How to pass parameter form one report to another and run it. No web page

Using Crystal Reports XI, Win XP pro SP2. I have main report I want to set a field as a hyperlink when user clicks on it I want to pass the value of that filed as an input to another report and run it . Note that this is not a Web page (no HTTP://). It is not what is described on article 1212 849.

You can remove the field value and right click on the on demand subreport and go to format subreport and in sureport tab-->use on demand subreport caption X+2 and place the field value in it.
Regards,
Raghavendra

Similar Messages

OBIEE 11g How to pass variable from one prompt to another prompt in dashboard page.

How to pass variable from one prompt to another prompt in dashboard page.
I have two prompt in dashboard page as below.
Reporttype
prompt: values(Accounting, Operational) Note: values stored as
presentation variable and they are not coming from table.
Date prompt values (Account_date, Operation_date)
Note:values are coming from dim_date table.
Now the task is When user select First
Prompt value “Accounting” Then in the
second prompt should display only Accounting_dates , if user select “operational”
and it should display only operation_dates in second prompt.
In order to solve this issue I made the
first prompt “Reporttype” values(Accounting, Operational) as presentation
values (custom specific values) and default presentation value is accounting.
In second prompt Date are coming from
dim_date table and I selected Sql results as shown below.
SELECT case when '@{Reporttype}'='Accounting'
then "Dates (Receipts)"."Acct Year"
else "Dates (Receipts)"."Ops
Year" End FROM "Receipts"
Issue: Presentation variable value is not
changing in sql when user select “operation” and second prompt always shows
acct year in second prompt.
For testing pupose I kept this presentation
variable in text object of dashboard and values are changing there, but not in
second prompt sql.
Please suggest the solution.

You will want to use the MoveClipLoader class (using its loadClip() and addListener() methods) rather than loadMovie so that you can wait for the file to load before you try to access anything in it. You can create an empty movieclip to load the swf into, and in that way the loaded file can be targeted using the empty movieclip instance name.

Not able to pass parameter from one fragment to another fragment in another taskFlow

Hi,
I'm trying to pass parameter from one fragment to another fragment and want to print the parameter value in second fragment.
i have inputtext in first frag---
first fragment belongs to one taskflow1 and this taskflow1 i had darg and drop to one mainPage.
Under taskflow1 itself i drag and drop one taskflow call activity and on top of that i drag and drop another bounded taskflow as taskflow2
under taskflow2 i have one fragment as fragment2and in that i have one outputtext field, now here i want to print the value from fragment1--inputtextfield value
to achive this i had tried many ways but somewhere doing mistake please explain step by step.
Thanks
Mahesh

In addition you need to tell us your jdev version!
Can you elaborate on your use case a be more?
On which event this should happen?
In general contextual events should allow you to implement this, however, as I don't understand the use case, I find it hard to help.
Timo

I will type in google let say tree the search will click on to one of the searches and instead of tree web page showing up a ad page will come up this happens with very thing can you help.

I will type in google let say tree the search will click on to one of the searches and instead of tree web page showing up a ad page will come up this happens with very thing can you help.

You (or your kids) inadvertently installed adware. You do not need to download or install anything to fix it.
Any tips on how to stop it from happening?
Yes. To learn how to avoid it in the future read How to install adware.
If you require them, Apple's removal instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

How 2 Cre8 Parameter Form 4 Report Running?

