How to redirect Goods Receipt IM output to a specific printer by user
We currently print a custom Goods Receipt pallet label that we defined as Output Type YE01. The IM printer determintion utilizes the 'by Plant / Storage Location / User Group' option (transaction OMJ4, table TNAD9).
When the receipt if for a particularly large number of pallets, the business would like the flexibility of redirecting the label output to a different, high volume printer.
I'd like to kindly request feedback on how this might be accomplished.
I have looked at the 9 User Exits for MIGO (MBCF002 etc...) but don't see anything suitable.
One idea was to cause a small popup window to appear during the MIGO goods receipt asking the user for the desired printer, which could be selected from a dropdown.
Thanks in advance for any ideas.
Hi Michael,
I remember issuing error messages in the form USEREXIT_KOMPBME_FILL in the pgm RVCOMFZ2, so you should be able to also show a pop-up there. But unfortunately, I don't have an idea how to make the output to go to the printer that the user chooses there.
BR
Raf
Similar Messages
-
Hi All,
We are using SAP 8.8
how to close Goods Receipt PO that has been pulled to A/P Invoice with a partial amount of freight ?
i.e.
Our GRPO has freight 5000.
On pressing COPY FROM button in A/P invoice we selected that GRPO
On Pressing Customize button
Items in the GRPO appear
We selected all items and press next
Freight appears
We edited freight amount from 5000 to 3000 and pulled GRPO into invoice and saved.
After this OUR GRPO and freight remains
Guidance in this is really needed as we want to tally stock
Thanks
MalhaarHi Malhaar......
Does it happen all the time like this reversal of entry?
Like how you tested in demo this kind of scenario I would suggest you to do this excercise too.
So that you get knowledge about that and Today you are asking this doubt but after doing this excercise you will come to know the exact effect and next time you can suggest this to others if he has same problem and will become expert in SAP
All the Best
Regards,
Rahul -
How to post goods receipts from intra company two step scenario.
Hi Guys,
Intra company scenario between two plants of same company code.
My process is as follow
1. Created STO
2. Created delivery doc through VL10B
3. Did the PGI
Once I post the PGI doc material status is goods in transit, from this stage I want to create goods receipts at receiving plant.
Can any one suggest how to create goods receipts from material in transit position....
Thanks and Regards
Chandra Sekhar AlokamDear Chandra Sekhar Alokam,
You can follow std process to do GR using MIGO wrt: Outbound delivery document created in VL10B.
in Intracompany STO-
Go through the SAP Help, -
[Cross-Company STO|http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm]
Movement Type - 645 ( one step) & 643(two step)
Regards,
Reazuddin MD -
How to make good receipt?
how to make good receipt for material?
Hi,
Create it with <b>MB01</b> Transaction
Have a look at this one
http://help.sap.com/saphelp_erp2005/helpdata/en/eb/13750743c411d1896f0000e8322d00/frameset.htm -
How to include in the sub-menu a table specifies of the user - UDO
hi, forum
how to include in the sub-menu a table specifies of the user
I created a table '@ IA_RELAT' in User-Defined Obejcts but I don't know as including in the sub-menu that I created
it follows my code
Private Sub SBO_Application_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.MenuEvent
If (pVal.MenuUID = "MySubMenu") And (pVal.BeforeAction = False) Then
Try
<u201DmyTableName->@IA_RELATu201D>
Catch
SBO_Application.MessageBox("The Form already exists")
End Try
End If
thank you
End SubHi David
Excuse me but I didn't find in MenuCreationParams Objects how to do this call of the table '@ IA_RELAT' created in User-Defined Obejcts
It follows my code
in AddMenuItems I set up the Menu and Submenu
in SBO_Application_MenuEvent it is where I am having difficulties of showing the table '@ IA_RELAT' created in User-Defined Obejcts
Thank you for any help
Private Sub AddMenuItems()
Dim oCreationPackage As SAPbouiCOM.MenuCreationParams
oCreationPackage = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_MenuCreationParams)
oMenuItem = SBO_Application.Menus.Item("43520") 'moudles'
Dim sPath As String
sPath = Application.StartupPath
sPath = sPath.Remove(sPath.Length - 3, 3)
oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_POPUP
oCreationPackage.UniqueID = "MyMenu01"
oCreationPackage.String = "Standard cost"
oCreationPackage.Enabled = True
oCreationPackage.Image = sPath & "UI.bmp"
oCreationPackage.Position = 15
oMenus = oMenuItem.SubMenus
Try ' If the manu already exists this code will fail
oMenus.AddEx(oCreationPackage)
'// Get the menu collection of the newly added pop-up item
oMenuItem = SBO_Application.Menus.Item("MyMenu01")
oMenus = oMenuItem.SubMenus
'// Create s sub menu
oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_STRING
oCreationPackage.UniqueID = "MySubMenu"
oCreationPackage.String = "Auxiliary Table"
oMenus.AddEx(oCreationPackage)
Catch er As Exception ' Menu already exists
SBO_Application.MessageBox("Menu Already Exists")
End Try
End Sub
Private Sub SBO_Application_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.MenuEvent
If (pVal.MenuUID = "MySubMenu") And (pVal.BeforeAction = False) Then
Try
SBO_Application.ActivateMenuItem(menus.Item(1).UID.IndexOf("@IA_RELAT"))
Catch
SBO_Application.MessageBox("error")
End Try
End If
End Sub -
Hello Dears,
How can we see the output of GR form.
