How to remove sound notification opening and closing foxfire

When ever I open or closed foxfire 36.0.4 I get a gong sound, would love to disable.

Could you go into the Windows Control Panel, Hardware and Sound category, "Sound" or "Change System Sounds". This should launch a dialog with four tabs, with the Sound tab active.
In the scrolling list box, can you confirm that no sound is assigned to Close Program or Open Program? If sounds are assigned to those, of course, clear them.
If those do not have a sound, it's time to play detective and test the other events. In particular, I would look for:
* in the Windows category, "Menu Command"
* in the Windows Explorer category, "Complete Navigation"
If those are not assigned, you could arrow through the list clicking Test (or using the keyboard shortcut Alt+t) and listed for the unwanted sound.

Similar Messages

How to change category on open and closed PO and Requisition lines

We realized a little late that our category definition needs change. But when we change the category definitions (including structure) how do we change the existing PO lines and Requisition lines to have the new categories? We checked for any APIs, but there are none. What other option do we have?

changing the name of the home directory and the login name is not advisable. it can be done
http://www.macworld.com/article/132693/2008/03/changeshortusername.html
but a better way would be to make a new user account using system preferences->accounts. call it whatever you want. log into that and delete the old account. since you just got this computer you don't have any data on it yet, right?

Calculating opening and closing stocks at a plant (on specific dates)

Hi,
I am to develop an ABAP-report. On the selection screen, I'll have plant, material, and a date range (date_1 and date_2). The report should show opening stock on date_1, closing stock on date_2, and then there is more segregation based on movement types (along with both stock-quantity and stock-value). I am stuck at how-to's around calculating opening (and closing) stock on a particular date.
Secondly, transaction MB5B has 3 options : batch stock, valuated stock, special stock ... One of these options uses table MBEW and other uses table MARD ... Which (all) tables will I need to use so as to get both stock-quantities and stock-values ?
Please advise. Thank you.
Regards,

Hi
for second question answer is
you need to consider all batch stock, valuated stock, special stock ... One of these options uses table MBEW and other uses table MARD to get both stock-quantities and stock-values
hope it helps
Edited by: ppkk on Dec 10, 2008 10:58 AM

How to open and closed posting period??

Dear Gurus,
Pls help me, how to open and closed posting period.when and how we used special period.
Regrds
Mahesh

HI,
Tcode is ob52
here we generally provide the following details
a/c type from a/c to a/c from period year to period year from period year to period
+ 1 2007 12 2007 13 2007 16
+ implies it applicable to all account types
generally we can have maximum 4 special periods and total no of periods(normal+special) should not exceed 16
generally we use special periods for year end adjustments like tax adjustments
if it is useful assign me points

How to calculate opening and closing balance for period

Hi all,
i have to find out opening and closing balance.
the table structure of temporary table is
select * from hwcn_xn_fa_report_temp1 where asset_id=10029400
PERIOD_COUNTER CST_OP_BAL CST_ADDITION CST_TRANSFER CST_DISPOSAL COST_CLOSING_BALANCE
24108 0 0 0
24109 12000
24110 0 0 0
24111 0 0 0
in this table cst_op_balnce and cost_closing_balace is null
i have display cost_op_bal and cost_closing_balnce
cost_closing_balance=cst_op_bal+cst_addition+cst_transfer+cst_disposal
for period 2408 op_balnce=0 closing_bal=0
for period 2409 op_balnce=0 closing_balce=1200
for period 2410 op_bal=1200 closing_bal=1200
closing balance of dec will be opening bal of jan
thanks and regards
Edited by: user10664276 on Apr 19, 2009 11:08 PM
Edited by: user10664276 on Apr 19, 2009 11:13 PM