Hi All!
I don't know how 2 cre8 parameter form in form developer 10g but i tried this please check it out and guide me.
1)i have create a simple tabular report "rpt_dept.rdf" in report developer 10g.
The query is
SELECT DEPTNO,DNAME,LOC FROM DEPT
WHERE DEPTNO= :P_DEPTNO
2)Then i create a form in form developer 10g frm_dept
in this form i have create a DEPT data block in which i have only take a one field "deptno" and
one push button
3)in Reports node i have create reports object "Report10" using 'Use Existing Report File" option, by clicking the browse and navigate to "rpt_dept.rdf"
"Report10" properties
name=report10
File name=D:\GTMS_FILES\GTMS_APPLICATIONS\Reports\rpt_dept.rdf
execution mode=batch
communication mode= synchronous
data source data block=DEPT
report destinaton type=file
4) Then in when_button_pressed Trigger in put this code
Declare
     report_id Report_Object;
     ReportServerJob VARCHAR2(100);
BEGIN
     report_id:= find_report_object('REPORT10');
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'rep_uoas');
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'P_DEPTNO='||:Dept.Deptno||' paramform=no');
     ReportServerJob:=run_report_object(report_id);
END;
Now when i run this form and enter the deptno 10,20 or 30 and press the button it gives nothing and no report is shown
Note! "rep_uoas" is report server..
Please guide..
Please give me solution what mistake i have made
Thanks
Rana

You have to modify your code - machine_name is the name of your computer - this will run on your PC:
Declare
report_id Report_Object;
ReportServerJob VARCHAR2(100);
rep_status VARCHAR2(200);
L_REPORT_SERVER_PATH VARCHAR2(30):='http://machine_name:8889/reports';
L_REPORT_SERVER VARCHAR2(15):='rep_uoas';
BEGIN
report_id:= find_report_object('REPORT10');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,L_REPORT_SERVER);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'P_DEPTNO='||:Dept.Deptno||' paramform=no');
ReportServerJob:=run_report_object(report_id);
rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(ReportServerJob);
END LOOP;
IF rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT(L_REPORT_SERVER_PATH||'/rwservlet/getjobid'||substr(ReportServerJob,instr(ReportServerJob,'_',-1)+1)||'?'||'server='||L_REPORT_SERVER,'_blank');
ELSE
message('Error');
END IF;
END;
Before first running the report you have to start report server on your PC.

Passing parameter from one LOV to another

How can I pass a parameter from one LOV to another so I can restrict the number of recoder of the lower LOV based on what the user have selected in the upper LOV..This is being constructed on the customized page of a report.
Thanks..

If your using release 2, you may have a problem.
A combobox LOV can be used to link 2 LOV's but, the form they are on can't do a query, it fails to return any records. See bug 2141909.
A popup LOV can be used to do a query, BUT, there is a bug when you try to link 2 LOV's. See bug 2505560.
They are trying to do a backport, so submit a tar about it.
Larry

How to pass parameter from one form to another

Hi,
I have created a form based on a procedure . Now i want to pass a filed value from this form to another form . How can i do this.
How can i pass a vlue from one form to another form in oracle portal.
Thanks

At last - I've managed to get this to work! Is this documented anywhere at all - I just guessed it based on other people's code!
OK, to prove the example here is what I did:
I have a form referencing the DEPT table.
I created a item called 'Search' and of type button.
I created a 'custom' PL/SQL block and added the following code:
declare
v_deptno NUMBER;
begin
v_deptno := p_session.get_value_as_NUMBER(
p_block_name=> 'DEFAULT',
p_attribute_name => 'A_DEPTNO');
PORTAL30.wwa_app_module.set_target('http://server/pls/portal30/app_schema_name.EXAMPLE_SQL_REPORT.show?p_arg_names=_show_header&p_arg_values=YES&p_arg_names=_max_rows&p_arg_values= 25&p_arg_names=_portal_max_rows&p_arg_values=25&p_arg_names=DEPTNO&p_arg_values='| |LTRIM(TO_CHAR(v_deptno)),'CALL');
end;
Note: you need to reference the column with an 'A_' prefixing the columm name.
I left the name 'DEFAULT' as it is.
OK so I set this to a variable and now want to call a Report called EXAMPLE_SQL_REPORT which was created with the following code:
select * from scott.emp where deptno = :deptno;
The bind variable being the custom parameter for the report.
I called the new report with the PORTAL30.wwa_app_module.set_target procedure and put in the full URL path (in this example) of the server and report.
I hope this helps!
John
null

