How to restrict the columns order movement at runtime in 7.3

Hi Experts
We are using EP7.3 Portal.
We have modified the Cats table in a customized ESS Cats DC . We have added a another table
say subTotals table (This table does not have header) to calculate the hours as per business requiremnt just below the cats table with proper allignment.
Now at run time i.e when launched through Iview in the portal, the user can able to
personalize the columns order of Cats Table (Moving columns from one place to other) by Right click on the
table>User settings->other-->Re Arrange the columns
We have 2 tables so moving the first table column order will effect the second table which displays the totals (This is readonly)
Our requirement is we should not allow the user to change the column order at run time (At least we need to restrict 8 columns outof 13 to 14 columns)
How can we restrict the columns order through code i.e by controlling the property if any
Regards
KALYAN

nwa->configuration management->infrastructure --->application modules
filter the name column with "tcwddispwda"
select the entry(should be only one after filter)
select the "web dynpro properties" tab
select the "default" in the table
AllowUserPersonalization----->false

Similar Messages

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to change the column order in the DB?

Hi all,
For example,
     there is an employee database with the field names empno(1),empname(2), empphone(3), empaddress(4), empsal(5). the values in the brackets are the column order i.e., the order in which the column names are placed.
     I have the details of the employee records in a .txt file and i have to upload the file with the same column order with some delimiter. I done it but in future if any one have the details of the employee details with some other column order i.e., empaddress(1), empsal(5), empno(3), empname(4), empphone(5)
     how i can change the column order of the database ...
Thanx in advance...
Bye,

how i can change the column order of the databaseYou don't. You specify the column order in you're insert.
PreparedStatement pstmt = conn.prepareStatement ("insert into EMP (EMPNO, ENAME) values (?, ?)");
pstmt.setInt (1, 1500);
pstmt.setString (2, "A Name");
pstmt.execute ();
Steve.

How to restrict the total order size to 10 in atg CRS store

Hi,
i want to restrict customer from selecting orders not more than 10 either the same product or different one. i got the solution for same product but the problem is when i am trying to restrict the customer from selecting items more than 10 by changing some code in StoreCartFormHandler.java . i cant able to get that....... and i'll also explain what are all the changes which i have made in that like putting condition for overallQuantity attribute it was not effecting the code. can anybody please tell me what else i've to do...

Thanks for the reply,
Mr.Rsharma and karthik you both said that orderHolder oh=getcurrent(); but that getcurrent() method was not there in that. when i am trying to write that it was showing getCurrentTransaction(). and also i want to know from you guys that i need to make changes to preaddItemsToOrder() or addItemsToOrder(). i am editing the preaddItemsToOrder() And as i am new to ATG i dont clearly know what are all the methods like OrderHolder or commerceItems.and i want to restrict the user from selecting items of same type or different type that overallitems should not exceed 10.
i am pasting my code over here.which i have written from your references.
OrderHolder shoppingCart = (OrderHolder) this.resolveName(SHOPPING_CART, false);
     Order order = shoppingCart.getCurrent();
     List info=order.getCommerceItems();
     if(info!=null)
     for(Object ob:info){
               Nquantity +=getQuantity(((CommerceItem)ob).getId(), pRequest, pResponse);
     System.out.println("the new quantity is"+Nquantity);
sorry if i am not clear.
Edited by: Ravikishore on Nov 28, 2012 4:46 AM
Edited by: Ravikishore on Nov 28, 2012 4:50 AM

How to change the column order in OVS - NOT USING Enhancement Pack 1

Hi Guys,
we are currently using NWDS 7.1.
I cannot seem to chang the order of the columns when the OVS pops up. We have tried to change the order of the fileds of the custom SAP BAPI that is used for this OVS but no success.
Please advise on possible changes of the actual BAPI that might help, or things we can do Java side.
Kind Regards,
Christiaan

Hi Christiaan,
This can be done from Java side in itself.
This depends on the order in which you add attributes to the node in the context for ovs output.Recreate the context node of ovs output and add attributes one after the other in the same order you want it to appear in the ovs pop - up.That simple.
Hope this helps.
Regards,
Ashok

How to restrict the change access in CRM for OLTP orders

Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel

Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.

How to restrict the GR for Production Order when Goods Issue is not done

Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.

Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva

How to restrict the user from making any changes in Sales order- item level

Hi to all
How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
Regards
Anish Parikh
Edited by: anish parikh on Jan 24, 2008 5:16 AM

Hi Anish,
This can be achieved through the roles and authorization.
This can be done through the basis team. they can create user profiles and roles.
For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
Like that ur requirement can be done.
Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
Hope i answers.
Reward points if useful.
Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM

How to restrict the the oreder reason list while creating sales order

Hi gurus,
Can anyone suggest me
how to restrict the Order rerson list
while creating the sales order in VA01
Thanks & Regards
kalyan.

hi,
Try this exit:
Enhancement MMFAB001 User exit for generation of release order
Thanks,
AMS

How to restrict the entry of same material twice on the order

HI,
How to restrict the entry of same material twice on the order before saving the Order ?
I do not want my users to enter the same material as two different line items in the order.
Any inputs wud b appreciated

Hi Vam,
For this you need to take the help of an ABAPer . Ask him to modify the user exit and add the logic.
For user exit please go through the below link it will help you to resolve your issue.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Regards,
Krishna O
Edited by: Krishna O on Jun 3, 2010 12:29 PM

How to get and set the column order in SharePoint list forms

Hi,
I want to read the column order of the SharePoint list forms in SharePoint 2003 sites using any of the available web services and need to set the same order
in the newly created list in SharePoint 2010.
I am able to read the fields from SharePoint 2003 and creating the list with same fields in SharePoint 2010, but the column order is not maintaining in
list forms.
Also, I need to created the views from 2003 site to 2010 site.
Please help me...
Thanks in advance...

