How to put bullet points in your form?

Where do I find bullet points/ numbers in Adobe Forms?

Hi,
Unfortunately, bullet point is not available in Adobe FormsCentral.
However, you may use the following html code to display the bullet point- •
Note:- Make sure the code is present in the exact pace of the bullet point, bullet will be only visible after the form is distributed or tested.
Regards,
Nakul

Similar Messages

How to put decimal points in your calculator for mac only on Xcode.

I need help. I created an app for calculating division, multiplication, addition & Subtraction. But everytime I divide 5 / 4, I get 1 without a remainder. The calculator app in OS X has a remainder when I calculated the division problem. I searched on the internet for help, but all of them are iOS tutorials. HELP!!!!!!

OK. But someday I'll be able to get these decimals in the calculator so that 5 divided 4 doesn't say 1, but says 1.1 (1.3 in the Calculator app in OS X.) Here's the code once again:
- (IBAction) getSum:(id)sender;
    int addend1, addend2, sum;
    addend1 = [mathField1 doubleValue];
    addend2 = [mathField2 doubleValue];
    sum = addend1 + addend2;
    [mathAns setDoubleValue:sum];
- (IBAction) getDiff:(id)sender;
    int minu, subtrah, diff;
    minu = [mathField1 doubleValue];
    subtrah = [mathField2 doubleValue];
    diff = minu - subtrah;
    [mathAns setDoubleValue:diff];
- (IBAction) getPro:(id)sender;
    int mulcand, mulpiler, pro;
    mulcand = [mathField1 doubleValue];
    mulpiler = [mathField2 doubleValue];
    pro = mulcand * mulpiler;
    [mathAns setDoubleValue:pro];
- (IBAction) getQuote:(id)sender;
    int numer, denom, quote;
    numer = [mathField1 doubleValue];
    denom = [mathField2 doubleValue];
    quote = numer / denom;
    [mathAns setDoubleValue:quote];
If this question has been answered, then I'll continue my Xcode development. If not, i'll have to throw my project in the trash. Leave me a suggestion.

How to adjust bullet points in Adobe Edge Animate?

How to adjust bullet points in Adobe Edge Animate?
when a bullet point is long and does not fit in one line it apears in the next line unaligned.

Hi Elaine,
Yes, the only way I have discovered so far is using HTML and force it on stage based on my text width size, otherwise bullet list won't be align vertically. This is how currently I do it:
sym.$("text1").html("<br>● Lorem ipsum dolor sit amet, consectetur adipisicing elit<br>   Lorem ipsum dolor sit amet, consectetur adipisicing elit <br>● Lorem ipsum dolor sit amet, consectetur adipisicing elit")
Thank you for your help in advance.
Sean

How to do bullet points?

Hi...i have read the keynote manual but i am not sure how to have bullet points in the middle of a slide as opposed to always being on the left hand side of the slide. Can anyone please help. I've tried inspector and the help guides but im not getting anywhere. If anyone could help i would be extremely grateful
Thanks
Rob

What you want to do is just make the edge of the text box be in the center of the slide. This will be easier if you turn on guides for the edges of objects - to go your preferences, rulers preferences, and check "show guides at object edges".
Now take your text box and just resize it so that the bullets are where you want them to be. You may need to set them to no indent (using the inspector) in order for the object edge guides to be helpful - when the edge of the object is in the middle of the slide, you should see a yellow vertical line that cuts through the entire slide to indicate this.

How to put borders in the tabular form report

Hi,
I need to put borders in the tabular form report in the apex UI .I mean in the by default no boundary comes so I need vertical lines in the column .
So how to do that.
Thanks in advance.
Edited by: Vivek on May 22, 2012 8:25 PM

Edit the report page > Report Attributes > Change the report template for different look and feel
You can also customize the report template or even create your own template
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/ui_templt.htm#HTMDB25707

How To Insert Bullet Points in LIVE in DW CC?

How do your insert bullet points (ordered or unordered) in LIVEVIEW without using divs or classes? (basic tags)
I am using DW CC 2014
Thanks

THANKS!
I spend about 10-15 minutes extra time fighting the UI of the LIVE VIEW.
I am all for the LIVE VIEW as long as it is just as quick to use as Design View when editing WYSIWYG content in Fluid Grid or not.
It's a good thing I can code
Thanks... I look forward to any improvments

How to create bullet points in BoilerPlate 'Text' item...

