How to restrict the no of rows to be displayes in ALV in webdynpro

Hi All,
Can any one suggest how to restrict the no of records to be displayed in the portal in the ALV through webdynpro ABAP.
Thanks & Regards,
Sreelatha Gullapalli.

HI,
If you want to change the Source (Design time) then you can do that via the alv configuration.
Something like this in the component SALV_WD_COLUMNS_UI
lr_available_model->if_salv_wd_table_settings~set_visible_row_count( lc_row_count ).

Similar Messages

  • How to increase the number of rows to be displayed in BEx Web Analyzer

    hi,
    I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows  of data at a time. How to increase the number of rows? do i need to any kind of settings?
    pls reply.

    Hi,
    I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
    <bi:BLOCK_COLUMNS_SIZE value="4" />
    <bi:BLOCK_ROWS_SIZE value="17" />
    Then just save, and ignore the error messages.
    Message was edited by:
            vind Reinsberg

  • How to determine the number of rows to be displayed in a report

    hello experts,
    Has anyone ever come across this requirement before? Before a report finishes being executed and before it displays the results, is there a way to determine the number of rows to be displayed as the result?
    Many thanks in advance.
    Regards,
    Inma

    Hello Arun,
    Thanks for your reply but do you know which method I should use for this purpose if I use the table interface?
    Thanks,
    Inma

  • How to restricting the no. of rows to be inserted

    How can you restrict the insertion of data in a table up to 1000 no. of rows and throw an error if something row is trying to get inserted. Is it through a trigger, if so how can you do that?
    Regards,
    Rajesh Gurram

    But, with some compromise in the table structure you can do it in this way -
    SQL> set lin 10
    SQL>
    SQL> desc tab_res;
    Name              Null?    Type
    EMPNO                      NUMBER(4)
    ENAME                      VARCHAR2(30)
    JOB                        VARCHAR2(9)
    SQL>
    SQL>
    SQL>
    SQL>
    SQL>
    SQL> set lin 100
    SQL>
    SQL> alter table tab_res add(seqno   number(1),
      2                          constraints ck_tab_res check(seqno<5));
    Table altered.
    SQL>
    SQL>
    SQL> desc tab_res;
    Name                                                  Null?    Type
    EMPNO                                                          NUMBER(4)
    ENAME                                                          VARCHAR2(30)
    JOB                                                            VARCHAR2(9)
    SEQNO                                                          NUMBER(1)
    SQL>
    SQL>
    SQL> create sequence tab_res_s
      2  start with 1
      3  increment by 1;
    Sequence created.
    SQL>
    SQL> insert into tab_res
      2    with t
      3    as
      4      (
      5             select 8530 empno,'Billy' ename,'SW' job from dual
      6             union all
      7             select 8531,'Cd','SW' from dual
      8             union all
      9             select 8532,'Blueshadow','SW' from dual
    10             union all
    11             select 8533,'Justin','SW' from dual
    12          )
    13     select empno,ename,job,tab_res_s.nextval seqno from t;
    4 rows created.
    SQL> commit;
    Commit complete.
    SQL>
    SQL>
    SQL> select * from tab_res;
         EMPNO ENAME                          JOB            SEQNO
          8530 Billy                          SW                 1
          8531 Cd                             SW                 2
          8532 Blueshadow                     SW                 3
          8533 Justin                         SW                 4
    SQL>
    SQL> insert into tab_res values(8534,'Williams','SW',tab_res_s.nextval);
    insert into tab_res values(8534,'Williams','SW',tab_res_s.nextval)
    ERROR at line 1:
    ORA-02290: check constraint (SCOTT.CK_TAB_RES) violatedN.B.: Personally i don't think this is feasible for some specific circumstances. I mean may be the project environment restrict you to change the table structure for a specific reason.
    Regards.
    Satyaki De.

  • Smartforms table: how to fix the number of rows to be display in the table.

    Hello.
    I´m having problems with a smartform. I have defined a window with 7 cm high. Then I have define a table to print the content of a table.
    I'm using the header, the main area, and the footer. It seems to be ok. But the main area is sizeble. I mean, that if in the table has 2 records, it dispaly the 2 records and inmediatly display the footer. It probably use only 3 cm of the 7 cm defined for the high of the window.
    And I want that the footer of the table would be display at the end of the 7 cm of the window. Is that posible ?
    Please, tomorrow we will have our kick off the module and this is the last issue we have.
    Thanks in advance for your help.

    Better idea wud be to create a WINDOW, just Below you Main window (After table) ..
    In Form Layout (Form Painter) you can fix this Window on any place , Pass the FOOTER text node over there  .. So you will get a Static FOOTER diplay ..
    That what you need ?? Let me know
    Edited by: Lokesh Tarey on Jul 22, 2010 7:15 AM

  • How to Restrict the Rows In Pivot Table

    Hi All,
    how to Restrict the Row in the Pivot table.
    My Requirement is like this.
    i have to show the top 10 values in the pivot table but My report is show all the values.
    how can we achieve this.
    any quick solution for this appreciated.
    Thanks,
    Yogi.

