How to roatate .out fies for weblogic in windows

Hi ,
I am getting large amount of .out files in my manage servers.now i am able to raotating .log files.IN the way how can i roatate .out files in windows.
Regards
Mad

is changing the behaviour of a running class like that really going to be any use for debugging? what's the actual problem?

Similar Messages

How to roatate .out weblogic logfiles in windows environment

How to roatate .out weblogic logfiles in windows environment

Hello,
You can follow the below approach;
By default, every 24 hours the Windows service archives messages to a file named pathname-yyyy_mm_dd-hh_mm_ss. New messages collect in the file that you specified when you set up the service.
You can change the time interval or you can set up rotation to occur based on the size of the message file instead of a time interval.
To change the default criteria at which the Windows service rotates message files:
If the Windows service is running, shut it down.
Edit the file you specified in the -log: pathname argument. If a file does not exist, create one.
For example, if you issued the example command in step 3. in the previous section, create a file named d:\bea\wlserver6.1\config\mydomain\myserver-stdout.txt.
Do one of the following:
If you want the Windows service to rotate the message file at a specific time interval regardless of file size, add the following statements at the top of the file, each statement on a separate line (make sure to press the Enter or Return key after typing the last line):
# ROTATION_TYPE = TIME
# TIME_START_DATE = date-in-required-format
# TIME_INTERVAL_MINS = number-of-minutes
where TIME_START_DATE specifies when the first rotation should take place. If the specified time has already passed, the first rotation occurs when the time interval specified in TIME_INTERVAL_MINS expires. You must use the following format to specify the start time: Month Day Year Hour:Minutes:Seconds
where Month is the first 3 letters of a Gregorian-calendar month as written in English
Day is the 2-digit day of the Gregorian-calendar month
Year is the 4-digit year of the Gregorian calendar
Hour:Minutes:Seconds expresses time in a 24-hour format
and TIME_INTERVAL_MINS specifies how frequently (in minutes) the Windows service rotates the file.
For example:
# ROTATION_TYPE = TIME
# TIME_START_DATE = Jul 17 2003 05:25:30
# TIME_INTERVAL_MINS = 1440
When the time interval expires, the Windows service saves the file as pathname-yyyy_mm_dd-hh_mm_ss. It then creates a new file named pathname. This new file, which contains all of the headers that you specified originally, collects new standard out and standard error messages.
If you specify # ROTATION_TYPE = TIME but do not include the other lines, the Windows service rotates the message file every 24 hours.
If you want the Windows service to rotate the message file after the file grows beyond a specified size, add the following statements at the top of the file, each statement on its own line (make sure to press the Enter or Return key after typing the last line):
# ROTATION_TYPE = SIZE
# SIZE_KB = file-size-in-kilobytes
# SIZE_TRIGGER_INTERVAL_MINS = polling-interval
where SIZE_KB specifies the minimal file size (in kilobytes) that triggers the Windows service to move messages to a separate file.
and SIZE_TRIGGER_INTERVAL_MINS specifies (in minutes) how frequently the Windows service checks the file size. If you do not include this header, the Windows service checks the file size every 5 minutes.
For example:
# ROTATION_TYPE = SIZE
# SIZE_KB = 1024
# SIZE_TRIGGER_INTERVAL_MINS = 3
When the Windows service checks the file size, if the file is larger than the size you specify, it saves the file as pathname-yyyy_mm_dd-hh_mm_ss. It then creates a new file named pathname. This new file, which contains all of the headers that you specified originally, collects new standard out and standard error messages.
If you specify # ROTATION_TYPE = SIZE but do not include the other lines, the Windows Service checks the size of the message file every 5 minutes. If the file is larger than 1 megabytes, it rotates the file.
References:-
http://download.oracle.com/docs/cd/E13222_01/wls/docs81/adminguide/winservice.html
Hope this helps!!!
Regards,
R

How to get out of for loop in eclipse debugging

How to get out of for loop in eclipse debugging for java classes ?
I am in a for loop in a code. i want to get out of it ...but how ?

is changing the behaviour of a running class like that really going to be any use for debugging? what's the actual problem?