How to pass parameter from xcelsius report to WebI report

Hi,
I have a pie chart in xcelsius. When user clicks on one of the slices of the chart I want to pass the selected slice value to a WebI report.
For this I am doing following steps
1. When user clicks on a chart slice the selected slice value will be written into a cell say B1
2. Create a URL button which will get triggered on change of the value of cell B1.
3. Set the URL value in the cell say C2. Here I am using Opendoc function to open Webi report.
If I enter following value in C2 and run the report it works fine and opens the desired webi report.
="http://myServer.xyz.com:9001/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sType=wid&sDocName=MyDoc&sReportName=MyReport&sWindow=Same&sRefresh=Y&lsSCompany=MyCompany&lsSDecision=" &$B$1
here I am Passing two parameters Company and Decision.
Now I want to make this report run in all the environment so I changed the actual path of server( myServer.xyz.com:9001) to following
="../../opendoc/openDocument.jsp?sType=wid&sDocName=MyDoc&sReportName=MyReport&sWindow=Same&sRefresh=Y&lsSCompany=MyCompany&lsSDecision=" &$B$1
but if I do this it gives me following error in Webi:
"Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address."
Is there any other way to open the WebI report from xcelsius?

Hi Peter,
the link provided refers to Xcelsius V4.5.
In Xcelsius 2008 you have to control Flash Vars in the Data Manager.
Go to the Data Manager, Add the Flash-Var Connection Type, Select CSV-FlashVar and define a name and a range.
But i am not sure if Xcelsius Engage can handle FlashVars, because i am only working with Enterprise.
Please take a look at your manual.
For sure there are other ways to import data during runtime. Take a Look at the Connections provided by Data Manager. (e.g. QaaWS, SSRS, LiveOffice, Webservices, ...)
Also take a look at the link below. It might be another nice option for "pseudo" data connectivity
http://labs.businessobjects.com/xcelsiuspublishing/default.asp
Best Regards
Ulrich

How to pass parameter to a report for Operator 'LIKE'

I need to pass a parameter to a report for "LIKE" operator. the parameter for "equal to or is in" operator is 'eq':
'https://secure-ausomxfts.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=/shared/Company_AFTA-D78SR_Shared_Folder/Work Order Asset Lookup&Options=r&Action=Navigate&P0=2&P1=eq&P2=Account.TEXT_61&P3=&p4=
What would 'p1' value for 'LIKE' operator?
Thanks

Hi, Hope the below helps
neq - Not equal to or not in
lt - Less than
gt - Greater than
ge - Greater than or equal to
le - Less than or equal to
bwith - Begins with
ewith - Ends with
cany - Contains any (of the values in &P3)
call - Contains all (of the values in &P3)
like - Is like (Type %25 rather than the % wildcard)
top - In the top n (&P3 contains 1+n, where n is the number of top items)
bottom - In the bottom n (&P3 contains 1+n, where n is the number of bottom
items)
bet - Between (&P3 must have two values)
null - Is null (&P3 must be 0 or omitted)
nnul - Is not null (&P3 must be 0 or omitted)
Venky CRMIT

How to pass the value one portlet to another portlet

I have one page they are two portlet one portlet html portlet, another one form portlet. i want html portlet value pass to form portlet , is possible pls replay me

in the tag ACTION of the HTML portlet, or in a HREF tag inside, you just have to put the URL of the same page, but with adding the parameter. (this step in manual because it's a html portlet).
Then, you declare the parameter at the page definition level (as documented), and finally, you map the page parameter to input parameter of the form portlet. I Hope that Form portlet accepts input parameters. You better Check before.
Other technique: Use the companion portlet of omniportlet which builds a parameter form. It's suitable for entering value that are propagated to others portlets in a page. And the call back URL is build automatically.
Patrick.

