How to Restore Data.

Hi
I have truncated all the data of my all the tables accidentally. I Have rman backup of previous day. And the deletion occurred at 9:15am. I want to go back at 9:10 am. My database is in archive mode.
How can I restore data until 9.10 am ? Any body explains me the rman command..
Arif .

Set the NLS parameters at shell prompt:
NLS_LANG=american; export NLS_LANG
NLS_DATE_FORMAT='Mon DD YYYY HH24:MI:SS'; export NLS_DATE_FORMAT
At rman prompt do the following:
(Change the channel to disk if restoring from disk media instead of tapes)
connect target /               -- Connection to the target database
connect rcvcat rman/rman@rcat          -- Connection to the recovery catalog database
shutdown immediate;               -- Shutdown the target database for point-in-time recovery
startup mount;                    -- Mount the target database
run
set until time 'Dec 20 2004 9:10:00';     -- Set the time to which the database should be recovered
allocate channel ch1 type 'sbt_tape';     -- Allocate channels
restore database;               -- Restore the database from backup
recover database;               -- Recover the database by applying archivelogs
release channel ch1;               -- Release channels
alter database open resetlogs ;          -- Open the database with resetlogs after successful                          recovery.

Similar Messages

How to restore data from my Time Capsule onto my new hard drive

My Macbook's hard drive had to be changed, and I'm trying to restore files from my Time Capsule onto my new hard drive, but all I see are three sparsebundle files (one for each Mac we have at home, including my computer/old hard drive). From that point I don't know what else to do. If I click on it, it opens a dialogue that says "opening volumes" and it stays on that for a while.
Does anyone know how to restore data backed up in my Time Machine from previous backups onto a new hard drive? Does it have to do with these sparsebundle files? Or, is there another way?

Hello Alexevich. Welcome to the Apple Discussions!
Does anyone know how to restore data backed up in my Time Machine from previous backups onto a new hard drive?
Check out the following Apple article: Restoring files from a Time Capsule backup

HT1766 how to restore data file from back up on iPhone 5 docs to go

how to restore data file from back up on iPhone 5 docs to go

If it backed up the lock file, then Lightroom was open when Time Machine ran, and the backup therefore may be corrupted. You could try restoring that backup (without overwriting your week ago version) and see if it'll open. If it does, you're off and running. What methods have you tried?

How to restore Data from past iCloud backup? I lost my spreadsheets from Numbers, need help.

How to restore Data from past iCloud backup?
Is there a way where i can retrieve my spreadsheets from the past iCloud backup of numbers?

Your Numbers documents were synced with iCloud so they would be stored on the server rather than being included in the backup. If you were signed into your iCloud account on a Mac that you were backing up with Time Machine, you could restore them from your Time Machine backup.

How to restore data from iCloud

How to restore data to the replacement iPhone 4S from iCloud backup? New iPhone is version of iOS 7.03 but alll backups are in version iOS 7.1.1

You'll need to update your phone first to 7.1.1, then you'll be able to do a full restore from your backup.

How to Restore datas in Oracle 10g using hot backup?

I did Hot backup things (On-line backup) in Oracle 10g (Windows environment)
Now backup files are stored in physical location..
How to restore the datas to original location..
Can any one give the url or command for recovery in ora 10g for hot backup
Thanks

Please do not dump all of your work in this forum, and expect volunteers to do it for free!!!
Dear Great Senior DBA Sybrand Bakker
What are Oracle Discussion Forums?
Oracle Discussion Forums is an interactive community for sharing information, questions, and comments about Oracle products and related technologies. Most forums are moderated by product managers, and all of them are frequently visited by knowledgeable users from the community
oracle forums is not your place for showing “bossing” it is a place where junior to seniors share there knowledge and advices, it means helping and sharing….. Knowledge is for giving ….giving only it will increase… don’t discourage any one like this ……
There are my Great Seniors (not like u) mainly respected Mr. Jonathan Lewis, Mr. Don Burleson and a lot of oracle nominated ACE members are all giving patiently replay to jr. to sr.
Obeasley oracle doubts are mostly related to practical issue only……
Pls try to learn the word meaning of “volunteers”

How to restore data on iPhone 5c from iPhone 5

Hello everybody,
I need help to restore data from iCloud on an unused iPhone 5c with iOS older than on my stolen iPhone 5.
I must be possible, but how?
thanks

Read -> How can I restore data from my iCloud account on a new iPhone 5c with a previous SW version that my old (stolen) iPhone 5?

