How to modify the code to get started the timer on mentioned time?
Hi,
I have the following code from a source. I would like to make a few changes as mentioned below:
First ....
1) The as3 code should get the time form "startMeeting_txt.text"
2) Compare it with current time from "currentTime_txt.text"
3) The Timer should be activated as soon as the "startMeeting_txt.text" = "currentTime_txt.text" and starts counting
4) When the "finishMeeting_txt.text" = "currentTime_txt.text" then
5) "message_txt.text" = "Meeting time is over"
How to modify the following code:
var count:Number = 60;
var myTimer:Timer = new Timer(1000,count);
myTimer.addEventListener(TimerEvent.TIMER, countdown);
myTimer.start();
function countdown(event:TimerEvent):void {
myText_txt.text = String((count)-myTimer.currentCount);
if(myText_txt.text == "0"){
gotoAndStop(2)
Thanks.
Thanks. I am at work now and don't have Flash installed on my PC. I will try it at home. I just found this code on a website and wanted to know it more without any try. I must try it first then seek help. I am sorry.
I do respect your advise.
Regards.
Similar Messages
-
How do you create the FPGA I/O Start Node shown in the NI 9233 Getting Started FPGA VI
The fourth frame of the sequence structure in the NI 9233 Getting Started (FPGA) VI (from examples, browse by task, Toolkits>>FPGA>>cRIO>>AI>>Modules>>9233) shows an FPGA I/O node with a Start Terminal. Can someone tell me how to generate the Start Terminal in an FPGA I/O Node?
The Start and Stop terminals of the 9233 module are handled the same as digital lines from DI and DO modules. To access them in the diagram you first need to add them as digital I/O channels in the project.
Once you have added the 9233 module to the project, select to add I/O channels to your project. Instead of adding analog channels, go to the Digital Line Output section (see attached image) and select the Start and Stop signals from the 9233.
Back in your diagram you can then add a FPGA I/O node and select these signals.
Message Edited by Christian L on 12-11-2006 04:41 PM
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense
Attachments:
9233iochannelconfig.JPG 38 KB -
Hello
can someone please tell me how to modify this code so that I dont have to enter the file path at all? When i give the same file path constants to both the read and write VIs I'm getting an error message.
Attachments:
read and write.vi 11 KBYup use the low level File I/O opening the reference once, and closing it once.
As for the path selection you have an unwired input which is the path to use. Programatically set that and you won't be prompted to select a path. Usually this is done with a path constant to a folder, then using the Build Path, to set the file name in that folder.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously. -
I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?
Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave -
I downloaded the trial and can't find it. How do I download pictures and get started.
I downloaded the trial and can't find it. How do I download pictures and get started.
What can't you find, the downloaded installer, or the installed program?
What pictures you want to download?
What is your operating system? -
How to modify this query to get the desired output format
I hv written a Query to display all the parent table names and their primary key columns(relevant to this foreign key of the child table).The query is given below...
SELECT DISTINCT(TABLE_NAME) AS PARENT_TABLE,COLUMN_NAME AS PARENT_COLUMN
FROM ALL_CONS_COLUMNS
WHERE CONSTRAINT_NAME IN (SELECT AC.R_CONSTRAINT_NAME
FROM ALL_CONSTRAINTS AC
WHERE AC.TABLE_NAME=TABLE_NAME
AND AC.TABLE_NAME='&TABLE'
AND AC.R_CONSTRAINT_NAME IS NOT NULL);
This query will display all the parent tables and their primary key columns.Now my problem is that how to modify this query to also display the foreign key column name of the child table.
I want the query result in the following format.The query should display the following columns.1)child table's name,2)child table's foreign key column name,3)the corresponding parent table's name,4)the parent table's primary key column name(which is the foreign key in the child table).
For Example I want the output as follows...