How can we trigger this ouptut.
I know the PO number but i donot know the procedure to see the output.
Appriciate your guidence in this regard.
Thanks in advance.Hi,
Go to Nace --> Application and Description --> ME -->click on output types.There select an output type in the list of output types given and then click the Processing Routines where you will get the complete details.
For goods Receipt you will find the output types here.
Thanks,
Abhijit -
How to generate goods receipt / goods issue (gr/gi) slip no. ?
Hi all SAP experts,
i did following steps
1) by using omc1 assigned gr/gi slip number for our plant.
2) created internal number range for no. range group code.
3) intervals are created for gr/ir slip in 2009 by using omj6 t-code.
4) assigned no. range group code to plant and movement type 101.
When i create Purchase order and taking goods receipt w.r.t. p.o. still gr/ir slip no. not generated internally . I checked it for MB51 t-code still gr/gi slip column is empty i.e. no number generated.
So how can i do gr/gi slip no. generated internally ? and what is the transaction for printout of gr/gi slip no. or related configuration ?
regards,
Nitin NerkarDear,
Make this field RM07M-XABLN as mandatory in OMJX transaction and check it in OMC1.
Regards,
R.Brahmankar -
How to find Goods Receipt Number particular to Service Entry Sheet Number.
Hi Experts,
In one of my reports i need to bring purchase order ,service entry sheet, goods receipt number .
In ekbe i am getting the purchase order and its service entry sheet while keeping BEWTP = 'D'.
so i am getting purchase orders and their service entry sheet numbers in belnr.
Now i want to get the corresponding goods receipt number .
But i am getting goods receipt number against the purchase order but not against service entry sheet , in same EKBE
while keeping BEWTP = 'E' movement type = '101'.
My doubt here is how to get the corresponding goods reciept number for a service entry sheet.
if i have three service entry sheet numbers for a purchse order i have three goods receipt numbers
but how to get the relation between them which GRN to which service entry sheet
. is there any table which stores the service entry and its grn.
If i am any thing functionally wrong which i wrote above please correct me and give ur inputs.
Thanks
vamsi
Edited by: vamsi talluri on Aug 20, 2009 7:21 PMHi Sarath,
If the Purchase order Item category is 'D' then it is a service order then it can have N service entry sheet numbers and once each service entry sheet is accepted it will be available for Goods reciept .. so that information will be avaiable..
U can obtain the GRN against the Service entry sheet in EKBE itself.
BELNR refers to GRN
LFBNR refers to Service entry sheet number.
And hence i am closing the thread.
Thanks
vamsi -
How to Cancel Goods Receipt PO
Hi all,
We selected the wrong vendor on a Goods Receipt PO. How can we cancel or reverse this transaction?
Thanks,
JaneHi,
Create a Good Return, this is the correct way of cancelling this transaction. This will be an exact reversal of the GRPO. Chosing to Closing the document manually will create a posting on the Goods Clearing Account and will not reverse the stock transaction.
Hope it helps,
Jesper -
Hi all experts,
In my case ,I want to use FM:BAPI_INB_DELIVERY_CONFIRM_DEC to post the inbound delivery . I want to pass goods receipt date when calling this fm. according to fm documentation as below,can use HEADER_DEADLINES to do it ,but in coding , How to implement it?
thank you in advance.
Bests & Regards.
