How to restrict the Standard Check In Page

Hello,
Please let me know how to restrict standard check in page in sysadmin account.
It would be great if anyone replying me as soon as possible.
Thanks,
Ramesh

If I got your question, you intend to restrict a user 'sysadmin' (or someone with similar permissions) from any check in. And I guess, it's 10g (it 11g you would probably mention 'weblogic', because 'sysadmin' is already quite restricted there).
Well, you cannot use security model (roles, security groups and all that stuff), because you would disable admin rights together with checkins ('W' permission).
Therefore, the only way I can think of, is a component. You can create a custom component that will modify CHECKIN service to prevent a particular user or group of users from checkin of particular (or all) content. Check HOWTOCOMPONENT to get an idea. Or drop me an email and I send you a component which does a similar check, but controls that a user cannot exceed his or her quota.
Alternatively, you could also modify GUI to disable access to CHECKIN pages to such people - but I would suggest to use the component as well - users could use other ways (checkin via website or virtual folders) and GUI change would not work for these.

Similar Messages

  • How to restrict the standard notifications processing

    Dear PM Gurus,
    i copied standard notifications and i used customized notifications. Now i want to restrict the standard notifications using. users are using standard notifications mistakely and system generates the standard notification "M1" actually i customized "z1", so i required when ever user enter the notification type "M1" in IW21 t.code and execute it system should throw an error message. please guide me and help me to restrict the "M1", "M2" & "M3". if its required any user exits please tell me the user exits also.
    thanks to all in advance.
    regards
    jalu

    First Method:
    You can unassign number range for the unused notification types.
    Second Method:
    In selection of notification type in IW21, press F4. It will pop up window with all the types. Click the notification types which should be used & click Insert in Personal list button in the top near Find button. But This should be done each & every user if user name is different.
    Also don't teach them about this functionality as this can be revoked by them without any restriction.

  • How to remove buttons from standard check in page

    Hi,
    Can any one tell me how to hide buttons from the standard check in page and re-arrange field in UCM. I want to just display Check In, Reset and Quick Help.
    Thanks,
    Abhijit
    Edited by: AbhijijitPr on Sep 6, 2010 2:28 PM

    Hey Tim,
    Even i am facing a similar situation but i have to hide the field on the selection of an option list
    How can i do it through profile and rules?
    Can it be done by using custom includes in the fields?
    if yes how?
    Thanks,

  • How to print the Actual Check on 1st Page if line items are more for F110_p

    Hi,
    How to print the Actual Check on 1st page if the line items are more in F110_PRENUM_CHCK script. The standard script is printing at the last page of line items.
    I tried using
    IF &PAGE& EQ '1 '
    /E 545 --> text element
    ENDIF
    but it is of no use.
    Please let me know if anyone knows. Thanks in Advance.

    Hi Krishna,
    I guess, there is no other possible way to acheive this without modifying the standard driver program. Why because? in you driver program you check window will be called only on the last page... but before you change your driver program give a try like shown below....
    Not sure, but give a try... In the first page you will be printing some void check try to replace the code inside the text element of void check with original check and make all the check void... note: in this text element, be sure you write two conditions...
    IF &PAGE& = 1.
    **PRint all check values..
    ELSE.
    ***Print void values
    ENDIF.
    Close the thread if your question is answered.
    Regards,
    Sairam

  • How to print the Terms and Condition page ine the sap-script

    Hi experts,
                             i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages)  i have called the hard coded text(i.e so10 text), but when i am displaying the output  data get printed in the first page but i am getting the second page heading on the top of  the terms and condiions page. In all the three pages i  have the same main window, if i  make change in any window i will affect all the other main  windows.  so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
    like this i have called in the MAIN WINDOW
    /E : LAST ( IN ALL THREE PAGES)
           INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
    IN THE TCODE SO10
    NEW PAGE TERMS.
    1) TERM MS AND CONDITONS  TEXT.................................................
    FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

    Hi,
    1. Create a new page by Name : LAST
    2. Identify the text element which will be the last element in the form in the debug mode.
    Mostly Ex: SUM, TOTAL, LAST etc.,
    3. the page linking should be
    First --> Next
    Next --> Next
    4. In the Text element identified in the step 3.
    Write the following code
    /: NEW PAGE  LAST
    /: INCLUDE the standard text created for the terms and conditions in SO10
    Check the syntax for the command but the logic will be the same.
    It should resolve your problem.

