How to maintain inspection type at the time of material creation using LSMW

Hi All,
I have a differnet Issue.
I am using a std. LSMW to create the materials.
But now using same LSMW i have to maintain Inspection types(ART-RMQAM) for the materials to be created.
How this can be done.
This filed is not found in any structures like BGR....to  BMMH8
Can I create such a structure ??
Amol

Some need the hard answer: it is not possible in one go.
It is an embedded functionality in material master like classification, but it is not stored in a material master table.

Similar Messages

  • Division isn't coming at  the time of Material Creation

    Hi Guys,
    While creating a Material Master Division isn't coimg .
    Only Sales Org & Distribution Channel is coming,What is the Reason??
    Am I missing something??

    Hi Biswajit,
    Please note that "Division" is not an organisational unit when creating Material master as in the case of Customer Master.
    That is why you dont get to see Division as a paramater while creating Material master. Every material can only belong to one division.
    The following are the organisational units that work as a paramater while creating the material master -
    Sales org, Distr channel, Plant, Storage location.
    and according to the material type and industrial sector you select in the initial screen determine the material master views.
    you only select a division once you get into the screens of material master as every material has to belong to a division.
    Hope it was helpful.
    Thanks
    -Sai

  • How to check data type of the field symbol at run time

    Hi,
    My code is as following:
          LOOP AT <fs> ASSIGNING <wa_covp_ext>.
            ASSIGN COMPONENT 86 OF STRUCTURE <wa_covp_ext> TO <f_zzname>.
            IF sy-subrc = 0.
              ASSIGN COMPONENT 158 OF STRUCTURE <wa_covp_ext> TO <f_pernr>.
              IF sy-subrc = 0.
                  SELECT SINGLE sname INTO <f_zzname> FROM pa0001
                                WHERE pernr = <f_pernr>
                                AND endda GE sy-datum
                                AND begda LE sy-datum.
             ENDIF.
          ENDIF.
        ENDLOOP.
    This query is giving dump when <f_zzname> is type P length 8 and decimals 2, because it tries to put PA0001-sname into it which is type C length 30. So I want to check the type of <f_zzname> before the select statement. If it is character 30, then I will write the select statement else not.
    How to check data type of the field symbol at run time? If it's not possible, then can somebody suggest a workaround? Thanks.

    check this ...
    write describe statement  ...
    field-symbols : <f_zzname> .
    data : sname like pa0001-sname,
           typ(10).
    assign sname to  <f_zzname>.
    describe  field <f_zzname> type typ.
    write : typ. <-- typ contains character type in this case ..
    U can check if typ is of character(C) if so .. write the select statement ...

  • Can we create 2 inspection lots at the time of goods receipt.

    Hi experts,
         Can we create two inspection lots at the time of goods receipt from vendor.I will assign two inspection types in material master
    suppose 01,02.Both are releated to goods receipt.For one inspection lot when we take usage decision stock should not post into usage decision.for other inspection lot stock has to be posted.Is this possible?if possible how to do configuration?

    I think I made this recommendation in a previous post concerning this but this is exactly what reference operation sets are created for.
    Create the reference operation set for the characteristics that are used for all the materials.  You create this once.
    When you create the sepcific plan for the individual materials, you include the reference operation as one of the operations, (probably the first one in your case).  You don't have to add characteristics, modify or change it.  All the characeristics and settings come from the reference operation.  If you need to make a change you edit the reference operation and make the change once.   The change is immediately seen in all newly created inspection lots.
    In a second operation of the plan, you add the characteristics specific to the material.
    You can add different workcenters to the operations if you want.  That way you can set up security on the workcenters and control who can record results against which operations.
    Aside from creating lots manually, you can't create two lots at the same time from the same GR.
    Craig

  • Maintain Inspection type

    Hi,
    What is the tcode for Maintain Inspection type and how do we activate/deactivate Inspection types?
    thanks,
    bin

    Hi
    I hope there is no separate Tcode for it
    But you can do it from <b>SPRO
    Quality Management->Quality Inspection->Inspection Lot creation->Maintian Inspection Types</b>
    And all inspection types are stored in <b>TQ30</b> table
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Duplicate material entry at the time of PO creation based order type

    How Restrict duplicate material entry at the time of PO creation based on define order type.
    Moderator message: please do some research before asking.
    Edited by: Thomas Zloch on Mar 11, 2011 1:45 PM

    Hi Rahul,
    try with This Badi  ME_PROCESS_PO , Method Open or Process item,
    Implemente it and use a break-point to test it i.e it is triggred or nt , before processing it.
    Regards,
    Abhisek

  • How to get wage type for every time record

    Hi Pros,
          I am using DS 0CA_TS_IS_1, it includes report time type (0REPTT), but not have wage type. in CATSDB, I fied fields for attendance/absence type and wage type. but not every time record has wage type. can you please tell me how to get wage type for every time record? what is relation between reporting time type, attendance/absence type and wage typs?