In this table, header dates are passed on in time stamp format (YYYYMMDDHHMMSS). In field BAPIDLVDEADLN-TIMETYPE the individual date fields are qualified as follows:
- WSHDRLFDAT Delivery date
- WSHDRWADAT Goods receipt date (planned)
- WSHDRWADTI Goods receipt date (actual)Hi,
I have got the same scenario to populate the Actual Goods Receipt date from IDOC. Can you please let me know the solution that you implemented for this? I understand that this was long time back. But if you could recollect, please let me know the details.
Thanks,
Vanitha -
Vendor slit material to smaller size.How to do Good receipt on new mat?
Hi,
I need to raise a PO for slitting services to my vendor. We are providing material A to them.
Then, vendor will helps us to slit the Material A into smaller size of Material B.
1. How is step on Good receipt? We are not receipt the Material A, but Material B
2. Material A and Material B is different material type. Mat A is raw material, Mat B is semi finish goods.
Please suggest what is end to end process to perform?
ThanksCreate a BOM,Create a subcontracting P.O with material B as parent,material A as child.
Declare material as subcontracting in J1ID & also maintain assesable value if it is excisable.
Issue material to subcon. vendor using MB1B 541 Mvmt.
If it is excisable also create subcontracting challan using J1IF01 & print it.
Receipt material B using MIGO.
Reconcile receipt quantity using J1IFQ.
Do vendor invoice using MIRO for receipt qty. -
How to control goods receipt for order by mb31 if order is not confirmed
Hello friends,
I want to restrict the goods receipt for process order if order is not confirmed or partially confirmed.
Through user status i can control that if order is confirmed than whether to allow goods reciept or not.
But how to achieve my above requirement.
Thanking you guys in advance.Dear Jitendra,
Check this link
How to stop the goods receipt before issueing the goods for production orde
Regards
Mangalraj.S -
How to change goods receipt time for a plant?
Hi All,
How do I change the goods receipt time for a plant?
Thanks for your help!!!
Ranahi,
GR time is defined for the specific material ..it is defined as GR processing time..in the Material master in the MRP view...
Pls check ...
Hope it helps..
Regards
Priyanka.P -
How to set Goods Receipt Indicator in PO based on Vendor or PO doc type
Hi.
Can someone suggest any solution to automatically set the Goods Receipt Indicator in PO (ME21N) to "blank" (untick) based on either a vendor or a PO doc type.
Thanks.
TessYou can untick it from vendor master and info record.
1. Using MK02 - Go to purchasing data and the untick the GR-based Iv
2. In info record for the vendor and particular material - purchasing organization data1 -
DTW : How to Create goods receipt with quantity exceeding purchase order ?
Hello DTW Experts,
is there any way to deliver or receive an quantity exceeding the quantiy of the purchase order using DTW, or the only way is to create additional order (create a goods receipt is based on a purchase order).
When i try the system gives me these 2 different messages :
1 - One of the base documents has already been closed PDN1.BaseEntry[line: 1]Erreur définie par l'application ou par ...
2 - One of the base documents has already been closed Erreur définie par l'application ou par l'objetoPurchaseDeliveryNotes
Thanks,
HafidThe best way is to draw the purchse order through then add an additional line to the Goods Receipt for the additional quantity. This will close the PO properly, but record the additional quantity
Maybe you are looking for
-
Power adapters and worldwide compatibil​ity - a lesson
The standard fare today in power adapters is such that the brick itself is compatible around the world. Indeed, the input power on a Lenovo AC adapter is rated from 100-240V and 50 or 60Hz - capable of operating on any power standard. The only catch
-
However, I can show a PPT display. What if I want to do a live web demo from my desktop internet connection?
-
TopLink, Netbeans 7.4 with embedded Java DB
Hi, I need some guidance please as I'm new to this subject. I'm building a Java SE application of a catalogue of music albums and I've looked at the few tutorials (specific to NetBeans) about data binding and TopLink Essentials. However, none of the
-
Dear all, I have created a control recipe , and released the process order , in the error log is empty but I am unable to see PI sheet please explain what could be the reason regards venkat
-
Need help on selectedIndex Property
Hi, We are facing a issue in our screen which is developed using Flex Builder 3.0. We have Extended the Functionality of "AdvancedDataGridColumn.as" to have List of Values(LOV) editable column in it. User can add rows to the Advanced Data Grid by Cl