How to schedule multiple wakes up with Terminal

Hello,
I would like to schedule mutliple wakes up for my iMac, in order to keep the network connection, because after 6 hours of innactivity, it disconnects.
I've read that I could type:
pmset [repeat] [wake] [<MTWRFSU> <6:00:00>]
That way, eveyday at 6am it will wake from sleep. But is it possible to add other ones? If I want to wake my iMac every 4 hours during the day. And if so, how can I manage those settings if I want to remove some schedule wakes?
Regards,

You should be able to do this with either Carbon Copy Cloner or SuperDuper!, which allow you to set up scheduled backups:
http://www.bombich.com/index.html
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
I use both, but prefer CCC as it also clones the Recovery HD.

Similar Messages

How to delete multiple data domains with single step ?

how to delete multiple data domains with single step ?

You can go to your Endeca-Server domain home e.g.($WEBLOGIC-HOME$/user_projects/domains/endeca_server_domain/EndecaServer/bin)
run
[HOST]$ ./endeca-cmd.sh list-dd
default is enabled.
GettingStarted is enabled.
endeca is enabled.
BikeStoreTest is enabled.
create a new file from the output just with the domains that you want to delete and then create a loop
[HOST]$ vi delete-dd.list
default
GettingStarted
endeca
BikeStoreTest
[HOST]$ for i in $(cat delete-dd.list); do; ./endeca-cmd.sh delete-dd $i; done
Remember that this can not be undone, unless you have a backup.

How to schedule multiple backup job through windows server backup in windows server 2008 R2

hi expert,
need your help, In my small environment I am using windows 2008 R2 as a domain controller. and installed windows server feature for backup.
Now i want to create backup at a different time.
1. System state backup at 5.00 PM on saturday only
2. finance and hr data backup on daily basis at 5.00 PM.
so how i create different job schedule through windows server backup.
Regards,
Triyambak
Regards, Triyambak

Scenario #1
The following command will create a Task Scheduler task named
DailyFolder1Backup with the start time of 23:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
g:\folder1 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder1Backup /RL HIGHEST /ST 23:00/TR
"wbadmin start backup –backupTarget:F: -include:g\folder1
-vsscopy -quiet"
Scenario #2
The following command will create a Task Scheduler task named
DailyFolder2Backup with the start time of 24:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
h:\folder2 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder2Backup/RL HIGHEST /ST 24:00/TR
"wbadmin start backup –backupTarget:F: -include:h:\folder2
-vsscopy -quiet"
Please feel free to let us know if you have any question or concern.
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How to use multiple midi controllers with Mac book pro (2 usb)?

I have a newer macbook pro that has 2 USB ports, and a lightning port and a firewireport.
On stage I will be using the firewire port connected to a Presonus Firestudio mobile to use as the interface to the house mixer.
I will use 1 USB for my M-audio Axiom 61
I will use the other for my Yamaha WX-5 Wind synth
I'd like to be able to get the apogee midi foot controller to control the playback audio. For example I'll be using it to stay in a solo section, then step on it to move it forward ot the next section when I am done soloing
I'd also like to use some sort of midi switch to turn on vocal effects of the mic.
Anyway since I only have 2 USB ports, how should I connect the 3rd, or 4th USB midi controller?
Will a USB hub work to do this? If so, will I always have to remember to use the same controler in the same exact hub input to make sure everything maps the same?
I guess I'll also have to learn how to setup multiple controllers in Mainstage as well.
Thanks
Dan

Hi there,
is a question which many of us have spent ...
I think the obvious answer is that yes you can use a hub and connect everything. however ....
sincerely advise you to buy a good hub that is well feasible, the last thing you want on stage / rehearsal is one of midi controllers stop responding, or stay with hanged notes... etc., do not buy just because it is cheap it has to be stable and viable, some bring cable for connecting wall power just to not drain power from the USB port.
Other things to try is to distribute as much equipment for USB / Midi.
For example one of midi controllers connect via USB but not by Midi outside the Presonus Firestudio. Connecting Presonus Firestudio to a single USB port as it is a main equipment.
but it really is an issue that greatly limits the use of USB devices.
Try it and tell me how it went. Good luck
(sorry for my english i´m Portuguese)

How to send multiple attachment s with a mail??

