How to send Messages to JMS through ABAP

Hi,
I have to send messages to JMS through abap, how to do it.
step by step is helpful

Hi,
You will have to write proxy to Jms to transfer data from R/3 to receiever via JMS.
Follow this blogs it will be helpfull :
Re: Proxy->XI->JMS
For configuring receiver JMS:
http://help.sap.com/saphelp_nw2004s/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
For configuring ABAP proxies etc:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Thanks,
Arijit Guha.

Similar Messages

In solman 4.0 how to send message to SAP through service desk

Dear all,
I have configured service desk functionality, My requirement is from service desk how to send message to SAP.
Regards,
Pavan.

Hi,
Following the steps:
Basic configuration - RFC Connections to SAP
Check if the RFC Connectino SAPOSS is working properly
Check if load distribution group is set to EWA
The RFC Connections:
- SAP-OSS (Send Message to SAP)
- SAP-OSS-LIST-O01 (Update Message from SAP)
will be created automatically by the system with a user which has been assigned
previously.
IMG Path: SAP Web Application Server | SAP Web Application Server | SAP Solution Manager| Basic Settings | SAP Solution Manager System | Connection to SAP | Assign user for forwarding Service Desk Message
With transaction SM59 you can adjust the RFC connections.
- For further information on SAP R/3 Front-end connections, see SAP Notes: 33135, 766505, 24177
- To forward Service Desk notifications and Issues to SAP, you need to assign a user to the SAPNet R/3
Front-end connection to SAP.
Activities:
- 1. From the SAP Solution Manager (transaction SOLUTION_MANAGER), choose (Edit-> Global Settings.
- 2. Choose Display<->Change.
- 3. For SAP Service Marketplace, specify http://service.sap.com as the URL.
- 4. In the Connection to SAP tab, specify SAPOSS as the RFC destination. Note that the entry is casesensitive.
- 5. For User forwading messages, enter a valid user and a password. This user will require all the authorizations for SAPNet R/3 Front-end for your customer number.
- 6. Save your changes.
The system automatically generates the following RFC destinations and assigns the S-User and password you specified: SAP-OSS, SAP-OSS-LIST-O01
Good Lucky!

How to send message from Message Driven Bean to JMS client?

In my project I have JMS client, two QueueConnectionFactory and Message Driven Bean. Client send message to MDB through the first QueueConnectionFactory , in one's turn MDB send message to client through the second Queue Connection Factory . I already config my Sun AppServer for sending message in one way, and sending message from MDB to the second QueueConnectionFactory. But on my Client there is an error : �JNDI lookup failed: javax.naming.NameNotFoundException: No object bound to name java:comp/env/jms/MyQueue2� (jms/MyQueue2 � this is the name of my Queue). So it couldn't get this message.
P.S.
Thank you for help!!!

What is the name of the second queue?is the connection factory on the local?Yes the connection factory is on the local. The name of my first queue is jms/MYQueue and the name of another one is jms/MyQueue2.

How to send messages to the specified user through sap

how to send messages to the specified user through sap

Hi Santosh,
try:
    CALL FUNCTION 'TH_POPUP'
         EXPORTING
              CLIENT         = SY-MANDT
              USER           = BNAME "User you want
              MESSAGE        = MSG "text you want
         EXCEPTIONS
              USER_NOT_FOUND = 1.
Regards, Dieter

How to send a smartform result through mail?

How to send a smartform result through mail?

HI,
YOu can convert the output of Smartform into a attachment say PDF file & then send it across through mail.
Refer following program:
<a href="http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm">http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm</a>
Best regards,
Prashant

How to send messages in iChat in plain text? (no html)

How to send messages in iChat in plain text? I don't need any formatting nor hiding links in achor tags.

HI,
In the View Menu once you have a Chat window open is the Messages item which allows you to change the style of the IM.
However this still sends a HTML like packet for dispalyiing the info at the other end.
This does not work to ICQ users.
Chax, an iChat Add-on, works in iChat 5 and lower (although there are then different versions) and can strip out the HTML part for sending to ICQ users.
However there is not yet a Lion/iChat 6 version.
8:43 PM Monday; December 12, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to send message to a multi-consumer queue using pl/sql

How to send message to a multi-consumer queue using pl/sql ? Thanks.
I tried following, but got an message: no receipient specified.
DBMS_AQ.ENQUEUE(
queue_name => 'aqadm.multi_queue',
enqueue_options => queue_options,
message_properties => message_properties,
payload => my_message,
msgid => message_id);
COMMIT;
END;
/

Here's two way to enqueue/publish new message into multi-consumer queue.
(1) Use explicitly declared recipient list
- Specify "Recipients" by setting recipient_list to messge_properties, before ENQUEUE().
DECLARE
recipients DBMS_AQ.aq$_recipient_list_t;
BEGIN
recipients(1) := sys.aq$_agent('RECIPIENTNAME',NULL,NULL);
message_properties.recipient_list := recipients ;
(2)Or, declare subscriber list permanently. Then you need not to specify recipient list each time you call ENQUEUE().
begin
dbms_aqadm.add_subscriber(
queue_name=>'YOURQUEUE',
subscriber=> sys.aq$_agent('RECIPIENTNAME', null, null)
end;
You can add 1024 local subscriber include maximum 32 remote-queue-consumer to one queue.