  • HOW to Restrict the input Help for 0MATERIAL in the BPS Layout

    Hi,
    I have requirement to Restrict the input Help for 0MATERIAL  in the BPS Layout.
    For Example if the Planning Package is Restricted to SALES ORGANISATION ( 3000 )  then the system shuold  check the 0MAT_SALES  where SALES ORGANISATION IS "3000" )AND PASS THE Material Numbers to the 0material list.
    I have Copied the standard Funtcion group  "UPF_VARIABLE_USER_EXIT"  to Z fucttion and have attached to Z Variabe as User Exit .
    this Variable is  Attached to 0material in the Planning Pakage. So tha now the 0MATERIAL is restricted to the variable which is having the User Exit.
    But how to acces the Values of Planning Package for which the Layout is bein Executed from this Z User Exit ???
    I Know how to restrict the input help, but my only problem is that how to get the values of Planning package through this User Exit.
    Please suggest if it is possible.
    Regards,
    Nilesh Labde

    Hi Nilesh,
    As I understand from your question,you know how to restrict but the issue is to know the value in the package with which you need to restrict.
    There are two tables which can help you finding the value used in package for sales organisation:
    1. UPC_PACKAGE
    2. UPC_OPTIOS
    How to use ?
    From UPC Package you will get one GUID, Hit the second table UPC_OPTIOS with this GUID.
    In field "FIELDNAME" enter the name of the characteristic whose value is req (sales organisation in your case)
    Hope this helps you
    Mann

  • How to restrict the department to not user other departments' equipment?

    Dear SAPIENTS,
    How to restrict the department to not user other departments' equipment? If suppose any one creating order for equipment having different authorization group then system should not allow me to do this.
    Regards,
    Kaushal Rai

    Kaushal Rai,
    Use Authorization group for technical objects, create authorization gruops in IMG and assign the same to the Equipment master and block the other department with the same authorization group. For ristricting the authorization group to other departments after creating and assigning it to the equipment seek help from your BASIS team.
    goto the below path for cerating the Authorization group:
    IMG - PMCS - Master data in PMCS - Technical Objects - Define Authorization groups:
    Here you define the authorization groups, after completion of this step go to the Equipment master in General Data tab page there is a feild Authourization Group, mention the respective authorization group and provide this Authorization gruop value to the respective user in the user role with the help of BASIS Team.
    Regards,
    Praveen.

  • How to restrict the delivery quantity not more than target quantity?

    Dear Gurus,
    How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
    1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
    2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
    Any other effective method? Please advice. Thanks.
    Regards,
    David

    Dear all,
    It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
    I think there must be somewhere besides of those you menetioned.
    I notes that SAP help for the overdelivery tollerance setting of scheduling agreement: 
    Overdelivery Tolerance Limit
    Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
    Dependencies
    If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
    Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
    Pls help! Thanks.
    Regards,
    David

  • How to restrict the upload file size in me21n/me22n/me23n?

    Hi Guru's,
    I have a requirement to restrict the user from attaching a local file more than 20MB in Purchase Order.
    In standard SAP system, the user can attach a file of any size in PO. How to restrict the size of the file?
    I have no clue how to achieve this? Any kind of help would be great...
    Thanks in Advance...
    Regards,
    Satyam

    Hi Guru's,
    The file size is now restricted in function GUI_UPLOAD. But this function module is used at many places. I want to restrict it only for Tcode: ME22n and ME23n.
    I thought of restricting it by sy-tcode field but sy-tcode value  is not passed to this function module in the run time.
    Could anyone help me on this how to restrict it for the above mentioned tcodes??
    Regards,
    Satyam

  • How to restrict the Copying/printing of the file from document

    Hi..
    Case:
    1. I have a document number it has three files in it.I want to locked the files from priniting and copying but not from opening/displaying.
    2. I am using content server for storing the DMS documents.How to restrict the number of attachments that can be uploaed in one document number?
    3.How to restrict the maximum size that can be uploaded against one document number?
    Sandip