    Hello,
    Can you talk to your HR/T&E functional consultant if they populate these values in CATSDB table using standard way or if there are custom fields that are in CATSDB OR any other table which can be used to meed the requirements
    Thanks
    Abhishek Shanbhigue

  • Batch no. as Valuation type at the time of GR

    Hi Friends,
    When we are doing GR how to bring Valuation type as batch no. Batch no. will be automatic sequential no.
    We activated Split valuation & Batch management.
    Shall I know where I need to do customization for this ?
    Regards,
    Sai Krishna

    Hi All,
    Thanks for all inputs. I got the answer.
    As I told already We did customization for getting continous sequential no. as batch when we are doing GR.
    We want to have this batch no. to be automatically entered as valuation type at the time of GR.
    This can be done in the following way:
    1.Go to OMWC Split valuation customization.
    2. While defining Valuation category , pls. select cehck box of "Determine val. type automat."
    3. Assign the same to the plant by clicking Click on local definition, select plant & click on (Cat. - OU)
    Regards,
    Sai Krishna

  • Default inspection Type In the Material Master

    Hello
    We have to assign two -three inspection types in the material master. How to default this inspection types in the material master always .
    Thanks
    JJ

    Dear JJ
    This you will have to do by putting validation in the material master. I dont think you have a standard solution for that.
    Or esle you can run QA08 wherein you can assign inspection type enmass.
    Please let meknow your feedback
    Regards
    Gajesh

  • How to delete inspection type assigned in material on mass level

    Hi Team,
    How to delete inspection type assigned in material on mass level. This inspection type is assigned in material master with indicator set as"Task List", however we are using "material specification". This inspection type is assigned to material type using t-code QA08.
    I can deactivate this inspection type using QA08, but I want to delete this record from material master first. So that it would adopt my config. next time when I will assign again insp.type in QA08. I have set this indicator in config. of insp. type as default to "material specification".
    Pls suggest me solution to delete this insp. type record from material master.
    Thanks

    hi
    if Material speciiication and task lists are checked -- then no need to do anything,
    but only task list checked and u want to do based on mat.spec -- then you need to deactivate and reassign same inspection type using QA08.
    no other way, ensure ur stocks are not in QI
    thanks
    Sami

  • How to over write VBBE data when Delivery is created if at the time of SO creation stock blocking is there

    Hi,
    I want to know how to over write VBBE data after delivery creation if stock blocking is there at the time of SO creation.
    That means I want my confirmed delivery quantity to over write the SO quantity in VBBE table after delivery creation. Please help me with your valuable suggestions...
    Thanks
    Tanmoy

    Hi Tanmoy,
    This should happen automatically. The VBBE entry should reflect the quantity of the delivery requirement. Is it possible for you to post screenshots illustrating exactly what is happening on your system?

  • How can add partner at the time of PO creation

    The requirement is to add an extra partner in the Purchase Order header Partner tab at the time of PO creation itself. The PO is being posted through Idoc. A custom function module has been maintained as inbound processing FM and it calls BAPI_PO_CREATE1 inside.Can anyone help me resolving the requirement?

    Using GOS ...

  • How to find most cost-effective fwdg agent at the time of shipment creation

    Dear Friends,
    I have a requirement of realizing the best cost effective transporter(forwarding agent) in the shipment document. Then how to do using the Transportation functionality of the ERP?
    There is a scenerio like I want to transport my goods from L to M. In system say i have a route XX for that, which gets automatically determined in the shipment document.
    Now on route XX, if i have 5 operative transportors, say A, B, C, D, E.
    Transporter A - provides services km-wise, kg-wise, fixed price as well as truck wise
    (Say if you opt for km-wise, charges are 15 rs/km, 10 rs/kg, fixed price of 15000 for full truck from A to B)
    Transporter B - Similar to Transporter A with different charges
    (Say if you opt for km-wise, charges are 18 rs/km, 7 rs/kg, fixed price of 14500 for full truck from A to B)
    Similarly other tranporters also have their charges.
    and Now at the time of shipment creation, how can i have some standard method, so that the system suggest the most cost effective transportor for my delivery ie. shipment i want to make or probabaly if there is some standard way to get the list of all available transporters on a given route at the time of shipement creation.
    Please suggest.
    Regards,
    Dipti.

    Hi Sandeepan,
    Thanx for ur reply.
    As per my requirement, there might be say 100 routes existing into the system and each route might have say 10 different transportors available. Now they want to know 1) the list of transportors available on the given route - (run time at the time of shipment creation) to be put into the forwarding agent field 2) Of the available (say 10 transportors) who will be the best/cheapest.
    As per your suggestion, the functionality helps after we put in the fwdg agent and then estimate his associated cost. But as in this case, since there are so many routes (associated so many transportors) they will not know whom to put in the field.
    Hence want to know if there is some standard functionality of SAP which might help us i) identifying the list of transportors on a particular route or a given criteria - run-time ii) How to find the best among available OR i) SAP Directly suggesting the one and best transportor available on a given route.
    Please help.
    Regards,
    Dipti.

  • Photoshop CS6 crashes all the time and especially when using the type tool... please help!

    Photoshop CS6 crashes all the time and especially when using the type tool... please help!

    Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
    ATI Radeon HD 4850:
      Chipset Model:          ATI Radeon HD 4850
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x16
      VRAM (Total):          512 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x944a
      Revision ID:          0x0000
      ROM Revision:          113-B9110C-425
      EFI Driver Version:          01.00.383
      Displays:
    iMac:
      Resolution:          2560 x 1440
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
      Connection Type:          DisplayPort
    Cinema HD:
      Resolution:          1920 x 1200
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          2A80273WXMN
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported

  • How to maintain Document Type as Default in FB60

    Hi Gurus,
    How to maintain Document Types.
    I have a requirement in Transaction FB60 that Document Type should be Vendor Invoice as Defualt whenever i open this T.Code. (Now Cash Book - HO, coming as defualt in FB60).
    So please tell me from where i can make it as defualt Vendor Invoice...
    Is there any Trasaction for do this...
    Please tell me...
    Thanks & Regards...

    Solved Myself..
    Through SHD0 - Create Transaction Variant..

Maybe you are looking for