How to see new user in RPD (Admin tool) 11g

Hi all,
I am trying to create new user in OBIEE 11g. I did everthing from this blog http://varanasisaichand.blogspot.com/2011/03/obiee-11g-security-creating-users-and.html
Why I am not able to se new user in Identitiy in Admin tool? What am I missing.
Thanks
P.S. I found in documentation that "The screenshot below shows the Identity Manager dialog, which enables you to manage users and Application roles." http://docs.oracle.com/cd/E25054_01/bi.1111/e10543/intro.htm (1.6.3 Oracle BI Administration Tool)

Hi,
yeah when i put * in the set online filter i am able to see the users which i have created in weblogic. After all the users appear then i select Action-> close. Now again when i try to cross check it once again i again clicked on manage->indentity->now i dont see the users. what could be the issue?
Thanks,
RM

Similar Messages

HT2542 Hi, I created a new user on mac, Admin but i can't use adobe CS6 while the original user is admin too and all programs are running normal. How can i solve this problem?

Hi, I created a new user on mac, Admin but I can't use adobe CS6 while the original user is admin too and all programs are running normal. How can I solve this problem?

Hi Amanda,
Software applications are usually installed in the Applications folder on the Macintosh HD and are accessible to all users.
I would advise you to check the Applications folder and see if your software is in there.
Next step would be to Control Click or Right Click on the application and choose "Get Info" and make sure the permissions are set to "Read & Write" for all users. The article below provides more details:
Troubleshooting permissions issues in Mac OS X
http://support.apple.com/kb/ht2963
You may need to contact Adobe Support if this does not resolve your issue:
http://helpx.adobe.com/photoshop.html
Hope this information helps!
- Judy

How to create new user for OBIEE presentation service

Hello Guys
I now only have 2 users on my OBIEE, demo1, demo2.. Now I'd like to create a new user call A and make this new user able to log on to OBIEE presenation service..
So I went to the RPD admin tool and created new user there and gave password. It was done online mode and I checked out..
I am able to login to admin tool with the new user account, but when I go to presentation service, I am not able to see this new user nor would I be able to log on using the new user account..
So how does this work? If I wanted to create a new user and let it access dashboard, I'd I do it
Any pointer will be greatly appreciated
Thanks

Hi.
actually there is no option available in presentation service to create user. There you can just delete user and create and delete the groups.
Anyhow, you said you have created a user in rpd.
To see this user in answers, you must login into answers with this user once.
are you able to login with the newly created user?
(As you said you done the creation of user in online mode, this may not effect to the answers)
if not, just login with administrator into answers, click on reload server metadata, then log off from there.
Now, try to login with the new user. You may able to login.
OR
just restart your BI Server services.

How to see wifi users on my network

How to see wifi users on my network.
My new router simply slows down at times for no apparent reason.
Every time I restart it (unplug) th speed pops back up.
I think my neighbor may e watching a ton of movies or something.

What new router do you have?
If it is Apple, see below.
Open up Airport Utility in your Utilities folder.
Option/Double click your Airport Base station.
There you can see all the wireless clients that are on your network.

How to crate new user in adf security using jspx page

how to crate new user in adf security using code in java file.plz help me this work will submited to day plz help me...

sigh
Search really would help and point you in the right direction. You'd find [url http://forums.oracle.com/forums/thread.jspa?messageID=4584464]this, for example.

How to see the users list in BO

I am working on BO 6.5 supervisor and would like to know the steps how to see the user count? Your help is appreciated.
Kumar

Hi Denis,
Thanks very much for the link. I have this doc with me, but I could not find a way to see the total number of users. All I can see is the user groups and manage users. My specific need is to see the total users in the system. Appreciate a clarification.
Kumar

How to see all users who are allowed permissions for the specified entity ?

How to see all users who are allowed permissions for the specified entity ?
And change user permissions for the current entity
from Moscow with money

Vincent,
... and how to change entity permissions for some users?
from Moscow with money

How to see other users gift list in atg

Hi Guys,
As Giftlist are public we can see other user giftlists also
could you please tell me how to see other users giftlists in atg ?

There is an example of this in the demo CRS application (Page store.war/giftlists/giftListSerach.jsp)From the docs:
The /atg/commerce/gifts/GiftlistSearch form handler searches the repository for gift lists. The form handler uses input from the customer, such as owner name, event name, event type and state, to find gift lists published by other customers. It returns a list of gift lists that match the given criteria.
GiftlistSearch should be session-scoped because multiple pages are typically involved in gathering and displaying information for gift list searching (for example, you might want to maintain a list of results for paging purposes). This form handler uses supporting servlet beans to add the retrieved gift lists to the customer’s profile and to display gift list contents.