How to restore data files from a purchased app that isn't working

I recently had to reset my iPad after an ios7 problem with hyperlinks. The reset fixed the hyperlink problem but now I can't open excel or word files created in a purchased application, productivity suite. When I click on the file, it starts to open then switches back to the app icon. Tried deleting and reinstalling the app and now all the files are gone from my iPad. I backed up my iPad to my desktop before deleting the app but can't figure out how to restore just the files I need.

You should be able to mount the partition once you've loaded up the live CD. Just figure out which one it is by using
fdisk -l
then mount it to /mnt or wherever you want it.
As for moving/saving them, I'm not entirely sure how to get them onto an external server. You might have to mount another partition in order to install any apps that you need to connect to an external server, but wait for someone who really knows to answer before you try it. If you're only talking about 4 or 5 MB, I would just mount a USB stick and dump them on there.
Last edited by Xyne (2008-09-28 03:38:02)

If migrations fails, how to restore data

Hello,
if migration fails at image applying step, we can use another TS to install OS only and loadstate.exe to restore data from SMP, I tried it and it works. But if we use hardlinks, after fail I need to run TS to build OS only and it overwrites folder C:\_SMSTaskSequence\
where UserState folder is stored, and I am not able to restore data. What I can do in this situation?

Hi,
First I recommend you check the log file SMSTS.LOG.
Also as Peter mentioned, you could use loadstate via the command line to restore the data.
For more infomation, please review the links below:
LoadState Syntax
http://technet.microsoft.com/en-us/library/dd560804(v=ws.10).aspx
Hard-Link Migration Store
http://technet.microsoft.com/en-us/library/dd560753(v=WS.10).aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to Restore Data Deleted from Time Capsule Hard Drive

This question is more about the time capsule in general as opposed to a specific time machine issue.
I'm using my time capsule as an external hard drive that I can access wirelessly and I have accidentally deleted a folder. It didn't go into the trash can on the computer I used to delete the file from my TC, it just disappeared. I have data recovery software (Data Rescue III) but it is unable to locate the TC since it is not a plugged in device. I've tried connecting my computer to the TC via wireless, ethernet, and usb but Data Rescue still won't detect the TC.
How can I get the files back? Is there a way to restore files deleted from the TC when it's being used as a hard drive (not as a time machine for backups)?
THANKS!!!
Message was edited by: jenniex
Message was edited by: jenniex

There is only one USB port on the back of the Time Capsule, and AFAICT from reading Apple's documentation, the only uses for that port are to connect an external hard drive or printer. You could try connecting that port to your Mac directly via USB cable, but nothing I can find indicates it would work, and you would be solely responsible if it somehow damaged either device (which may or may not even be a possible side effect).
Unfortunately, if connecting the Mac to the Time Capsule via USB does not work, you're probably out of luck. Unless you are willing to crack open the Time Capsule, remove the hard drive and put it in an external enclosure so you can access it with Data Rescue, your data will remain lost. Note for the future that you absolutely *should not ever* keep original, un-backed-up data on a backup drive. It's poor organization and dangerous to boot.

How to restore data on new iphone without using the initial setup

I bought a new iphone 5s today but the guy in the shop skipped the initial setup to activate the sim meaning I didn't get to restore the data through iCloud from my old phone as the wifi in the shop wasn't working. I have now got home to a wifi connection and have signed into my iCloud account but how do I restore my data? Or how do I get back to the initial setup?

On your phone: Settings>General>Reset>Erase All Content & Settings. You can now restore your previous phone's backup to your new phone.

How to restore data from time capsul

How can you restore your data from Apple Time Capsule?
Would it be an idea to share your back up with others? And can it be done?