Hi,
user11118871 wrote:
Can you explain what that is? Thank you if you have one example.
ROWS BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING
When you use the analytic SUM (c) function, then, on each row, it returns the values of column (or expression) c from several rows in the result set added together.
Which rows? That depends.
If the analytic clause (the part in parentheses after OVER) does not include ORDER BY, then it is all rows.
If the analytic clause has an ORDER BY clause, but no windowing clause (that is, ROWS BETWEEN ... or RANGE BETWEEN ...), then the rows included in the sum are all rows up to and including the row where the function is being called (as sorted by the analytic ORDER BY).
If the analytic cluase has both ORDER BY and a windowing clause "ROWS BETWEEN x PRECEDING AND y PRECEDING", then the rows included in the sum are the rows from x to y rows before the one where the function is called.
Do some experiments with different values of x and y.
First, create a table like the one in the problem above, but simplified a little.
CREATE TABLE     test_sum
(      period     NUMBER
,      new_amt     NUMBER
INSERT INTO test_sum (period, new_amt) VALUES (24108,     1);
INSERT INTO test_sum (period, new_amt) VALUES (24109,     4);
INSERT INTO test_sum (period, new_amt) VALUES (24110,     2);
INSERT INTO test_sum (period, new_amt) VALUES (24111,     8);
INSERT INTO test_sum (period, new_amt) VALUES (25001,     32);
INSERT INTO test_sum (period, new_amt) VALUES (25002,     16);
COMMIT;The original problem above used names that were meaningful for its application, and columns that have nothing to do with the SUM function. Let's simplify the former and lose the latter.
That problem involved the SUM of three columns added together. Since we just want to understand how the windowing clause works, let's simplify that to one column.
With these simplifications, my original query is:
SELECT       period
,       new_amt
,       SUM (new_amt) OVER ( ORDER BY          period
                                     ROWS BETWEEN UNBOUNDED PRECEDING
                             AND          1            PRECEDING
                    ) AS opening_balance
,       SUM (new_amt) OVER ( ORDER BY          period
                    ) AS closing_balance
FROM       test_sum
ORDER BY period;Given the data above, it produces these results:
.   PERIOD    NEW_AMT OPENING_BALANCE CLOSING_BALANCE
     24108          1                               1
     24109          4               1               5
     24110          2               5               7
     24111          8               7              15
     25001         32              15              47
     25002         16              47              63So, for example, on the row where period=24110,
opening_balance=5, which is the total of new_amt from all rows up to but not including that row: 5=1+4, and
closing_balance=7, which is the total of new_amt from all rows up to and including that row: 7=1+4+2.
To really understand how the windowing clause works, do some experiments. Change the definition of opening_balance to include " BETWEEN x PRECEDING AND y PRECEDING". You'll find that:
(a) "UNBOUNDED PRECEDING" means the same as "n PRECEDING", where n is greater than the number of rows in your result set.
(b) "CURRENT ROW" means the same as "0 PRECEDING"
(c) x must be greater than or equal to y
(d) neither x nor y can be negative (but you can use "FOLLOWING" instead of "PRECEDING" to get the same effect).
For more, see the introduction to "Analytic Functions" in the [SQL Language manual|http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/functions001.htm#sthref972]
When you're finished, don't forget to
DROP TABLE     test_sum;

HT4528 the camera on my iPhone 4s color is all weird and the shutter keeps opening and closing trying to fix its self but cant. I rest my phone and turned it off and back on again.. how do i fix this. I only had the phone maybe six months.

The camera on my iPhon 4s is not working correctly. It is colored all strange and the shutter keeps opening and closing trying to fix the problem but it cant. I have already reset my phone and turned it off and on again. How do I fix this??

If resetting the camera app doesn't work you can try restoring your iPhone's software. The entire process takes about an hour to an hour and a half. Make sure you do a backup. Make sure you do a backup.
Backup:
http://support.apple.com/kb/HT1766
Restore:
http://support.apple.com/kb/HT1414

How can detect that cdrom drive were opened and closed?

How can detect that cdrom drive were opened and closed?

I'm sure there are more elegant and complicated ways to accomplish this using Windows SDK function calls to kernel32.dll or something extravagant like that, but if you want the bare-bones easy way to check if the CD-ROM tray is currently opened, then simply use System Exec to query the CD-ROM drive from the command line. One example of this is shown below.
Use the command line function cmd /c d:, where d: is your CD-ROM drive. If the Standard Error output from System Exec.vi is "The device is not ready." followed by a carraige return and line feed, then voila, your CD-ROM drive is open. If not, it's closed. Anyone have a better idea? I'm sure one exists...
Message Edited by Jarrod S. on 02-16-2006 12:23 PM
Jarrod S.
National Instruments
Attachments:
CDROM_Check.JPG ‏22 KB

How to trap opening and closing of adobe print dialog?

I'm working on a asp.net page with dynamically embedded pdf document in it.
I'm using embedded javascript to print the pdf document after a button click and some processing serverside.
As you know print dialog doesn't open immediately and it takes some to open.
And now I'm in a situation where I need to trap opening and closing events of pdf print dialog,
as internet explorer doesn't wait for print dialog to be closed before returning the page control flow to my
script and as a consequence the user will not be aware of opening print dialog and maybe perform other actions
without printing.
Thanks in advance for any HELP!

I'm working on a asp.net page with dynamically embedded pdf document in it.
I'm using embedded javascript to print the pdf document after a button click and some processing serverside.
As you know print dialog doesn't open immediately and it takes some to open.
And now I'm in a situation where I need to trap opening and closing events of pdf print dialog,
as internet explorer doesn't wait for print dialog to be closed before returning the page control flow to my
script and as a consequence the user will not be aware of opening print dialog and maybe perform other actions
without printing.
Thanks in advance for any HELP!

Since upgrading my iphone 4 to IOS6, apps keep opening and closing on their own

Since upgrading my iphone 4 to IOS6, apps keep opening and closing on their own and the wrong ones open when another is pressed. I've tried a full reset but still the same thing...HELP PLEASE :-(

I'm not familiar with the Belkin cover, but you could try removing the cover and reboot the iPad and see how that goes.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Finder doesn't stop opening and closing!