Hi,
I have a requirement of generating a form. In that form there is a static section which contains bullet points. Is there a way to create bullet point in oracle reports.
I am using paper layout. As output is required in PDF format.
Thanks

Hi Arshad
You may try this trick to introduce bullet character in Reports on Windows platform:
For Boilerplates:
In Application such as Wordpad, hold Alt and press 0149 on numeric pad. This will insert a bullet mark in the editor. Copy this text and paste it in Reports Paper Layout.
For Fields:
Create a formula column (Character type) in the same group as the column that you need to bullet. Return the following result:
return '� ' || :<your_column>;
All the values based on this Formula column will display a Bullet mark.
Hope this helps.
p.s. character 149 is bullet character in most fonts.
Regards
Sripathy

How to type bullet points

I've seen on several topics that you have to type "option+8" to type a bullet point, but when I do so I get: [
I'm using a wireless Apple keyboard so I got no numeric pad.
Thanks
Morten

Option 8 is the key combination on a US keyboard, but it is not clear if you are using a US keyboard layout or some other language. I suggest using Keyboard Viewer to see what key combinations are available on your system. Open the International Preference Pane, click on the Input Menu tab & click the box next to Keyboard Viewer. This will make this available in your menu bar by clicking the flag icon. Select "Show Keyboard Viewer" from the flag menu & you will see a layout of the keyboard. You can then hold down the shift key, the option key OR shift + option to see all the possibilities. The highlighted ones are the accents than you can apply to letters. To get "é" type option-e (nothing will appear), then type e. This accent could be place over most letters. You can change the font in the drop-down menu. Not all fonts will have all characters. Keyboard Viewer places the typing directly into the top, open document.

JSP and JavaScript! How to put session values into html form?

I have a master form which goes to detail form to input data and back to master to Confirm submit operation. I want to put all the form data into request or session variable so it can be retrieved in both the forms. In master form i want to use it in the following way:
MasterForm-onLoad(){
check for form data Object in the session/request
if the data exists
populate the form fields (by getter methods of form data object)
Show the input from detail form
otherwise
show empty form
Now the problem is that it throws null pointer exception if the form data does not exist and i try to access it within an IF statement.
I beleive this is coz the JSP code will be executed on the server before the html page is loaded. Can any one please tell me how to solve this problem.
Thanks and Best Regards
Gul

thats exactly what i m doing but the session variable is not a simple variable or objct, its a serializable object with getters and setters which i will call to retrieve its values. its like this
FormBean formData=(FormBean) session.getAttribute("formData");
now in javaScript i will have to check if the formData is null and than perform the getters or setters.
<script>
function getValues(){
if("<%formData%>"!="null"){
form1.SID.value="<%=formData.getIDVal()%>"
</script>
thats what i was trying to do but the problem is all jsp code will be executed before the page is loaded so it will try to execute inside of the if statement even when the object is null so NullPointerException.
The only way i have got it working so far is to retrieve all the values in the JSP scriptlet, and than use the individual variables as u also mentioned.... SO Far i havnt been successful in calling getter methods in JavaScript. you think it can be done?
Thanks for the reply
GUL

How to put detail records in fixed formÉ

Hi,
I am trying to build a crystal report based on an existing printed form. The form includes elements that look like the following:
Activity
Hot Oiler - 4 mbtu     7mbtu
Pressure Pumping - 5K   10K   15K
Travel - 5K   10K   15K
Standby - 5K   10K   15K
Each Activity also has a quantity, a rate, and a total (quantity * rate) associated with it.
The user used to circle the applicable value on the paper form (for example, if it was a 4 mbtu hot oiler vs. a 7 mbtu hot oiler).
In the application and database the user will enter line items in the work order that specify if it is a Hot Oiler 4 mbtu or a Hot Oiler 7mbtu. Similarly, the user will create a record that is either Pressure Pumping 5k or Pressure Pumping 10K or Pressure Pumping 15K. And so on.
The application is capturing all of this information. I want the crystal report to still display each of these elements as they are laid out on the current paper form however because these are detailed records I do not know how to place them in the report properly. If we take the first line in the form, I created the formula:
+if {field_tickets_has_resources.resources_id} in [150, 151] then
"Hot Oiler - " & "4 mbtu" else
if {field_tickets_has_resources.resources_id} = 163 then
"Hot Oiler - " & "7 mbtu" else
"Hot Oiler - "+
I created another formula for the second line in the form:
+if {field_tickets_has_resources.resource_roles_id} = 15 then
"Pressure Pumping - 5K" else
if {field_tickets_has_resources.resource_roles_id} = 18 then
"Pressure Pumping - 10K" else
if {field_tickets_has_resources.resource_roles_id} in [22, 24] then
"Pressure Pumping - 15K" else
"Pressure Pumping -"+
And so on. However, I cannot place each of these formula beside each other in a details line because it places the values horizontally rather than vertically in the report. I cannot place these in a header because they are actually detailed records.
I hope this makes sense. Any help, as always, is appreciated!
Mark