Hi,
How to send multiple attachments with a mail??
Situation::
In my case i have 5 internal tables populated dynamically in the report.
I want to send them in .TXT format as attachment with 1 mail.
Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
how we add multiple attachmants to table objin???
thanks,
deepak

Hi Deepak,
Please find the sample code for sending mail with multiple attachment.
Report ZPAN_02M                                        *
REPORT zpan_02m                                .
*-MAIN DECLARATION----
DATA: docdata    LIKE sodocchgi1,
      objpack    LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
      objhead    LIKE solisti1   OCCURS 1 WITH HEADER LINE,
      objtxt     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objbin     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objhex     LIKE solix      OCCURS 10 WITH HEADER LINE,
      reclist    LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*-OTHER DECLARATIONS----
DATA : listobject   LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA : tab_lines(3) TYPE n.
DATA : att_type     LIKE soodk-objtp.
*OBJBIN = ' | '. APPEND OBJBIN.
*---For simple attachment -
DATA : BEGIN OF wi_data OCCURS 0,
         c1(10),
         c2(10),
       END OF wi_data.
wi_data-c1 = 'Line 1'.   wi_data-c2 = 'Line 1'. APPEND wi_data.
wi_data-c1 = 'Line 2'.   wi_data-c2 = 'Line 2'. APPEND wi_data.
wi_data-c1 = 'Line 3'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 4'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 5'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 6'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 7'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 8'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 9'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 10'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 11'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 12'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 13'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 14'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 15'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 16'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 17'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 18'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 19'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 20'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 21'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 22'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 23'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 24'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 25'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 26'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF,
    con_nwln type c value cl_abap_char_utilities=>NEWLINE.
LOOP AT wi_data.
CONCATENATE wi_data-c1 con_tab
              wi_data-c2
            INTO objbin.
condense objbin.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
ENDLOOP.
*---CREATE MESSAGE : DOCDATA -
Name
docdata-obj_name = 'TEST_ALI'.
Subject
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
*---CREATE MESSAGE : BODY -
objtxt = 'Test Document.'.
APPEND objtxt.
objtxt = 'You will find an ALI/HTML attachment in this message.'.
APPEND objtxt.
objtxt = 'Have a nice day.'.
APPEND objtxt.
*-CREATE PACKING LIST-----TEXT--
objpack-head_start = 1.
DESCRIBE TABLE objtxt LINES tab_lines.
READ     TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
*-CREATE PACKING LIST-----ATTACHMENT--
att_type = 'XLS'.
DESCRIBE TABLE objbin LINES tab_lines.
READ     TABLE objbin INDEX tab_lines.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 1'.
objpack-obj_descr = 'Attached Document 1'.
APPEND objpack.
att_type = 'XLS'.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 14.
objpack-head_num   = 14.
objpack-body_start = 14.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 2'.
objpack-obj_descr = 'Attached Document 2'.
APPEND objpack.
*-CREATE RECEIVER LIST----
reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
APPEND reclist.
reclist-receiver = sy-uname.               reclist-rec_type = 'B'.
APPEND reclist.
*-SEND MESSAGE----
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data                     = docdata
    put_in_outbox                     = 'X'
    commit_work                       = 'X'
IMPORTING
SENT_TO_ALL                       =
NEW_OBJECT_ID                     =
TABLES
    packing_list                      = objpack
    object_header                     = objhead
    contents_bin                      = objbin
    contents_txt                      = objtxt
CONTENTS_HEX                      = objhex
OBJECT_PARA                       =
OBJECT_PARB                       =
    receivers                         = reclist
   EXCEPTIONS
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
     parameter_error                  = 5
     x_error                          = 6
     enqueue_error                    = 7
     OTHERS                           = 8.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
              WITH output = 'X'
              AND RETURN.
Hope this is enough for you...
Enjoy SAP.
Pankaj Singh.

