How to put the time on your wallpaper

Trying to get time displayed on my main wallpaper can't seem to do it

What are you talking about? The time is displayed in the status bar at the top when the phone is unlocked and at the home screen. The "wallpaper" isn't dynamic.

Similar Messages

How to put the current timer in the frame

I am doing one application and i am using frame. I want to show the current time( hour and minute). But i don't know how to implement it. Please help me to solve my problem. Below is the sample code of my program. How to put the timer in the bottom part.
//AdminMenu.java
import java.io.*;
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
public class AdminMenu extends JFrame{
private JLabel lblmenu;
private JLabel lblvideo;
private JLabel lbladmin;
private JButton cmdaddvideo, cmddeletevideo, cmdeditvideo;
private JButton cmdaddadmin, cmddeleteadmin, cmdchangepass;
private Container c;
private GridBagLayout gdlayout;
private GridBagConstraints gdconstraints;
private Color colorValues[] =
{ Color.black, Color.blue, Color.red, Color.green };
public AdminMenu()
super("Administration Menu");
JMenu fileMenu = new JMenu( "File" );
fileMenu.setMnemonic( 'F' );
JMenu openMenu = new JMenu ("Open");
openMenu.setMnemonic('O');
fileMenu.add( openMenu );
JMenuItem exitItem = new JMenuItem( "Exit" );
exitItem.setMnemonic( 'x' );
exitItem.addActionListener(
new ActionListener() {
public void actionPerformed( ActionEvent event )
System.exit( 0 );
} // end anonymous inner class
); // end call to addActionListener
fileMenu.add( exitItem );
// create menu bar and attach it to MenuTest window
JMenuBar bar = new JMenuBar();
setJMenuBar( bar );
bar.add( fileMenu );
setSize(300,250);
setLocation(350,200);
this.setResizable(true);
show();
//---------------------- Main -------------------------------
public static void main(String args[])
AdminMenu app = new AdminMenu();
app.setDefaultCloseOperation(
JFrame.EXIT_ON_CLOSE );
Thanks for helping me

e.g. use a thread that invokes new Date() (every minute), format the Date with SimpleDateFormat and print the result String on a Label that you can put on your frame ...

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

HT201303 Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.

How to put the swf in sub directory

Would you guys let me know how to put the *.swf file which
has *.flv in sub directory other than root.
I've tried many things none of them working.
a regular *.swf are OK. But if that swf file related with
*.flv. that Swf has to be in root directory on the server.
if I put that swf in sub directory such as /swf then it's not
working.
Please, help me out.

Hi,
It looks like this is for the certification, so I won't give you that much helpt. But you could use a modern IDE to do what you want, or use ant (http://ant.apache.org/) for building.
/Kaj
Ps. It looks like your classpath is wrong when you try to run the program.

How to display the time & battery % in home screen

How to display the time & battery % in home screen

Try resetting your device.
Hold down the Home and Sleep/Power Buttons until the Apple Logo shows up.
Ignore the red slider if it appears.
This will reboot the phone, no data should be lost.

Where Should I put the time capsule?

Where Should I put the time capsule?
I'm using a wireless modem/router provided by the internet company, and both (the TC and the router) are located next to the pc, in the living room . Using this way, I don't have signal in my bedroom. Should I get a signal amplifier?
Thanks!

It would be better to use EOP adapters (homeplug is another name) or ethernet to locate the TC closer to your room.. you can use another apple router to extend the wireless if you need to.

How to find the time stamp for delata

Hi Analysts,
I am loading data from R/3 to InfoProvider(Cube or ODS) with delta update.
I have seen nodata was loaded to InfoProvider. But data was available at DataSource. then new delta is started. i want to load the last delta again.
How to see the time stamp of delta?
How to load that delta data?
Please help me in this need.
Hari.

Dear Srihari,
if your last delta failed then you can request it again by calling the same delta infopackage again, it will ask for repeat delta (in case last delta has failed), go and run it.
this way you can have your delta figurs back, and do upload via PSA.
Hope it helps.

How to increase the time for detect a device down on Prime 2.0

Hi,
I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
thanks for your help

Go to the Console, Select the server --> configuration --> tuning tab,
Stuck Thread Max Time and Stuck Thread Timer Interval (give your required time)
This will definitely increase the Stuck Thread time interval.
or
by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
<work-manager>
<name>wm_name</name>
<max-stuck-thread-time>30</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager>

How to delete the Time Evaluation Result in the CLSTB2

Hello,
does anyone know how to delete the time evaluation result in the CLSTB2?
thanks.

Hi Ling,
SE38
program RPUP2D00
Relation Id is B2
in sort field give pernr
tick the check box of delete.
password is your id (ex : saphcm)
Regards,
Harsha

How to find the time difference..?

