How to monitor url?

Hi there,
How to monitor users url in a campus environment....? (about 200 users)
Is there any cisco devices are available to do this job...?
Thanks in advance....!!!!

Wrong forum.

Similar Messages

How to monitor sigtran links on a 7604 using mibs

I've been looking the manuals but I was not able to find how to monitor sigtran links using mibs on a 7604.
Some Cisco manuals points to URLs that doesn't exist. I would like also to know how to create traps about theses mibs.

Simply do your integration as instructed by the guides, make sure all user/device/line associations are in place, add someone who doesn't have Jabber to your contact list, he will always show offline and will only show as on a call when he pickups the handset.
EDIT: this will also happen for people who DO use Jabber, but do not log in.

How to monitor a specific transaction in Solution Manager ?

Hi all,
I have configured the Service Level Reporting and it works correctly.
But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
Have i to configure the Business Process Monitoring ?
Thanks.

Hello,
it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
Best Regards
Volker

How to monitor an application using JMX

Hi,
How can I monitor the portal application running on portal server by using MBeans (JMX)? For this I need to make a connection between my portal application and MBean class, How to monitor operations? How can I do that? If anybody has come across the same requirement pls explain me with the implementation details.

Hello,
I have done that in a project (not Portal, but pure Java Application, should be no difference), working fine.
The steps are as follows:
- create MBean Server (e.g. MBeanServerFactory.createMBeanServer("test");)
- create your MBeans
- make them accessible to clients (register the MBeans in the server)
- query them from clients
see http://java.sun.com/developer/technicalArticles/J2SE/jmx.html
for very good explanation including sample source code.
CSY

How to monitor OSD TS failure and get alert or report?

How to monitor OSD TS failure and get some alert or generate an report?
We have SCCM 2012 R2 CU1 with MDT 2013.
I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
(I thinking of "Task Sequence - Deployment Status" reports)
I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
We do have SCOM, SCSM, SCO.
Is there anyone that can point what way or what option I have?
/SaiTech

Specifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
Cheers
Damon

How to delete URL Maintenance in peoplesoft

how to delete URL Maintenance in peoplesoft , Please any one suggest to me how to delete identifier.
Navigation : Main menu -->Peopletools --> Utilities --> Administration --> URL
in this url page have URL maintenance.I added one identifier .
URL Identifier:
*Description:
*URL:
Comments:
Regards,
lokeswar

Main Menu>PeopleTools>Portal>Structure and Content>Traverse to the URL by clicking on the links(Peopletools --> Utilities --> Administration --> URL)>Click on Edit Link
Check the box for "Hide...."

How to monitor disk space in BW

can some body help me out on the following issues.
1)How to monitor disk space in BW?
2)How can I delete Application logs in BW?

When I research with DB02 transaction code in BW, I encountered following tables having lot of log , please some body can help me, how to delete the following log data?
ARFCSDATA     ARFC Call Data (Callers)
BALDAT          Application Log: Log data
BSRWBSTORE     Storage for binary large objects (Excel)

How many monitors can you use on a new imac with GEForce 780m?

My husband bought a new 27" iMac with the optional GEForce 780m with 4 gig of video ram. He wants to know how many monitors he can run simultaneously, and at what resolutions. He would obviously be using the Thunderbolt ports to do this. I thought this information should be easily found in the technical specs for either the iMac or the video card itself on the NVidia site, but it is not.

Catherine Gramze wrote:
Ok, rkaufman. Can he use two 4k monitors in addition to his iMac display? He wants to know what his options are in terms of number of monitors and the resolution. Yes, I know which monitor you buy will be the limiting factor for the actual display, but he has not yet purchased these additional monitors. If thunderbolt allows him to run 3840x2160, how many of them can he run at once at 32 bpp? How many if he chooses 2560x1600 instead?
To be honest I don't know how many Thunderbolt displays he can run, I would STRONGLY recommend contacting Apple to ask. You can ask the online store (phone number is in upper right of it's home page) or if you have an Apple Store in your area, making an appointment with a business specialist and asking that question.