Hi Mark,
I recommend a similar apporach but the first formula will be created so we can group the records by the Activity type. For example all the Hot Oilers then Pressure Pumping, etc.
We group on this formula then a second formula will build a list of the quantities.
One final formula in the Group Footer will display everything on a single line. We can then hide the Group Header and Detail section because we only want to see one line per actvity type.
Create a group on this formula:
@ActivityGroup
If {field_tickets_has_resources.resources_id} <> 0 Then
   "Hot Oiler"
Else If {field_tickets_has_resources.resource_roles_id} <> 0 Then
         "Pressure Pumping";
This formula will define and reinitialize a string variable for each group. This goes into the Group Header and can be suppressed.
@Initialize
WhilePrintingRecords;
StringVar myQuantity := "";
This formula goes into the Detail section. Based on your first formula I'm guessing the Activity Type is based on which field is populated. I assume only one field per record can have a value that isn't 0.
@Quantity
WhilePrintingRecords;
StringVar myQuantity;
If {field_tickets_has_resources.resources_id} <> 0 Then
   (Select {field_tickets_has_resources.resources_id}
      Case 150 :myQuantity := myQuantity & "4 mbtu "
      Case 151 :myQuantity := myQuantity & "4 mbtu "
      Case 163 :myQuantity := myQuantity & "7 mbtu ";)
Else If {field_tickets_has_resources.resource_roles_id} <> 0 Then
   (Select {field_tickets_has_resources.resource_roles_id}
      Case 15   :myQuantity := myQuantity & "5K "
      Case 18   :myQuantity := myQuantity & "10 "
      Case 22   :myQuantity := myQuantity & "15K "
      Case 24   :myQuantity := myQuantity & "15K ";)
This formula goes into the Group Footer and builds your string.
@Display
WhilePrintingRecords;
StringVar myQuantity;
{@ActivityGroup} & "-" & myQuantity;
All the sections except for the Group Footer can be formatted to hide.
Hope this helps,
Brian

How to chage bullet points to numbers in keynote

Help Please

Hello jorge13jr96
You can do that by following the steps in the article below. I have also also quoted on how to go about doing that.
Add a bulleted or numbered list
http://help.apple.com/keynote/icloud/1/#/gil5f7af8f77
Type one or more items in your list, separating each item with a paragraph break (by pressing Return).
Select the text of the list you typed.
In the Text pane, choose an option from the Bullets & Lists pop-up menu.
Continue typing your list, separating each item with a paragraph break.  Each new line is preceded by a bullet or number in the format you selected.
To end your list, choose None from the Bullets & Lists pop-up menu, then continue typing text without a list format applied.
Regards,
-Norm G.

How to put break point in the update routine

I am trying to create a break point in update routine. I can do that in the start routine but I would like to know how I can include a break point in update routine in Q.
Thanks

Go to Monitor Screen of the data load -> Details tab -> data processing -> right click on Data Packets -> select simulation -> select update rules and give no.of records you want to debug and then system will display the code where you can debug by giving break points.
Hope it helps..

HT2736 how to put more money on your itunes card

i need help putting more money onto a itunes gift card i got a while ago. my grandpa got it for me, now i would like to add money to it myself. but i do not have the card anymore... please help

You don't put more money on an itunes card.
Buy another card

How to put the time on your wallpaper

Trying to get time displayed on my main wallpaper can't seem to do it

What are you talking about? The time is displayed in the status bar at the top when the phone is unlocked and at the home screen. The "wallpaper" isn't dynamic.

How to improve the performance of the forms ?

Hello everyone.
I have two forms, the first is to see the view
of data in the datagridview, and the second
form is to edit and save.
everything is fine, just bothers me
when I move the second form, it gets
slow when dragging.
Will there be a solution?
also in the form of "data view".
How much of Maximum
records can be stored?
because when I move records with a number of
100 records, it becomes slow when
the whole screen.
Here I leave a picture.
greetings to you
Roger García

It could be that you have something running in the background that you didn't trigger, like event firing or else. You can check that by putting break points inside both forms events and methods to track calls.
Fouad Roumieh

How to put bullet points in your form?

Similar Messages

Maybe you are looking for