HI
How to find the time difference between two times
for Example
the difference between '24/10/2005 8:25:00 PM' and '25/10/2005 5:20:00 AM'
is 8.55
Kris

This is a procedure taht do the job
CREATE OR REPLACE FUNCTION Diff_Time
     LD$Date_Deb IN DATE DEFAULT SYSDATE
     ,LD$Date_Fin IN DATE DEFAULT SYSDATE
     ,LN$JJ       OUT PLS_INTEGER
     ,LN$HH       OUT PLS_INTEGER
     ,LN$MI       OUT PLS_INTEGER
     ,LN$SS       OUT PLS_INTEGER
) RETURN NUMBER
IS
dif   NUMBER ;
BEGIN
IF LD$Date_Fin < LD$Date_Deb THEN
     RETURN ( -1 ) ;
END IF ;
SELECT LD$Date_Fin - LD$Date_Deb INTO dif FROM dual ;
SELECT TRUNC ( LD$Date_Fin - LD$Date_Deb) INTO LN$JJ FROM dual ;
SELECT TRUNC ( (LD$Date_Fin - LD$Date_Deb) * 24) - ( LN$JJ * 24 ) INTO LN$HH FROM dual ;
SELECT TRUNC ( (LD$Date_Fin - LD$Date_Deb) * 1440) - ( (LN$HH * 60) + ( LN$JJ * 1440) ) INTO LN$MI FROM dual ;
SELECT TRUNC ( (LD$Date_Fin - LD$Date_Deb) * 86400) - ( (LN$MI * 60) + (LN$HH * 3600) + ( LN$JJ * 3600 * 24 ) ) INTO LN$SS FROM dual ;
RETURN( dif ) ;
END ;
/You may have to modify it to fit your own requirement.
Francois

How to use the time machine?

how to use the time machine? because i don't know where to find the back up. can you please help me.. thankyou.

Time machine is a backup application and service that come with Leopard. When you plug in an external drive you can use it as a backup source. All you do is select the drive in the Time Machine control panel and start the backup. It will back up your whole drive and if you lose a file, go to the location on your drive where that file should be and open the Time Machine application. From there you will be able to migrate to all the points in "time" when the file was changed, and select the version of the file that you want. Then select "restore" and the file will be restored to the location where it last was on your drive.
For more information check out the Time Machine website:http://www.apple.com/macosx/features/timemachine.html

Is there a way to get iCal to put the time of each event on Monthly view without going in and editing each event?

When I enter a new event on iCal with the time, it leaves the time off of the Monthly view and in order for me to glance at the times of the day's events I have to click on each event or go into the event and edit it again putting the time on, for it to show. Is there a way to get it to show without doing this?

Sorry. Only after posting did I see that this question has been asked already and the answer given. Please ignore this post.

How to populate the time component of a cube?

We have a question regarding how to populate the time component of a cube. Let me explain:
We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for every dimension (e.g., "customer" and "customer_id" for the "customer" dimension).
We understand that, in this case, "customer_id" stands for the dimension business key, so we create an arrow from the business key in the source table to the "customer_id" column in the cube operator.
So far so good. The mapping works all right, and the cube is loaded correctly.
Now we need to do the same for the time dimension. We have already created the time dimension and we have loaded it. We have also included it in the cube, so now we have two new columns in it: "time_day_code" and "time", both NUMBER data type.
We have the "sale_date" column (DATE data type), in the source system and, of course, now we want to populate the date column in the cube. We suppose that, somehow, we have to translate the "sale_date" field into the numeric column of the surrogate key of the time dimension. How should do we do this? I suppose that OWB must do the translation for us, just as it does for the other dimensions, but how? We have been looking into the manuals, and we have found no explanation on how to go about this.
Any help would be appreciated.
Best regards
Juan Algaba

Hi Juan
You are right this should have been in the manuals, checked and there is only a brief mention (Using a Time Dimension in a Cube Mapping section)
The identifier format should have been documented for each level and will involve creating the formatted attribute for input to the cube operator's time dimension reference attribute.
The time dimension business keys are stored as follows;
Day Level - YYYYMMDD
Month Level - YYYYMM
Week Level - YYYYWW
Quarter - YYYYQ
Year - YYYY
If you have a source that has a SQL date datatype for example and want to construct the key for a cube's time dimension at the day level something like the following expression can be used to construct the time reference from a SQL date...
to_number(to_char( time_key, 'YYYYMMDD'))
The result of this expression can be used as input to the cube's time dimension attribute.
Cheers
David

How to put the time on your wallpaper

Similar Messages

Maybe you are looking for