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

How to monitor oracle 11g database sessions on Windows 2008 server?

Hi Experts
How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.

Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence. i never tested it but seems impresive. It is free and i think it would be use ful to you.
http://myorasql.com/
You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured .

How does the URL of DataSocket constitute?And how to use it in LabWindows/CVI ?

Hi ！
There's a problem puzzled me some days.How does the URL of DataSocket constitute ? And how to use it in LabWindow/CVI ?
For example.I have downloaded a code in http://zone.ni.com/devzone/cda/epd/p/id/3787.I want to make it work properly.So I configure my DataSocket Server Manger according to the URL of this statement.
DS_Open ("dstp://weather.natinst.com/weather/current",
DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
&dsCurrentHandle);
My DateSockket Server Manger is configured as:
However,it could not work properly when I debug it.
There's a introduction at the top of the code."You may need to replace the references to weather.natinst.com to 130.164.140.10 if the DNS isn't working properly."So,I modified the statement into
DS_Open ("dstp://130.164.140.10/weather/current",
DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
&dsCurrentHandle);
but,it did work properly.
We want to communicate with other computers via the URL of DataSocket in LabWindows/CVI.Whereas,how could we make it ia the URL ?
If anyone could help me solve this problem,I would appreciate it very much !
Best regards.
xiepei
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

Hi !
Thank you very much for your reply! I will accept your advice.
Besides,I have another question.If I want to visit other computers or other websites，how does the URL of DataSocket I constitute ? Does the URL has any relation with the DataSocket Server Manger ？If does,how to configure the DataSocket Server Manager to let them connected.If they have no relation,how to use the DataSocket Server Manger ?
After all,I want to know how to use it in LabWinows/CVI ？
Thank you very much !
Best regards!
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

How to monitor partial payment

Dear All:
In my case, I always pay more money for original AR because I forgot partial payment had been done before. How I monitor AR overpayment when past partial payment exist?
Thanks for the help suggestion first. Sorry for error description above.
1.first for specific overdue analysis policy of company, we use partial payment.
2.And then the question comes. According to contract item, we send invoice to customer only once and receive payment in several step. Each time income received, we use partial payment to clear the AR (to relate payment with original AR). But one customer may have some contracts with us, it always pay for all contract in certain amount at one time. We shall manually divide amount for each contract. If user forgot one contract was paid partially before, he may clear the AR totally at sencond time and then the first payment will still outstanding in open item. Finally we can find many partial payments received but can't refered to any invoice.
So we are finding a way to control AR clearing to check whether partial payment exist and if the total amount is over original invoice it couldn't be cleared.
Thanks to give me some suggestion.
Message was edited by:
        Tommy shi
Message was edited by:
        Tommy shi
Message was edited by:
        Tommy shi

Hi...
You always have the otion of displaying vendor/customer balances(FK10N/FD10N) to find out the balances and the vendor/customer line items(FBL1n/FBL5N)
When you pay your vendors select residual payment so that the system will select the residual item remaining to be paid to avoid any confusion.
Its a good business procedure that you should not be paying your vendors more unnecessarily.
Regards
Aravind
Assign points if useful

How to specify URL in server.xml of Tomcat

Hi Everybody,
I need help.How to specify url in the server.xml.
I developed one application in the Tomcat 3.3.I want to access the by entering uri(like:http:test.com).
What are tags to enter in the server.xml.
Right now i am accessing like:http://localhost:8080/Test/Login.jsp
I want replace this with (www.test.com).
This site will access from anywhere means it is going to live.
So what are things have to do in the server.xml
Please provide the solution.
Regards
Sridhar

Hi Raktim:
I looked around on SDN and it seems that i have found what you have been looking for.
Kindly look at page number 24 and 25 of this page
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4d46fb8a-0b01-0010-9fbe-e4b96533b222
P.S: Kindly assign points if your query is resolved, also close the question to assist other users narrow the search and find solutions

