How to link Inq,QT to Trading Contract in GTM

Hi Experts,
I am new to Global Trade Management (GTM).
Is it Possible to link a Quotation to a PO or SO document which are created using a trading contract(WB21) in GTM??
Is there any BAdIs or enhancements available in SAP to achieve the same?
Has anyone come across the same scenario??
Please help..
Regards,

Hi Johnathan,
Thanks for the reply.
Can you plz tell in which Forum I have to post regarding GTM. I couldnt find any separate forum for GTM as such in SDN.
Awaiting your response.
Regards,

Similar Messages

2 Purchase Orders against one trading contract in GTM

Dear All
This question is realted to GTM Module.
In our case for 1 Trading Contract 2 Purcahse Orders are created.Does anybody know the reason as to when 2 Purchase Orders are created against one Trading Contract.
Regards
VA

Hi
There is no duplication it is actually a quantity split.
If ther are 5 items in Trading Contract 4 got created in PO and 2nd in the following PO?
Regards

How to link Sales Order with Service Contract and then with Install Base?

Hi Friends,
1) I would like to know the integeration process from sales order to Service Contract and then with Install Base.
2) I couldn't see anything enabled in Service Tab in Order Lines, its grayed out. Is there any set up/profile option to get it enabled?
3) How can we create AR invoice from Service Contract?
Please let me know if anyone has idea on this.
Thanks in Adavance,
Vara

Dear Sid,
Thanks for your promt response.
Let me explain you what I did.
1) I have booked a Bill Only sales order which has one order line, mentioned it as Service Item and provided the same details in Service Tab in Order lines. Now Line status is "Fulfilled"
2) Then Submitted Workflow Back Ground Process for OM Order Lines and it has created an AR Invoice and closed the line
3) And then submitted "Service Contracts Order Capture Integration Program" from SErvice Contracts Responsibility and it completed normal.
4) Now I went in to Launch Contracts Window and queried with the sales order but couldn't see any contract created
5) Then I went in to Reprocess Order Window and found this order shows an error message as "Referenced Product not present in the Installed Base", then I tried to reprocessed it, but the same error message again.
Here I have few doubts:
1) Are the AR invoice and Service Contract Billing Invoices same?
2) In above scenario AR Invoice has been created, I would like to do the billing from SErvice Contracts and need to create an Invoice in AR? how can I do that?
because as you explained in one of my questions earlier, A Single Invoice can be created for the whole duration of the contract. I want to do that and trying for the same.
3) Regarding the above error message, how can I resolve it and create the service contract against that Order?
Thank you so much for your helpful answers.
Regards,
Vara

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

How to calculate or capture the Sub-Contracting Charges

In CK13N, How the Sub-Contract rate is derived.
Kindly the tell the derivation methodlogy for SubContract Rate.
Thanks in advance
K.Natarajan

Dear Natarajan,
1.For Sub-sontracted products ,the cost of that product = Raw-materials cost (which are sent to the third
party) + External processing cost(as per the cost mantained in ME11 for sub-contracting).So if the raw
materials cost is Rs 10 & the processing charges are Rs 25 means then the sub-contracted product cost
= 10+25 = Rs 35.
2. For sub-contracted Product you will be getting only the sub-contracting cost and not the manufacturing
cost.It will be having only raw material cost and sub-contracting charges.
Or do you want in this way?say X is a sub-contracted part and its made up of raw materials X1 & X2 and
once X is received ,its used for manufacturing Y ,So if you check the cost of Y it will having the sub-
contacted item (X) cost + Internal processing cost (operation cost for producing Y),so if you check for Y it
should show the split up of internal activity cost + sub-contracting charges +raw materials cost ?
3.For your information,if you check CK13N for your finished product which is produced using the Sub-
contracted product,then after giving the input and press enter ,then press F5,now you will get the exact
split up in which you were looking for.like processing cost ,conversion cost + material cost.
check the link - [Product Costing for Sub Contracted material|Re: Product Costing for Sub Contracted material]
Check & Revert back.
Regards
Mangalraj.S

How to link MM reports to SRM

Hi,
We want to see the subcontract stocks MBLB report to look for a particular vendor and material from SRM web browser.
Or how to link standard MM reports to SRM.
Any suggestions pl.
Reg,
Sridhar.

