How to read multiple tab Excel

HI All,
Is it possible to read multiple tab of a Excel using ABAP ? Can any one provide any solution or link for help me out.
Thnnks a lot.
Regards
Marko

HI,
please check this thread. Hope it will solve your problem.
[url] Upload multiple tab of a excel into Different internal table [url]
Regards
Satrajit

Similar Messages

How to read Multiple sheet Excel file( One of the sheet generated by rule )

Hi Folks,
I have one critical requirement about reading an Excelsheet.
I have an Excelsheet, which has got 2 tabs. Now TAB1 is having the data stored and TAB2 has got data, which is created by some Rule using in Excelsheet.
Now when i am trying to pass this Excel sheet to Function module ' TEXT_CONVERT_XLS_TO_SAP' this Fucntion Module is returning the data from TAB1. But my requirement is that, i have to read data from TAB2, which is generated by implementing some rule on TAB1.
So Please help, me how can i read the multiple sheet Excel document and how to read the tab , which is generated by some rule.
Thanks.
PG

Hi Guru,
Thanks for your reply.
I have seen this blog, and treid to implement the code. But when i am caaling method GET_RANGES_DATA
in the program, it's hanging my whole program and followed by hanging my SAP login.
I have no clue, why my program is getting hung up, bcoz of this call.
After debugging this method, i found that the program is getting hung up at call of one function module DP_GET_TABLE.
This Function Module is internally called by above menthioned method.
So please let me know, if you have some input on above issue, or if you know some other way to implement this problem.
Regards
PG

How to read a tab seperated data from a text file using utl_file

Hi,
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
Thanks in advance...
Naveen

Naveen Nishad wrote:
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

How to Read data from excel file without converting a excel file into .csv or any other format

Hello,
Can somebody suggest me how to read from an excel file (consisting of 10 work sheets) to an array?
Thanks,
She

You have to be careful when using the spreadsheet-files vi's. They are located in the Functions Palette under File IO, you will find "Write To / Read From Spreadsheet File.vi"s.
Here is what the Context Help says about the vi function:
"Reads a specified number of lines or rows from a numeric text file beginning at a specified character offset and converts the data to a 2D, single-precision array of numbers. You optionally can transpose the array. The VI opens the file before reading from it and closes it afterwards. You can use this VI to read a spreadsheet file saved in text format. This VI calls the Spreadsheet String to Array function to convert the data. "
This is quick & easy when the spreadsheet is all the same format. You can set the format to string as well. HOWEVER... you do have to convert the Excel spreadsheet to text before using it.
I haven't experimented with the Active-X, but it may look as the way to go if you have combination text / numeric values in the spreadsheet.
If you did convert it to text, then you can use array functions as well and treating the file as an array of strings (see very brief example attached). The example is to illustrate a point only
JLV
Attachments:
starting point for spreadsheet.vi ‏28 KB

How to read multiple lines using 'REUSE_ALV_GRID_DISPLAY'

Hi,
In ALV report the FM 'REUSE_ALV_GRID_DISPLAY' used.
EXPORTING
I_CALLBACK_PROGRAM = W_REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
How to read multiple lines in the following dynamic subroutine ?
I am able to read single value through p_selfld.
Nut the requirement is to change the values in more than 1 row for a fld (edit mode)
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELFLD TYPE SLIS_SELFIELD.
endform
Thanks in advance

You can get the reference by a dirty assign, but this is not offcially supported...
But if you have some limitations.
FORM user_command USING fuw_ucomm LIKE sy-ucomm
 fuw_selfield TYPE slis_selfield.
FIELD-SYMBOLS: <lfs_grid> type ref to cl_gui_alv_grid,
 <lfs_row> type LVC_S_ROW.
data: li_rows type lvc_t_row.
 assign ('(SAPLSLVC_FULLSCREEN)GT_GRID-GRID') to <lfs_grid>.
 check sy-subrc is initial.
 call method <lfs_grid>->get_selected_rows
 IMPORTING
 et_index_rows = li_rows.
endform. "user_command

Multiple tabbed excel

Hi,
I have a requirement where i need to put data in various tabs in excel, is it possible to genrate excel report with multiple tabs through oracle report builder, if yes then please guide me how to go about it.
Thanks...
Ashish

Hello,
you can use XML-format to generate reports with more than one worksheet using PL/SQL only and there are free packages to do so:
https://xml-spreadsheet.samplecode.oracle.com/
or
https://exceldocumenttype.samplecode.oracle.com/
Regards
Marcus

How to read multiple dat files.

