How to return number range from sql (dual table)
in sql plus
I need to display values (numbers)1 to 52 from dual
eg,
1
2
3
4
5
etc...
Is this possible, can you display a range of numbers from an sql statment without creating atble holding the required numbers.
I am trying to display 1 to 52 (week numbers) but I need to do this from the dual table.
Creating a table with values 1 to 52 looks like a waste?
Thanks in anticipation.
SD.
If you're running on 9i you may find the solution I posted Re: List all days of a month in single SQL to be useful. Otherwise the general discussion will provide some illumination.
Cheers, APC
Similar Messages
-
How to change number range from internal to external?
Hi Experts,
I have changed the number ranges for accounting document for company code (A1) external to internal and posted one accounting document using the tr.code FBN1. Now i need to revert back the changes for the number range from internal to external. i am not able to cancel the accounting document as its cancellation accounting document? please let me know any other way to change the number range from external to internal?
Thanks & Regards,
RajHi Siva,
Thanks for your reply. But my expectation is any other way to change the number range from internal to external instead of going new number range (By taking any technical help)? -
How to return a value from sql plus activity
Hi,
I want to return a value from sqlplus activity to a processflow variable.
SQL PLUS activity has a property :"RESULT_CODE", whenever i run the process flow this value is always reurned as 0.
in sqlplus activity i have written some pl/sql block....
for example
begin
end;
exit
i want to do something like
begin
if v=100 then
return 1
else
return 0;
end if;
end;
exit
can some please tell me how can i return value from this pl/sql block to proessflow.
Regards,
RD_RBStable ==> function
input param from table to function. ==> input mapping paramter to store the output from the mapping.
Will this now work. -
How to execute procedure returning data rows from sql plus
Hi,
I want to execute a stored procedure that returns data rows from sql plus. please let me know the syntax for the same.
Thanks,
YGuser13065317 wrote:
Even if i get the result set into the cursor, do i have to do normal fetch into all the coumn variables within a loop
But suppose no of columns in my result set varies depending on a parameter to the stored procedure.
Is there any straightforward way to retrieve all the data irrespective of no of columns in the result set.There is no such thing as a "+result set+". Oracle does not create a temporary data set in memory that contains the results of your query. What would happen if this result set is a million rows and is too large to fit into memory? Or there are a 100 clients each with a 100,000 row result set?
This is not scalable. You will be severely limited in the number and sizes of these "+result sets+" that can be created in server memory.
A cursor is in fact a "program" that is created by compiling the SQL source code that you provide. This source code is parsed and compiled into what Oracle calls an execution plan. This is nothing but a series of instructions that the cursor will execute in order to return the rows required.
Thus the result set is actually the output from a cursor (a program). Likewise, bind variables are the input parameters to this program.
All SQLs are parsed and compiled as cursors and stored in the SQL Shared Pool. Oracle gives you handle in return to use to address this cursor - bind values to it, execute it, describe the output structure returned by the cursor, and fetch the output from the cursor.
On the client side, this handle is used in different ways. In PL/SQL alone, this cursor handle can be used as an implicit cursor (you do not even see or use the cursor handle in your PL/SQL code). Or you can use a PL/SQL cursor variable. Or a DBMS_SQL cursor variable. Or a reference cursor variable.
Why so many different client structures for the very same SQL cursor handle returned by Oracle? Because to allow you, the programmer, all kinds of different features and flexibility.
The ref cursor feature is the ability to pass this cursor handle around, not only between PL/SQL code, but also from PL/SQL to the actual client process (Java. VB, SQL*Plus, TOAD, etc).
