How to left aligned fields label of panel form
hi am in jdeveloper 11.1.1.6.0, how can i left aligned fields label of panel form
this is my form,where must i put this af|panelFormLayout::label-cell {text-align: left;}
<af:panelFormLayout id="pfl6">
<af:inputText value="#{bindings.Username.inputValue}"
label=" Username"
required="#{bindings.Username.hints.mandatory}"
columns="#{bindings.Username.hints.displayWidth}"
maximumLength="#{bindings.Username.hints.precision}"
shortDesc="#{bindings.Username.hints.tooltip}" id="it26">
<f:validator binding="#{bindings.Username.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.Firstname.inputValue}"
label=" Firstname"
required="#{bindings.Firstname.hints.mandatory}"
columns="#{bindings.Firstname.hints.displayWidth}"
maximumLength="#{bindings.Firstname.hints.precision}"
shortDesc="#{bindings.Firstname.hints.tooltip}" id="it21">
<f:validator binding="#{bindings.Firstname.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.Surname.inputValue}"
label=" Surname"
required="#{bindings.Surname.hints.mandatory}"
columns="#{bindings.Surname.hints.displayWidth}"
maximumLength="#{bindings.Surname.hints.precision}"
shortDesc="#{bindings.Surname.hints.tooltip}" id="it28">
<f:validator binding="#{bindings.Surname.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.Initials.inputValue}"
label=" Initials"
required="#{bindings.Initials.hints.mandatory}"
columns="#{bindings.Initials.hints.displayWidth}"
maximumLength="#{bindings.Initials.hints.precision}"
shortDesc="#{bindings.Initials.hints.tooltip}" id="it20">
<f:validator binding="#{bindings.Initials.validator}"/>
</af:inputText>
<af:selectOneChoice value="#{bindings.Titlecode.inputValue}"
label=" Title"
required="#{bindings.Titlecode.hints.mandatory}"
shortDesc="#{bindings.Titlecode.hints.tooltip}"
id="soc6">
<f:selectItems value="#{bindings.Titlecode.items}" id="si12"/>
</af:selectOneChoice>
<af:selectOneRadio value="#{bindings.Gender1.inputValue}"
label=" Gender"
required="#{bindings.Gender1.hints.mandatory}"
shortDesc="#{bindings.Gender1.hints.tooltip}" id="sor6">
<f:selectItems value="#{bindings.Gender1.items}" id="si17"/>
</af:selectOneRadio>
<af:inputText value="#{bindings.Identitynumber.inputValue}"
label=" Identitynumber"
required="#{bindings.Identitynumber.hints.mandatory}"
columns="#{bindings.Identitynumber.hints.displayWidth}"
maximumLength="#{bindings.Identitynumber.hints.precision}"
shortDesc="#{bindings.Identitynumber.hints.tooltip}"
id="it25">
<f:validator binding="#{bindings.Identitynumber.validator}"/>
</af:inputText>
<af:inputDate value="#{bindings.Dateofbirth.inputValue}"
label=" Dateofbirth"
required="#{bindings.Dateofbirth.hints.mandatory}"
shortDesc="#{bindings.Dateofbirth.hints.tooltip}" id="id3">
<f:validator binding="#{bindings.Dateofbirth.validator}"/>
<af:convertDateTime pattern="#{bindings.Dateofbirth.format}"/>
</af:inputDate>
<af:selectOneRadio value="#{bindings.Statuscode.inputValue}"
label="#{bindings.Statuscode.label}"
required="#{bindings.Statuscode.hints.mandatory}"
shortDesc="#{bindings.Statuscode.hints.tooltip}"
id="sor5">
<f:selectItems value="#{bindings.Statuscode.items}" id="si7"/>
</af:selectOneRadio>
<af:inputText value="#{bindings.Emailaddress.inputValue}"
label="#{bindings.Emailaddress.hints.label}"
required="#{bindings.Emailaddress.hints.mandatory}"
columns="#{bindings.Emailaddress.hints.displayWidth}"
maximumLength="#{bindings.Emailaddress.hints.precision}"
shortDesc="#{bindings.Emailaddress.hints.tooltip}" id="it22">
<f:validator binding="#{bindings.Emailaddress.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.Termsandconditions.inputValue}"
label="#{bindings.Termsandconditions.hints.label}"
required="#{bindings.Termsandconditions.hints.mandatory}"
columns="#{bindings.Termsandconditions.hints.displayWidth}"
maximumLength="#{bindings.Termsandconditions.hints.precision}"
shortDesc="#{bindings.Termsandconditions.hints.tooltip}"
id="it24">