Hi,
Please try to use the following code to programatically change the order.
SPList list = web.Lists["Example List"];
if (list.ContentTypes.Count > 0)
SPContentType ct = list.ContentTypes[0];
string[] names = {"Example_x0020_One", "Example_x0020_Two", "Example_x0020_Three"};
ct.FieldLinks.Reorder(names);
ct.Update();
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/ce66fd65-2882-4bda-8142-89e116d8b90f/how-to-set-the-order-of-the-fields-in-list-forms?forum=sharepointdevelopmentprevious
Best Regards
Dennis Guo
TechNet Community Support

How to restrict the duplicate values in lov column of VO based Adv Table

Hi Gurus,
I want to restrict the duplicate values at lov which is a colunm in an Adv Table.
If user enters duplicate values then first it should show an error msg that Duplicate values have been entered.
After the duplicate values have been removed, then the user can save all the values in the table.
My Adv Table is based on a VO.
The link how to restrict the duplicate values at form level
talks about Adv Table based on a EoVO, which doesnot work in my case.
My Approach,
I am iterating through RowSetIterator and committing through PROCEDURE.
I am able to avoid duplicate entry through a function checkRespId. (given below)
Below code is for iterating and committing.
public void saveline(String reqid,String userid)
System.out.println("RequestId/saveline"+reqid);
System.out.println("UserId/saveline"+userid);
OAViewObject vo = (OAViewObject)getRespLineVO1();
RespLineVORowImpl row = null;
int fetchedRowCount = vo.getFetchedRowCount();
RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedRowCount);
for (int i = 0; i < fetchedRowCount; i++)
System.out.println("Inside the for LOOP");
row = (RespLineVORowImpl)deleteIter.getRowAtRangeIndex(i);
String respoidid = row.getAttribute("ResponsibilityId")+"";
String respname = row.getAttribute("ResponsibilityName")+"";
String stdate = row.getAttribute("StartDate")+"";
String enddate = row.getAttribute("EndDate")+"";
String linestatus ="A";
if(userid!=null)
if(!(respoidid.equals("null")) && respoidid!=null)
String checkingrespid=null;
checkingrespid = checkRespId(userid,respoidid);+contains no if not duplicate and yes if its duplicate+
System.out.println("checkingrespid for Resp with ID :"+respoidid+"exists or not "+checkingrespid);
if(checkingrespid.equals("No"))
String message, result = null;
Connection txn = getOADBTransaction().getJdbcConnection();
try
calling PROC ...
catch(Exception e)
message = "Error in Inserting into line" + e;
throw new OAException(message, OAException.ERROR);
else
throw new OAException("You have entered duplicate no. of values", OAException.ERROR);
else
System.out.println("respoidid is null");
break;
deleteIter.closeRowSetIterator();
public String checkRespId(String userid,String respoidid)
String createRow="No";
OAViewObject vo = (OAViewObject)findViewObject("CheckRespVO1");
if (vo != null)
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, userid);
vo.setWhereClauseParam(1, respoidid);
vo.executeQuery();
System.out.println("ROW COUNT IS "+vo.getRowCount());
if(vo.getRowCount()>0)
createRow="Yes";
else
createRow="No";
return createRow;
Problem:
I remove the duplicate entries and click on save and get this error.
Unable to perform transaction on the record. \nCause: The record contains stale data. The record has been modified by another user.
\nAction: Cancel the transaction and re-query the record to get the new data.
Thanks,
Sombit