The primary thing to remember - irrespective of what the client calls this (e.g. ref cursor, SQL statement handle, etc), this all refers to the same SQL cursor in the Shared Pool. And that this SQL cursor is a program that outputs data, and not a result set in itself. -
[UIX] How To: Return multiple values from a LOV
Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
model="${bindings.DepartmentId}"
id="${bindings.DepartmentId.path}"
destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
model="${bindings.DepartmentId}"
id="DepartmentId"
destination="departmentsLov.uix"
partialRenderMode="multiple"
partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
id=DepartmentName
model="${bindings.DepartmentName}"
columns="10"
disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
<compound>
<set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
<set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
</compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
<compound>
<set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
<set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
</compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido -
How to transport number range group Configuration in Material Master
Hi,
I have this query regarding how to transport number range group in material master from one server to another.
Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
Can anybody help me with this I hope the query is clear.
Regards
VivekHi,
Number range objects can be transported using Workbench requests.
Thanks
Kishore -
Question: How to assign number ranges to the Official Excise Document Numbe
Question: How to assign number ranges to the Official Excise Document Number
Field name is: EXNUM, table name: J_1IEXCHDR
SAP CIN
Dear expert,
I will briefly explain the scenario:
I have created return po.
Process MIGO w.r.t. return PO- Material document generated.
Process: J1IS - excise invoice other movement create.
--> Now I want to print the document --> I m trying with T-code J1IP --> entered all the required data --. Used out put type - J1I0
But I am not getting the list of document for printing and even print is not coming.
There is no print document getting for a printing.
When I checked in an above said table (mentioned in question), I found that for transaction type OTHR, there is no number ranges defined for official document no.
And because of this reason I m not getting any document in the print.
Can you Pl extend Ur help and Pl suggest me where (path or transaction) the number ranges can be maintained for the official excise document No.
Thanking you all n advance and expecting your earliest response.
Regards
omDear Friend,
J_1IEXCHDR this table stores the all the excise documents created while excise transactions are done ,
for that Goto j1i9 or SNRO in these transaction you maintiane the number ranges for the
J_1IPLA2 PLA part II number range object
J_1IRG1 RG1 Number range object
J_1IRG1_T No. Range for RG1 - Excise group / Material
J_1IRG23A1 RG23A part 1 no. range object
J_1IRG23A2 RG23A part II number range object
J_1IRG23C1 RG23C part I number range object
J_1IRG23C2 RG23C part II number range object
J_1IRG23D Folio Numbers for RG 23D
like these lot of objects are there for them u maintiane the no. ranges
Regards
Pramod -
Error in changing the number range from the external to the internal no.
Dear all,
Here is the error found when using the T-Code PA30 for hiring an employee. while changing the number range from external to internal using Tcode PE03, the error found was ' could not find interval for the number range'
Can anyone help me out?Hi,
Thanks for your reply.
Please check out what i have done
The number range intervals displayed using T-code PA04 are
No From To Current No. Ext.
1 00000001 00069999 checked
2 00070000 00079999 70295 unchecked
3 00080000 09000000 checked
Using T-code PE03, the feature numbkr was changed i.e the return value has been changed from 3 to 2(internal no. assigned)
Error found when performing action using T-Code PA30 is -could not find interval for the number range 2.
Could you please clarify?
Thanks -
How to determine number range for billing document based on company code ..
Hi Friends!!
can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
Amit...plz help me!!Hi Amit,
1. Define different Billing Document number ranges in SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
e.g.
NO. From number To Number Current number Ext
A1 0930000000 0930999999
A2 0940000000 0940999999
A3 0950000000 0950999999
2. Define a Ztable ZNUMB_RANGE as follows
Comp. Code | Tax departure country | Billing Doc Type | Number Range
100 IN F2 A1
200 IN F2 A2
200 US F2 A3
3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
If found pass this number range value to us_range_intern.
us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
Let me know if you are clear.
Thanks,
Mandar -
How to access Oracle 8g from SQL Server 2005 SP3 EE 64 Bits ?
Dear All,
How to access Oralce 8g from SQL Server 2005 SP3 EE 64 Bits (liked server).
Best regards,
Miguel GavinhosHi!