How to implement Multiple Roadmap step with in a roadMap

Hi,
I am trying to implement Multiple roadmap step with in a roadMap.Can any one help me on this how to do it.
As of now i have added Multiple roadmap step element with in my Road map navigation and assign a data source which contains single attribute steps. I am stuck here open question like
1) How i map the view accordingly with the steps that are dynamically created
2) Weather i have to create dynamic plugs? to handle it
Can any one help me out or if you have any sample implementation please guide me through that link.
Thanks in advance.
Regards,
Karthikeyan R

Hi,
1. In the View add a RoadMapUI element.
2. Right click->Insert Steps (as many as required)
3. Set the design property of the Roadmap step as standard / selected (Highlighted if set to "Selected")
This is for a static approach i.e if there are 3 views, then in all the three views u repeat the procedure above and set the property as Selected for the required step.
For dynamic selection of roadmap, bind the design property to context attribute of type WDRoadMapDesign and set the property thru code.
Hope this helps you.
Regards,
Poojith MV

How to read multiple arguments separated with space in one line

How to modify the
public static void main (String[] args){
}so that it can read multiple arguments separated with space in a single line?
e.g.
java myprogram username password host
java myprogram2 ipaddress port
Thx.

public static void main (String[] args){
int index = 0;
for(String arg : args) {
System.out.println("args["+(index++)+" = "+arg);
}

How to schedule multiple BDLS

Hi
Logically, we should be able to schedule multiple BDLS jobs for different selection of tables. But when I schedule second job, it either runs into error or completes without considering the table selection.
Is there any procedure for scheduling multiple BDLS jobs or the parallel BDLS execution functionality does not exist ?
Thanks & Regards
Madhu

No Roel,
I think I took the wrong term. We have several logical system landscapes in 1 maintenance cycle.
For instance:
Maintenance cycle 1 contains:
landscape R3
     DEV
     QAS
     PRD
landscpae BW
     BD0
     BA0
     BP0
landscape SRM
     ED0
     EA0
     EP0
If I want to schedule an import job to import all transports of maintenance cycle 1 in all systems, I have in the above example to schedule 3 jobs. (1 in PRD, 1 in BP0 and 1 in EP0)
The question is whether I can do this by 1 action. Schedule the import of all PRD systems on the maintenance level in stead of the landscape levels separately.
kind regards,
David

How to schedule multiple reports with different local to change static field language ?

Hi all,
we have requirement that we will place multiple schedule request on same server ,This schedule request will be different local setting with parameter value like: en-GB,en-US,Chinese...etc .We used translation Manager for this and it takes this parameter and change report language for static fields.
problem is that ,on server it is not working properly,we tested for one report .if we pass prompt value to change local setting in report the we need to log off and login again in CMC to reflect new local or on BI Launchpad we need to refresh page then it shows new language.
How we can do this with multiple scheduled report which will have different local value like en-GB,en-US,Chinese,German....?These schedule request are getting placed in server by one user .
Please help us with sample code.
Thanks
Madan

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

How to handle multiple inbound interfaces with WSDL messages

Hi All,
We have a synchronous: Abap Proxy -> XI -> WebService Scenario. The webservice has multiple SoapActions e.g. SearchForProduct_WithX, SearchForProduct_WithY each with different message types. We have tried to use the receiver determination to send the request to the correct soapaction using conditions e.g. if field X in the request is populated use SearchForProduct_WithX action/message.
But when we run it through the proxy we get this error:
<CODE>IF_DETERMINATION.TOO_MANY_IIFS_CASE_BE</CODE>
<ERRORTEXT>Multiple inbound interfaces not supported for synchronous calls</ERRORTEXT>
Does anybody know how we can get around this or how best to deal with the multiple soap actions per wsdl situation.

Hi Yaghya,
We have used conditions in the Interface Determination. Interestingly if we use an HTTP sender adapter we can use this configuration ... but once we try and use ABAP proxies we get the previous error.
Another related question ... when we use the http adapter we get a connection time out exception. Same thing happens if we try and use the wsdl tester at /wsnavigator but we can open the wsdl through the browser. Any idea on this one?
Thanks for all your help.

Multiple process start with terminal?

How do I open multiple programs at one? I need it to open an executable, leave it running, open another executable. I'm not sure how to do this branch thing in the terminal
I want to use this for an .sh script
Last edited by caelestis (2009-04-29 22:52:18)

If you want to run a program non-interactively, you can append "&" to the end of the line to send the process to the background, e.g.
somescript &
anotherscript &

How to create multiple expanding outlines with all points equal distance to original shape?