Read Q14-17 here.
Q18 covers copying backups to other locations.
http://pondini.org/TM/FAQ.html
If you want a secondary backup use another tool. A direct disk image from superduper is free to do.. and works much better to do a restore of the computer.

How to restore DATA pane in debugger?

Hi All!
Yesterday i debuged my procedure and accidentally close Data pane. How can i restore it? I know that i can delete folder from c:\Documents and Settings\<user_name>\Application Data\SQL Developer , but this way compel me to tune another preferences in developer what i would not like to do.
P.S. I use Version 3.0.04 Build MAIN-04.34
Thanks.
Edited by: 858709 on 13.05.2011 1:46

From the menu bar try
View -> Debugger -> Data

How to restore data stored on icloud

Hi - I have around 13gb of data stored on iCloud (i can see this when I click on manage storage).I wish to use iCloud to retrieve this data when setting up my IPad. However, when I set up the ipad and use a backed version in the icloud, I am not able to retrieve all 13gb of data. So, my question is how to use the iCloud to retrieve all this data on my IPad.
Many thanks,
James.

hi grant. thank you.
i think i am one giant step away from completing all of this. of course at the moment i am recalling your "you are trying to do too much at one time" caution. the lowdown here is that my IT guy just left for a cross country trip and is not available and i am in the weeds big time. can you help me with something?
i am in Lion and I seem to be seeing TWO user accounts named after my SHORT NAME (say this is "Mac's Mac Short Name") for my Snow Leopard install. One has the ICON for my Snow Leopard Install and the other has a default ICON.
in the USERS folder i am seeing one folder with the HOME FOLDER ICON that has the same name as my Snow Leopard Home Folder and I see one folder that has the same name as the SHORT NAME listed above. So this folder says "Mac's mac Short Name" and it has folders in it with red circles and negative symbols showing it is not accessible (these are Desktop, Documents, Downloads, Movies, Music, and Pictures).
Since I migrated my DESKTOP (long story but i have a lot of data on here and i wanted it in Lion so I could organize it before moving some of the work that was finished to the raid volume where my DOCUMENTS folder is located) - I can tell that I /think/ that the SHORT NAME with the Snow Leopard icon is the correct user but when i try and delete the User Acount with the same short name but a default icon is says that there is 194.1 GB of data in here!
So i am confused to the point where it seems OK to copy my home folder in Snow Leopard to the Data Drive but it seems unwise at the moment to point my new Lion install there because I am so confused as to what i have for user accounts.
Did any of that make sense enough to solve? I hate to think i am out for two weeks over here.
- jon

Hard drive crash - How to restore data from my iPod?

Hi there,
I had to replace the hard disk and in my daughter's PC and now need to get the songs back from her iTouch to her computer. As you can imagine, I had no backup prior to this hard drive crash... Now how can I get the songs and applications from the iTouch back in the PC? I have authorized iTunes using the same account but it does not allow me to do any tranfer from the Itouch to the PC.
Please help... I don;t want to loose everything we have purchase and installed on the iTouch...
Thanks,
Christian Dubuc

That post of mine linked to above is quite an old one and isn't meant to specifically address an iPod Touch. You might want this more up to date information.
If your iPod is set to sync automatically you need to take care connecting to an empty iTunes. You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes installed hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes - Keyboard Shortcuts for Windows
Alternatively open iTunes first and go to Edit>Preferences>Devices and check the box "Disable automatic syncing for iPhones and iPods" and choose Ok. Then connect your iPod.
If at any point you get a message that your iPod is linked to another library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
iTunes will only let you copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
Purchased applications can be downloaded over again, see this article for details: How to redownload purchased applications from the App Store
For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod Touch or iPhone. You'll find that they have varying degrees of functionality and some will transfer data (such as playcounts and ratings), movies, videos, photos, podcasts and games as well.
A selection of iPod/iPhone to iTunes utilities:
Senuti Mac Only (iPod Touch & iPhone compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
TuneJack Windows Only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)

How to Restore Data.

Similar Messages

Maybe you are looking for