For the Oracle version is 8.1.6. what should I install, to access Oracle trought a linked server.
Best regards
Miguel Gavinhos -
How to connect to db from sql navigator ?
database active and working.
login from web working normally.
how to connect to db from sql navigator ?Remote connections generally need three bits of information, whether its an oracle, odbc, or some other type of client ...
1. Where does the database "live" (hostname or IP address)
2. What port is the database listener "listening" on for connections
3. What is the database service name or $ORACLE_SID
Default port is 1521, if its an XE install the service name is XE out-of-the-box (as set up by the installer and no DBA intervention.) -
I have to customized the number range from 0000000A0000 to 9999999Z9999
Dear all
I have to customized the number range from 0000000A0000 to 9999999Z9999 internally but in tran. MMNR system throws error enter numerical value only.is it not possible to enter alfa numerical number range.Pl. help me.
Reg-AJIThi,
Internal No. range can be only numeric and external no. range can be numeric, alphanumeric or alphabetic.
Regards
Priyanka.P -
How to Call a Procedure from SQL ?
Hi All,
I've a procedure defined like the below taking IN/OUT parameters as table type.
PROCEDURE "SAP_HANA_DEMO"."usersCreateMethod" (IN row "SAP_HANA_DEMO"."User.Details",
OUT error "SAP_HANA_DEMO"."EPM.Procedures.tt_errors")
Now, how do i call it from SQL ?
I'm trying to call it like
CALL "SAP_HANA_DEMO"."usersCreateMethod"('my_global_table','?');
It says
Could not execute 'CALL "SAP_HANA_DEMO"."sap.hana.democontent.epm.Procedures::usersCreateMethod"('my_global_table','?')'
SAP DBTech JDBC: [1288]: expression cannot be used as an assignment target: '?': line 1 col 97 (at pos 96)
Thanks & Regards
SakthivelHi ,
You should call like this
Define a variable of your table type.
Define ErrorMessage SAP_HANA_DEMO"."EPM.Procedures.tt_errors"
CALL "SAP_HANA_DEMO"."usersCreateMethod"('my_global_table',ErrorMessage);
Regards,
Krishna Tangudu -
How to convert from SQL Server table to Flat file (txt file)
I need To ask question how convert from SQL Server table to Flat file txt file
Hi
1. Import/Export wizened
2. Bcp utility
3. SSIS
1.Import/Export Wizard
First and very manual technique is the import wizard. This is great for ad-hoc and just to slam it in tasks.
In SSMS right click the database you want to import into. Scroll to Tasks and select Import Data…
For the data source we want out zips.txt file. Browse for it and select it. You should notice the wizard tries to fill in the blanks for you. One key thing here with this file I picked is there are “ “ qualifiers. So we need to make
sure we add “ into the text qualifier field. The wizard will not do this for you.
Go through the remaining pages to view everything. No further changes should be needed though
Hit next after checking the pages out and select your destination. This in our case will be DBA.dbo.zips.
Following the destination step, go into the edit mappings section to ensure we look good on the types and counts.
Hit next and then finish. Once completed you will see the count of rows transferred and the success or failure rate
Import wizard completed and you have the data!
bcp utility
Method two is bcp with a format file http://msdn.microsoft.com/en-us/library/ms162802.aspx
This is probably going to win for speed on most occasions but is limited to the formatting of the file being imported. For this file it actually works well with a small format file to show the contents and mappings to SQL Server.
To create a format file all we really need is the type and the count of columns for the most basic files. In our case the qualifier makes it a bit difficult but there is a trick to ignoring them. The trick is to basically throw a field into the
format file that will reference it but basically ignore it in the import process.