<f:validator binding="#{bindings.Termsandconditions.validator}"/>
</af:inputText>
<af:selectOneChoice value="#{bindings.Branch.inputValue}"
label="#{bindings.Branch.label}"
required="#{bindings.Branch.hints.mandatory}"
shortDesc="#{bindings.Branch.hints.tooltip}" id="soc5">
<f:selectItems value="#{bindings.Branch.items}" id="si11"/>
</af:selectOneChoice>
<af:inputComboboxListOfValues id="office1Id"
popupTitle="Search and Select: #{bindings.Office1.hints.label}"
value="#{bindings.Office1.inputValue}"
label="#{bindings.Office1.hints.label}"
model="#{bindings.Office1.listOfValuesModel}"
required="#{bindings.Office1.hints.mandatory}"
columns="#{bindings.Office1.hints.displayWidth}"
shortDesc="#{bindings.Office1.hints.tooltip}">
<f:validator binding="#{bindings.Office1.validator}"/>
</af:inputComboboxListOfValues>
<af:inputText value="#{bindings.Ausername.inputValue}"
label="#{bindings.Ausername.hints.label}"
required="#{bindings.Ausername.hints.mandatory}"
columns="#{bindings.Ausername.hints.displayWidth}"
maximumLength="#{bindings.Ausername.hints.precision}"
shortDesc="#{bindings.Ausername.hints.tooltip}" id="it23">
<f:validator binding="#{bindings.Ausername.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.PractitionerNumber.inputValue}"
label="#{bindings.PractitionerNumber.hints.label}"
required="#{bindings.PractitionerNumber.hints.mandatory}"
columns="#{bindings.PractitionerNumber.hints.displayWidth}"
maximumLength="#{bindings.PractitionerNumber.hints.precision}"
shortDesc="#{bindings.PractitionerNumber.hints.tooltip}"
id="it27">
<f:validator binding="#{bindings.PractitionerNumber.validator}"/>
</af:inputText>
</af:panelFormLayout>
Similar Messages
-
How to right align a read only numeric field in a panel form layout
Hi, does anyone know how to right align a read only numeric field in a panel form layout? I am using: Style Class = AFFieldNumberMarker, but it only seems to work if the field is disabled. Disabling the field gives it a difference appearance that does not look right on our forms. These are calculated fields, which cannot be modified, so read only is necessary.
I have looked online for some answers, and it seems that others are having similar issues.
I have tried different combinations for the properties, but so far I cannot get it to work.
Thanks
Judy
I am using JDEV 11.1.1.5Sorry for the delay in my response. Here is the code
<af:inputText value="#{bindings.TotalAirlineCostEst.inputValue}"
label="#{bindings.TotalAirlineCostEst.hints.label}"
required="#{bindings.TotalAirlineCostEst.hints.mandatory}"
columns="#{bindings.TotalAirlineCostEst.hints.displayWidth}"
maximumLength="#{bindings.TotalAirlineCostEst.hints.precision}"
shortDesc="#{bindings.TotalAirlineCostEst.hints.tooltip}"
id="it20" readOnly="false"
disabled="true"
styleClass="AFFieldNumberMarker">
<f:validator binding="#{bindings.TotalAirlineCostEst.validator}"/>
<af:convertNumber groupingUsed="true"
pattern="#{bindings.TotalAirlineCostEst.format}"
type="number"
maxFractionDigits="0"/>
</af:inputText>
thank you,
Judy -
How to add new fields to the system form (Ex.expenses to a/r invoice form)
hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQIf I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.
-
How to change the Field Symbol, so Adobe Forms takes it as a Table?
Hi guys,
I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
I looked at Adobe Form, and found this:
The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
Does someone have any idea?Hello Taly,
To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
You have done it correct partially. I have replicated your scenario and steps are below -
1) Create a Z structure
2) Create Z Table Type
3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
4) Design Form as -
5) Code driver as -
*& Report ZR_AF_FS_1
REPORT zr_af_fs_1.
DATA: fm_name TYPE rs38l_fnam,
fp_docparams TYPE sfpdocparams,
fp_outputparams TYPE sfpoutputparams,
it_kna1 TYPE ztt_fs_1.