How to register new users through lotus domino administrator

how to register new users through lotus domino administrator

Hello Rahul,
could you be more precise: Where do you want to register users?
There are two options:
(1) you want to simultaneously create users in Domino and in the SAP EP portal database: then you should prepare the users in text files.
(1a) one for the EP users:
http://help.sap.com/saphelp_nw04/helpdata/en/52/96f03eae11e16be10000000a114084/frameset.htm
(1b) one for the Domino users:
http://www-10.lotus.com/ldd/today.nsf/0/e586b1de8c52125a852568d2004c1b50?OpenDocument#Migration%20and%20text%20file%20import
then you can use those files in the Domino/EP user administration for batch user creation.
(2) you want to use users stored in the Domino directory in SAP Enterprise Portal via LDAP: please read the thread in the SAP-IBM interoperability forum: Interoperability IBM where this question is alredy answered.
Regards
Michael

To create new user for rpd with Admin access in obiee 10g

Hi All,
I need to create a user in RPD which has equivalent privileges as Administrator in RPD.Please note that this is for accessing RPD Admin not for Dashboard admin access.Can anyone please let me know of how we shall implement this?..
Regards,
Vengatesh.

Hi,
Create a user and give the check box for 'Administrators' group and check.
If required give 'Presentation Service Administrator'group too.
In Settings->Manage Privileges you can restrict the user to the Answers.
Hope this helped/ answered
Kind Regards
MuRam

How to create new user, with same personal files, for troubleshooting?

I cannot find this answer in "Finder Help", nor in the Community discussions thus far. What I must do to troubleshoot the spinnign beach ball: My next step: I must troubleshoot my friend's iMac running Mac O.S 10.6.8 by setting up a new user, called "Test". This I can do easily. However, what I am unsure of is this: as this "new user", actually just me as a tester, I must be able to access the same email, Word files, Desktop, photos, etc. that I used to access. How, then? Copy all into a shared folder or what? There must be a less cumbersome way. I do NOT wish to delete anything. Of course, I have justmade a perfect backup of everything on my hard drive. Please advise re my next step: sharing the "User" little house files, with myself, as the new, possilbly temporary, user. Thank you so much, anyone and everyone!

You shouldn't do any of that for troubleshooting. The test user account should be pristine. If you copy stuff from the old account, then you also copy whatever is causing a problem.
Just use the Accounts/Users & Groups preferences to create a second user called, "test." Make this user an admin user. Then log out of the old account and log into the new one. That's it. You can still access and use applications in the Applications folder if you need to test third-party applications.
We could be more helpful if you explain just what you need to troubleshoot. If just the spinning beachball is your issue, then visit The XLab FAQs and read the FAQ on resolving the SBOD problem.
If the computer is simply running slowly then read the following:
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

How to create new user and How can i assign end user roles

Hi,
I am new to SAP, please explain how to create end users and their roles
Thanks
ravi

Hi,
Roles are decided by IT managers. Suppose if Persons who are working in shopfloor or production side
give authorization to Production order create , change and Confirm like that etc
1. In role maintenance (transaction PFCG), choose the Authorizations tab page.
2. To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation. Otherwise, a dialog box appears in expert mode (see Regenerating an Authorization Profile After Changes).
Please take telp from Basis person also refer this link,
http://help.sap.com/saphelp_46c/helpdata/EN/52/6714a9439b11d1896f0000e8322d00/frameset.htm
Thanks

CHARM how to add new user status to change document

Can someone please suggest how to add a new user status to a change document ?
I am looking into adding status "Pending" to Admin correction SDAD.
Thank you in advance
Elena

Hello,
Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
SAP Solution Manager
-> Scenario-Specific Settings
-> Change Request Management
   -> Extended Configuration
    -> Change Request Management
     -> Change Transaction
      -> Change Transaction Types
        o Define Status Attributes
Also activity "Make Settings for Change Transaction Types" in the same path is important.
Best regards,
Miguel Ariñ

Can only see User Management in Admin Tools

I configured an LDAP realm and included the required admin group to access
the Administration Tools. However, the only thing I can see in
Administration Tools is User Management. Why is that?