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

How to find out the userid is ddic, how to find out thepassword for this.

hi
i am mohan. We user-id is DDIC. we forgot the password for this user id. how to find out the password for this. we find the table for this usr02. but it is hexa decimal code. how to find that code

hi
check these threads
Re: Check SAP username and password.
Re: Validation of user name, pwd in ZXUSRU01 exit
if helpful, reward
Sathish. R

How to install BPM Enterprise for weblogic

I need to install BPM Enterprise for Weblogic 10.3. However, the weblogic is installed in another machine. BPM and weblogic are installed in different machines.
When I configure the BPM, how to set the weblogic home and workspace folder?

Hi Ruben Vidaurre,
Thanks for your reply.
During the configuration of BPM after installation, I should key in the Weblogic Home address and select a folder for it. I can configure it and know where the weblogic home address is if weblogic server and BPM enterprise for weblogic are installed in the same machine.
How to key in the weblogic home address if the weblogic is installed in another machine (BPM Enterprise for weblogic and weblogic are install in different machine) ?

How to run FVC utility for Weblogic server?

Hi all,
I want to use FVC(Form Version Controller) utility to update the database for some users.
I have provided the required parameters in the "fvc.properties".
When i run the utility from command prompt it is just printing the parameters given in the fvc properties file and the execution stops.
When i check the database nothing is updated.
I'm using BEA-Weblogic Version 8.1 as application server.
But in another environment where I'm using OC4J as application server I'm able to run the FVC utility and it is also updating the database.
Is there any other steps that we have to follow ,if we want to use this utility for Weblogic?
Thanks.

Hi,
The following is script found in fvcutil.cmd
@echo off
setlocal
if "%1" == "" goto usage
if "%2" == "" goto usage
call classpath
set CLASSPATH=%CLASSPATH%;.\lib\xlFvcUtil.jar;.\ext\jbossall-client.jar;.\ext\weblogic.jar;.\ext\oscache.jar;.\ext\javagroups-all.jar;.\ext\commons-logging.jar
D:\oracle_dev_design/xlclient/java\bin\java -DXL.FvcProps=fvc.properties -DXL.HomeDir=. -Djava.security.auth.login.config=.\config\authwl.conf com.thortech.xl.util.fvcutil.FVCUtil %1 %2
goto end
:usage
echo.
echo "USAGE : fvcutil.cmd <USERNAME> <PASSWORD>"
echo.
:end
endlocal
authwl is set properly. But when we run this command we get only parameters given in the fvc property file.
But when we run the same in another environment using (OC4J Application server) we are able to update the database using fvc.
Please guide us out on this regard to execute the same in weblogic server enabled environment.
Thanks

How to find out tcode for the zprogram.

Hi All,
How to find out the Tcode of a Zprogram.
I will appritiate your help.
Thanks,
Veni.

Couple of ways to do this, one is to go to SE93 and do F4 on the transaction code field, click information system, click the all selections icon, then put the name of the z program in the field, and hit enter, this will give you the tcode.
Regards,
RIch Heilman
Message was edited by:
Rich Heilman

How to develop EJB2.0 for Weblogic 7.0 on JBuilder 6

Hi there,
With JBuilder 6, I can develop EJB2.0 stuff for Weblogic 6.1,
but after I updated application server to 7.0, I can't create
any EJB2.0 on JBuilder 6.
Any solution?
Noddy

I will help you with this in a few minutes with separate mail.
Wayne Scott
P.R.Anish wrote:
I have installed Weblogic Server7.0 from the book named BEA Weblogic WorkShop 7.0 .
I am not able to get the licence file .
Pls tell me from where I can get the evaluation licence for that
Regards
Anish

How to Configuring case sensitivity for NFS on Windows Server 2012

Configure Case Sensitivity for File and Folder Names
http://technet.microsoft.com/en-us/library/cc725747.aspx
To configure case sensitivity for file and folder names using the command prompt
Open a command prompt.
To enable case sensitivity, type:
nfsadmin server [ComputerName] config casesensitivelookups=yes
But, "casesensitivelookups" is removed in Windows 2012 version.
Help Me~