    Yogi1729 wrote:
    Hi All,
    how to Restrict the Row in the Pivot table.
    My Requirement is like this.
    i have to show the top 10 values in the pivot table but My report is show all the values.
    how can we achieve this.
    any quick solution for this appreciated.
    Thanks,
    Yogi.You can't really restrict the rows in a pivot table, but you can do this:
    http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/

  • How to restrict the duplicate values in lov column of VO based Adv Table

    Hi Gurus,
    I want to restrict the duplicate values at lov which is a colunm in an Adv Table.
    If user enters duplicate values then first it should show an error msg that Duplicate values have been entered.
    After the duplicate values have been removed, then the user can save all the values in the table.
    My Adv Table is based on a VO.
    The link how to restrict the duplicate values at form level
    talks about Adv Table based on a EoVO, which doesnot work in my case.
    My Approach,
    I am iterating through RowSetIterator and committing through PROCEDURE.
    I am able to avoid duplicate entry through a function checkRespId. (given below)
    Below code is for iterating and committing.
    public void saveline(String reqid,String userid)
    System.out.println("RequestId/saveline"+reqid);
    System.out.println("UserId/saveline"+userid);
    OAViewObject vo = (OAViewObject)getRespLineVO1();
    RespLineVORowImpl row = null;
    int fetchedRowCount = vo.getFetchedRowCount();
    RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
    if (fetchedRowCount > 0)
    deleteIter.setRangeStart(0);
    deleteIter.setRangeSize(fetchedRowCount);
    for (int i = 0; i < fetchedRowCount; i++)
    System.out.println("Inside the for LOOP");
    row = (RespLineVORowImpl)deleteIter.getRowAtRangeIndex(i);
    String respoidid = row.getAttribute("ResponsibilityId")+"";
    String respname = row.getAttribute("ResponsibilityName")+"";
    String stdate = row.getAttribute("StartDate")+"";
    String enddate = row.getAttribute("EndDate")+"";
    String linestatus ="A";
    if(userid!=null)
    if(!(respoidid.equals("null")) && respoidid!=null)
    String checkingrespid=null;
    checkingrespid = checkRespId(userid,respoidid);+contains no if not duplicate and yes if its duplicate+
    System.out.println("checkingrespid for Resp with ID :"+respoidid+"exists or not "+checkingrespid);
    if(checkingrespid.equals("No"))
         String message, result = null;
    Connection txn = getOADBTransaction().getJdbcConnection();
    try
    calling PROC ...
    catch(Exception e)
    message = "Error in Inserting into line" + e;
    throw new OAException(message, OAException.ERROR);
    else
    throw new OAException("You have entered duplicate no. of values", OAException.ERROR);
    else
    System.out.println("respoidid is null");
    break;
    deleteIter.closeRowSetIterator();
    public String checkRespId(String userid,String respoidid)
    String createRow="No";
    OAViewObject vo = (OAViewObject)findViewObject("CheckRespVO1");
    if (vo != null)
    vo.setWhereClauseParams(null);
    vo.setWhereClauseParam(0, userid);
    vo.setWhereClauseParam(1, respoidid);
    vo.executeQuery();
    System.out.println("ROW COUNT IS "+vo.getRowCount());
    if(vo.getRowCount()>0)
    createRow="Yes";
    else
    createRow="No";
    return createRow;
    Problem:
    I remove the duplicate entries and click on save and get this error.
    Unable to perform transaction on the record. \nCause: The record contains stale data. The record has been modified by another user.
    \nAction: Cancel the transaction and re-query the record to get the new data.
    Thanks,
    Sombit