* Sets the output parameters and opens the spool job
CALL FUNCTION 'FP_JOB_OPEN' "& Form Processing: Call Form
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME' "& Form Processing Generation
EXPORTING
i_name = 'ZAF_FS_1'
IMPORTING
e_funcname = fm_name.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*-- Fetch the Data and store it in the Internal Table
SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
* Language and country setting (here US as an example)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
*&--- Call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
it_data = it_kna1
* IMPORTING
* /1BCDWB/FORMOUTPUT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Close the spool job
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
6) Output -
BR. -
How to right align s:Label inside a s:controlBarContent ?
My spark app has a control bar at the top and i want to right-align a label inside it so my button bar is on the left and my label is on the right. I tried using the 'horizontalAlign="right"' which works find inside a s:panel but not inside a s:controlBarContent. Does anyone have any idea how to achieve this please? Also, the flash builder 4 ide won't let you move the label over in design mode either...
Thanks for your help,
Regards,
Mark.I figured it out myself. I added an s:Hgroup around my label and set width="100%" and horizontalAlign="right" you need to set the width to 100% otherwise you're just right aligning within the actual width of the component (which is pretty useless eh?).
I hope this helps someone else too.
Regards,
Mark. -
JLabel: How to Left Align the text
Hi.
I created a JLabel and wanted to left align the text. However, the text is always centered in the frame that contains it. Can you tell me what I need to add to the code?
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.Frame.*;
public class S extends JFrame
public S()
setSize(300, 300);
setTitle("Title Bar");
setResizable(false);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JLabel label = new JLabel("A label", JLabel.LEFT);
label.setHorizontalAlignment(JLabel.LEFT);
label.setToolTipText("Should be left aligned");
JPanel pane = new JPanel();
pane.add(label);
setContentPane(pane);
public static void main(String[] args)
S f = new S();
f.show();
}Thanks
RajaRead this section from the Swing tutorial on "Using Layout Managers":
http://java.sun.com/docs/books/tutorial/uiswing/layout/using.html
Layout Managers layout the components based on rules for each layout manager.
By default a JPanel uses a FlowLayout. By default FlowLayout aligns components in the center of the space allocated to it. In your case you allocated 300 to the width of the frame, therefore the panel has a width of 300, therefore the label is centered in the 300 pixels. -
How to left align in Stationary?
How can I left align my text in the Stationary? I used to have a default "style" that had left text in iPhoto, but that doesn't seem to work.
Any tips on how to use the "style" feature in general is also appreciated!
Thanks.Try
Align text flush left Shift-Command-left curly brace ( { )
Worked for me
For more editing shortcuts visit
http://www.apple.com/support/iweb/shortcuts/ -
How to change the field labels from English to German language.
Hi Experts,
I have added 2 more fields for the output of the standard transaction ME2L.
I have added in English Language. Now i want to display those field labels in German Language.
How can i get this.Please help.
Thanks in Advance.
Jyothi.Jyothi,
The problem was solved?
If so, can you close the message?
Best regards,
Rafael Sá -
How do you change fields labels in adf query please ?
Hello , I would like to change the field labels in an adf query as they have been generated by default by oracle .
The only code found is as follows :
<af:query id="qryId1" rows="6" headerText="Search" disclosed="true" maxColumns="2"
value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}">
<af:inputText value="#{bindings.PrtDesc.inputValue}" label="Desc"
required="#{bindings.PrtDesc.hints.mandatory}"
columns="#{bindings.PrtDesc.hints.displayWidth}"
maximumLength="#{bindings.PrtDesc.hints.precision}"
shortDesc="#{bindings.PrtDesc.hints.tooltip}" id="it3">
<f:validator binding="#{bindings.PrtDesc.validator}"/>
</af:inputText>
</af:query>Hi,
if you use ADF BC, set the UI Hints on the View Object attributes for the attributes and these will make the labels
Frank -
Field labels in user forms.
Hi All,
I am new to IdM. In some of the forms, I am seeing field titles given as FMFIRSTNAME, FMLASTNAME, FMACCOUNT_ID etc. I guess these are some constants. From where the values of these constants are set ?. I mean, if I want to change the field labels, how can I change these values? Requesting your help in this regard.
Thanks.These are stored in the message catalog that is associated with the currently selected locale. Search through the documentation for message catalog information to see where the existing values are stored and how to create your own custom message catalog so that the form labels are not hard-coded into the actual form (thus allowing multi-language deployments).
-
How to enable a field on the person form?
Hello,
I am working in UK Legislation and I need to enable a greyed out field on the person screen. It's the "Disabled" field (to capture the disability of an employee).