Hello Everyone!
I am working on a project that requires one file that creates a JFrame with a current file title, JTextFields that accesses two .dat files and a JButton.
The user clicks a JButton to cycle through the first sequential .dat file. When the end of the first file is reached the file is closed, the JFrame title is changed to the second file title as the user continues to click the JButton to continue on viewing the second file?s records, until the second reaches the end of file.
The project requires using Try-Catches to catch the EOF exceptions and IOExceptions and Thread or Runnable.
I have been able to get one file to read and display its records; however, researching back through my text on how to read/write to files I haven?t been able to determine how to get to the end of the file and proceed to the next file without triggering the EOFException. I have even tried multiple Try-Catches (one for each file within the actionPerformed method) and that ends up ignoring the first file records and only displays the second files records.
This is a school project and we have only covered just the bare basics of Java over the last two months. So, any hints that anyone can provide can only be of what type of procedure will be needed or what procedure won?t help to complete the task, without giving away the solution.
I have spent approximately 40 hours of study time on this project and believe that I have definitely run into a major snag.
The following is the code I have so far:
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class StudentRead extends JFrame implements ActionListener
   private JLabel gradStudentList = new JLabel("GRADUATE Student List");
   private JLabel undergradStudentList = new JLabel("UNDERGRADUATE Student List");
   private Font bigFont = new Font("Helvetica", Font.ITALIC, 24);
   private JLabel userprompt = new JLabel("View the students");
   private JTextField idNumText = new JTextField(4);
   private JTextField lastNameText = new JTextField(15);
   private JTextField firstNameText = new JTextField(15);
   private JButton viewRecordButton = new JButton("View Record");
   private JLabel idNumberLabel = new JLabel("ID Number");
   private JLabel lastNameLabel = new JLabel("Last name");
   private JLabel firstNameLabel = new JLabel("First name");
   private Container con = getContentPane();
   DataInputStream gradStudentInStream;
   DataInputStream undergradStudentInStream;
   public StudentRead()
      super("Read Student Records");
      try
         gradStudentInStream = new DataInputStream(new FileInputStream("GradStudents.dat"));
         undergradStudentInStream = new DataInputStream(new FileInputStream("UndergradStudents.dat"));
      catch(IOException e)
         System.err.println("File not opened");
         System.exit(1);
      setSize(325, 200);
      con.setLayout(new FlowLayout());
      gradStudentList.setFont(bigFont);
      con.add(gradStudentList);
      con.add(userprompt);
      con.add(idNumberLabel);
      con.add(idNumText);
      con.add(lastNameLabel);
      con.add(lastNameText);
      con.add(firstNameLabel);
      con.add(firstNameText);
      con.add(viewRecordButton);
      viewRecordButton.addActionListener(this);
      setVisible(true);
      setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
   public void actionPerformed(ActionEvent e1)
      String lastName, firstName;
      int IdNum;
      try
         IdNum = gradStudentInStream.readInt();
         lastName = gradStudentInStream.readUTF();
         firstName = gradStudentInStream.readUTF();
         idNumText.setText(String.valueOf(IdNum));
         lastNameText.setText(lastName);
         firstNameText.setText(firstName);
      catch(EOFException e2)
         closeFile();
         System.exit(0);
      catch(IOException e3)
         System.err.println("Error reading file");
         System.out.println("out");
         System.exit(1);
   public void closeFile()
      try
         gradStudentInStream.close();
         System.exit(0);
      catch(IOException e)
         System.err.println("Error closing file");
         System.exit(1);
   public static void main(String[] args)
      StudentRead rsr = new StudentRead();
}

deepak_1your.com wrote:
hi,
If you want to read a file guarding yourself agianst exceptions....
check this article.... the code presented in this article might suit your needs...
[http://1your.com/fusion/infusions/articles/readarticle.php?article_id=17|http://1your.com/fusion/infusions/articles/readarticle.php?article_id=17]
And how does that help with a DataInputStream?

How to save multiple tabs at once?

Before updating I had the option to save multiple tabs in one simple click. For instance If I had opened 5 tabs and I wanted to save them all at once in one group there was the option for it, now that option seems to have dissapeared? Can I get it back somehow? It was so easy... If not, can i install the earlier version of Firefox? I don't like it when good things dissapear...