Help!
I was playing Sims 2 (an addiction) a few minutes ago, and I took some video captures. When I tried opening and viewing them on Quicktime, OS X started acting up. Finder won't stop opening and closing now, it opens and closes almost instantly. It all started happening when I tried opening Quicktime. I tried searching Apple.com, and the web for answers and I haven't had any luck. My system's specs are:
Mac Mini 1.42Ghz
1GB of RAM (recently installed)
Mac OS X Tiger 10.4.7
At the time the problem occured, I was running AIM, Sims 2, and Quicktime. This has never happened before. I tried Shutting Down and coming back again but it kept doing it. I removed the Sims 2 CD and shut down and after awhile turned it back on, still on going. Right now the computer went into Screen Saver mode and I can see the cursor blinking in and out...
Please help this is really frustrating...
Mac Mini 1.42Ghz Mac OS X (10.4.7) 1GB Ram

See if you can boot up in safe mode. To do so, restart and hold down the shift key until it boots. It will take longer to boot because it will be running a file system check while booting so be patient.
If that helps try rebooting again the normal way.
If the problem comes back when you boot the normal way then reboot in to safe mode again and then try deleting the finder preferences file. Instructions on how to do this are available here:
http://www.thexlab.com/faqs/finder.html
I would then do some basic maintenance on your Mac as outlined in the following FAQ, just to be on the safe side.
http://www.thexlab.com/faqs/maintainingmacosx.html

I was in full screen mode and now that I have exited, the main toolbar for Safari is gone. So please don't say go to View. Each time I click off of safari to the desktop, it shows me the Finder Toolbar. I have opened and closed Safari many many times.

I was in full screen mode and now that I have exited, the main toolbar for Safari is gone. So please don't say go to View. Each time I click off of safari to the desktop, it shows me the Finder Toolbar. I have opened and closed Safari many many times.

No no, if you read what I said, it would be that each individual display would be customizable to the user. The way you have it, it sounds like your second display will be dedicated to scrolling through fullscreen apps not allowing you to do it on the home screen. This is silly because with my concept, you could do that, by dragging apps to fullscreen in your second display, but if you want you could tell another display to scroll through fullscreen apps (independently) if you wanted. Each display will have it's own mission control with it's own set of desktops. I also can see how some people would still want them linked together, so this could just be a little check box made in mission control prefs to "link" or "unlink" desktops with link checked by default.
With your solution you're limited to your setup. but what if the person has three or four displays? Well then your solution would limit them to one dedicated display that scrolls through fullscreen apps where mine lets a person customize their desktops depending on their preference and setup.
further example: if you have safari, address book and mail in one display, you could still have ichat, PS and Illustrator in your second, and a text editor, FTP Client and iTunes in your third. Then you would mix and match these apps but it would promote the use of mulitple displays as well as benefit people with three or more, which thunderbolt, Cinema Display and Pro computers support.

Open and closed invoices

hi experts,
I have to capture the parked, open and closed invoices in a report in reference to vendor...
I got the parked invoice condition from the table BSTAT either v or w.
But i am not getting the idea how to capture the open and closed invoices...
Some one suggested me to use the ITEMSET structure but i donno how to capture those values can anyone suggest me how to do it...?
SIRI

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR <b>BSTAT</b>
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
    WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
    CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
                               AND      BUKRS = T_BKPF-BUKRS
                               AND      GJAHR = T_BKPF-GJAHR
                               AND      AUGBL <> ' '.
    EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
    WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
    WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

Service Requests Open 5 days?/Service Requests Open and Closed Today

Help!
How would I determine service requests open greater then 5 days, I use the # of Open SR's but cannot seem to get a date to work.
Also what is the best way to count the SR's open and closed on the same day?
Thanks in advance.

You need to include a TIMESTAMPDIFF function in your filter... something to the effect of
TIMESTAMPDIFF(SQL_TSI_DAY,"Service Request"."Create Date",CURRENT_DATE) > 5
Double check the column reference.
Mike L

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

COPA reporting with open and closed projects

Dear All,
I am designing a COPA solution for an infrastructure providing company using project systems and posting to/settling out of projects on a monthly basis. Projects run for long periods and continually incurr costs and earn revenue untill they are closed. The requirement is to report by common characteristics (say customer group) and separately for open and closed projects. My issue is how to separate the line items of projects where status changed to closed (having posted with the status REL previously), from the open ones, without entering the projects individually in the selections screen.
Any ideas will be greatly appreciated.
Thanks,
Maddy

Dear Satya,
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee0bbd55c811d189900000e8322d00/content.htm
An item of a purchase requisition is only regarded as Closed if the requested order quantity has been included in a purchase order.
You can also set an item to Closed manually. <b>This item will then not be taken into account by the materials planning and control system.</b>
You can set the Closed indicator manually at the following points (it can later be cancelled if necessary):
When changing a purchase requisition, on the item detail screen
When creating a purchase order referencing a requisition, on the item detail screen of the PO
You can still create purchase orders by referencing a requisition if this indicator has been set in the requisition concerned.
The indicator can also be set in the case of automatic PO generation from purchase requisitions. On the initial screen of the requisition, you can specify that the requisition is to count as closed as soon as an associated purchase order has been generated, even if the complete quantity requested has not been ordered, for example (Set reqs. to "closed" indicator).
Analyses of Purchase Requisitions:
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm (visit section under Reporting in Purchasing)
Hope this will help.
Regards,
Naveen.

How to remove sound notification opening and closing foxfire

Similar Messages

Maybe you are looking for