How to monitor MySQL Server installed in Windows Server using Nagios

You can do this via NSClient as Gary posted. The NSClient is a communications system that allows nagios to send commands to a target system over the nsclient protocol and they are executed on the remote system. You will still have to build some kind of vbscript or plugin to run on the target system to do the actual query to check on mysql.There are other options to. If you enable snmp on your target computer you can use a few nagios plugins to query the snmp agent on the target computer to see if a service is running. To do this via snmp you will need this plugin "check_snmp_process.pl" fromthis site.Your check command will look something like this:check_win_process:= check_snmp_process.pl -H $HOSTADDRESS$ -C "$USER6$" -n "$ARG1$" -w $ARG2$ -c $ARG3$The service definition will be like this:check_win_process!sqlservr!0!0This will check...

I installed Nagios Core in my Ubuntu workstation 10.04 for me to learn something new in my craft. I use this now to monitor our Windows Server 2008 with MySQL server installed as well as our Datalink Switch (DGS-1210-24). I searched on google on how to monitor a MYSQL server installed in Windows server using Nagios Core but i could not seem to find any. Could anybody who's expert in Nagios give me steps on how to do so. Thanks. All i found in google were steps in monitoring mysql installed in linux and nothing in windows server.
This topic first appeared in the Spiceworks Community

How to call url from abap in background

Hi,
I could open url but it opens browser window
i saw several threads on how to cal url in background but no good answer
kindly help
thanks
B