Publish/Send messages in JMS to be delivered after some time

I would like to know if the JMS standards address publishing of a message to a Topic or send to a queue which becomes visible or becomes eligible for subscribers to retrieve the message after a certain amount of time.
In other words I would like to send messages to JMS such that a JMS subscriber can use the feature as a wake up call. Here the sending application sets the time at which subscriber will get the wake up call ( message ).

I would like to know if the JMS standards address
publishing of a message to a Topic or send to a queue
which becomes visible or becomes eligible for
subscribers to retrieve the message after a certain
amount of time. Some JMS products provide this functionality. Weblogic and SwiftMQ. The latter has an integrated Job Scheduler:
http://www.swiftmq.com/products/router/swiftlets/scheduler/index.html
To solve your problem you'd create a message schedule:
http://www.swiftmq.com/products/router/swiftlets/scheduler/messagejobs/index.html
-- Andreas

How to put message in JMS topic

Hello,
AnyOne can tell me how to put messages in JMS topic ?? Any sample / example available on it ?? I am using Oracle SOA 10g.
Thanks

Try this link:-
http://jamessmith73.wordpress.com/oracle-soa-bpm-11g/bpm-and-jms-adapters/
It have a good example on JMS Consumer and producer.

How to send messages via shareobject in FMS

How to send messages via shareobject in FMS
I need some codes.
I want to send some string messages via shareobject, the
string messages can be retrieve in client.
Can you give me some codes? Thank you for your help..
/

Thanks for your comment.
en....I want to do something..I will maintenance a users list
in charroom.
I write a function in main.asc file , client can get users
list via call the function.
I write some codes in application.onConnect
when a user connect, it will add users list.
In application.onDisconnect, when a user disconnect, it will
remove from users list.
My hope when a user disconnect, I send a message to
shareobject. the shareobject is called in other clients.
Other client can retrieve the remove user message, they will
call the function to get new users list.
It is my idea. Can you give me some codes for my idea?
Thank you very much.

Will turning iMessage of not send messages from iPhones through carrier

IIf iMessage is off then will it not send messages from iPhones through carrier

I have iMessage off on my iPhone and it sends and receives texts from everyone, including iPhone users, via the cellular carrier (i.e., SMS & MMS).

I don't know how to send message to my friends via message

I downloaded mountain lion yesterday but I don't know how to send message to the imessage on ipad or iphone. The account of my friend's seems doesn't work and I have no access to sending message to that account.

Welcome to Apple Communities
Press the + button to select a contact. Then, write whatever you want in the white box and press Enter key. You can use it with contacts with iPhone, iPod touch, iPad or Mac with Mountain Lion

How to send message to MDB from different clients.

Hi,
I want to know how to send message to a Message Driven Bean residing in EJB container from
1. Web Component
2. Application Client
3. Another Entity Bean
4. Non J2EE client.
If you provide me any tutorial link on this it would be really helpful.
Thanks for the time.

Hi,
refer to http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/MDB.html#74108
Seetesh

How to send message to non android mobiles?

I am not able send SMS to other mobile etc. SMS are being sent as iMessages only to apple products. How to send messages to others?

The iPad cannot send SMS texts - it is not a cellular phone, and SMS texting is a cellular phone feature (SMS uses the voice channel to send).
You will have to get a 3rd party app to send SMS texts by internet - check the App store for what is avaialble.
You can also send SMS texts as email if you know the persons phone number and their carrier, using their carrier's email-to-text gateway
see http://en.wikipedia.org/wiki/List_of_SMS_gateways for a list of carriers and their gateway addresses.

How to send message/traffic accross VME bus from NI's VME MXI-2 card So I can monitor messages via vmetro card?

Hi,
How to send message/traffic accross VME bus backplane from NI's VME MXI-2 card?
So that I can monitor messages via vmetro card/BusView?
Thanks
DBhagat

Hi Dbhagat,
The VME-MXI-2 card is a type of VME controller, which is used in conjunction with a PCI-MXI-2 card that will be in an external computer. This computer is then able to send and receive messages to other devices on the VME bus, as well as monitor the information on the bus.
Hope this helps!
john
Applications Engineer

How to send Messages to JMS through ABAP

Similar Messages

Maybe you are looking for