    Hi Anil,
    I am trying out your code but stuck in inserting the rows
    using your code in URL: http://oracleanil.blogspot.com/2010/09/oaf-passing-table-type-object-to-oracle.html
    I am always getting the same exception i.e COde blast in when I run.
    My modified code is:
    String[] as = null;
    Number[] vNumber = null;
    Number[] vNumberrespid = null;
    Number reqidnumber = null;
    reqidnumber = new Number(Integer.parseInt(reqid));
    Connection txn = getOADBTransaction().getJdbcConnection();
    String mCreateSearchRequestStatement = null;
    OAViewObject vo = (OAViewObject)findViewObject("RespLineVO1");
    int j = vo.getFetchedRowCount();
    try
    System.out.println("abouce try");
    vo.reset();
    if (vo.getFetchedRowCount() > 0)
    System.out.println(String.valueOf("Fetched row count ").concat(String.valueOf(vo.getFetchedRowCount())));
    int i = 0;
    as = new String[j];
    vNumber = new Number[j];
    vNumberrespid = new Number[j];
    while (vo.hasNext())
    vo.next();
    System.out.println(String.valueOf("Inisde the do while loop").concat(String.valueOf(i)));
    vNumber[i] = (reqidnumber);
    vNumberrespid = ((Number)vo.getCurrentRow().getAttribute("ResponsibilityId"));
    as[i] = String.valueOf(vo.getCurrentRow().getAttribute("ResponsibilityName")).concat(String.valueOf(""));
    System.out.println("Request ID "+reqidnumber[i]);//getting null even there is some value selected
    System.out.println("ResponsibilityId "+vNumberrespid[i]);//getting null even there is some value selected
    System.out.println("Resp Name "+as[i] );//getting null even there is some value selected
    i++;
    CallableStatement cs = txn.prepareCall("{call XX_PassTableType.XX_PassTableType_prc(:1, :2,:3)}");
    ARRAY array = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumber);
    ARRAY arraynew = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumberrespid);
    ARRAY array1 = new ARRAY(new ArrayDescriptor("APPS.JTF_VARCHAR2_TABLE_100", txn), txn, as);
    cs.setArray(1, array);
    cs.setArray(2, arraynew);
    cs.setArray(3, array1);
    cs.registerOutParameter(3, 2003, "JTF_VARCHAR2_TABLE_100");
    cs.execute();
    ARRAY error = null;
    error = (ARRAY)cs.getArray(2);
    if ((error != null) && (error.length() > 0))
    System.out.println(String.valueOf("Error is ").concat(String.valueOf(error.getArray())));
    String[] retError = new String[j];
    retError = (String[])error.getArray();
    System.out.println(String.valueOf("Error in saving data").concat(String.valueOf(retError[0])));
    cs.close();
    catch (Exception exception)
    throw new OAException("code blast", OAException.ERROR);
    Thanks,
    Sombit

  • How to restrict the decimal entry on dynamic table in adf 11 .6

    Hi All,
      JDev version 11.6
      I have a usecase based on dynamic VO. How to restrict the decimal numbers on table columns . When user enter the decimal number .I have to show error message.
      In order to achieve above requirement .I have added value change listener on table column .its not working as expected
    <af:table rows="#{bindings.EmployeeDynamicVO.rangeSize}"
                      fetchSize="#{bindings.EmployeeDynamicVO.rangeSize}"
                      emptyText="#{bindings.EmployeeDynamicVO.viewable ? 'No data to display.' : 'Access Denied.'}"
                      var="row" rowBandingInterval="0"
                      value="#{bindings.EmployeeDynamicVO.collectionModel}"
                      selectedRowKeys="#{bindings.EmployeeDynamicVO.collectionModel.selectedRow}"
                      selectionListener="#{bindings.EmployeeDynamicVO.collectionModel.makeCurrent}"
                      rowSelection="single" id="t1"
                      styleClass="AFStretchWidth" autoHeightRows="-1"
                      columnStretching="last" contentDelivery="immediate" >
              <af:forEach items="#{bindings.EmployeeDynamicVO.attributeDefs}"
                          var="def">
                <af:column headerText="#{bindings.EmployeeDynamicVO.labels[def.name]}"
                           sortProperty="#{def.name}" id="c1">
                  <af:inputText value="#{row[def.name]}" id="ot1"
                                valueChangeListener="#{backingBeanScope.EmployeeBean.validateINputs}"
                                autoSubmit="true">
                    </af:inputText>
                  <af:outputText value="#{row[def.name]}" id="ot6"
                                 visible="#{def.name eq 'Dummy'}"/>
                </af:column>
              </af:forEach>
            </af:table>
    So appriciate if any alternatives on above usecase. Thanks in advance

    HI
    Expected :as soon as user enter the decimal values in table column , it should throw the error message in new small new window
    Getting the value change listener and validating , but its working only tab out (Because VO is dynamic )
    please suggest us any reg expression and Validators to achieve the above scenario ?

  • How to Customize the Message "No Row Returned" from a Report

    Hi,
    I've been trying to customize the Message "No Row Returned" from a Report.
    First i followed the instructions in Note:183131.1 -
    How to Customize the Message "No Row Returned" from a Report
    But of course the OWA_UTIL.REDIRECT_URL in this solution did not work (in a portlet) and i found the metalink document 228620.1 which described how to fix it.
    So i followed the "fix" in the document above and now my output is,..
    "Portlet 38,70711 responded with content-type text/plain when the client was requesting content-type text/html"
    So i search in Metalink for the above and come up with,...
    Bug 3548276 PORTLET X,Y RESPONDED WITH CONTENT-TYPE TEXT/PLAIN INSTEAD OF TEXT/HTML
    And i've read it and read it and read it and read it and can't make heads or tails of what it's saying.
    Every "solution" seems to cause another problem that i have to fix. And all i want to do is customize the Message "No Row Returned" from a Report. Please,...does anyone know how to do this?