    Hi Sandip,
    1. I have a document number it has three files in it.I want to locked the files from priniting and copying but not from opening/displaying.
    In DC30 transaction,in Workstation application for network,disable the print option.Will ensure users will not be able to print the originals.
    2. I am using content server for storing the DMS documents.How to restrict the number of attachments that can be uploaed in one document number?
    See if your ABAPer can use the BADI  'DOCUMENT_MAIN01' with method 'BEFORE_SAVE' to handle this check.
    3.How to restrict the maximum size that can be uploaded against one document number?
    Believe you are using kPro as a storage option.If this is the case,then there is no setting available to limit the file size for upload.See if your Basis guy can set an upper limit for file size in IIS setting for your content server.
    If you are using SAP DB as a storage option(not recommended though),then use the field File Size in DC10 transaction,Define Document Types to effect a file size limit.
    P.S. Would appreciate incase you could close the threads which have been answered satisfactorily.
    Regards,
    Pradeepkumar Haragoldavar

  • How to restrict the st loc list applicable to particular plant mm01

    Hi,
    While creating material master user after selecting a particular plant user sees all the storage locations available in the system.How to restrict the storage location list applicable to particular plant while material creation
    Best Regards,
    BM

    Hi,
    As Mahesh said , you need to put validation there, please contact your development team for this.
    Though you are able to see all storgae location you are not able to create the material master, it throws as error if you select incorrect storage location which is not maintained for that particulare plant.
    It gives an error message
    Entry Plant SL  does not exist in T001L (check entry)
    So user will not be able to create material master for improper plant SL combination.
    Thanks,
    Ravi

  • How to see the keyboard shortcuts in pages like " alt " function in word?

    how to see the keyboard shortcuts in pages like " alt " function in word?

    luisandre wrote:
    In word , if you press "alt" show you all the options you have . Appear numbers or letters  in each options of the toolbar. So is more easy to work with the keyboard. How do you do this in pages?
    Go to system preferences/language & text/input sources and check the box for Keyboard Viewer.  Then select Keyboard Viewer from the "flag" menu at the top right of the screen.  It will show all the special characters you can make when you press the alt and alt + shift keys.

  • How to enable the standard price in the accounting -1 view of material mast

    Hi,
    When i was trying to create a material of material Type: FERT, Iam unable to enter the price of the material in the accounting -1 view-> standard price.
    The field has been disabled.
    So please tell me how to enable the standard price.
    Regards,
    Rudra Prakash. S

    hi
    go to OMS2  double click FERT
    in valuation check which price control is allowed
    it should be std. price
    go to OMSR  check MBEW-STPRS  note field group
    in OMS9 for this group and material combination check whether that field is maintained as display
    Vishal...

  • How can I prevent firefox to Offer to save passwords and how to remove the tick checked when I log in to gmail?

    While using firefox I am using, private browsing and not remembering any passwords.
    When I login to Gmail, the login page shows option to type in my gmail id and then password, and at the bottom, it gives the option of checkbox to remember the password next time. NOW, the problem is that, THIS CHECK box is always TICKED (Checked). I don't want it to be checked at all.
    So How can I prevent firefox to Offer to save passwords and how to remove the tick checked when I log in to gmail?
    Thank you so much.

    Hi Imran_Afzal, if you know that setting the cookie has no effect after you close your private browsing session, is it really worth finding a hack to clear the checkbox?
    I believe in order to do that you would need to use an extension or userscript. However, I haven't searched for one.
    ''Note: When searching for a userscript on userscripts.org, be very cautious as many hacked scripts have been posted lately. Check reviews and check the code to make sure it only runs on your Google site before installing.''

  • How to restrict the particular value in BEx?

    HI,
    I have added particular dimension in query prompt. While refreshing i got more value in particular dimension. How to restrict the the value in bobj or bex?
    Here i attached the screen shot. Please find the attachment.

    Hi Mani,
    Please make sure of your requirement. If you are using only one single query for multiple reports then i strongly recommend the below criteria or else it better to restrict the value in the BEx itself if you have no other reports on the same BEx query.
    If you are trying to restrict a report to a default prompt value then use equal to in query filter prompt or you can also restrict them to list of values i.e multiple values.Please follow as per the screens below. I am mentioning two ways.
    Method:1
    Step 1: Click on Prompt Options(Blue Questionmark Symbol)
    Step: 2 : Click on the Values after you check the prompt properties options as shown below.
    Step 3: Search for values if they are keys by checking the "Search in keys" or else not required.
    Method 2: Here is another Easy way is Just give the input in the value box as shown below.
    Let me know if you need any further help.
    Regards,
    Naveen

Maybe you are looking for