maybe you are looking for