Hi Anil,
I am trying out your code but stuck in inserting the rows
using your code in URL: http://oracleanil.blogspot.com/2010/09/oaf-passing-table-type-object-to-oracle.html
I am always getting the same exception i.e COde blast in when I run.
My modified code is:
String[] as = null;
Number[] vNumber = null;
Number[] vNumberrespid = null;
Number reqidnumber = null;
reqidnumber = new Number(Integer.parseInt(reqid));
Connection txn = getOADBTransaction().getJdbcConnection();
String mCreateSearchRequestStatement = null;
OAViewObject vo = (OAViewObject)findViewObject("RespLineVO1");
int j = vo.getFetchedRowCount();
try
System.out.println("abouce try");
vo.reset();
if (vo.getFetchedRowCount() > 0)
System.out.println(String.valueOf("Fetched row count ").concat(String.valueOf(vo.getFetchedRowCount())));
int i = 0;
as = new String[j];
vNumber = new Number[j];
vNumberrespid = new Number[j];
while (vo.hasNext())
vo.next();
System.out.println(String.valueOf("Inisde the do while loop").concat(String.valueOf(i)));
vNumber[i] = (reqidnumber);
vNumberrespid = ((Number)vo.getCurrentRow().getAttribute("ResponsibilityId"));
as[i] = String.valueOf(vo.getCurrentRow().getAttribute("ResponsibilityName")).concat(String.valueOf(""));
System.out.println("Request ID "+reqidnumber[i]);//getting null even there is some value selected
System.out.println("ResponsibilityId "+vNumberrespid[i]);//getting null even there is some value selected
System.out.println("Resp Name "+as[i] );//getting null even there is some value selected
i++;
CallableStatement cs = txn.prepareCall("{call XX_PassTableType.XX_PassTableType_prc(:1, :2,:3)}");
ARRAY array = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumber);
ARRAY arraynew = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumberrespid);
ARRAY array1 = new ARRAY(new ArrayDescriptor("APPS.JTF_VARCHAR2_TABLE_100", txn), txn, as);
cs.setArray(1, array);
cs.setArray(2, arraynew);
cs.setArray(3, array1);
cs.registerOutParameter(3, 2003, "JTF_VARCHAR2_TABLE_100");
cs.execute();
ARRAY error = null;
error = (ARRAY)cs.getArray(2);
if ((error != null) && (error.length() > 0))
System.out.println(String.valueOf("Error is ").concat(String.valueOf(error.getArray())));
String[] retError = new String[j];
retError = (String[])error.getArray();
System.out.println(String.valueOf("Error in saving data").concat(String.valueOf(retError[0])));
cs.close();
catch (Exception exception)
throw new OAException("code blast", OAException.ERROR);
Thanks,
Sombit

How can i give a parameter to user to select the column order in runtime

Select * from emp ;
in parameter form for i need to create a parameter so the user can select whatever the column order he required.
where is should write the order by clause

Hi,
In Reports Use Lexical Parameter instead of Bind Parameter and write order by in After Param Form...
Here you find more details...
https://forums.oracle.com/thread/669325
Hope this will solve your issue..
Regards,
Soofi

How to restrict the decimal entry on dynamic table in adf 11 .6

Hi All,
JDev version 11.6
I have a usecase based on dynamic VO. How to restrict the decimal numbers on table columns . When user enter the decimal number .I have to show error message.
In order to achieve above requirement .I have added value change listener on table column .its not working as expected
<af:table rows="#{bindings.EmployeeDynamicVO.rangeSize}"
                  fetchSize="#{bindings.EmployeeDynamicVO.rangeSize}"
                  emptyText="#{bindings.EmployeeDynamicVO.viewable ? 'No data to display.' : 'Access Denied.'}"
                  var="row" rowBandingInterval="0"
                  value="#{bindings.EmployeeDynamicVO.collectionModel}"
                  selectedRowKeys="#{bindings.EmployeeDynamicVO.collectionModel.selectedRow}"
                  selectionListener="#{bindings.EmployeeDynamicVO.collectionModel.makeCurrent}"
                  rowSelection="single" id="t1"
                  styleClass="AFStretchWidth" autoHeightRows="-1"
                  columnStretching="last" contentDelivery="immediate" >
          <af:forEach items="#{bindings.EmployeeDynamicVO.attributeDefs}"
                      var="def">
            <af:column headerText="#{bindings.EmployeeDynamicVO.labels[def.name]}"
                       sortProperty="#{def.name}" id="c1">
              <af:inputText value="#{row[def.name]}" id="ot1"
                            valueChangeListener="#{backingBeanScope.EmployeeBean.validateINputs}"
                            autoSubmit="true">
                </af:inputText>
              <af:outputText value="#{row[def.name]}" id="ot6"
                             visible="#{def.name eq 'Dummy'}"/>
            </af:column>
          </af:forEach>
        </af:table>
So appriciate if any alternatives on above usecase. Thanks in advance

HI
Expected :as soon as user enter the decimal values in table column , it should throw the error message in new small new window
Getting the value change listener and validating , but its working only tab out (Because VO is dynamic )
please suggest us any reg expression and Validators to achieve the above scenario ?

How to restrict the department to not user other departments' equipment?

Dear SAPIENTS,
How to restrict the department to not user other departments' equipment? If suppose any one creating order for equipment having different authorization group then system should not allow me to do this.
Regards,
Kaushal Rai

Kaushal Rai,
Use Authorization group for technical objects, create authorization gruops in IMG and assign the same to the Equipment master and block the other department with the same authorization group. For ristricting the authorization group to other departments after creating and assigning it to the equipment seek help from your BASIS team.
goto the below path for cerating the Authorization group:
IMG - PMCS - Master data in PMCS - Technical Objects - Define Authorization groups:
Here you define the authorization groups, after completion of this step go to the Equipment master in General Data tab page there is a feild Authourization Group, mention the respective authorization group and provide this Authorization gruop value to the respective user in the user role with the help of BASIS Team.
Regards,
Praveen.

How to restrict the columns order movement at runtime in 7.3

Similar Messages

Maybe you are looking for