Hi
<b>Please go through the following links -></b>
Re: SAP SRM /MM Reporting with SAP BW
Adding Report link in SRM web page
SRM custom reports on Web
Re: Link Contract in SRM to R/3
Establishing a connection between SAP SRM and MM
Regards
- Atul

Outbound Idoc creation after Purchase Order Creation via Trading contract

Hi All,
Below is my requirement-
Purchase Order Will be created automatically through trading contract.
I need to pass some details about the purchase order created to the external system through IDOCS.
ie this idoc should get triggered whenever a Purchase Order is created through Trading contract.
Are there standard function modules which can trigger idoc whenever Purchase Order is created through Trading Contract?
Please suggest how to go about it.
Thanks in advance.

Hi Tejas,
Ask your functional consultant to create a new output type for this Purchase order. Attache RSNASTED program and EDI_PROCESSING routine to that output type.And also maintain partner profile for the partner to whom you want to send PO.There is a standard process code ME10 to send Purchase order data.Assign this process code and your new output type in the message control tab of the outbound partner profile view.Hope this helps.
Thanks & Regards,
Kalyan.

Sales trading contract process

I want to test the scenario for Sales trading contract.
Please let me know the steps. We use tcode WTEW.
In sales order flow I see delivery,GD goods issue & Invoice.

I have created outbound delivery via TEW from sales order.
Then I want to do PGI of the delivery but when I want to do it though vl02n.
I am getting error that document 123453642321 can be only changed through TEW.
How I can I do the PGI of this delivery.
in task under step I choose billing & I give delivery no. asuming that at this time pgi and billing will be done but after clicking on F8
I see select source document where it shows lines as blank.

How to link CRMD_ORDERADM_H and CRMD_ORDERADM_I

Hi,
I am new to CRM and I am not sure how to use the two tables CRMD_ORDERADM_H and CRMD_ORDERADM_I. What is the relation between the two tables? Can i use the GUID in CRMD_ORDERADM_H to get details from CRMD_ORDERADM_I? I am not sure how to link the two tables. I need to derive the confirmation number in a report that I am developing but the two tables are confusing me. Please help me with this.

Hi,
CRMD_ORDERADM_H gives header details of a transaction number(like service contract number, sales order number etc) and CRMD_ORDERADM_I gives item details.
Yes,both are linked by GUID.
Enter the transaction number in OBJECT_ID input filed in CRMD_ORDERADM_H and copy the GUID.
Then enter the copied GUID in HEADER field in CRMD_ORDERADM_I to get item details.
You can also use function module CRM_ORDER_READ to obtain all the information regarding a transaction number.
Regards
Anitha

How to link lease contarct to service contarct

Hi,
Could anyone please tell me how to link lease contarct to service contarct..what are the steps...through installed base..
Thanks

Yes, the installed base subline of the financial asset line points to the installed base item which can be then tracked back to the service line of a service contract directly, or to the usage line via an attached counter.

Did you know how to link the text in two or more text boxes?

Did anyone know how to link the text in two or more text boxes in Pages 5.0? Thanks for your answer.
Qualcuno sa come collegare il testo in due o più caselle di testo nella versione 5.0 di Pages. Grazie per le vostre risposte.

It's just one of the many, many features that have been eliminated or changed. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

How to link SAP Application to Digital Signature

Dear all,
As per the sap note 593041,594010 and 827417 we have done the config setting and executed program DSIG_BOOKING_EX
in tcode DSAL we are getting the message "Signature process was successfully completed by user" please suggest us
how to link this to any SAP application ( Ex. Check printing ,PO Printing.) we r using script for printing these application.
Regards,
Nikhil

Hi Nikhil,
please refer to this document:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0fbaa71-cd8d-2910-5982-e30626035400&overridelayout=true
Best wishes,
Jan

How to link a document in Framework

In CWB Home Page there is ability to link to various URL.
I know how to link to a Portal. But I need to link to a Document (Word or PPT) which is located in Shared Servers.
If this is possible , How do I write the full Path which includes the document?

Hi,
I am not sure whether I understood your requirement clearly.
If you just want to link a document to your service desk message, you can easily attach the document to the "attchmnt" tab of the "notif_create" transaction, if you are using "notif_create" to create your service desk message.
(ii) If you are using "crm_dno_monitor" transaction, then you can upload the document in the "documents" tab of this transaction.
(iii) But, if your requirement is that that you have to upload the document in the Solar01/Solar02 transaction and only have to link to your service desk message, then you can generate the URL of the uploaded document and attach it using the "My Network Places" button of the "Open File" dialog (that comes up by clicking the "export" button of the "attchmnt" tab of the "notif_create" transaction) and specifying the URL in the "File Name" field.
(iv) If the requirement is the same as in (iii), but if you use "crm_dno_monitor" transaction, the same procedure can be followed in the "documents" tab of this transaction or else we can also use the "create URL" button of the documents tab.
Hope you know the procedure for generating the URL of the uploaded document.
Dont forget to reward for useful answers.
Best regards,
Alagammai.