Hi,
Try the following (primitive) example, it calls an url and display the result on screen.
Hope this will help you.
<pre>
REPORT test.
 CLASS lcx_http_client DEFINITION
 Minimal Error Handling
CLASS lcx_http_client DEFINITION INHERITING FROM cx_static_check.
PUBLIC SECTION.
 INTERFACES:
 if_t100_message.
 DATA:
 mv_method TYPE string, "#EC NEEDED
 mv_subrc TYPE i. "#EC NEEDED
 METHODS:
 constructor
 IMPORTING iv_method TYPE string OPTIONAL
 iv_subrc TYPE i OPTIONAL
 iv_msgid TYPE symsgid DEFAULT '00'
 iv_msgno TYPE i DEFAULT 162.
ENDCLASS. "lcx_http_client DEFINITION
 CLASS lcx_http_client IMPLEMENTATION
CLASS lcx_http_client IMPLEMENTATION.
METHOD constructor.
 super->constructor( ).
 mv_method = iv_method.
 mv_subrc = iv_subrc.
 if_t100_message~t100key-msgid = iv_msgid.
 if_t100_message~t100key-msgno = iv_msgno.
 if_t100_message~t100key-attr1 = 'MV_METHOD'.
 if_t100_message~t100key-attr2 = 'MV_SUBRC'.
ENDMETHOD. "constructor
ENDCLASS. "lcx_http_client IMPLEMENTATION
 CLASS lcl_http_client DEFINITION
 Facade for if_http_client
CLASS lcl_http_client DEFINITION.
PUBLIC SECTION.
 CLASS-METHODS:
 get_http_client_by_url
 IMPORTING iv_url TYPE string
 iv_proxy_host TYPE string OPTIONAL
 iv_proxy_service TYPE string OPTIONAL
 PREFERRED PARAMETER iv_url
 RETURNING value(ro_http_client) TYPE REF TO lcl_http_client
 RAISING lcx_http_client.
 DATA:
 mr_http_client TYPE REF TO if_http_client.
 METHODS:
 send
 RAISING lcx_http_client,
 receive
 RAISING lcx_http_client,
 close
 RAISING lcx_http_client,
 get_response_header_fields
 RETURNING value(rt_fields) TYPE tihttpnvp,
 get_response_cdata
 RETURNING value(rv_data) TYPE string.
ENDCLASS. "lcl_http_client DEFINITION
 CLASS lcl_http_client IMPLEMENTATION
CLASS lcl_http_client IMPLEMENTATION.
METHOD get_http_client_by_url.
 DATA: lv_subrc TYPE sysubrc.
 CREATE OBJECT ro_http_client.
 cl_http_client=>create_by_url( EXPORTING url = iv_url
 proxy_host = iv_proxy_host
 proxy_service = iv_proxy_service
 IMPORTING client = ro_http_client->mr_http_client
 EXCEPTIONS argument_not_found = 1
 plugin_not_active = 2
 internal_error = 3
 OTHERS = 999 ).
 CHECK sy-subrc <> 0.
 lv_subrc = sy-subrc.
 RAISE EXCEPTION TYPE lcx_http_client EXPORTING iv_method = 'GET_HTTP_CLIENT_BY_URL' iv_subrc = lv_subrc.
ENDMETHOD. "get_http_client_by_url
METHOD send.
 DATA: lv_subrc TYPE sysubrc.
 mr_http_client->send( EXCEPTIONS http_communication_failure = 5
 http_invalid_state = 6
 http_processing_failed = 7
 http_invalid_timeout = 8
 OTHERS = 999 ).
 CHECK sy-subrc <> 0.
 lv_subrc = sy-subrc.
 RAISE EXCEPTION TYPE lcx_http_client EXPORTING iv_method = 'SEND' iv_subrc = lv_subrc.
ENDMETHOD. "send
METHOD close.
 DATA: lv_subrc TYPE sysubrc.
 CALL METHOD mr_http_client->close
 EXCEPTIONS
 http_invalid_state = 10
 OTHERS = 999.
 CHECK sy-subrc <> 0.
 lv_subrc = sy-subrc.
 RAISE EXCEPTION TYPE lcx_http_client EXPORTING iv_method = 'CLOSE' iv_subrc = lv_subrc.
ENDMETHOD. "close
METHOD receive.
 DATA: lv_subrc TYPE sysubrc.
 mr_http_client->receive( EXCEPTIONS http_communication_failure = 9
 http_invalid_state = 10
 http_processing_failed = 11
 OTHERS = 999 ).
 CHECK sy-subrc <> 0.
 lv_subrc = sy-subrc.
 RAISE EXCEPTION TYPE lcx_http_client EXPORTING iv_method = 'RECEIVE' iv_subrc = lv_subrc.
ENDMETHOD. "receive
METHOD get_response_header_fields.
 mr_http_client->response->get_header_fields( CHANGING fields = rt_fields ).
ENDMETHOD. "get_response_header_fields
METHOD get_response_cdata.
 rv_data = mr_http_client->response->get_cdata( ).
ENDMETHOD. "get_response_cdata
ENDCLASS. "lcl_http_client IMPLEMENTATION
PARAMETERS: p_url TYPE string DEFAULT 'http://www.google.com' LOWER CASE,
 p_phost TYPE string DEFAULT 'your_proxy_here' LOWER CASE,
 p_pserv TYPE string DEFAULT '8080' LOWER CASE.
*===================================================================================
START-OF-SELECTION.
TRY .
 DATA: gt_data TYPE string_table,
 gv_data TYPE string,
 gr_http_client TYPE REF TO lcl_http_client,
 go_cx TYPE REF TO lcx_http_client.
 "Initialize the http client
 gr_http_client =
 lcl_http_client=>get_http_client_by_url( iv_url = p_url
 iv_proxy_host = p_phost
 iv_proxy_service = p_pserv ).
 "Call the specified URL and retrieve data from the response
 gr_http_client->send( ).
 gr_http_client->receive( ).
 gv_data = gr_http_client->get_response_cdata( ).
 "Its over....
 gr_http_client->close( ).
 "Display result
 REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>cr_lf IN gv_data WITH cl_abap_char_utilities=>newline.
 SPLIT gv_data AT cl_abap_char_utilities=>newline INTO TABLE gt_data.
 LOOP AT gt_data INTO gv_data.
 WRITE: / gv_data.
 ENDLOOP.
 CATCH lcx_http_client INTO go_cx.
 MESSAGE go_cx TYPE 'S' DISPLAY LIKE 'E'.
ENDTRY.
</pre>

How to monitor url?

Similar Messages

Maybe you are looking for