Hi,
Sorry for the delayed response.
According to the following article, we still can use
nfsadmin to configure case sensitivity for Server for NFS in Windows Server 2012.
Nfsadmin
http://technet.microsoft.com/en-us/library/cc771599.aspx
Note:We
need to disable Windows kernel case-insensitivity in order for Server for NFS to support case-sensitive file names. We can disable Windows kernel case-insensitivity by clearing the following registry key to 0:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel
DWORD “obcaseinsensitive”
Hope it helps.
Best regards,
Frank Shen

How to find out Sessions in weblogic server

Hi all,
i am new to weblogic and i am struck at these two questions while creating managed servers. Many people questioned me regarding this. Can you all please help me out.
1)Before adding a MS , how can we figure out the current load and what would be the impact/benefit be if we add a MS.
2)How many sessions can be handled by the unix Weblogic server?

HI,
The answer of These kind of questions can be found only after the Load Test on the WLS. Because there is no formula to calculate these things. Because these things totally depends on various different things....Like Operating System, It's RAM, CPUs, JDKs, Application type(EJB, WebServices, Portal, Simple WebApp), Number of Users, The Physical Distance of ManagedServers and DataBases....Network Conjunction...etc
So no one can tell here the exact value. But for performance diagnostics you can refer to *"René van Wijk"* best article to find out these things using small tests as described in the following Link:
Topic: Performing Diagnostics in a WebLogic environment
http://middlewaremagic.com/weblogic/?p=6016

How to configur log4j logging for weblogic 10.1

Hi,
I am tried to set log4j logging for my application running in weblogic 10.1. I set a log4j.properties file and loaded the properties by a servlet. Where its load the properties files and configure it by PropertyConfigurator.
The same logic has worked out in websphere. But in weblogic, it is not working. I set the server logging and domain logging to Log4j in Admin console. Now it is writing all the log statements.
If i write a property for a package to Error level and root level is Debug. Its not working, all debug statements are getting written.
Can you please tell me the steps to configure log4j logging in weblogic 10.1.
Thanks & Regards,
Nasrin.N

Did you manage to get this working?
If yes ... what did you do?
I am having the same problem implementing commons-logging with log4j

How is Default Char encoding for WebLogic determined ?

How is the defualt char encoding for a Weblogic server determined?
We have two environments each running Weblogic 5.1 sp8 on Solaris 7. One is production,other
is for testing.
For testing german characters I use a TestGlobal.jsp to read parameters using
servlet API. From the same browser I access this URL
http://www.xyz.com/TestGlobal.jsp?userName=Tschüß.
In one I get the param Tschüß correct in the other I get Tschýý
I know for sure both the properties file are exactly the same.
I also know that I can work it using the new char encoding property for western
european alphabts. I want to know how does this work without setting the char
encoding prop. How is weblogic recognising Tschüß without this prop being set.
Does the underlying OS make the difference ?
THanks
Atish

In this specific case there are no differences for code points storing character data because used character set is the same.
But what is your Oracle 4 digits version ?
Are you sure that database character set and national character set are the same ?
In recent Oracle versions, database character set and national character set are different. For example:
SQL> select * from nls_database_parameters where parameter like '%SET%';
PARAMETER                      VALUE
NLS_CHARACTERSET               AL32UTF8
NLS_NCHAR_CHARACTERSET         AL16UTF16Edited by: P. Forstmann on 28 sept. 2011 18:51

How to find out URL for ArchiveLink objects?

Hi All,
SCENARIO:
I'm working on "Archive Link", where a document (like word, JPEG photo, etc) is stored on a "Content Server" (specially meant for Database Management System) through a txn code(OAWD).
This is successfully storing the document on the content server.We have 2 options to view this stored document:
1) Use Document Viewer and
2) Use Internet Explorer
By default, system will open this document in Document Viewer. But, we changed it to view in Internet Explorer. It is also showing the document in IE along with a complete URL (system generated), which has details like domain, document ID and so on.
We want to find out where that URL is getting stored in the system (R/3).
Hope somebody would reply to this question.
Thanks in advance
Abdul

Hi there
I have the same requirement as well. Could you provide me with some information on how you resolved this?
Thanks!
Roshan

How to roatate .out fies for weblogic in windows

Similar Messages

Maybe you are looking for