How to link Interactive fields in acrobat 9Pro

Hi Im new in this and I would like to now how to link interactive fields in acrobat.
lets say that I have 10 files (File1, File2, File3 etc......) and each file have the same COMBO BOX that display 5 options (option 1. option 2, option 3, option 4 and option 5), all 10 files have the same combo box with the same options, but i want to DELETE option 3 from each file.
So, how can I do it, beacuse right now I have to do it manually each file at the time, and in real I dont have 10 files I have 500.
Please I would appreciate any help.
Thanks.

I am not so sure yet but in the PLD properties window on general tab of SBO 2005A there is field name link to. its description is :
Creates a link between several fields, to determine if the system collectively displays or hides them. If a field is blank or hidden, its linked fields are not printed either.
To create the link, choose the Unique ID of the field to which you want to link the selected field.
If the field Total Liable in the document is set to zero there is no need to print the Tax, Discount, and Total fields. It is possible to link these fields to the field Total Liable by selecting its unique ID in the field Link to, found in each one of their Properties windows. This will then hide the fields when Total Liable is zero.
If a linked field is not yet calculated, the field is ignored.
Another example:
Steps for Version 2005A:
Link every existing field in the Repetitive Area
to itself (thisinlcudes hidden fields as well!)
add the following fields to the Repetitive Area
Field_1:
General Tab
untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content/Variable Tab
Variable No.: 157
Field_2:
General Tab
untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content Tab
Source Type: Formula
Field_1 ==' '
Increasethe Height of the Repetitive Area to allow placing the following field vertically below the exisiting fields of the Repetitive Area - tick Height Adjustment for the Area!
Field_3:
General Tab
Link to: Field_2
Left = / Width = / Top = / Height =
=> place vertically below the top row in the Repetitive Area
Format Tab
Line Break: Divide into Rows
tick Field Height Adjustment
Content Tab
Source Type: Database
Table: AR Invoice - Rows
Column: Text
Maybe it is what your are looking for.
BTw, Do not you have the custom PLD pdf file ? You could download it in the documentaiton resource center or requesting it to SAP partner.
Rgds,

How to link Interactive fields in Acorbat 9Pro?

Hi Im new in this and I would like to now how to link interactive fields in acrobat.
lets say that I have 10 files (File1, File2, File3 etc......) and each file have the same COMBO BOX that display 5 options (option 1. option 2, option 3, option 4 and option 5), all 10 files have the same combo box with the same options, but i want to DELETE option 3 from each file.
So, how can I do it, beacuse right now I have to do it manually each file at the time, and in real I dont have 10 files I have 500.
Please I would appreciate any help.
Thanks.

I am not so sure yet but in the PLD properties window on general tab of SBO 2005A there is field name link to. its description is :
Creates a link between several fields, to determine if the system collectively displays or hides them. If a field is blank or hidden, its linked fields are not printed either.
To create the link, choose the Unique ID of the field to which you want to link the selected field.
If the field Total Liable in the document is set to zero there is no need to print the Tax, Discount, and Total fields. It is possible to link these fields to the field Total Liable by selecting its unique ID in the field Link to, found in each one of their Properties windows. This will then hide the fields when Total Liable is zero.
If a linked field is not yet calculated, the field is ignored.
Another example:
Steps for Version 2005A:
Link every existing field in the Repetitive Area
to itself (thisinlcudes hidden fields as well!)
add the following fields to the Repetitive Area
Field_1:
General Tab
untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content/Variable Tab
Variable No.: 157
Field_2:
General Tab
untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content Tab
Source Type: Formula
Field_1 ==' '
Increasethe Height of the Repetitive Area to allow placing the following field vertically below the exisiting fields of the Repetitive Area - tick Height Adjustment for the Area!
Field_3:
General Tab
Link to: Field_2
Left = / Width = / Top = / Height =
=> place vertically below the top row in the Repetitive Area
Format Tab
Line Break: Divide into Rows
tick Field Height Adjustment
Content Tab
Source Type: Database
Table: AR Invoice - Rows
Column: Text
Maybe it is what your are looking for.
BTw, Do not you have the custom PLD pdf file ? You could download it in the documentaiton resource center or requesting it to SAP partner.
Rgds,

How to link Inq,QT to Trading Contract in GTM

Similar Messages

Maybe you are looking for