Here's an extremely simple example.. It works with a circle or a square, obviously because it has the same height and width. The problem is when you have irregular shapes, (or in this case, an oval). I know I've seen solutions to this in the past, but I just can't think of how to word this question and find them again.
I know you can create multiple strokes for an object in the appearance palette, but I'm looking for something more effective than just having colored stroke > white stroke > colored stroke> white stroke > etc.
Here's a couple examples of the kind of effect I'm looking for.
Any help would be greatly appreciated.

You need to use Offset path. Object>Path>Offset path. Use negative numbers to go inside of an existing shape, positive to go outside.
[ signature removed by forum host - advertising is not permitted ]

How to update multiple Sales Orders with one IDOC using IDOC_INPUT_ORDCHG

Hi Gurus,
Here's my scenario:
Consider there are 2 Sales Orders for same Purchase Order -
Open Quantity
Sales Order 1
Article A1
1
Sales Order 2
Article A2
1
Say if I want to change Open Quantity of both SO 1 & SO2 by dispatching 1 Quantity each for Article A1 and A2 via ORDCHG, observed that in Include LVEDBF0N, XVBAK-VBELN is checked for only 1 Sales Order.
Whether it is possible to update multiple SOs with one IDOC using IDOC_INPUT_ORDCHG?

Hi,
Check out this link, this deals with the problem you are facing.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Regards,
Runal

ME05 How to schedule source list job with steps?

Can someone please give me instructions on how to create source list ME05 in background using "Steps"? I know how to create a background job in ME05 but need to have several jobs run back to back in the middle of the night. I am reluctant to shedule them at different times and would prefer to use the "Steps" function. Thanks for your input!

Hello
Steps:
First create variant for the report in normal execution mode (to provide input selection parameters in backgrpund)
1. Transaion code SM36
Give Job name you want created (Give some meaningful name) and Press enter
2. Give the ABAP program name
3. Select variant and save the selections
4. Come back to initial screen , select the Start condition button and provide the interval as per requirement to schedule the job and save.
5. Save the job.
Check the Job in SM37 and relase the Job.
warm regards
Rama

How to use multiple closed MBPs with KVM?

I have an unusual problem I'd eagerly welcome help with:
I have four MacBook Pros (from 2006-2010) that I use in my day-to-day work, since each of them can run an instance of the client software I work on.
As you imagine, this consumes a fair amount of desk space having them side-by-side, as well as the seeming redundancy of having each one's screen showing, since I actually only need to focus on one at a time (commanding it to do tasks I can background for awhile). In addition, I prefer to use the mouse over the trackpad whenever possible.
So I had an inspired idea: I read that you can run a MBP in closed clamshell mode while hooked to an external display. That got me thinking, hmmm, what if I stacked these MBPs in one pile and connected them all to a 4-port KVM, so I could share a monitor, keyboard, and mouse among them?
Then I saw the prices of some 4-port KVMs, and they get fairly pricey, so I'd like to learn from others' experiences on the following specific questions:
Are there heat issues I need to be concerned about? The software I work with tends to ramp up a MBP's fans pretty loud.
Are there KVMs that are known to work best with this config? Some seem more Mac-friendly than others but the ones I'm looking at (Gefen, IOGear) all get mixed reviews thus far. 4 computers sharing 1 DVI display + USB keyboard and mouse seems fine, as 4 sharing 2 seems to jack up the price a lot more, and I don't have a specific need for two monitors.
I've previously gleaned some info about MBPs with KVMs, but haven't come across a setup like the one I'm suggesting. Thanks so much in advance!

I'd say that you ought to look at using class and id attributes in your table elements.
If you have two tables and want seperate color schemes use an id on the <table> element. Then you can select that table in your CSS quite easily.
<table id="greenScheme">
<table id="blueScheme">
#greenScheme tr {
One set of rules here
#blueScheme tr {
Another set of rules here
I don't/haven't used tables that much myself so don't feel confident about writing out some sample CSS for you here. However, it shouldn't be too difficult to work out. Also, I did a fancy table not long ago to put up a price table in a site. A quick google on something like style tables CSS will bring up plenty of tutorial type stuff on styling tables that won't be too arduous.
Martin
Tricia0131 wrote:
searched this site and found this question many times, but all answers suggest how to do it in CSS code.
That might be because it's the best way to do it ;-)

How to schedule multiple wakes up with Terminal

Similar Messages

Maybe you are looking for