Wendy,
Would it be possible for you to send us a file from your LDAP directory
server? Please forward this information to the support case you have open.
In the \iPlanet\Servers\slapd-yourhost\config directory.
Send the dse.ldif file.
Basically what we want to do is to compare the user and group dn values
specified in the vlvBase lines with your config.xml. Also grab the
string that starts with creatorsname ... look for something like
creatorsName:
uid=admin,ou=administrators,ou=topologymanagement,o=netscaperoot
The principal value in the config.xml will be the creatorsName string.
Set the principal string in config.xml should be something like
Principal="uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot"
unless your iPlanet schema has been changed.
So, in the config.xml LDAPRealm definition explicitly set Group is context.
GroupIsContext="false"
Set the AuthProtocol to simple.
Your config.xml LDAPRealm definition should have 13 fields and look
something like:
<LDAPRealm
AuthProtocol="simple"
Credential="password"
GroupDN="o=beasys.com, ou=Groups"
GroupIsContext="false"
GroupNameAttribute="cn"
GroupUsernameAttribute="uniquemember"
LDAPURL="ldap://myhost.beasys.com:389"
Name="myLdapRealmV1"
Principal="uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot"
SSLEnable="false"
UserAuthentication="bind"
UserDN="o=beasys.com, ou=People"
UserNameAttribute="uid"/>
-- Jim
Wendy Kajiyama wrote:
Hi,
iPlanet 5.0, no service pack.
I got the user and group DN from our Network Admin.
"Jim Litton" <[email protected]> wrote in message
news:[email protected]...
Wendy,
Can you also supply the vendor and version number of your directory
server?
I was looking at your config.xml from your support case and I am
unfamiliar with the user DN and group DN strings you are using.
Where did you find the syntax for those strings? Is that particular
string syntax documented somewhere on the LDAP vendors site?
Jim Litton
Developer Relations
Ture Hoefner wrote:
Hello Wendy,
I suspect a configuration problem in the LDAPRealm, but it is possible
that you have a P13N-only license. That is probably a long-shot because
I
don't know if we sell those any more. You are using Portal 7.0, right?
I can try to help... can you answer these questions:
* which version?
* After you log into as "administrator" (who is a member of
"SystemAdministrator"), can you access the Group Management tools and
see
the "SystemAdministrator" group and the list of users who belong to that
group?
* Do the all of the users and groups that you see match what you have
in
your LDAP server?
"Wendy Kajiyama" <[email protected]> wrote in message
news:[email protected]...
Hi Ture,
Thanks for your reply. Unfortunately, after contacting support and
receiving the patch for LDAP I am still having the problem of not being
able
to see the icons in Admin Tools.
Any other ideas?
Thanks,
wendy
"Ture Hoefner" <replyto@newsgroup> wrote in message
news:[email protected]...
Hi Wendy,
Which version?
After you log into as "administrator" (who is a member of
"SystemAdministrator"), can you access the Group Management tools and
see
the "SystemAdministrator" group and the list of users who belong to
that
group? Does it match what you have in your LDAP server? If you cannot
list
members of groups in your Portal JSP admin tool then contact support
and
ask
for the patch that fully enables WLS's LDAPRealm for use with Portal
(it
is
CR070870 for Portal 4.0, I don't know if there is a patch for 7.0, or
if
it
is included in a SP for 7.0...)
If you are able to list the users in a group then make sure you have
the
group "SystemAdministrator", not "SystemAdministrators".
I've used delegated portal administration with LDAPRealm for 7.0 so I
know
it works. I suspect a configuration issue. I will try to help you
figure
it out.
"Wendy Kajiyama" <[email protected]> wrote in message
news:[email protected]...
yup, i set up LDAP to have the required administrator groups and log
in
the
admin tools as administrator which is a user in the
SystemAdministrator
group.
"kurt c" <[email protected]> wrote in message
news:[email protected]...
could this not be a permissions issue? are you logged in as
'administrator'?
"Wendy Kajiyama" <[email protected]> wrote:
I checked to see if ebusiness.jar was in my application and it's
there.
Any
other ideas?
Thanks!
wendy
"Peter Laird" <[email protected]> wrote in message
news:[email protected]...
Wendy,
You may be seeing CR081150, which is a bug report regarding the
removal
of
ebusiness.jar
from your application. If you remove this JAR, the admin tool
fails
to
load certain
EJBs which cause it to only display more than the user tool. The
workaround is
to put ebusiness.jar back into your applicaiton. If this is
unacceptable,
contact
Support and they will work with you.
Cheers,
PJL
"Wendy Kajiyama" <[email protected]> wrote:
I configured an LDAP realm and included the required admin group
to
access
the Administration Tools. However, the only thing I can see in
Administration Tools is User Management. Why is that?

How to Create New users in 9.3.1

Hi All,
Could you please tell me how to create the new users and their groups for sepecific cube in 9.3.1 version and how to grant the permission roles.
Will Shared Services does the above actions. if yes could you please let me know the steps to create the new users.
Thanks in Advance,
Raj.

Hi,
Here is how to create users in Shared Services :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_cas_help/crtuser.htm
The rest of the information for Shared Services is in :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_cas_help/frameset.htm?apc.html
Cheers
John
http://john-goodwin.blogspot.com/

How to see new user in RPD (Admin tool) 11g

Similar Messages

Maybe you are looking for