    My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.

  • How to restrict the changes in Relesed PO?.

    Hi all,
    How to restrict the users to make a changes in the Released PO?. User should make the changes only if it is unreleased by the respective codes.
    1. Is there any user parameters like functional authorisation?
    2. I have already suggested two solutions to the clients that
        1. To restrict the authorisation of TCodes ME22n at the user level, but it's not a suitable solution, if user want to make any changes before releasing, then system is not allow to do the changes.
        2. I have made release indicator as a 1 - not changeable if it is released, in release strategy settings. But the system is not allowing the all the users including release codes to make the changes?.
    If there is any solution, please reply immediately.
    with regards,
    Raja.

    hi,
    if u set release indicator 1, after release is taken place, for any changes, u need to revoke the release. and then change the PO.
    even u cant directly block the changes to already released PO, because, in future if at all qty or some changes is required to change, it should allow u to change!

  • How to increase the number of rows in Status Oveview iView in MSS?

    Hi
    We have implemented MSS and have a question regarding Status overview iview.
    The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
    Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
    I checked the options in iView property and do not see any option to increase the number of rows.
    please help
    Thanks
    -Michael

    Hi Micheal,
    Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
    Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
    Regards
    <b>Raja Sekhar</b><i></i>

  • How to limit the number of rows in a smart form , sap script.

    Can anyone tell me how to limit the number of rows in the output of a sap script/smart form. I have tried "protect/endprotect" in sap script but have no idea of how to do in smart form. In sap script the only way it has happened is by reducing the size of the main window.

    Hi,
    In Smartform also, why dont you try reducing the size of the window if you want to limit the rows in it. Also if you are printing Line Items in a LOOP, you can write
    LOOP AT T_ITAB FROM 1 TO N in the LOOP Node if you know how many records exactly you want to display in 1 Page processing.
    regards,
    Mahesh

  • How to count the number of rows in a resultser object?

    hi there
    how to count the number of rows in a resultser object which may contains millions of rows? besides using a while loop? thanks

    You don't, you execute a query whose result is the record count of those records that match the search and then you execute the actual query to create your record set. Typically you do
    select count(id) from YourTable where [filter]
    from the resulting ResultSet do
    int res.getInt(1);
    which gives you the count and then
    select id from YourTable where [filter]
    to produce the actual result set.
    in the second query the id part can be substituted with the actual fields you want.

  • How to restrict the job start conditions (only "Immediate" type) ?

    Hi,
    We allow our users to schedule and execute in background mode transactions (example IP19, IW38). We gave them for that authorizations (object S_BTCH_JOB with LIST, PROT, RELE and SHOW - objetct S_PROGRAM with BTCSUBMIT).
    We would like that users can schedule and execute their jobs only with the u201CImmediateu201D job start condition (in the Start Time screen for the type of start condition : Immediate, Date/Time, After job, After event, or At operation mode).
    Another solution: prohibit the scheduling and the execution background job in a certain time interval ...
    How can restrict the job start conditions ?
    Thank you.
    Patrice.

    Hi Jan,
    Yes, sa38 makes it possible indeed to execute in background into immediate mode a job but
    the user have to know the name of the program to be carried out ...
    The user knows only the name of these transactions trade. For example, IW38.
    In the menu of this transaction, SAP gives the possibility to execute in background :
    Program --> Execute in Background --> display of Start Time screen for the type of start condition :
    Immediate, Date/Time, After job, After event, or At operation mode).
    It is at this time there that we want that the user can only choose the "immediate" mode.
    We must thus prohibit the other choices (Date/Time, After job, After event, or At operation mode) ... and
    and we don't know how to restrict these other options in this screen "Start Time screen for the type of start condition".
    Thank you.
    By.

  • How to restrict the department to not user other departments' equipment?

    Dear SAPIENTS,
    How to restrict the department to not user other departments' equipment? If suppose any one creating order for equipment having different authorization group then system should not allow me to do this.
    Regards,
    Kaushal Rai

    Kaushal Rai,
    Use Authorization group for technical objects, create authorization gruops in IMG and assign the same to the Equipment master and block the other department with the same authorization group. For ristricting the authorization group to other departments after creating and assigning it to the equipment seek help from your BASIS team.
    goto the below path for cerating the Authorization group:
    IMG - PMCS - Master data in PMCS - Technical Objects - Define Authorization groups:
    Here you define the authorization groups, after completion of this step go to the Equipment master in General Data tab page there is a feild Authourization Group, mention the respective authorization group and provide this Authorization gruop value to the respective user in the user role with the help of BASIS Team.
    Regards,
    Praveen.

Maybe you are looking for