This might sound an easy thing to do but I couldn't find any function or profile option that controls this. I couldn't find any metalink note on this. Could any one tell me how to do this or let me know of any metalink note on this?
Many Thanks,
BalooBoth answers were helpful. Thanks a lot.
In the interest of other users I am pasting the answer below:
The Disability Discrimination Act 1995 (DDA) is the main piece of legislation which makes it unlawful to discriminate against a disabled person in their terms of employment, promotion opportunities, by dismissing them or by subjecting them to any other detriment. This act had been further amended, cumulating in the Disability Discrimination Act 2005 which is related to disability generally and extends outside the area of employment although some provisions will relate to employees.
Parts of the Act came into force in December 2005, other parts relating for example to transportation are applicable from December 2006. The above provisions replaced the concept of Registered Disabled Persons and
employment quotas which had been in existence since after the second world war.
In releasing the enhanced Disabilities functionality, it was intended to facilitate the maintenance of disability records through the Disability form and not the Disabled field on the person form. -
I have the Adobe Reader x 10.0.1. Free version.
I downloaded a PDF form and open the document but cannot fill in any of the fields. With the form opened I look at File/Properties/security which shows "Filling of the form fields": Allowed.
I do not find "Typewriter" under view.
How can I type in to fill the fields
RegardThe window snip will let you see:
-
How to read data/fields of the pdf form
Hi,
i want to orchestrate a process where input is interactive forma and output is xml data.
i mean i want to read data/fields of the pdf form.
Which activity do i use on workbench.
Regards
SunilDieter,
I am talking about 3rd senario, where we create one process on workbench, and pass filled pdf as input and then output of process is xml file.
What is the process name here (Like renderPDF process) which extract data from pdf.
regards
Sunil -
How to left align the signature field of dynamic pdf
Hi,
I am working on dynamic (interactive) pdf and using Adobe LiveCycle Designer (Adobe Acrobat 9 Pro). My problem is that I cannot align left the signature field of my pdf. I can align left, right and center for textboxs and cannot just do that for signature field. When I couldn't do that from GUI I went to XML code for signature and tried this:
<para hAlign="left"/> but it still didn't work. Ideally it should have worked.
I would really appreciate if you could help me.
Regards,
KiranUse skinning. Use the following skin selector:
af|panelFormLayout::label-cell {text-align: left; }If you want to apply it only on particular panelFormLayout, then set a custom styleClass on the given <af:panelFormLayout> tag (for example, <af:panelFormLayout styleClass="MyStyleClass" ... >) and use a styleClass-dependent skin selector:
af|panelFormLayout.MyStyleClass::label-cell {text-align: left; }Adding a custom skin is easy. If you do not know how, see this topic in the documentation: 20.2 Applying Custom Skins to Applications
Dimitar -
How to change the field label text in standard WD application
Hello All,
I have a requirement to change the filed label text in standard WebDynpro application.
Application Name: /SAPSRM/WDC_UI_DO_BIDDER
View: V_DO_BIDDER_SEARCH_C
I want to change the label text from "Last Name" to "Vendor Name".
Can anyone please provide me the possible options to change label text?
Thanks in Advance.
Regards,
ShyamThread closed...Found the solution ...
Maybe you are looking for
-
We are facing problem crystal report in client pc.
Hi, we installed SAPCrystalSetup.exe and .net frame work 3.5 in client pc with successfull but when we are giving print prieview through manage crysat reports it's showing error:could not load file or assemble crystal decisions.windows.forms,versi
-
Hi, i have try to made a Cluster Build component using a data set of 14000 record of a table with 40 columns. Every column is a varchar2(256). Running components I obtain is the folloqing error in the data mining browser. ORA-01401: inserted value to
-
Hit Power On, hear faint clicks, screen stays black. Dead HD?
My son's MacBook won't start up. When I turn it on, I can barely hear some faint clicks spaced about 1 or 2 seconds apart and the screen stays off. What are the chances this is a bad HD? Also, I've got a MBP and both my machine and my son's MB take s
-
Clicking F1 in compiled help does not expand the TOC
When I pretend I am a user of the online help system I have developed using MS HTML Help, the relevant page opens but the TOC doesn't expand to expose the page name on the left. Is this a limitation of the HTML Help program?
-
Hello. Has anyone had Flash videos go blank and act weird as shown in http://i.imgur.com/GugQV05.gif as an example? I have to either exit/quit SeaMonkey or kill Flash's plugin-container.exe process. I did not have this problems with older Flash versi