TAKE THE CASE OF SCOTT.EMP(AS INPUT TO YOUR QUERY)
CHILD_TABLE CHILD_COLUMN PARENT_TABLE PARENT_COLUMN
EMP DEPTNO DEPT DEPTNO
In this result I hv used alias name for the columns.The query should display this only for the foreign keys in the child table.In the query which I sent to you earlier will give the parent table and the parent column names,But I also want to append the child table and child column names there.
any help on how to tackle would be appreciated.Try this query
SELECT c.table_name child_table,
c.column_name child_column,
p.table_name parent_table,
p.column_name parent_column
FROM user_constraints a,user_constraints b,user_cons_columns c,
user_cons_columns p
WHERE a.r_constraint_name=b.constraint_name and
a.constraint_name=c.constraint_name and
b.constraint_name=p.constraint_name and
c.position=p.position
ORDER BY c.constraint_name,c.position
Anwar -
How to add a code TestIfElse(10) to the Main method of the Program.cs class?
How to add a code TestIfElse(10) to the Main method of the Program.cs class?
Here is my code and I have copied from the Wiley book for Microsoft certification page 14,
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace ifelse_Statement
class Program
static void Main(string[] args);
TestIfElse(10);
public static void TestIfElse(int n);
if(n < 10)
Console.WriteLine("n is less than 10");
else if(n < 20)
Console.WriteLine("n is less than 20");
else if(n < 30)
Console. WriteLine("n is greater than or equal to 30");
Here is the error list I am getting,
Error 1 Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 13
switch_Statement
Error 2
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 24
switch_Statement
Error 3
Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 9
ifelse_Statement
Error 4
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 20
ifelse_Statement
Error 5
Invalid token 'if' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 9
ifelse_Statement
Error 6
Invalid token '10' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 7
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 8
Invalid token '(' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
18 35
ifelse_Statement
Error 9
A namespace cannot directly contain members such as fields or methods
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
20 10
ifelse_Statement
Error 10
Type or namespace definition, or end-of-file expected
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
30 1
ifelse_Statement
Error 11
The type or namespace name 'n' could not be found (are you missing a using directive or an assembly reference?)
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
16 12
ifelse_Statement
Error 12
'System.Console.WriteLine(string, params object[])' is a 'method' but is used like a 'type'
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
18 26
ifelse_Statementstatic void Main(string[] args){
TestIfElse(10);
public static void TestIfElse(int n)
if (n < 10)
Console.WriteLine("n is less than 10");
else if (n < 20)
Console.WriteLine("n is less than 20");
else if (n < 30)
Console.WriteLine("n is greater than or equal to 30");
Fouad Roumieh -
i put in the code to get the digital copy for star trek into darkness, and i clicked download later, but it didn't show up in my movie library like the other movies i did the same thing to, where is my digital copy of star trek?
Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants. -
How to deselect the text when I start the program?
how to deselect the text when I start the program?
photo:wants the blue background could not be seen:
Code Form:
Public Class Form2
Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If ComboBox1.SelectedItem = "The Sims 4" Then
Form3.Show()
Else
End If
If ComboBox1.SelectedItem = "The Sims 3" Then
Form4.Show()
Else
End If
End Sub
End Class
There's a lot wrong with all of that.
I'm sorry that I won't be able to help...
Still lost in code, just at a little higher level. -
What is the code to get the Label of radio button item at runtime?
Hi All
I am working on forms 10g(version 10.1.2.0.2 ) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on windows 2000 platform.
My requirement is to dynamically get the label of the radio button item in a radio group.I am able to get the label of the radio group as shown below
Item :Radio group
Label : Gender
IF m_type = 'RADIO GROUP' THEN
m_label:=Get_Item_Property(m_Item ,label);
END IF;
There two Radio buttons inside this radio group which are
item : Radio button
Label : Male
item :Radio button
Label :female
What is the code to get the label of radio button(i.e) male and female ?
How will I get the count of radio buttons in a radio group at runtime?
Regards
MohanBut you have to provide the button name which cannot be get at runtime.
This is a lack of information that the Dev team would correct !
Francois -
I "Reset Firefox – easily fix most problems", but it doesn't look like the view on getting started tutorial, ie: there's no "Firefox tab". I would really like to clean out all the old stuff, including add-ons and plug-ins that I've tinkered in, but don't know about or need any more, then start fresh with the latest Firefox. How can I do that?