You can do that by doing one of the following:
*Right-click on a tab and choose "Bookmark All Tabs"
*Ctrl+Shift+D
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe Shockwave for Director Netscape plug-in, version 11.0
*Adobe PDF Plug-In For Firefox and Netscape
*Shockwave Flash 10.2 r152
*Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How to read multiple arguments separated with space in one line

How to modify the
public static void main (String[] args){
}so that it can read multiple arguments separated with space in a single line?
e.g.
java myprogram username password host
java myprogram2 ipaddress port
Thx.

public static void main (String[] args){
int index = 0;
for(String arg : args) {
System.out.println("args["+(index++)+" = "+arg);
}

How to create multiple tabs of report in 1 crystal report file

Hi,
Is there any feature in Crystal report 2008 on creating multiple tabs of report similar to Web-I?
If there is, could you give me help on this.
Thank you in advance.
Rose

Hi Rose,
I think we cant achive the same functionality in Crystal Report designer.
Regards,
Shweta

How to read multiple Digital samples and plot a chart with time stamps

Hi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input'
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi ‏27 KB
DigitalNSample.vi ‏27 KB

Hi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input' using NI USB 6009 or NI USB 6251.
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi ‏27 KB

How to include multiple tabs in my show form

Hi
As per my requirement I want to include multiple tabs in my show form using xmlform builder , different tabs are required to display the news under different categories which will help the user to choose the required tab.
Thanks in advance.

Hi,
According to my understanding,
You are trying to create an xml template using xml form builder in such a way that once we publish the news using this template, it should be shown to the end user in the form of different tabs. Each tab will display some part of the news that we published.
Correct me if I am wrong.
The above functinality is not possible using xml form builder as far as I know. You should think of other ways to achieve it.
Raghu

How to read multiple documents from a system directory?

Hi,
I'm trying to read multiple documents from a specific folder that contains pdfs, jpgs... the only activity I found is the Read Document, but this activity does not have the option to read all docs under my folder!.
so any one can tell me if there is another activity can do it or is there any good solution to loop on the folder and read all the docs? any script will be helpful.
Thanks
Hussam

Hi,
After many hours of searching and readings, I found a solution, I do not know if it is the best, but anyhow this is my solution:
By using a service operation called "Find" from a service named "FileUtilsService", this operation will return a list of strings with the names of all files and/or directories under the path you want.
Then by using the "Read Document" I was able to get one file and store it in a dcoumnet variable, and by using a simple looping technique I got all the files I want.
hope this will help others
Hussam

How to read multiple files of a specified format from a selected folder?

i want to read multiple files of specified format from a selected folder, even if the selected folder contains multiple sub-folders, is it possible, if so please provide me a sample.

try this:
foreach (string dirPath in Directory.GetDirectories(WriteYourPathHere, "*",SearchOption.AllDirectories))
string[] files = System.IO.Directory.GetFiles(dirPath, "*.txt");
//loop over files array and do what you want with .txt files picked up during the loop
OR in one line also:
foreach (string file in Directory.GetFiles(WriteYourPathHere,
"*.txt", SearchOption.AllDirectories))
Fouad Roumieh

How to read multiple voltages from DAQ at same time?

Hello all,
I am attempting to read multiple voltage inputs to my USB-6008 DAQ but when I try to read a second voltage, I get an error saying "Erorr 50103 the resource is reserved." Someone in another thread said:
"The reserved resource is your DAQ board. You should not be using two separate simultaneous tasks for the same DAQ board. You should use a single task with two channels configured."
So I made multiple channels in one task, but I don't want to read all the channels at once. Is there a way to specify which channel of the task to read? Or is it not possible to acquire multiple voltages from the DAQ at all?
So the question boils down to: if you have 3 different voltage inputs into your DAQ, all corresponding to different components, is there a way to be tracking and reading all of them at the same time?
Thanks a lot

shahidi124 wrote:
Hello all,
I am attempting to read multiple voltage inputs to my USB-6008 DAQ but when I try to read a second voltage, I get an error saying "Erorr 50103 the resource is reserved." Someone in another thread said:
"The reserved resource is your DAQ board. You should not be using two separate simultaneous tasks for the same DAQ board. You should use a single task with two channels configured."
So I made multiple channels in one task, but I don't want to read all the channels at once. Is there a way to specify which channel of the task to read? Or is it not possible to acquire multiple voltages from the DAQ at all?
So the question boils down to: if you have 3 different voltage inputs into your DAQ, all corresponding to different components, is there a way to be tracking and reading all of them at the same time?
Thanks a lot
I don't understand your question. You made a task to read all the channels at once, but you do not want to read all the channels at once? And you want to track and read all the channels at the same time?
You need to explain it a little bit better and add some code of what you have done so far. A task will read all the channels in the task and give you the results so you can track them. So I am confused.

How to read multiple tab Excel

Similar Messages

Maybe you are looking for