Given that our format file in this case would appear like this
9.0
9
1 SQLCHAR 0 0 """ 0 dummy1 ""
2 SQLCHAR 0 50 "","" 1 Field1 ""
3 SQLCHAR 0 50 "","" 2 Field2 ""
4 SQLCHAR 0 50 "","" 3 Field3 ""
5 SQLCHAR 0 50 ""," 4 Field4 ""
6 SQLCHAR 0 50 "," 5 Field5 ""
7 SQLCHAR 0 50 "," 6 Field6 ""
8 SQLCHAR 0 50 "," 7 Field7 ""
9 SQLCHAR 0 50 "n" 8 Field8 ""
The bcp call would be as follows
C:Program FilesMicrosoft SQL Server90ToolsBinn>bcp DBA..zips in “C:zips.txt” -f “c:zip_format_file.txt” -S LKFW0133 -T
Given a successful run you should see this in command prompt after executing the statement
Starting copy...
1000 rows sent to SQL Server. Total sent: 1000
1000 rows sent to SQL Server. Total sent: 2000
1000 rows sent to SQL Server. Total sent: 3000
1000 rows sent to SQL Server. Total sent: 4000
1000 rows sent to SQL Server. Total sent: 5000
1000 rows sent to SQL Server. Total sent: 6000
1000 rows sent to SQL Server. Total sent: 7000
1000 rows sent to SQL Server. Total sent: 8000
1000 rows sent to SQL Server. Total sent: 9000
1000 rows sent to SQL Server. Total sent: 10000
1000 rows sent to SQL Server. Total sent: 11000
1000 rows sent to SQL Server. Total sent: 12000
1000 rows sent to SQL Server. Total sent: 13000
1000 rows sent to SQL Server. Total sent: 14000
1000 rows sent to SQL Server. Total sent: 15000
1000 rows sent to SQL Server. Total sent: 16000
1000 rows sent to SQL Server. Total sent: 17000
1000 rows sent to SQL Server. Total sent: 18000
1000 rows sent to SQL Server. Total sent: 19000
1000 rows sent to SQL Server. Total sent: 20000
1000 rows sent to SQL Server. Total sent: 21000
1000 rows sent to SQL Server. Total sent: 22000
1000 rows sent to SQL Server. Total sent: 23000
1000 rows sent to SQL Server. Total sent: 24000
1000 rows sent to SQL Server. Total sent: 25000
1000 rows sent to SQL Server. Total sent: 26000
1000 rows sent to SQL Server. Total sent: 27000
1000 rows sent to SQL Server. Total sent: 28000
1000 rows sent to SQL Server. Total sent: 29000
bcp import completed!
BULK INSERT
Next, we have BULK INSERT given the same format file from bcp
CREATE TABLE zips (
Col1 nvarchar(50),
Col2 nvarchar(50),
Col3 nvarchar(50),
Col4 nvarchar(50),
Col5 nvarchar(50),
Col6 nvarchar(50),
Col7 nvarchar(50),
Col8 nvarchar(50)
GO
INSERT INTO zips
SELECT *
FROM OPENROWSET(BULK 'C:Documents and SettingstkruegerMy Documentsblogcenzuszipcodeszips.txt',
FORMATFILE='C:Documents and SettingstkruegerMy Documentsblogzip_format_file.txt'
) as t1 ;
GO
That was simple enough given the work on the format file that we already did. Bulk insert isn’t as fast as bcp but gives you some freedom from within TSQL and SSMS to add functionality to the import.
SSIS
Next is my favorite playground in SSIS
We can do many methods in SSIS to get data from point A, to point B. I’ll show you data flow task and the SSIS version of BULK INSERT
First create a new integrated services project.
Create a new flat file connection by right clicking the connection managers area. This will be used in both methods
Bulk insert
You can use format file here as well which is beneficial to moving methods around. This essentially is calling the same processes with format file usage. Drag over a bulk insert task and double click it to go into the editor.
Fill in the information starting with connection. This will populate much as the wizard did.
Example of format file usage
Or specify your own details
Execute this and again, we have some data
Data Flow method
Bring over a data flow task and double click it to go into the data flow tab.