The Firefox button does not or did not showupon Windows XP by default.
It is easy to display that just remove the option to display the menu bar toolbar. Note
# The functions and available optons are much the same just organised differenttly
# Menu tool bar may be displayed temporarily; even if the Firefox Button is present: by holding down the keyboard '''Alt''' key
#To remove the menu toolbar use '''View -> Toolbars -> []Menu Toolbar'''<br /> see [[Display the Firefox button menu instead of the menu toolbar]] -
Can't register and can't get rid of the "Let's get started" pop-up
I was trying to register my wife's iPad, using her iTunes account. It said that the ID didn't match the password no matter what I did, including resetting the password several times.
What is odd, is that we were able to download apps directly to the iPad by typing in the new password on the iPad. In other words, iTunes seems to recognize the iPad, the account and the password, but it keeps asking us to register the iPad each time we try and sync. So, it seems to be partially registered.
Any ideas? I would hate to have to reset everything and start from scratch. Not sure how to do that anyway.
thanks,
CliffThere's really no way of getting rid of the "Let's Get Started" screen. It's just a side effect of buying a used iPad from the Black Eyed Peas.
-
Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?
Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.
-
I have an iPhone 5S, with iOS 8.1.2 I am trying to do a system restore but the message I get on the desktop is that there is not enough room on the iPhone. How much room is required?
I had an important app. (Memos by bluemarblesoftware.com) that I accidentally deleted. It of course had many memos, some with quite a lot of information. I did sync my phone on a regular basis and I think the memos should be on the desktop computer. I tried to do a restore function but I got a message saying there was not enough room on the iPhone. How much room is needed?generally you need 1.90gb
what you can do is back up your phone to your computer before doing the update, just as a precaution. -
How to update Tr code FB02 and update the field reference key1 (bseg-xref
Can any body
help me how to update Tr code fb02
and update the field reference key1 (bseg-xref1) with the interest amount
calculated.
Below i have written My program flow logic
The program should read the open items i.e debit items in the customer account,
Based on the invoice date and customer payment terms calculate the due date and then the interest should be calculated on that item based on the due date.
Use the transaction fb02 and update the field reference key 1 (BSEG-xref1)
with the interest amount calculated
Only consider customers whose interest indicator knb1-vzskz = 'vk'.
Interest is to be calculated for every 30 days
at the rate of 1% .please see example below.
Document date is 01.01.2007
for amount 1000SGD payment term 7 days
It becomes due on 08.01.2007
until 06.02.2007 you should not consider for calculation of interest
SGD on 7.02.2007 run you can consider this item for interest calculationHi Robert,
Thanks for answering.
I am looking at Ref 2 should flow automatically to clearing document from the accounitng document for billing.
Ex: Billing document is created and accounted. Ref 2 is AB
Now when receipt is accounted for this biling document this AB should flow automatically to Ref 2 field.
Thanks
NNS.
Maybe you are looking for
-
Trying to clean up my iMac. Noticed that while in finder, I click on Applications and in the list I see another folder called applications that is a duplicator of the original folder. Is this truly a copy that can be deleted?
-
Exclusion item condition value for header condition
Dear All, I explained my problem with example scenerio. Sales Order Total Net Amount = 1.500 EUR SO Item-10 = Advance Payment Sales = 500 EUR >> for first invoice SO Item-20 = Sales from stock with HAWA material - 1 = 300 EUR >> for second invoice S
-
Process for bill of exchange receivables
Hello, I would like to understand the correct way of the process for the bill of exchange receivalbes. 1. Posting of bill of exchange t-code F-36 2. Maintain bill of exchange liability t-code F_72 3. Presentation to bank t-code FBWE Is this correct?
-
When I am in a Safari email and it has an attachment (WORD, EXCEL, PDF) and I click on the attachment to open it, it goes to download. How can I get the document to open directly into WORD, etc. I am able to do this when I use Chrome and email.
-
What procedure to call to reject the Import data load?
Hi All, When i am importing the data i have an after insert trigger which will validate the data going to be inserted.Now if the validation fails i need to reject the data load.Is there any way to do that means manually i want to throws or return som