How to pass information from one JSP to another JSP? help please

hi there
my question is how to pass some information such from one JSP to another one. for exmple, on one page there is a form, and i need to pass some values from the form to another jsp, or some values that were calculated on one JSP and need to be passed to another one. thanks

You can do this in several ways...here is a simple one...
When you call the second page url, use this
http://www.mysite.com?myVariableFromPageOne="hello"
on the second page use this:
String firstPageVariable = request.getParameter("myVariableFromPageOne");
Thanks

How to pass values from one section to another section in same dashboard..

hi
I am in need of designing a dashboard which contains 2 sections.In first section i will include a Dashboard prompt and in the second section, I have to display a jsp page by passing the result of prompt as a parameter.
how to pass these values.....
if possible send me some links regarding this
thanks in advance...............

Check my blog entry here http://oraclebizint.wordpress.com/2007/12/26/oracle-bi-ee-101332-drills-across-sections-in-a-dashboard/. It has an example.
Thanks,
Venkat
http://oraclebizint.wordpress.com

How to pass data from one component to another

Hi all,
We have added a button on "ICCMP_BTSHEAD" component, which will open a new popup component (Zcomponent), which will have some fields related to the order. Can anyone please tell us how to pass the ticket/ entity value to the new component so that it can be used there. Any pointers will be highly appreciated. Thanks.
Rgda,
@run

Hi Arun,
I have the same issue. I added the Follow-up(hyperlink) button in the Sales order. How can i get the view from the Interaction record follow-up by clicking on hyperlink in Sales order. Please help me.
Regards,
Swaraj

How to pass value from one method to another method

Hi all,
I have created a funtion module and i am calling this function module inside a method and it is exporting some value in a table, now i have to pass table value to another method where i have do some thing based upon this values.
I think there a marco available to move the values from one method to another method.
Please help me in this issue.
Regards
Balaji E.

Hi,
Let me make certain assumptions!
Method 1 - You export the table values
Method 2 - The method where you need the table values
Once you create a method from a function module which has tables as one of the export parameters then the code automatically puts in the macro code which looks like : SWC_SET_TABLE CONTAINER 'Table' TABLE.
The 'Table' in the above code is the container element which is created by the workflow once you use this method and the TABLE (The table that gets filled in the function module) is the variable to code automatically created.
Now you can use the other function module in the workflow as a background step and pass the values from the 'Table' container to this method using the binding. When you use this then the method automatically has the macro SWC_GET_TABLE CONTAINER 'Table' ITABLE. Here the 'Table' is the same container table you used in the binding and the ITABLE would be the variable you can use in the other function module.
Hope this helps,
Sudhi

Forms Personalization - How to pass parameter to a Report

Hi All,
I am trying to run a report from a menu entry in the AP Invoice entry form. For this I have done the necessary steps of creating the menu entry and am assigning the values for the 2 parameters to a global variable and then launching SRS form.
In SRS form created an action to assign the global variable value to work_order.parameters. I can invoke the SRS OK except that my 2 parameter values appear concatenated in the first parameter itself and are not getting assigned to each of them seperately.
my global variable assignment is as follows :
=${item.inv_sum_folder.vendor_name.value}||'.'||${item.inv_sum_folder.vendor_site_code.value}
and my work_order.parameters value assignment is as follows :
=select nvl(${global.kmg_invalid_po_gv.value}, ${item.work_order.parameters.value}) from dual
Any ideas why this is not working ?
Thanks in advance.
Shankar

Hi Prudhvi,
Thanks for reply.
I have actually seen it work for another report 'Supplier Payment Listing' (there are a few ppt presentations of this on the internet, can dig it out if reqd)
The Select of the Single Query is assigned using INTO to the output variables. Just as you can use these output variables anywhere in the message you can also use them as parameters to pass to a concurrent prorgam or a function.
However, when I try to mimick what i saw with above report for my custom report it somehow cannot distinguish between the parameters and treats them as 1 parameter value.
I believe the parameters need to be seperated by a period(.) when assigning to global variables.
Thanks
Shankar

How to pass parameter form one report to another and run it. No web page

Similar Messages

Maybe you are looking for