Bring over a flat file source and SQL Server destination. Edit the flat file source to use the connection manager “The file” we already created. Connect the two once they are there
Double click the SQL Server Destination task to open the editor. Enter in the connection manager information and select the table to import into.
Go into the mappings and connect the dots per say
Typical issue of type conversions is Unicode to non-unicode.
We fix this with a Data conversion or explicit conversion in the editor. Data conversion tasks are usually the route I take. Drag over a data conversation task and place it between the connection from the flat file source to the SQL Server destination.
New look in the mappings
And after execution…
SqlBulkCopy Method
Sense we’re in the SSIS package we can use that awesome “script task” to show SlqBulkCopy. Not only fast but also handy for those really “unique” file formats we receive so often
Bring over a script task into the control flow
Double click the task and go to the script page. Click the Design script to open up the code behind
Ref.
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/ -
Hi All Sap Experts
Please tell me How to create Number Range
I tried with the Transaction Code " SNRO "
But Im getting The following error
Dialog box title : " Buffering Methods ".
Message in the Dialog box is :
-Numbers may be lost!
-Do not use for Financial accounting Documents!!
?. Do you want set this Buffering method?
And another error is :
Dialog box title : " Transport number range intervals "
Message in the Dialog box is :
The number range intervals are not included in automatic customizing changes.
Transport all changes made within range interval maintenance must be
triggered manually.
In the initial screen for range interval maintenance function
<b> Interval</b> --> <b>Transport</b>
Please note the information that you get when transporting intervals.
So please tell me the solution for this error.
Thank you
Basu
Another ishi,
Create number range object using OYSN.
Then call the following function modules.
FORM get_next_id CHANGING p_discrep.
DATA: last_id LIKE zrecaudit-discrep,
quant LIKE inri-quantity, "dummy
code LIKE inri-returncode. "returncode
CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
EXPORTING
object = 'ZRECAUDIT'
EXCEPTIONS
foreign_lock = 1
object_not_found = 2
system_failure = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = '01'
object = 'ZRECAUDIT'
IMPORTING
number = last_id
quantity = quant
returncode = code
EXCEPTIONS
interval_not_found = 1
number_range_not_intern = 2
object_not_found = 3
quantity_is_0 = 4
quantity_is_not_1 = 5
interval_overflow = 6
buffer_overflow = 7
OTHERS = 8.
CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
EXPORTING
object = 'ZRECAUDIT'
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
ENDIF.
ENDFORM. " get_next_id
<u><i><b>refer the links</b></i></u>
http://www.sap-img.com/ge003.htm
http://www.sap-basis-abap.com/sapmm009.htm
http://www.erpgenie.com/abap/code/abap33.htm
http://www.kabai.com/abaps/z26.htm
Rgds
Anversha
Maybe you are looking for
-
How to change the position of a notation from treble to bass clef?
hi there, i am trying to print out a score from GB '08 that looks more like a piano score (with red hand notes on the treble clef and left hand notes on the bass clef) but can't seem to find a way to do it. can anyone help? thanks!
-
Hi Sean. My Enermax PSU arrived this morning. woohoo. After a few hours of stressing the PC with Unreal Tourny 2003 and some serious overclocking I can safely say my problems have been solved. cheers Mate. Mebbe a sticky on this forum as well about t
-
ResultSet in combo with JSP tag
Hi, according to MVC, I use an EJB to get data from database and then I make it available to JSP page through a servlet. In my JSP page I'd want to show my data using a code like this: <select name="profile"> <c:forEach var="profileString" items="${l
-
hi!! i want to download adobe after effects cc but i can 't i have download 2 times the creative cloud (i install and i unstall and next again install but nothing) i have no a lot of apps i search and for other problems in youtube and google but i di
-
When I try to import a CD into itunes - it appears to do so in a matter of seconds. Each track gets the little tick to notify that it has been done, however no details transfer to the library. If I double click on a track from the CD to play it, it a